Core-Shell Nanohydrogels with Programmable Swelling for Conformance Control in Porous Media

Halofuginone-guided nano-local therapy: Nano-thermosensitive hydrogels for postoperative metastatic canine mammary carcinoma with scar removal

In female dogs, the highest morbidity and mortality rates cancer are the result of mammary adenocarcinoma, which presents with metastases in the lung. Other than early surgical removal, however, no special methods are available to treat mammary adenocarcinoma. Because human breast cancer and canine mammary carcinoma share clinical characteristics and heterogeneity, the canine model is a suitable spontaneous tumor model for breast cancer in humans. In this study, the physical swelling method was used to prepare halofuginone-loaded D-α-tocopherol polyethylene glycol 1000 succinate (TPGS) polymer micelles nano-thermosensitive hydrogels (HTPM-gel). Furthermore, HTPM-gel was investigated via characterization, morphology, properties such as swelling experiment and in vitro release with reflecting its splendid nature. Moreover, HTPM-gel was further examined its capability to anti-proliferation, anti-migration, and anti-invasion. Ultimately, HTPM-gel was investigated for its in vivo anticancer activity in the post-operative metastatic and angiogenic canine mammary carcinoma. HTPM-gel presented spherical under transmission electron microscope (TEM) and represented grid structure under scanning electron microscope (SEM), with hydrodynamic diameter (HD) of 20.25 ± 2.5 nm and zeta potential (ZP) of 15.10 ± 1.82 mV. Additionally, HTPM-gel own excellent properties comprised of pH-dependent swelling behavior, sustained release behavior. To impede the migration, invasion, and proliferation of CMT-U27 cells, we tested the efficacy of HTPM-gel. Evaluation of in vivo anti-tumor efficacy demonstrates HTPM-gel exhibit a splendid anti-metastasis and anti-angiogenic ability, with exhibiting ideal biocompatibility. Notably, HTPM-gel also inhibited the scar formation in the healing process after surgery. In summary, HTPM-gel exhibited anti-metastasis and anti-angiogenic and scar repair features. According to the results of this study, HTPM-gel has encouraging clinical potential to treat tumors with multifunctional hydrogel.

Emergence of preferential flow paths and intermittent dynamics in emulsion transport in porous media

We investigate the dynamics of emulsions within a two-dimensional porous medium using an integrated experimental approach that combines pore-level dynamics of single emulsions and bulk transport properties of the medium. Using an on-chip microfluidic drop-maker, we precisely control the concentration and sizes of emulsions injected into the medium. The dynamics of emulsion droplets are highly intermittent despite a small average velocity over the trajectory of an individual emulsion. At low concentrations, emulsions predominantly flow through pores with higher local velocities including pores smaller than the size of emulsion droplets, leading to trapping of emulsions and a decrease in medium porosity. Preferential pathways for the emulsions emerge within the medium once the porosity of the medium decreases significantly, from 55% to 36%. At constant injection flow rates and low concentrations of monodisperse emulsions, these pathways remain the only paths of transport of emulsions within the medium. Introducing a slight polydispersity in emulsion sizes unveiled additional transport pathways. Our pore-level measurements reveal that the average velocity of emulsions scales with the inverse residence time of an emulsion, and this scaling separates the emulsions into distinct groups along the emergent preferential pathways.

High-Performance Nanogel-in-Oils as Emulsion Evolution Controller for Displacement Enhancement in Porous Media

We designed and synthesized high-performance nanogel-in-oils with intermediate properties between solid particles and liquid droplets for multiphase flow control in porous media. The ultrasmall polymeric nanogels prepared via inverse emulsion polymerization were efficiently encapsulated in micrometer-sized oil droplets with the aid of surfactants during transfer from the oil phase to the aqueous phase. The composite colloidal system exhibited high loading capacity, unimodal size distribution, and long-term kinetic stability in suspension. The colloidal behaviors of nanogel-in-oils and the corresponding interfacial evolution during displacement in porous media were investigated via microfluidic experiments. In situ emulsification was observed with a state contrary to that of static characterizations. The spontaneous and sustainable formation of foam-like water-in-oil macroemulsions originated from aqueous phase breakup and oil film development, both enhanced by nanogel-in-oils. Sweeping efficiency enhancement by invasion events and residual oil transport in macroemulsion phases yielded exceptional displacement performances. Flow field fluctuations and emulsion state variations can be manipulated by adjusting nanogel-in-oil concentrations. The nanogel-in-oil suspension was found to exhibit optimal performance among the tested dispersed systems.

Highly Robust Nanogels from Thermal-Responsive Nanoparticles with Controlled Swelling for Engineering Deployments

Regular nanogels have been demonstrated their inefficiency for subterranean oil recovery due to their intrinsic drawbacks of fast swelling within minutes, thermal instability, and salinity vulnerability. Prior deployment of swelling delayed nanogels mainly depended on the reservoirs at a relatively higher temperature. To address the issues encountered during engineering deployment, hereinwe devised an integrative approach to in situ form swelling delayed robust nanogels by introducing radically active monomers with thermally sensitive moieties. The nanoparticles with hydrophobic cores in brine in response to thermal input in situ generated well-dispersed hydrophilic nanogels, which showed a pronounced delayed swelling of a week compared to traditional nanogels showing swelling kinetics within minutes. Furthermore, the formation of swelling-delayed nanogels could occur at ambient temperature. This behavior was radically different from that of temperature-controlled labile cross-linkers containing nanogels, requiring temperatures greater than 50 °C for volume increase thanks to ester hydrolysis. In addition, the in-situ formed nanogels displayed long-term thermal stability and salinity tolerance under hostile media at temperatures up to 130 °C. The release of an acidic proton under aqueous conditions has been demonstrated to control the microenvironment for various scenarios. The nanotechnology of converting hydrophobic nanoparticles to hydrophilic nanogels could be applied in a wide range of practical applications such as plugging materials and foaming stabilizers for in-depth conformance control during water and CO₂ flooding.

Lysine Crosslinked Polyacrylamide─A Novel Green Polymer Gel for Preferential Flow Control

Acrylamide-based polymer gels have been applied to control the preferential flow in the subsurface for decades. However, some commonly used crosslinkers, such as Cr (III) and phenol-formaldehyde, are highly toxic and are being phased out because of stringent environmental regulations. This work uses l-lysine as the green crosslinker to produce acrylamide-based polymer gels. This article systematically studied the effect of lysine and polymer concentration, salinity, pH, and temperature on gelation behavior and thermal stability. Besides, the gelation mechanism and crosslinking density were elucidated in this work. A high-permeability sandstone core was used to test the plugging efficiency of this novel green gel system. This polyacrylamide/lysine system has a controllable gelation time. It can form gels at temperatures higher than 80 °C, with the gelation time from hours to days, and the elastic modulus of the gel can reach over 400 Pa. In addition, the crosslinked gels have been stable at 80 to 130 °C for over 200 days. This novel gel system could decrease rock permeability by over 1000 times. Besides, the F_rrw is two times higher than the F_rro, confirming that the current gel system can reduce the permeability to water more than that to oil. As a green gel system, this novel polymer gel system could replace the current toxic gel systems for the preferential fluid control for water management projects in oil and gas reservoirs, enhanced geothermal systems, and carbon capture and sequestration projects.

Nanohydrogels: Advanced Polymeric Nanomaterials in the Era of Nanotechnology for Robust Functionalization and Cumulative Applications

In the era of nanotechnology, the synthesis of nanomaterials for advanced applications has grown enormously. Effective therapeutics and functionalization of effective drugs using nano-vehicles are considered highly productive and selectively necessary. Polymeric nanomaterials have shown their impact and influential role in this process. Polymeric nanomaterials in molecular science are well facilitated due to their low cytotoxic behavior, robust functionalization, and practical approach towards in vitro and in vivo therapeutics. This review highlights a brief discussion on recent techniques used in nanohydrogel designs, biomedical applications, and the applied role of nanohydrogels in the construction of advanced therapeutics. We reviewed recent studies on nanohydrogels for their wide applications in building strategies for advantageously controlled biological applications. The classification of polymers is based on their sources of origin. Nanohydrogel studies are based on their polymeric types and their endorsed utilization for reported applications. Nanotechnology has developed significantly in the past decades. The novel and active role of nano biomaterials with amplified aspects are consistently being studied to minimize the deleterious practices and side effects. Here, we put forth challenges and discuss the outlook regarding the role of nanohydrogels, with future perspectives on delivering constructive strategies and overcoming the critical objectives in nanotherapeutic systems.

Direct Pore-Level Visualization and Verification of In Situ Oil-in-Water Pickering Emulsification during Polymeric Nanogel Flooding for EOR in a Transparent Three-Dimensional Micromodel

Different from inorganic nanoparticles, nanosized cross-linked polymeric nanoparticles (nanogels) have been demonstrated to generate more stable Pickering emulsions under harsh conditions for a long term owing to their inherent high hydrophilicity and surface energy. In both core and pore scales, the emulsions are found to be able to form in situ during the nanofluid flooding process for an enhanced oil recovery (EOR) process. Due to the limitation of direct visualization in core scale or deficient pore geometries built by two-dimensional micromodels, the in situ emulsification by nanofluids and emulsion transport are still not being well understood. In this work, we use a three-dimensional transparent porous medium to directly visualize the in situ emulsification during the nanogel flooding process for EOR after water flooding. By synthesizing the nanogel with a fluorescent dye, we find the nanogels adsorbed on the oil-water interface to lower the total interfacial energy and emulsify the large oil droplets into small Pickering oil-in-water emulsions. A potential mechanism for in situ emulsification by nanogels is proposed and discussed. After nanogel flooding, the emulsions trapped in pore throats and those in the effluents are all found encapsulated by the nanogels. After nanogel flooding under different flow rates, the sphericity and diameter changes of remaining oil droplets are quantitatively compared and analyzed using grouped boxplots. It is concluded that in situ emulsification happens during nanogel injection due to the reduction of interfacial tension, which helps to increase the oil recovery rate under different flow rates and pore geometries.

Self-growing Hydrogel Particles with Applications for Reservoir Control: Growth Behaviors and Influencing Factors

Chemical profile control agents are the key for conducting effective reservoir control to enhance crude oil recovery. Self-growing hydrogel particles have emerged as highly competitive profile control agents as they can grow for control after migrating to deep fractures, exhibiting great potential in long-term adaptive reservoir control. In this work, self-growing hydrogel particles were prepared by mechanical shearing of self-repairing bulk gels constructed by catechol-functionalized partially hydrolyzed polyacrylamide p[AM-AANa-DOPA] and phenolic resin cross-linking agents. After aging for 15 days under the reservoir conditions, the median size of hydrogel particles increased from ∼3.5 to ∼18.0 μm, demonstrating apparent self-growing property and significantly enhanced resistant coefficient in waterflooding. Different factors affecting growth behaviors of hydrogel particles including cross-linking density, chemical re-cross-linking, hydrolysis degree, and molecular weight of the copolymer were studied. The results showed that the cross-linking density affected the strength and toughness of the bulk hydrogel, with appropriate polymer chain mobility facilitating the intermolecular interactions. Quantitative NMR results of the gelation process indicated that chemical re-cross-linking contributed little to the growth of hydrogel particles. Based on the rheological and nanomechanical results, bulk gels prepared by polymers with a lower hydrolysis degree and smaller molecular weight possessed a higher elastic modulus recovery rate, while the corresponding hydrogel particles exhibited stronger adhesion among each other. This work provides new insights into the growth behavior of hydrogel particles, which may help better understand and select a suitable hydrogel system and preparation technology and further promote efficient reservoir control.