1
|
Li ZF, Li YT, Zhang Q, Hu TL. 2-Methylimidazole-modulated 2D Cu metal-organic framework for 5-hydroxymethylfurfural hydrodeoxygenation. Dalton Trans 2024; 53:1698-1705. [PMID: 38169009 DOI: 10.1039/d3dt03870j] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/05/2024]
Abstract
Preparation of the high value-added chemical 2,5-dimethylfuran (2,5-DMF) from the biomass-derived platform molecule 5-hydroxymethylfurfural (HMF) is of great significance in the preparation of biofuels. Here, a bottom-up strategy was used to prepare a metal-organic framework (MOF) material with a two-dimensional nanosheet morphology, named CPM, in which an additive 2-methylimidazole was introduced into the hydrothermal process of Cu2+ ions and terephthalic acid. Subsequently, CPM-700 prepared by heat treatment under an inert atmosphere showed excellent catalytic performance in the reaction of HMF hydrodeoxygenation to 2,5-DMF. The materials before and after pyrogenation were characterized by PXRD, XPS, TEM, N2 adsorption and desorption and so on. It was confirmed that compared with the catalyst derived from the cubic MOF material self-assembled by Cu2+ and terephthalic acid, the morphology of 2D nanosheets was beneficial for the reaction of HMF to 2,5-DMF. Combined with the experimental data, the possible reaction path of 2,5-DMF preparation from HMF is that 2,5-dihydroxymethylfuran was formed by hydrogenation of the aldehyde group on the furan ring, and then 2,5-DMF was obtained by hydrogenolysis. This paper provides an effective route for 2D MOF-derived catalytic materials in the selective hydrogenation of HMF.
Collapse
Affiliation(s)
- Zhuo-Fei Li
- School of Materials Science and Engineering, National Institute for Advanced Materials, Nankai University, Tianjin 300350, China.
- Jiangsu Key Laboratory of Advanced Catalytic Materials and Technology, School of Petrochemical Engineering, Changzhou University, Changzhou 213164, China
- Key Laboratory of Advanced Energy Materials Chemistry (Ministry of Education), Nankai University, Tianjin 300071, China
| | - Yan-Ting Li
- School of Materials Science and Engineering, National Institute for Advanced Materials, Nankai University, Tianjin 300350, China.
| | - Qiang Zhang
- School of Materials Science and Engineering, National Institute for Advanced Materials, Nankai University, Tianjin 300350, China.
| | - Tong-Liang Hu
- School of Materials Science and Engineering, National Institute for Advanced Materials, Nankai University, Tianjin 300350, China.
- Key Laboratory of Advanced Energy Materials Chemistry (Ministry of Education), Nankai University, Tianjin 300071, China
| |
Collapse
|
2
|
Wang Y, Wang H, Kong X, Zhu Y. Catalytic Conversion of 5-Hydroxymethylfurfural to High-Value Derivatives by Selective Activation of C-O, C=O, and C=C Bonds. CHEMSUSCHEM 2022; 15:e202200421. [PMID: 35385225 DOI: 10.1002/cssc.202200421] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/26/2022] [Revised: 04/03/2022] [Indexed: 06/14/2023]
Abstract
With increasing concern for reducing CO2 emission and alleviating fossil resource dependence, catalytic transformation of 5-hydroxymethylfurfural (HMF), a vital platform compound derived from C6 sugars, holds great promise for producing value-added chemicals. Among several well-established catalytic systems, hydrogenation and oxidation processes have been efficiently adopted for upgrading HMF. This Review covers recent advances in the development of thermocatalytic conversion of HMF into value-added chemicals. The advances of metal-catalyzed hydrogenation, hydrogenolysis, ring-opening, decarbonylation, and oxidation involving selective activation of C-O, C=O, and C=C groups are described. The roles played by nature of metals, supports, additives, synergy of metal-acid sites, and metal-support interaction are also discussed at the molecular level. Finally, an outlook is provided to highlight major challenges associated with this huge research area.
Collapse
Affiliation(s)
- Yueqing Wang
- School of Energy and Power engineering, North University of China, Taiyuan, 030051, Shanxi, P. R. China
| | - Hongxing Wang
- State Key Laboratory of Coal Conversion, Institute of Coal Chemistry, Chinese Academy of Sciences, Taiyuan, 030001, P.R. China
- University of Chinese Academy of Sciences, Beijing, 100049, P.R. China
| | - Xiao Kong
- School of Materials and Chemistry, University of Shanghai for Science and Technology, 516 Jungong Road, Shanghai, 200093, P.R. China
| | - Yulei Zhu
- State Key Laboratory of Coal Conversion, Institute of Coal Chemistry, Chinese Academy of Sciences, Taiyuan, 030001, P.R. China
| |
Collapse
|
3
|
Xia J, Gao D, Han F, Lv R, Waterhouse GIN, Li Y. Hydrogenolysis of 5-Hydroxymethylfurfural to 2,5-Dimethylfuran Over a Modified CoAl-Hydrotalcite Catalyst. Front Chem 2022; 10:907649. [PMID: 35651715 PMCID: PMC9149655 DOI: 10.3389/fchem.2022.907649] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/30/2022] [Accepted: 04/13/2022] [Indexed: 11/13/2022] Open
Abstract
The catalytic hydrogenolysis of 5-hydroxymethylfurfural (HMF) to 2,5-dimethylfuran (DMF) is a promising route towards sustainable liquid fuels with a high energy density. Herein, a novel CuCoNiAl-containing mixed metal oxide catalyst (CuCoNiAl-MMO) was prepared by calcination a layered double hydroxide (LDH) precursor in N2 at 500 °C, then applied for the catalytic hydrogenolysis of HMF to DMF. The effects of reaction time, reaction temperature and hydrogen pressure on DMF selectivity were investigated. Under relatively mild reaction conditions (180°C, 1.0 MPa H2, 6.0 h), CuCoNiAl-MMO showed both a high initial activity and selectivity for hydrogenolysis of HMF to DMF, with HMF conversion rate of 99.8% and DMF selectivity of 95.3%. Catalysts characterization studies using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) revealed the presence of various metal oxides and metallic copper on the surface of the CuCoNiAl-MMO catalyst, with the presence of mixed metal-oxide-supported metallic Cu nanoparticles being responsible good hydrogenolysis activity of the catalyst for selective DMF synthesis.
Collapse
Affiliation(s)
- Jing Xia
- College of Chemistry and Material Science, Shandong Agricultural University, Taian, China
| | - De Gao
- College of Chemistry and Material Science, Shandong Agricultural University, Taian, China
| | - Feng Han
- College of Chemistry and Material Science, Shandong Agricultural University, Taian, China
| | - Ruifu Lv
- College of Chemistry and Material Science, Shandong Agricultural University, Taian, China
| | | | - Yan Li
- College of Chemistry and Material Science, Shandong Agricultural University, Taian, China
- *Correspondence: Yan Li,
| |
Collapse
|
4
|
Wang L, Yang Y, Yin P, Ren Z, Liu W, Tian Z, Zhang Y, Xu E, Yin J, Wei M. MoO x-Decorated Co-Based Catalysts toward the Hydrodeoxygenation Reaction of Biomass-Derived Platform Molecules. ACS APPLIED MATERIALS & INTERFACES 2021; 13:31799-31807. [PMID: 34197068 DOI: 10.1021/acsami.1c10599] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Catalytic conversion of a biomass derivative (levulinic acid, LA) to a high value-added product (γ-valerolactone, GVL) has attracted much attention, in which the control of catalytic selectivity plays an important role. Herein, a stepwise method was developed to prepare Co-MoOx catalysts via topological transformation (calcination reduction) from layered double hydroxide (Mo/CoAl-LDH) precursors. X-ray diffraction, high-resolution transmission electron microscopy, and hydrogen temperature-programmed reduction demonstrate the formation of MoOx-decorated Co structures of Co-MoOx samples. Remarkably, the sample that is reduced at 500 °C is featured with the most abundant interfacial Coδ+ (denoted as Co-MoOx-500), which exhibits an excellent catalytic performance toward the hydrodeoxygenation (HDO) reaction of several biomass-derived platform molecules (furfural, FAL; succinic acid, SA; 5-hydroxymethyl-furfural, HMF; and levulinic acid, LA). Especially, this optimal catalyst displays a high yield (99%) toward the HDO reaction of LA to GVL, which stands at the highest level among non-noble metal catalysts. The combination of in situ FT-IR characterization and theoretical calculation further confirms that interfacial Coδ+ sites in Co-MoOx-500 act as adsorption active sites for the polarization of a C═O bond in an LA molecule, which simultaneously promotes C═O hydrogenation and C-O cleavage. Moreover, the MoOx overlayer suppresses the formation of byproducts by covering the Co0 sites. This work offers a cost-effective and efficient catalyst, which can be potentially applied in catalytic conversion of biomass-derived platform molecules.
Collapse
Affiliation(s)
- Lei Wang
- State Key Laboratory of Chemical Resource Engineering, Beijing Advanced Innovation Center for Soft Matter Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, P. R. China
| | - Yusen Yang
- State Key Laboratory of Chemical Resource Engineering, Beijing Advanced Innovation Center for Soft Matter Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, P. R. China
| | - Pan Yin
- State Key Laboratory of Chemical Resource Engineering, Beijing Advanced Innovation Center for Soft Matter Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, P. R. China
| | - Zhen Ren
- State Key Laboratory of Chemical Resource Engineering, Beijing Advanced Innovation Center for Soft Matter Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, P. R. China
| | - Wei Liu
- State Key Laboratory of Chemical Resource Engineering, Beijing Advanced Innovation Center for Soft Matter Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, P. R. China
| | - Zhaowei Tian
- State Key Laboratory of Chemical Resource Engineering, Beijing Advanced Innovation Center for Soft Matter Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, P. R. China
| | - Yuanjing Zhang
- State Key Laboratory of Chemical Resource Engineering, Beijing Advanced Innovation Center for Soft Matter Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, P. R. China
| | - Enze Xu
- State Key Laboratory of Chemical Resource Engineering, Beijing Advanced Innovation Center for Soft Matter Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, P. R. China
| | - Jianjun Yin
- SINOPEC Beijing Research Institute of Chemical Industry, Beijing 100013, P. R. China
| | - Min Wei
- State Key Laboratory of Chemical Resource Engineering, Beijing Advanced Innovation Center for Soft Matter Science and Engineering, Beijing University of Chemical Technology, Beijing 100029, P. R. China
| |
Collapse
|