Nanofibrous Aerogels with Vertically Aligned Microchannels for Efficient Solar Steam Generation

Recent Advances in Fibrous Materials for Hydroelectricity Generation

Depleting fossil energy sources and conventional polluting power generation pose a threat to sustainable development. Hydroelectricity generation from ubiquitous and spontaneous phase transitions between liquid and gaseous water has been considered a promising strategy for mitigating the energy crisis. Fibrous materials with unique flexibility, processability, multifunctionality, and practicability have been widely applied for fibrous materials-based hydroelectricity generation (FHG). In this review, the power generation mechanisms, design principles, and electricity enhancement factors of FHG are first introduced. Then, the fabrication strategies and characteristics of varied constructions including 1D fiber, 1D yarn, 2D fabric, 2D membrane, 3D fibrous framework, and 3D fibrous gel are demonstrated. Afterward, the advanced functions of FHG during water harvesting, proton dissociation, ion separation, and charge accumulation processes are analyzed in detail. Moreover, the potential applications including power supply, energy storage, electrical sensor, and information expression are also discussed. Finally, some existing challenges are considered and prospects for future development are sincerely proposed.

Fully Floatable Mortise-and-Tenon Architecture for Synergistically Photo/Sono-Driven Evaporation Desalination and Plastic-Enabled Value-Added Co-Conversion of H2O and CO2

Establishing an advanced ecosystem incorporating freshwater harvesting, plastic utilization, and clean fuel acquisition is profoundly significant. However, low-efficiency evaporation, single energy utilization, and catalyst leakage severely hinder sustainable development. Herein, a nanofiber-based mortise-and-tenon structural Janus aerogel (MTSJA) is strategically designed in the first attempt and supports Z-scheme catalysts. By harnessing of the upper hydrophilic layer with hydrophilic channels embedding into the hydrophobic bottom layer to achieve tailoring bottom wettability states. MTSJA is capable of a fully-floating function for lower heat loss, water supply, and high-efficiency solar-to-vapor conversion. Benefiting from the ultrasonic cavitation effect and high sensitivity of materials to mechanical forces, this is also the first demonstration of synergistic solar and ultrasound fields to power simultaneous evaporation desalination and waste plastics as reusable substrates generating fuel energy. The system enables persistent desalination with an exceptional evaporation rate of 3.1 kg m-2 h-1 and 82.3% efficiency (21 wt.% NaCl solution and 1 sun), and realizes H2, CO, and CH4 yields with 16.1, 9.5, and 3 µmol h-1 g-1, respectively. This strategy holds great potential for desalination and plastics value-added transformation toward clean energy and carbon neutrality.

Vertical porous aerogel based on polypyrrole and bimetallic modified β-cyclodextrin polymer-chitosan for efficient solar evaporation

Solar-driven interfacial evaporation (SDIE) stands out as a prospective technology for freshwater production, playing a significant role in mitigating global water scarcity. Herein, a cyclodextrin polymer/chitosan composite aerogel (PPy-La/Al@CDP-CS) with vertically aligned channels was prepared as a solar evaporator for efficient solar steam generation. The vertically aligned pore structure, achieved through directional freezing assisted by liquid nitrogen, not only improves water transport during evaporation but also enhances light absorption through multiple reflections of sunlight within the pores. The polypyrrole particles sprayed on the surface of the aerogel acted as a light-absorbing layer, resulting in an impressive absorbance of 98.15 % under wetting conditions. The aerogel has an evaporation rate of 1.85 kg m-2 h-1 under 1 kW m-2 irradiation. Notably, the vertical pore structure of the aerogel allows it to exhibit excellent evaporation performance and salt resistance even in highly concentrated salt solutions. Furthermore, this aerogel is an excellent solar-driven interfacial evaporator for purifying seawater and fluoride-containing wastewater. This photothermal aerogel has the advantages of excellent performance, low cost, and environmental friendliness, and thus this work provides a new approach to the design and fabrication of solar photothermal materials for water treatment.

SCG-Based CNF Aerogels with Oriented and Aligned Porous Structure for Solar Interfacial Desalination

Spent coffee grounds are recognized as a green and sustainable resource of cellulose nanofiber (CNF), which can further form aerogels with rGO for solar-driven interfacial desalination via directional freezing technology. The vertically arranged channels provide better photothermal conversion performance and salt tolerance of rGO/CNF aerogels. Their max evaporation rate can reach to 2.729 kg·m-2·h-1 under natural sunlight. In terms of long-term application (10 days), the aerogels exhibit a stable evaporation property in outdoor environments. The optimum daily average water yield is 15.00 L·m-2, which can fulfill the daily water requirement of six people.

Fibrous Aerogels with Tunable Superwettability for High-Performance Solar-Driven Interfacial Evaporation

Solar-driven interfacial evaporation is an emerging technology for water desalination. Generally, double-layered structure with separate surface wettability properties is usually employed for evaporator construction. However, creating materials with tunable properties is a great challenge because the wettability of existing materials is usually monotonous. Herein, we report vinyltrimethoxysilane as a single molecular unit to hybrid with bacterial cellulose (BC) fibrous network, which can be built into robust aerogel with entirely distinct wettability through controlling assembly pathways. Siloxane groups or carbon atoms are exposed on the surface of BC nanofibers, resulting in either superhydrophilic or superhydrophobic aerogels. With this special property, single component-modified aerogels could be integrated into a double-layered evaporator for water desalination. Under 1 sun, our evaporator achieves high water evaporation rates of 1.91 and 4.20 kg m-2 h-1 under laboratory and outdoor solar conditions, respectively. Moreover, this aerogel evaporator shows unprecedented lightweight, structural robustness, long-term stability under extreme conditions, and excellent salt-resistance, highlighting the advantages in synthesis of aerogel materials from the single molecular unit.

A bioinspired solar evaporator with a horizontal channel-like framework for efficient and stable high-salinity brine desalination

In recent years, solar steam generation has been one of the most promising and sustainable techniques for water desalination. However, the heat loss to bulk water dramatically decreases the evaporation rate. Besides, salt deposition on the evaporation surface during brine treatment limits the long-term operation of evaporators. Herein, solar evaporators with a horizontal channel-like framework are reported and high efficiency and outstanding salt resistance are achieved. Firstly, eggplants with a hollow fiber alignment structure were carbonized as CEP evaporators. The CEP-H evaporator with a horizontal fiber growth direction shows a high evaporation efficiency of 90.6% and excellent salt resistance when treating high-salinity brine (20 wt%). The low thermal conductivity perpendicular to the fiber growth direction impedes the conductive heat transfer into bulk water, and fast water transport along the fiber growth direction is beneficial for salt resistance. In addition, a proof-of-concept evaporator polypyrrole-coated polypropylene hollow fiber membrane with a horizontal channel-like framework (PPy/PP-H) has also been developed. This hollow fiber membrane shows a high evaporation rate of 1.64 kg m^-2 h^-1 due to multiangle evaporation and also demonstrates excellent salt-resisting performance for high-salinity brine treatment (20 wt%). The study demonstrates the effect of the horizontal channel-like framework for high evaporation performance and salt resistance, providing new insights into the solar evaporator design for seawater desalination and wastewater treatment.

Liquid Transport and Real-Time Dye Purification via Lotus Petiole-Inspired Long-Range-Ordered Anisotropic Cellulose Nanofibril Aerogels

Nowadays, large-scale oriented functional porous materials have been sought after by researchers. However, regulation of the long-range uniform and oriented structures of the material remains a challenge. Herein, ultralong anisotropic cellulose nanofibril (CNF) aerogels with uniformly ordered structures of pore walls inspired by lotus petioles were constructed by applying external speeds to counterbalance the growth driving forces of ice crystals. Based on the growth law of ice crystals, the ice crystals grew at a stable rate when the applied external speed was 0.04 mm/s, ensuring the consistent orientation of the large-scale CNF aerogel. The aerogel exhibited a rapid long-range directional transport ability to different liquid solvents, delivering ethanol up to 40 mm from bottom to top within 50 s. Moreover, by introducing rectorites with good cation-exchange properties, the resulting long-range composite possessed an enhanced adsorption capacity for methylene blue. Furthermore, aerogel successfully achieved real-time dye purification at a long distance, such as fast dye adsorption or selective adsorption. This flexible and straightforward strategy of fabricating ultralong oriented CNF aerogel materials is expected to promote the development of functional aerogels in directional liquid transport and sewage treatment.

Modified Hollow Glass Microspheres/Reduced Graphene Oxide Composite Aerogels with Low Thermal Conductivity for Highly Efficient Solar Steam Generation

Solar steam generation (SSG) as a pollution-free and sustainable way for desalination or wastewater treatment has attracted great attention in recent years. Herein, we report the fabrication of novel aerogels GAHAS and GAHAF composed of 3-aminopropyltriethoxysilane (KH550)-modified hollow glass microspheres (HGM) and reduced graphene oxide (RGO) by a sol-gel method for highly efficient SSG. The RGO can well wrap on modified HGM and form an interpenetrated porous structure with an excellent mechanical property. In addition, benefiting from the hollow structure of HGM, GAHAS obtained by supercritical CO₂ drying well maintains the original structure of the hydrogel and shows low thermal conductivity (0.0823 W m^-1 K^-1) in the wet state and self-floating ability. Combined with its superhydrophilic wettability and high light absorption (ca. 93%), the as-prepared GAHAS shows an outstanding photothermal conversion efficiency of 89.13% under 1 sun (1 kW m^-2) illumination and excellent stability. Moreover, from the simulated seawater outdoor solar desalination experiment, it was found that the concentrations of the four primary ions K⁺, Ca²⁺, Na⁺, and Mg²⁺ in purified water are 1.65, 0.09, 1.42, and 0.32 mg L^-1, respectively, and fully meet drinking water standards. Thus, our GAHAS aerogel shows great potential for practical application in SSG. This work enriches the photothermal materials and may provide a new idea for design and creation of HGM-based photothermal materials with low thermal conductivity, tunable porosity, high mechanical strength, self-floating ability, and high solar energy conversion efficiency for SSG.

Facile Preparation of a Carbon-Based Hybrid Film for Efficient Solar-Driven Interfacial Water Evaporation

Solar-driven interfacial water evaporation is one promising technology for seawater desalination and sewage purification because it offers a feasible and sustainable strategy to relieve global water scarcity. Herein, a novel hybrid film composed of recycled carbon soot and poly(vinyl alcohol) is developed by a very simple, green, and highly scalable "salt-assisted" assembling method. The hybrid film possesses characteristics with a porous structure, superhydrophilicity, ∼100% light absorption, and low thermal conductivity, which can effectively convert light into heat under solar illumination. Consequently, the hybrid film can achieve a photothermal conversion efficiency of 91.5% under a stimulated solar irradiation of 1 kW m^-2. Furthermore, the hybrid film can be applied for seawater desalination and dye wastewater purification. The findings of our work not only provide a new photothermal platform with high light-to-thermal conversion ability and good reusability but also open a new avenue for the applications of carbon soot-based hybrid films in solar-assisted water evaporation and sewage purification.