Mechanisms of Interfacial Charge Transfer and Photocatalytic NO Oxidation on BiOBr/SnO2 p-n Heterojunctions

Construction of Au quantum dots/nitrogen-defect-enriched graphite carbon nitride heterostructure via photo-deposition towards enhanced nitric oxide photooxidation

The challenge of mitigating pollution stemming from industrial exhaust emissions is a pressing issue in both academia and industry. This study presents the successful synthesis of nitrogen-defect-enriched graphite carbon nitride (g-C3N4) using a two-step calcination technique. Furthermore, a g-C3N4-Au heterostructure was fabricated through the photo-deposited Au quantum dots (QDs). When subjected to visible light irradiation, this heterostructure exhibited robust nitric oxide (NO) photooxidation activity and stability. With its fluffy, porous structure and large surface area, the nitrogen-defect-enriched g-C3N4 provides more active sites for photooxidation processes. The ability of g-C3N4 to absorb visible light is enhanced by the local surface plasmon resonance (LSPR) effect of Au QDs. Additionally, the lifetime of photogenerated charge carriers is extended by the presence of N defects and Au, which effectively prevent photogenerated electron-hole pairs from recombining during the photooxidation process. Moreover, the oxidation pathway of NO was analyzed through In-situ Fourier transform infrared (FT-IR) spectroscopy and Density Functional Theory (DFT) calculation. Computational findings revealed that the introduction of Au QDs decreases the activation energy of the oxidation reaction, thereby facilitating its occurrence while diminishing the formation of intermediate products. As a result, NO is predominantly converted to nitrate (NO3-). This work unveils a novel approach to constructing semiconductor-cocatalyst heterostructures and elucidates their role in NO photooxidation.

Construction of a BiOCl/Bi2O2CO3 S-Scheme Heterojunction Photocatalyst via Sharing [Bi2O2]2+ Slabs with Enhanced Photocatalytic H2O2 Production Performance

The construction of a close contact interface is key to enhancing the photocatalytic activity in heterojunctions. In the work, the BiOCl/Bi2O2CO3 of sharing [Bi2O2]2+ slabs S-scheme heterojunction was prepared by a HCl in situ etching method. The optimal composite photocatalyst could accomplish sizable productivity of H2O2 to 2562.95 μmol g-1 h-1 under simulated solar irradiation, higher than that of primitive Bi2O2CO3 and BiOCl. Moreover, the synthesized catalysts showed good stability. The band structures of BiOCl and Bi2O2CO3 were determined, confirming the formation of BiOCl/Bi2O2CO3 S-scheme heterojunction The BiOCl/Bi2O2CO3, which obviously improved the separation efficiency of photoinduced carriers and effectively enhanced the redox ability of the photocatalyst. In addition, density functional theory (DFT) calculations were utilized to analyze the electron transfer properties and the constitution of the built-in electric field at the interface of BiOCl and Bi2O2CO3. The photocatalytic reaction process was further researched by electron paramagnetic resonance (EPR), indicating the active species in the photocatalytic production of hydrogen peroxide. Eventually, a feasible S-scheme electron transfer mechanism on the BiOCl/Bi2O2CO3 heterojunction during the photocatalytic H2O2 production process was proposed and discussed. This work provides a reliable strategy for the fine design of the S-scheme heterojunction.

Epitaxial growth of Bi4Ti3O12-BiPO4 Z-scheme heterojunction to promote carrier transfer for photocatalytic oxidation of NO

The lack of compactness in heterojunction interfaces and poor charge separation is a great challenge in developing high-efficiency heterojunction photocatalysts. Herein, a novel Bi4Ti3O12-BiPO4 heterojunction was successfully prepared for the first time by epitaxial growth of BiPO4 on the surface of Bi4Ti3O12 nanosheets. The optimized Bi4Ti3O12-BiPO4-0.5 increased the NO oxidation efficiency to 73.05%, surpassing pure Bi4Ti3O12 (63.45%) and BiPO4 (8.35%). Experiments and theoretical calculations indicated that the closely contacted heterointerface between BTO and BPO promoted the generation of the built-in electric field, which led to the formation of the Z- scheme transfer pathway for the photogenerated carriers. Therefore, the separation of photogenerated carriers was facilitated while retaining high redox potential, generating more ·O2- and ·OH to participate in NO oxidation. Furthermore, the adsorption of NO and O2 was enhanced by introducing BiPO4, further improving the photocatalytic NO oxidation performance. This work emphasizes the critical role of heterointerface in accelerating charge transfer, providing a basis for the design and construction of tightly contacted heterojunction photocatalysts.

Visible light photocatalytic NOx removal with suppressed poisonous NO2 byproduct generation over simply synthesized triangular silver nanoparticles coupled with tin dioxide

The treatment or conversion of air pollutants with a low generation of secondary toxic substances has become a hot topic in indoor air pollution abatement. Herein, we used triangle-shaped Ag nanoparticles coupled with SnO2 for efficient photocatalytic NO removal. Ag triangular nanoparticles (TNPs) were synthesized by the photoreduction method and SnO2 was coupled by a simple chemical impregnation process. The photocatalytic NO removal activity results show that the modification with Ag TNPs significantly boosted the removal performance up to 3.4 times higher than pristine SnO2. The underlying roles of Ag TNPs in NO removal activity improvement are due to some advantages of Ag TNPs. Moreover, the Ag TNPs contributed photogenerated holes as the main active species toward enhancing the NO oxidation reaction. In particular, the selectivity toward green products significantly improved from 52.78% (SnO2) to 86.99% (Ag TNPs/SnO2). The formation of reactive radicals under light irradiation was also verified by DMPO spin-trapping experiments. This work provides a potential candidate for visible-light photocatalytic NO removal with low toxic byproduct generation.

Micro-Spherical BiOI Photocatalysts for Efficient Degradation of Residual Xanthate and Gaseous Nitric Oxide

BiOI microspheres were synthesized using the solvothermal method for the degradation of residual xanthate and gaseous nitric oxide (NO) under visible light irradiation. The as-prepared BiOI nanomaterials were then characterized using various technologies, including XRD, FE-SEM, TEM, UV-Vis DRS, and XPS. The photodegradation results show that the removal efficiency of isobutyl sodium xanthate can reach 98.08% at an initial xanthate concentration of 120 mg/L; that of NO is as high as 96.36% at an inlet NO concentration of 11 ppm. Moreover, the effects of operational parameters such as catalyst dosage, initial xanthate concentration, and pH value of wastewater on the removal of xanthate were investigated. The results of scavenging tests and full-spectrum scanning indicate that ·O2- radicals are the main active species in xanthate degradation, and peroxide xanthate is an intermediate. The reusability of BiOI was explored through cyclic experiments. Furthermore, the reaction path and the mechanism of NO removal using BiOI were analyzed, and the main active species was also ·O2-. It is concluded that BiOI photocatalysts have high potential for wastewater treatment and waste gas clean-up in the mineral industry.

Hierarchical bismuthyl bromide microspheres assembled by laminas as efficient negative material for aqueous alkali battery

Bismuth (Bi) based compounds are promising negative materials in aqueous alkali batteries (AABs) for the 3-electron redox chemistry of Bi element within low potentials, the exploration of new Bi-based negative materials is still a meaningful work in this field. Herein, a hierarchical bismuthyl bromide (BiOBr) microspheres material assembled by laminas was prepared via solvothermal reaction and attempted as negative battery material for AAB. The pronounced redox reactions of Bi species in low potential enable high battery capacity, and the porous texture with high hydrophilicity facilitates diffusion of OH- and participation in faradaic reactions. When used as negative battery electrode, the BiOBr could offer decent specific capacity (Cs, 190 mAh g-1 at 1 A g-1), rate capability (Cs remained to 163 mAh g-1 at 8 A g-1) and cycleability (85% Cs retention after 1000 charge-discharge cycles). The AAB based on BiOBr negative electrode could export an energy density (Ecell) of 61.5 Wh kg-1 at power density (Pcell) of 558 W kg-1 and good cycleability. The current work showcases valuable application expansion of a traditional BiOBr photocatalyst in battery typed charge storage.

Enhance the stability of oxygen vacancies in SrTiO3 via metallic Ag modification for efficient and durable photocatalytic NO abatement

Oxygen vacancy engineering is an appealing strategy in the direction of photocatalytic pollutant purification. Unfortunately, the short lifetime of oxygen vacancies significantly limits photocatalytic efficiencies and their application. Herein, we report that such a scenario can be resolved via plasmonic silver metal modification SrTiO₃ containing oxygen vacancies, which can achieve a high NO removal rate of 70.0% and long stability. This outstanding photocatalytic activity can be attributed to the increased optical response range and carrier separation by metallic Ag with the unique character of localized surface plasmonic resonance (LSPR) effect. Moreover, the intrinsic mechanism of how the plasmonic metal could enhance the stability of oxygen vacancies is proposed. The plasmon-driven hot carriers inject SrTiO₃ support that promotes the regeneration of oxygen vacancies around the interface, meanwhile, the introduction of Ag nanoparticles prevents the oxygen vacancies from being filled by the reactant. This work elucidates the unique role of plasmonic metal in photocatalysis, providing an innovative idea for improving catalytic stability.

Surface Modification of TiO2 by Hyper-Cross-Linked Polymers for Efficient Visible-Light-Driven Photocatalytic NO Oxidation

Solar-driven photocatalysis offers an environmentally friendly and sustainable approach for the removal of air pollutants such as nitric oxides without chemical addition. However, the low specific surface area and adsorption capacity of common photocatalysts restrict the surface reactions with NO at the ppb-level. In this study, imidazolium-based hyper-cross-linked polymer (IHP) was introduced to modify the surface of TiO₂ to construct a porous TiO₂/IHP composite photocatalyst. The as-prepared composite with hierarchical porous structure achieves a larger specific surface area as 309 m²/g than that of TiO₂ (119 m²/g). Meanwhile, the wide light absorption range of the polymer has brought about the strong visible-light absorption of the TiO₂/IHP composite. In consequence, the composite photocatalyst exhibits excellent performance toward NO oxidation at a low concentration of 600 ppb under visible-light irradiation, reaching a removal efficiency of 51.7%, while the generation of the toxic NO₂ intermediate was suppressed to less than 1 ppb. The enhanced NO adsorption and the suppressed NO₂ generation on the TiO₂/IHP surface were confirmed by in situ monitoring technology. This work demonstrates that the construction of a porous structure is an effective approach for efficient NO adsorption and photocatalytic oxidation.

Shaddock peel-derived N-doped carbon quantum dots coupled with ultrathin BiOBr square nanosheets with boosted visible light response for high-efficiency photodegradation of RhB

In the present work, we constructed a serials of novel shaddock peel-derived N-doped carbon quantum dots (NCQDs) coupled with BiOBr composites. The result showed that the as-synthesized BiOBr (BOB) was composed of ultrathin square nanosheets and flower-like structure, and NCQDs were uniformly dispersed on the surface of BiOBr. Furthermore, the BOB@NCQDs-5 with optimal NCQDs content displayed the top-flight photodegradation efficiency with ca. 99% of removal rate within 20 min under visible light and possessed excellent recyclability and photostability after 5 cycles. The reason was attributed to relatively large BET surface area, the narrow energy gap, inhibited recombination of charge carriers and excellent photoelectrochemical performances. Meanwhile, the improved photodegradation mechanism and possible reaction pathways were also elucidated in detail. On this basis, the study opens a novel perspective to obtain a highly efficient photocatalyst for practical environment remediation.

Microwave-Assisted Rapid Substitution of Ti for Zr to Produce Bimetallic (Zr/Ti)UiO-66-NH2 with Congenetic "Shell-Core" Structure for Enhancing Photocatalytic Removal of Nitric Oxide

Efficient nitric oxide (NO) removal without nitrogen dioxide (NO₂ ) emission is desired for the control of air pollution. Herein, a series of (Zr/Ti)UiO-66-NH₂ with congenetic shell-core structure, denoted as Ti-UION, are rapidly synthesized by microwave-assisted post-synthetic modification for NO removal. The optimal Ti-UION (i.e., 2.5Ti-UION) exhibits the highest activity of 80.74% without NO₂ emission with moisture, which is 21.65% greater than that of the UiO-66-NH₂ . The NO removal efficiency of 2.5Ti-UION further increases to 95.92% without photocatalyst deactivation under an anhydrous condition. This is because selectively produced NO₂ in photocatalysis is completely adsorbed into micropores, refreshing active sites for subsequent reaction. In addition, the enhanced photocatalytic activity after Ti substitution is due to the presence of Ti electron acceptor, the potential difference between the shell and core of Ti-UION crystal, and the high conductivity of TiO units. Additionally, the improved adsorption of gas molecules not only favors NO oxidation, but also avoids the emission of NO₂ . This work provides a feasible strategy for rapid metal substitution in metal-organic frameworks and insights into enhanced NO photodegradation.

BiOCl Heterojunction photocatalyst: Construction, photocatalytic performance, and applications

BiOCl semiconductors have attracted extensive amounts of attention and have substantial potential in alleviating energy shortages, improving sterilization performance, and solving environmental issues. To improve the optical quantum efficiency of layered BiOCl, the lifetimes of photogenerated electron-hole pairs, and BiOCl reduction capacity. During the past decade, researchers have designed many effective methods to weaken the effects of these limitations, and heterojunction construction is regarded as one of the most promising strategies. In this paper, BiOCl heterojunction photocatalysts designed and synthesized by various research groups in recent years were reviewed, and their photocatalytic properties were tested. Among them, direct Z-scheme and S-scheme photocatalysts have high redox potentials and intense redox capabilities. Hence, they exhibit excellent photocatalytic activity. Furthermore, the applications of BiOCl heterojunctions for pollutant degradation, CO₂ reduction, water splitting, N₂ fixation, organic synthesis, and tumor ablation are also reviewed. Finally, we summarize research on the BiOCl heterojunctions and put forth new insights on overcoming their present limitations.

BiOI-SnO2 Heterojunction Design to Boost Visible-Light-Driven Photocatalytic NO Purification

The efficient, stable, and selective photocatalytic conversion of nitric oxide (NO) into harmless products such as nitrate (NO3-) is greatly desired but remains an enormous challenge. In this work, a series of BiOI/SnO2 heterojunctions (denoted as X%B-S, where X% is the mass portion of BiOI compared with the mass of SnO2) were synthesized for the efficient transformation of NO into harmless NO3-. The best performance was achieved by the 30%B-S catalyst, whose NO removal efficiency was 96.3% and 47.2% higher than that of 15%B-S and 75%B-S, respectively. Moreover, 30%B-S also exhibited good stability and recyclability. This enhanced performance was mainly caused by the heterojunction structure, which facilitated charge transport and electron-hole separation. Under visible light irradiation, the electrons gathered in SnO2 transformed O2 to ·O2- and ·OH, while the holes generated in BiOI oxidized H2O to produce ·OH. The abundantly generated ·OH, ·O2-, and 1O2 species effectively converted NO to NO- and NO2-, thus promoting the oxidation of NO to NO3-. Overall, the heterojunction formation between p-type BiOI and n-type SnO2 significantly reduced the recombination of photo-induced electron-hole pairs and promoted the photocatalytic activity. This work reveals the critical role of heterojunctions during photocatalytic degradation and provides some insight into NO removal.

Charge transfer in metal-organic frameworks

Metal-organic frameworks (MOFs, also known as porous coordination polymers or PCPs) are a novel class of crystalline porous material. The tailorable porous structure, in terms of size, geometry and function, has attracted the attention of researchers across all disciplines of materials science. One of the many exciting aspects of MOFs is that through directional and reversible coordination bonding, organic linkers (chromophores with metal-coordinating functional groups) and metal ions (and clusters) can be spatially organized in a preconceived geometry. The well-defined spatial geometry of the metals and linkers is very advantageous for optoelectronic functions (solar cells, light-emitting diodes, photocatalysts) of the materials. This feature article evaluates the scope of charge transfer (CT) interactions in MOFs, involving the organic linkers and metal ion or cluster components. Irrespective of the type (size, shape, electronic property) of organic chromophores involved, MOFs provide an insightful path to design and make the CT process efficient. The selected examples of MOFs with CT characteristics do not only illustrate the design principles but render a pathway towards understanding the complex photophysical processes and implementing those for future optoelectronic and catalytic applications.

Potassium-Derived Charge Channels in Boron-Doped g-C3N4 Nanosheets for Photocatalytic NO Oxidation and Hydrogen Evolution

The application of graphitic carbon nitride (g-C3N4) in photocatalytic NO oxidation was limited due to severe recombination of photogenerated carriers and low concentration of oxidizing species. In this work, K and B were introduced into the interlayer and in-plane framework of g-C3N4 to address this challenge through the thermal polymerization process. The synthesized K-doped B-g-C3N4 nanosheets exhibited expanded light absorption and low charge recombination efficiency. In addition, the doping of K and B reduced the band gap of g-C3N4, which corresponded to enhanced light absorption. B was introduced into the in-plane structure by replacing C atoms, which adjusted the in-plane electron distribution. K was inserted into the interlayer by binding to the N and C atoms of adjacent layers. K-derived electron transfer channels were constructed, which increased electron delocalization and expanded the π-conjugate system. More electrons were transferred through the interlayer channels and were involved in the reaction process. The severe carrier recombination and weak transfer were improved due to the synergistic effect of K and B doping. K-doped B-g-C3N4 nanosheets exhibited enhanced generation of superoxide radicals and hydroxyl radicals, which played a key role during NO oxidation. The photocatalytic NO oxidation efficiency of codoped g-C3N4 nanosheets reached 61%, which was 2.1 and 1.2 times of that of pristine g-C3N4 and B-doped g-C3N4, respectively. The codoped g-C3N4 sample still exhibited stable photocatalytic NO oxidation efficiency after five cycles. This result provided a potential idea for improving the charge distribution and transfer of layered materials by codoping metallic and nonmetallic elements and for photocatalytic NO oxidation.

Dual-quantum-dots heterostructure with confined active interface for promoted photocatalytic NO abatement

Constructing heterostructure is an effective way to fabricate advanced photocatalysts. However, the catalytic performance of typical common multi-dimensional bulk heterostructure still suffers from the limited active interface and inefficient carrier migration. Herein, we successfully synthesize the SnO₂/Cs₃Bi₂I₉ dual-quantum-dots nanoheterostructure (labeled as SCX, X = 1, 2, 3) for efficiently and stably photocatalytic NO removal under visible light irradiation. The NO removal rate of SC2 is almost 8 and 17 times higher than that of the single SnO₂ and Cs₃Bi₂I₉, respectively. Moreover, the SC2 photocatalyst shows only 3 % attenuation after five consecutive cycles, demonstrating good photocatalytic stability. Systematic experimental characterization and theoretical density functional theory calculations revealed that the high activity and stability of SCX originated from the efficient charge transfer at the confined interface between SnO₂ and Cs₃Bi₂I₉ quantum dots. This work provides a new perspective for constructing innovative dual-quantum-dots nanoheterostructure and assesses their potential in photocatalytic environmental applications.

Fabrication of 2D/2D BiOBr/g-C3N4 with efficient photocatalytic activity and clarification of its mechanism

Precise regulation of photoexcited charge carriers for separation and transportation is a core requirement for practical application in the photocatalysis field. Herein, a 2D/2D BiOBr/g-C₃N₄ heterojunction is prepared by a self-assembly method and exhibits enhanced and stable activity for photocatalytic degradation of bisphenol A (BPA) and norfloxacin (NFA) under visible light. Compared to pure g-C₃N₄, the kinetic constants of BPA and NFA degradation over BiOBr/g-C₃N₄ are enhanced by about 14.74 and 4.01 times, respectively. The separation and transportation mechanism for the photoexcited charge carriers is clarified by electron paramagnetic resonance (EPR), in situ X-ray photoelectron spectroscopy (in situ XPS), and theoretical calculations. The results show that BiOBr/g-C₃N₄ exhibits the feature of a relative p-n junction, in which the charges photoexcited on BiOBr/g-C₃N₄ with high redox potentials can be kept and spatially separated. Moreover, the built-in electric field with the direction of g-C₃N₄ → BiOBr and the opportune band curvature provide the driving force for charge separation and transportation. Additionally, BPA and NFA degradation intermediates are also detected by liquid chromatography-mass spectrometry. It is of great significance to fabricate efficient photocatalysts for environmental purification and other targeted reactions.

Visible-Light-Driven Zr-MOF/BiOBr Heterojunction for the Efficient Synchronous Removal of Hexavalent Chromium and Rhodamine B from Wastewater

With the rapid industrial development, the coexistence of multiple pollutants in wastewater has become a common phenomenon. Thus, developing highly efficient decontamination methods is imperative. In this work, a string of UiO-66-NH₂/BiOBr heterojunctions with varying ratios of BiOBr were prepared and applied to remove hexavalent chromium Cr(VI) and rhodamine B (RhB). The possible growth process of BiOBr nanosheets on UiO-66-NH₂, removal activity of contaminants, and photocatalysis mechanism were investigated. When the mass ratio of UiO-66-NH₂ to BiOBr reaches 1:0.75, the heterojunction (NB-75) shows optimal photocatalytic activity. After 30 min of adsorption, the total removal rates of Cr(VI) (50 mg/L) and RhB (10 mg/L) over NB-75 (0.25 g/L) reaches 96.7% within 120 min of illumination and 98.9% within 80 min of illumination, respectively. For the removal process, there are two factors. The first is the high adsorption capacity for RhB and Cr(VI) owing to the high porosity of UiO-66-NH₂ and interlayer surface positive charge of BiOBr. The second is the improved visible-light photocatalytic performance of the UiO-66-NH₂/BiOBr heterojunction via rapid separation of photoinduced carriers. In addition, the active species capture study reveals that the electrons (e^-) and the superoxide radicals (^•O₂ ^-) play key roles in Cr(VI) reduction, while the holes (h⁺) are major reactive groups participating in the degradation of RhB. This work demonstrated a kind of promising MOF-based photocatalysis material for eliminating Cr(VI) and RhB simultaneously.

Photocatalytic Conversion of Fructose to Lactic Acid by BiOBr/Zn@SnO2 Material

Photocatalysis provides a prospective approach for achieving high-value products under mild conditions. To realize this, constructing a selective, low-cost and environmentally friendly photocatalyst is the most critical factor. In this study, BiOBr/Zn@SnO2 is fabricated by a one-pot hydrothermal synthesis method and BiOBr: SnO2 ratio is 3:1; this material is applied as photocatalyst in fructose selective conversion to lactic acid. The bandgap structure can be regulated via two-step modification, which includes Zn doping SnO2 and Zn@SnO2 coupling BiOBr. The photocatalyst shows excellent conversion efficiency in fructose and high selectivity in lactic acid generation under alkaline conditions. The conversion rate is almost 100%, and the lactic acid yield is 79.6% under optimal reaction conditions. The catalyst is highly sustainable in reusability; the lactic acid yield can reach 67.4% after five runs. The possible reaction mechanism is also proposed to disclose the photocatalysis processes.

Singlet Oxygen and Mobile Hydroxyl Radicals Co-operating on Gas-Solid Catalytic Reaction Interfaces for Deeply Oxidizing NOx

Learning from the important role of porphyrin-based chromophores in natural photosynthesis, a bionic photocatalytic system based on tetrakis (4-carboxyphenyl) porphyrin-coupled TiO₂ was designed for photo-induced treating low-concentration NO_x indoor gas (550 parts per billion), achieving a high NO removal rate of 91% and a long stability under visible-light (λ ≥ 420 nm) irradiation. Besides the great contribution of the conventional ^•O₂^- reactive species, a synergic effect between a singlet oxygen (¹O₂) and mobile hydroxyl radicals (^•OH_f) was first illustrated for removing NO_x indoor gas (¹O₂ + 2NO → 2NO₂, NO₂ + ^•OH_f → HNO₃), inhibiting the production of the byproducts of NO₂. This work is helpful for understanding the surface mechanism of photocatalytic NO_x oxidation and provides a new perspective for the development of highly efficient air purification systems.

Electron-Level Mechanistic Insights into Ce Doping for Enhanced Efficiency Degradation of Bisphenol A under Visible Light Irradiation

Bismuth oxybromide (BiOBr), with its special layered structure, is known to have potential as a visible-light-driven photocatalyst. However, the rapid recombination and short lifetime of the photogenerated carriers of BiOBr restrict its photocatalytic efficiency for the degradation of organic pollutants. Given the similar ionic size of Ce and Bi, Ce atoms might be easily introduced into the crystal of BiOBr to tailor its band structure. In this study, Ce doped BiOBr (Ce-BiOBr) samples with different percentages of Ce contents were prepared via a hydrothermal method. The intrinsic photocatalytic efficiency of Ce_0.2-BiOBr for the degradation of bisphenol A (BPA) was 3.66 times higher than that of pristine BiOBr under visible light irradiation. The mechanism of Ce-doping modification for the enhanced photocatalytic performance was demonstrated based on a series of experiments and DFT calculation. The narrowed bandgap, the enhanced charge separation efficiency and Ce-doping energy level contributed to the remarkable photocatalytic performance of Ce-BiOBr.

Nanosized Zn-In spinel-type sulfides loaded on facet-oriented CeO2 nanorods heterostructures as Z-scheme photocatalysts for efficient elemental mercury removal

Developing of effective photocatalysts is of great significance for realizing photocatalytic environment purification. Herein, an interfacial bent bands and internal electric field modulated CeO₂/ZnIn₂S₄ Z-scheme heterojunction for photocatalytic Hg⁰ oxidation. It is found that the charge transfer mechanism of Z-scheme was driven by the interfacial bent bands and internal electric field, which was confirmed by electrochemical measurements, electron spin paramagnetic resonance spectroscopy and density functional theory calculations. Moreover, the (110) dominant CeO₂ nanorods partially converted Ce⁴⁺ to Ce³⁺ and formed oxygen vacancies, and as an electron mediator in Z-scheme systems to further facilitate charge transfer process and molecular oxygen activation. Under the strong synergistic effect between the large specific surface area, Z-scheme heterojunction and oxygen vacancies, the optimized photocatalyst exhibits 86.7% of photocatalytic removal efficiency. This work provides Z-scheme heterojunction photocatalyst design perspective for photocatalytic air purification.

Tin dioxide nanomaterial-based photocatalysts for nitrogen oxide oxidation: a review

Semiconducting SnO₂ photocatalyst nanomaterials are extensively used in energy and environmental research because of their outstanding physical and chemical properties. In recent years, nitrogen oxide (NO _x ) pollutants have received particular attention from the scientific community. The photocatalytic NO _x oxidation will be an important contribution to mitigate climate change in the future. Existing review papers mainly focus on applying SnO₂ materials for photocatalytic oxidation of pollutants in the water, while studies on the decomposition of gas pollutants are still being developed. In addition, previous studies have shown that the photocatalytic activity regarding NO _x decomposition of SnO₂ and other materials depends on many factors, such as physical structure and band energies, surface and defect states, and morphology. Recent studies have been focused on the modification of properties of SnO₂ to increase the photocatalytic efficiency of SnO₂, including bandgap engineering, defect regulation, surface engineering, heterojunction construction, and using co-catalysts, which will be thoroughly highlighted in this review.

Structural engineering of BiOBr nanosheets for boosted photodegradation performance toward rhodamine B

A series of BiOBr nanosheets were synthesized through a facile solvothermal method, whose structures were adjusted by changing solvent ratios. Their photodegradation properties toward rhodamine B (RhB) were further investigated under visible light irradiation. The photocatalytic results indicated that the B-1:3 sample showed superior photoactivity and the RhB removal efficiency attained 97% within 30 min. The outstanding photodegradation activity can be ascribed to the small particle size and thickness, suppressed e⁻–h⁺ pair recombination and more active electrons and holes. Moreover, free radical quenching experiments suggest that ·O₂⁻ and h⁺ play a crucial role in improving photoactivity. This work opens a new avenue to boost the removal rate of organic pollutants by engineering the solvent ratios of photocatalysts in the wastewater treatment field.

A series of BiOBr nanosheets were synthesized through a facile solvothermal method, whose structures were adjusted by changing solvent ratios.

Promotion mechanism of -OH group intercalation for NOx purification on BiOI photocatalyst

Bismuth oxyiodide (BiOI) is a traditional layered oxide photocatalyst that performs in a wide visible-light absorption band, owing to its appropriate band structure. Nevertheless, its photocatalytic efficiency is immensely inhibited due to the serious recombination of photogenerated charge carriers. Herein, this great challenge is addressed via a new strategy of intralayer modification by -OH groups in BiOI, which leads to enhancement of the reactants' activation capacity to promote photocatalytic activity and generate more active species. Furthermore, analysis via a combination of experimental and theoretical methods revealed that the -OH group-functionalized samples reduce the energy barriers for conversion of the main intermediate (NO₂), which is easily transformed to NO₂^-, thus accelerating the oxidation of NO to the final product (NO₃^-). This study gives insight into NO oxidation, improving the photocatalytic efficiency, and mastering the photocatalysis reaction mechanism to curb air pollution.

Peroxymonosulfate activation through 2D/2D Z-scheme CoAl-LDH/BiOBr photocatalyst under visible light for ciprofloxacin degradation

The synergistic effect between photocatalytic and peroxymonosulfate (PMS) activation has been widely applied in the field of sewage treatment. In this work, we synthesized a two-dimensional/two-dimensional (2D/2D) CoAl-LDH/BiOBr Z-scheme photocatalyst via a simple method. Then, multiple detection results demonstrated that CoAl-LDH was successfully anchored onto BiOBr, as well as formed an intimate interaction. Moreover, the photocatalytic degradation performance of the catalysts/PMS/vis system had been explored under several conditions (e.g., different catalyst doses, PMS doses, anions and pollutants). The 8 wt% CoAl-LDH/BiOBr composite exhibited the highest degradation efficiency (96%) of ciprofloxacin (CIP). In addition, radicals quenching experiments and electron paramagnetic resonance (EPR) indicated that •O₂- and ¹O₂ were the primary radicals for CIP degradation. The photoelectrochemical measurement and photoluminescence (PL) confirmed that 8 wt% CoAl-LDH/BiOBr exhibited the highest separation and transfer rate of charge carriers. The liquid chromatography-mass spectrometer (LC-MS) analysis revealed that oxidation of the piperazine ring and defluorination were the main CIP degradation pathways. Density functional theory (DFT) calculation, including the laplacian bond order (LBO) and Fukui index, which was consistent with the results of LC-MS. This study explained the superiority of the synergistic effect between photocatalysis and PMS activation on the degradation of pollutants.

Synthesis of Cu3P/SnO2 composites for degradation of tetracycline hydrochloride in wastewater

Antibiotic drugs have become dominating organic pollutants in water resources, and efficient removal of antibiotic drugs is the priority task to protect the water environment. Cu₃P/SnO₂ photocatalysts of various Cu₃P loadings (10-40 wt% Cu₃P) were synthesized using a combination of hydrothermal synthesis and a partial annealing method. Their photocatalytic activity was tested for tetracycline hydrochloride (TC-HCl) degradation under visible light irradiation. Cu₃P/SnO₂ samples were characterized by X-ray diffraction (XRD), N₂-adsorption, ultraviolet-visible diffuse reflectance spectra (UV-vis DRS), scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). The results showed that the p-n type heterostructure between Cu₃P and SnO₂ was successfully constructed, and addition of Cu₃P to SnO₂ could improve its photocatalytic activity at an optimized loading of 30 wt% Cu₃P. In photocatalytic degradation studies, removal rates of around 80% were found in 30 minutes of dark reaction and 140 min of photodegradation. The removal rate was superior to that of Cu₃P and SnO₂ alone under the same experimental conditions. According to trapping experiments and electron spin resonance (ESR) measurements, photogenerated holes (h⁺) and superoxide radicals ˙O₂ ^- were considered as the main oxidation species in the present system. Finally, the reuse experiments showed high stability of Cu₃P/SnO₂. This study reports Cu₃P as a cocatalyst combined with semiconductor SnO₂ to form a highly efficient heterogeneous photocatalyst for the degradation of tetracycline hydrochloride for the first time.

Photoelectrochemical Assay Based on SnO2/BiOBr p-n Heterojunction for Ultrasensitive DNA Detection

Herein, a photoelectrochemical (PEC) assay was designed for a highly sensitive DNA determination relying upon the SnO₂/BiOBr p-n heterojunction as a photoactive material and SiO₂ as a signal quencher. Compared with most traditional heterojunctions, the SnO₂/BiOBr p-n heterostructure not only lessened the recombination of the photogenerated electron-hole pairs but also promoted the light-harvesting in the ultraviolet-visible (UV-vis) region, leading to further enhanced photoelectric conversion efficiency and photocurrent, which demonstrated 12.1-fold and 6.4-fold increments versus those of pure SnO₂ and BiOBr, respectively. Additionally, the limited quantity of target DNA (a fragment of p53 gene) could be transformed into abundant output DNA-SiO₂ by employing the Nt·BstNBI enzyme-assisted signal amplification procedure, leading to a highly improved detection sensitivity of the biosensor. Then, output DNA-SiO₂ hybridized with the capture DNA anchored on the modified electrode surface, remarkably diminishing the PEC signal and thus achieving sensitive DNA determination. The elaborated PEC biosensor demonstrated outstanding performance within the linear range between 0.5 fM and 5 nM and a low limit of detection down to 0.18 fM, paving a new way for fabricating heterojunction with exceptional photoactive performance and demonstrating the enormous potential for detecting multitudinous biomarkers in bioanalysis and clinical therapy.

Insight into the role of copper in the promoted photocatalytic removal of NO using Zn2-xCuxCr-CO3 layered double hydroxide

In this work the ability of Zn_2-xCu_xCr-CO₃ layered double hydroxides (LDHs) as highly efficient DeNOx photocatalysts was studied. LDHs with x = 0, 0.2 and 0.4 were prepared using a coprecipitation method. The samples were characterized by different techniques such as XRD, XPS, FT-IR, ICP-MS, TG, SBET, SEM and Diffuse reflectance (DR). The increased amount of copper ions in the LDH layers gave rise to slight changes in the structure and morphology and an important variation of the optical properties of the LDHs. The prepared ZnCuCr-CO₃ photocatalysts exhibited favourable conversion efficiency (51%) and an extraordinary selectivity (97%) for the photochemical NO abatement. The photochemical mechanism was elucidated from DOS, EPR, Femtosecond transient absorption and in-situ DRIFTS studies. The results suggested that the presence of Cu²⁺ ions in the LDH framework introduced new states in the valence band states, thus favouring the production and mobility of e^-/h⁺ charge carriers and a greater production of ⋅O₂^- and ⋅OH.

Rational design of built-in stannic oxide-copper manganate microrods p-n heterojunction for photoelectrochemical sensing of tetracycline

Tetracycline (TC), a popularly found drug pollutant, can be contaminated in food and aquatic regions and causes a severe impact on human health. In this research, a visible light active p-stannic oxide/n-copper manganate (p-SnO₂/n-CuMnO₂) heterojunction was synthesized and has been applied for a signal on photoelectrochemical sensing of antibiotic TC. Firstly, the n-SnO₂ microrods were synthesized via a simple and efficient homogeneous precipitation method and the p-CuMnO₂ nanoparticles were synthesized by a facile ultrasound-assisted hydrothermal method. The SnO₂/CuMnO₂ microrods p-n heterojunction was prepared through a simple impregnation method and physicochemical properties of the microrods are characterized by using X-ray diffraction (XRD), Raman, Brunauer-Emmett-Teller (BET), Fourier-transform infrared (FTIR), UV-Vis diffuse reflectance spectroscopy (UVDRS), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and Mott-Schottky analyses. The photoelectrochemical sensing performance of SnO₂/CuMnO₂ microrods was 2.7 times higher than that of as-synthesized pure SnO₂ microrods is due to the more visible light absorption ability and p-n heterojunction (synergy). The designed SnO₂/CuMnO₂/ITO sensor gives photocurrent signals for the detection of TC in the range of 0.01-1000 μM with the detection limit (LOD) of 5.6 nM. The practical applicability of the sensor was monitored in cow milk and the Taipei River water sample.

Superhydrophobic Self-Supporting BiOBr Aerogel for Wastewater Purification

This research was focused on the raw material level construction of bismuth oxybromide (BiOBr) catalysis-loaded 3D cross-linked network polyurethane (PU) foam via the in situ polymerization method. After modification of superhydrophobic polydivinylbenzene nanoparticles, the PU foam possessed excellent superhydrophobic stability. The larger selective absorption oil phase capacity depended on its macroporous structure, and the existence of catalyst BiOBr (the band gap energy was about 2.57 eV) among the PU foam played a crucial role in degrading water-soluble contaminants under visible light irradiation. In this article, the photocatalytic experiment results verify that it has remarkable recycle degradation ability (the degradation efficiency can reach ∼97%) and the capture experiments indicate that the uppermost active species is h⁺.