Superadsorbents for Strontium and Cesium Removal Enriched in Amidoxime by a Homo-IPN Strategy Connected with Porous Silica Texture

Enhanced sorption of strontium radionuclides onto a modified molybdenum titanate composite

A study was conducted to investigate the sorption of 85Sr from aqueous solutions using a fabricated magnesium molybdenum titanate (MgMoTi) composite. The MgMoTi composites were synthesized through the co-precipitation technique and characterized using different analytical tools, including FT-IR, XRD, SEM, and EDX. The sorption studies focused on 85Sr and examined factors such as shaking time, pH, ionic strength, temperature, initial ion concentration, and saturation capacity. The results obtained from the study indicated that, under optimum sorption conditions, the saturation capacity for 85Sr onto S-4 and S-5 was determined to be 23.31 and 37.72 mg g-1, respectively. The sorption of 85Sr exhibited dependence on pH and ionic strength. The kinetics of the sorption process followed the pseudo-2nd-order model, while the thermodynamics revealed an endothermic and spontaneous nature. Desorption studies revealed that 0.1 M HCl was the most effective eluent for the complete recovery of 85Sr. Furthermore, the recycling results demonstrated the excellent recyclability of MgMoTi, suggesting its potential application as a sorbent for the removal of 85Sr from aqueous solutions. Overall, the study highlights MgMoTi as a promising composite with practical utility in the sorption of 85Sr from aqueous solutions.

Hybrid method integrating adsorption and chemical precipitation of heavy metal ions on polymeric fiber surfaces for highly efficient water purification

A lot of research has been focused on increasing the specific surface area of adsorbents over a long period of time to remove heavy metal ions from wastewater using the adsorbent. However, porous adsorbents with high specific surface area have demonstrated drawbacks in water purification processes, such as high pressure drop and limitations in the adsorption capacity of heavy metal ions. In recent years, a mechanism-based convergence method involving adsorption/chemical precipitation has emerged as a promising strategy to surmount the constraints associated with porous adsorbents. The mechanism involves amine groups on chelating fibers dissociating OH- ions from water molecules, thereby raising the pH near the fibers. This elevated pH promotes the crystallization of heavy metal ions on the fiber surfaces. The removal of heavy metal ions proceeds through a sequence of adsorption and chemical precipitation processes. An adsorbent based on chelating fibers, integrating adsorption technology with chemical precipitation, demonstrates superior performance in removing significant quantities of heavy metal ions (ca. 1000-2000 mg/g for Cd2+, Cu2+ and Pb2+) when compared to developed porous adsorbents (ca. 50-760 mg/g for same ions). This review paper introduces advanced polymer fibers endowed with the capability to integrate hybrid technology, delves into the mechanism of hybrid technology, and examines its application in process technology for the effective removal of heavy metal ions. The versatility of these advanced fibers extends far beyond the removal of heavy metal ions in water treatment, making them poised to garner significant attention from researchers across diverse fields due to their broad range of potential applications. After further processes involving the removal of templates from chelating polymeric fibers used as supports and the reduction of precipitated heavy metal oxide crystals, the resulting heavy metal crystals can exhibit thin walls and well-interconnected porous structures, suitable for catalytic applications.

Recent trends in the phytoremediation of radionuclide contamination of soil by cesium and strontium: Sources, mechanisms and methods: A comprehensive review

This comprehensive review examines recent trends in phytoremediation strategies to address soil radionuclide contamination by cesium (Cs) and strontium (Sr). Radionuclide contamination, resulting from natural processes and nuclear-related activities such as accidents and the operation of nuclear facilities, poses significant risks to the environment and human health. Cs and Sr, prominent radionuclides involved in nuclear accidents, exhibit chemical properties that contribute to their toxicity, including easy uptake, high solubility, and long half-lives. Phytoremediation is emerging as a promising and environmentally friendly approach to mitigate radionuclide contamination by exploiting the ability of plants to extract toxic elements from soil and water. This review focuses specifically on the removal of 90Sr and 137Cs, addressing their health risks and environmental implications. Understanding the mechanisms governing plant uptake of radionuclides is critical and is influenced by factors such as plant species, soil texture, and physicochemical properties. Phytoremediation not only addresses immediate contamination challenges but also provides long-term benefits for ecosystem restoration and sustainable development. By improving soil health, biodiversity, and ecosystem resilience, phytoremediation is in line with global sustainability goals and environmental protection initiatives. This review aims to provide insights into effective strategies for mitigating environmental hazards associated with radionuclide contamination and to highlight the importance of phytoremediation in environmental remediation efforts.

MOFs-alginate/polyacrylic acid/poly (ethylene imine) heparin-mimicking beads as a novel hemoadsorbent for bilirubin removal in vitro and vivo models

Metal-organic frameworks (MOFs) have a potential application in blood purification, but their microcrystalline nature has hampered their industrial application. Here, novel MOFs-polymer beads based on UiO, sodium alginate, polyacrylic acid, and poly (ethylene imine) were prepared and applied as a whole blood hemoadsorbent for the first time. The amidation among polymers immobilized UiO66-NH₂ into the network of the optimal product (SAP-3), and the NH₂ of UiO66-NH₂ significantly increased the removal rate (70 % within 5 min) of SAP-3 on bilirubin. The adsorption of SAP-3 on bilirubin mainly obeyed the pseudo-second-order kinetic, Langmuir isotherm and Thomas models with a maximum adsorption capacity (q_m) of 63.97 mg·g^-1. Experimental and density functional theory simulation results show that bilirubin was mainly adsorbed by UiO66-NH₂via electrostatic force, hydrogen bonding, and π-π interactions. Notably, the adsorption in vivo show that the total bilirubin removal rate in the whole blood of the rabbit model was up to 42 % after 1 h of adsorption. Given its excellent stability, cytotoxicity, and hemocompatibility, SAP-3 has a great potential in hemoperfusion therapy. This study proposes an effective strategy for settling the powder property of MOFs and could provide experimental and theoretical references for application of MOFs in blood purification.

New Process for the Sulfonation of Algal/PEI Biosorbent for Enhancing Sr(II) Removal from Aqueous Solutions-Application to Seawater

Sulfonic resins are highly efficient cation exchangers widely used for metal removal from aqueous solutions. Herein, a new sulfonation process is designed for the sulfonation of algal/PEI composite (A*PEI, by reaction with 2-propylene-1-sulfonic acid and hydroxylamine-O-sulfonic acid). The new sulfonated functionalized sorbent (SA*PEI) is successfully tested in batch systems for strontium recovery first in synthetic solutions before investigating with multi-component solutions and final validation with seawater samples. The chemical modification of A*PEI triples the sorption capacity for Sr(II) at pH 4 with a removal rate of up to 7% and 58% for A*PEI and SA*PEI, respectively (with SD: 0.67 g L^-1). FTIR shows the strong contribution of sulfonate groups for the functionalized sorbent (in addition to amine and carboxylic groups from the support). The sorption is endothermic (increase in sorption with temperature). The sulfonation improves thermal stability and slightly enhances textural properties. This may explain the fast kinetics (which are controlled by the pseudo-first-order rate equation). The sulfonated sorbent shows a remarkable preference for Sr(II) over competitor mono-, di-, and tri-valent metal cations. Sorption properties are weakly influenced by the excess of NaCl; this can explain the outstanding sorption properties in the treatment of seawater samples. In addition, the sulfonated sorbent shows excellent stability at recycling (for at least 5 cycles), with a loss in capacity of around 2.2%. These preliminary results show the remarkable efficiency of the sorbent for Sr(II) removal from complex solutions (this could open perspectives for the treatment of contaminated seawater samples).

Optimization of Arsenic Removal from Aqueous Solutions Using Amidoxime Resin Hosted by Mesoporous Silica

The paper reports on the performances of cross-linked amidoxime hosted into mesoporous silica (AMOX) in the removal of As(III) and As(V). The optimum pH for sorption of As(III) and As(V) was pH 8 and pH 5, respectively. The PFO kinetic model and the Sips isotherm fitted the best the experimental data. The thermodynamic parameters were evaluated using the equilibrium constant values given by the Sips isotherm at different temperatures and found that the adsorption process of As(III) and As(V) was spontaneous and endothermic on all AMOX sorbents. The spent AMOX sorbents could be easily regenerated with 0.2 mol/L HCl solution and reused up to five sorption/desorption cycles with an average decrease of the adsorption capacity of 18%. The adverse effect of the co-existing inorganic anions on the adsorption of As(III) and As(V) onto the sorbent with the highest sorption capacity (AMOX3) was arranged in the following order: H₂PO₄ ^- > HCO₃ ^- > NO₃ ^- > SO₄ ^2-.

Highly selective cesium removal under acidic and alkaline conditions using a novel potassium aluminum thiostannate

The pH values of nuclear wastewater are extremely low or high, which make the efficient removal of ¹³⁷Cs a major concern among the issues for safety management and environmental remediation. Existing metal sulfides for Cs⁺ adsorption have shown poor performance at acidic and alkaline conditions, and the reason has not been revealed yet. Herein, a novel potassium aluminum thiostannate (KAlSnS-3) adsorbent was designed and its Cs⁺ adsorption mechanism over a wide pH range was investigated. We hypothesized that Al³⁺ dopant on Sn⁴⁺ sites would allow stable adsorption for Cs⁺ upon its partial release at acidic and alkaline conditions. As a result, KAlSnS-3 demonstrated excellent adsorption performance across a broad pH range (1-13), and high selectivity toward Cs⁺, even under high salinity conditions (in tap water K_d = 3.12 × 10⁴ mL/g; and in artificial seawater K_d = 3.42 × 10³ mL/g). KAlSnS-3 also exhibited rapid adsorption kinetics (R = 97.6% in the first minute), a remarkable adsorption capacity (259.31 mg/g), and a high distribution coefficient (2.09 × 10⁵ mL/g) toward Cs⁺. In addition, the high reusability of KAlSnS-3 was observed, suggesting its potential for real-world applications. The mechanism for enhancing performance at low and high pH values was discussed with the evidence of crystallinity, elemental concentrations, and binding energy of electrons based on the concept of electrostatic interactions and chemical affinity. In summary, this work provides insights into the mechanism of Cs⁺ removal under a wide pH range, and the impressive Cs⁺ adsorption performance indicates the application potential of KAlSnS-3 in wastewater treatment.

Unravelling the origin of long-term stability for Cs+ and Sr2+ solidification inside sodalite

Cesium (Cs⁺) and strontium (Sr²⁺) ions are the main fission byproducts in the reprocessing of spent nuclear fuels for nuclear power plants. Their long half-live period (30.17 years for ¹³⁷Cs and 28.80 years for ⁹⁰Sr) makes them very dangerous radionuclides. Hence the solidification of Cs⁺ and Sr²⁺ is of paramount importance for preventing them from entering the human food chain through water. Despite tremendous efforts for solidification, the long-term stability remains a great challenge due to the experimental limitation and lack of good evaluation indicators for such long half-life radionuclides. Using density functional theory (DFT), we investigate the origin of long-term stability for the solidification of Cs⁺ and Sr²⁺ inside sodalite and establish that the exchange energy and the diffusion barrier play an important role in gaining the long-term stability both thermodynamically and kinetically. The acidity/basicity, solvation, temperature, and diffusion effect are comprehensively studied. It is found that solidification of Cs⁺ and Sr²⁺ is mainly attributed to the solvation effect, zeolitic adsorption ability, and diffusion barriers. The present study provides theoretical evidence to use geopolymers to adsorb Cs⁺ and Sr²⁺ and convert the adsorbed geopolymers to zeolites to achieve solidification of Cs⁺ and Sr²⁺ with long-term stability.

New Polymeric Adsorbents Functionalized with Aminobenzoic Groups for the Removal of Residual Antibiotics

In this paper, we present the synthesis of new polymeric adsorbents derived from macroporous chloromethylated styrene–divinylbenzene (DVB) copolymers with different cross-linking degrees functionalized with the following aminobenzoic groups: styrene—6.7% DVB (PAB1), styrene—10% DVB (PAB2), and styrene—15% DVB (PAB3). The new polymeric products, PAB1, PAB2, and PAB3, were characterized by FTIR spectroscopy, thermogravimetric analysis, and EDX, SEM, and BET analysis, respectively. The evolution of the functionalization reaction was followed by FTIR spectroscopy, which revealed a decrease in the intensity of the γCH₂Cl band at 1260 cm⁻¹, and, simultaneously, the appearance of C=O carboxylic bands from 1685–1695 cm⁻¹ and at 1748 cm⁻¹. The thermal stability increased with the increase in the cross-linking degree. The data obtained from the EDX analysis of the novel cross-linked copolymers confirmed the functionalization with aminobenzoic groups through the presence and content of nitrogen, as follows: PAB1: N% = 0.47; PAB2: N% = 0.85; and PAB3: N% = 1.30. The adsorption performances of the novel polymeric adsorbents, PAB1, PAB2, and PAB3, were tested in the adsorption of three antibiotics, tetracycline, sulfamethoxazole, and amoxicillin, from aqueous solutions, by using extensive kinetic, equilibrium, and thermodynamic studies. The best adsorption capacity was demonstrated by the tetracycline. Amoxicillin adsorption was also attempted, but it did not show positive results.

Improved solid phase extraction for selective and efficient quantification of sunset yellow in different food samples using a novel molecularly imprinted polymer reinforced by Fe3O4@UiO-66-NH2

The overuse of synthetic dyes in food products has gradually increased in recent years, resulting food safety and human health has become a global issue. An innovative design of a magnetic molecularly imprinted polymer (Fe3O4@UiO-66-NH2@MIP) for efficient, fast, and selective determination of sunset yellow (SY) from different food products was described in this study. The absorption properties of Fe3O4@UiO-66-NH2@MIP were elucidated by adsorption kinetics, isotherms, reusability, and selectivity experiments. Because of the incorporation of porous Fe3O4@UiO-66-NH2nanocomposite into molecularly imprinted polymer an efficient nanosorbent with a short equilibrium time, a high adsorption capacity, and a good imprinting factor was finally obtained. The porous Fe3O4@UiO-66-NH2@MIP are also used for quantification of the SY. Under optimal conditions, good linearity (R2 0.9964) in the range of 1.0-120 mg L-1 and a low limit of detection (0.41 mg L-1) was observed with satisfactory recoveries (92.50-106.1%) and excellent reusability (RSD ≤ 6.6% after 12 cycles).