On the Electro-Active Control of Nanocellulose-Based Functional Biolubricants

A feasibility study on femtosecond laser texturing of sprayed nanocellulose coatings

Nanocelluloses are emerging as natural materials with favourable properties for coating industry and can be applied by state-of-the-art spraying technology. While additional functionalities are commonly introduced through chemical modification, the surface microstructuring of nanocellulose coatings with high throughput methods remains unexplored. Here, a femtosecond laser is used for texturing spray-coated coatings made of cellulose nanofibrils (CNF) or cellulose nanocrystals (CNC). For coating thickness of 1.5 to 8 μm, processing limits were determined with maximum ablation energy linearly increasing with coating thickness and minimum ablation energy decreasing or increasing depending on the apparent coating density. Within applicable processing window of pulse rate and power setting, the operational ranges were determined for creating one-dimensional and two-dimensional surface patterns, requiring a higher laser energy for CNC compared to CNF coatings and yielding thinnest possible resolved patterns of 17 μm as determined by the laser spot diameter. The laser ablation under low energy corresponds to an increase in surface roughness and intensifies surface hydrophilicity, while the line patterns are able to pin water droplets with rising water contact angles up to 90°. Present feasibility study opens future possibilities for managing surface properties of nanocellulose coatings in applications where tuning of surface hydrophilicity is required.

Transformation of Cellulose via Two-Step Carbonization to Conducting Carbonaceous Particles and Their Outstanding Electrorheological Performance

In this study, cellulose was carbonized in two-steps using hydrothermal and thermal carbonization in sequence, leading to a novel carbonaceous material prepared from a renewable source using a sustainable method without any chemicals and, moreover, giving high yields after a treatment at 600 °C in an inert atmosphere. During this treatment, cellulose was transformed to uniform microspheres with increased specific surface area and, more importantly, conductivity increased by about 7 orders of magnitude. The successful transition of cellulose to conducting carbonaceous microspheres was confirmed through SEM, FTIR, X-ray diffraction and Raman spectroscopy. Prepared samples were further used as a dispersed phase in electrorheological fluids, exhibiting outstanding electrorheological effects with yield stress over 100 Pa at an electric field strength 1.5 kV mm⁻¹ and a particle concentration of only 5 wt%, significantly overcoming recent state-of-the-art findings. Impedance spectroscopy analysis showed clear interfacial polarization of this ER fluid with high dielectric relaxation strength and short relaxation time, which corresponded to increased conductivity of the particles when compared to pure cellulose. These novel carbonaceous particles prepared from renewable cellulose have further potential to be utilized in many other applications that demand conducting carbonaceous structures with high specific surface area (adsorption, catalyst, filtration, energy storage).

Chemical grafting fluoropolymer on cellulose nanocrystals and its rheological modification to perfluoropolyether oil

Cellulose nanocrystal (CNC) is the sustainable nanoparticle derived from natural cellulose, widely used as the functional additive to tailor the properties and performances of diverse matters. This study attempted the application of CNC as the rheological modifier in fluorocarbon lubricating oil (perfluoropolyether, PFPE). To solve the incompatibility between cellulose and base oil, fluoropolymer was covalently grafted onto the surface of nanocrystals by living radical polymerization. The introduction of modified cellulose nanocrystals exhibited significant thickening effect to PFPE-based hybrid oils, with the increase on viscosity, improved thixotropy performance and enhanced storage modulus (G') and loss modulus (G″). In particular, when adding 10-15 wt% modified nanocrystals, a transition of G' > G″ from the flowable state to grease-like state appeared in hybrid oils, attributed to the formation of stable subnetwork based on the chain entanglement of the grafted fluoropolymer and PFPE oil.

Electrorheological Fluids of GO/Graphene-Based Nanoplates

Due to their unique anisotropic morphology and properties, graphene-based materials have received extensive attention in the field of smart materials. Recent studies show that graphene-based materials have potential application as a dispersed phase to develop high-performance electrorheological (ER) fluids, a kind of smart suspension whose viscosity and viscoelastic properties can be adjusted by external electric fields. However, pure graphene is not suitable for use as the dispersed phase of ER fluids due to the electric short circuit caused by its high electrical conductivity under electric fields. However, graphene oxide (GO) and graphene-based composites are suitable for use as the dispersed phase of ER fluids and show significantly enhanced property. In this review, we look critically at the latest developments of ER fluids based on GO and graphene-based composites, including their preparation, electrically tunable ER property, and dispersed stability. The mechanism behind enhanced ER property is discussed according to dielectric spectrum analysis. Finally, we also propose the remaining challenges and possible developments for the future outlook in this field.