Violet-Blue Emitters Featuring Aggregation-Enhanced Emission Characteristics for Nondoped OLEDs with CIEy Smaller than 0.046

Robust luminogens as cutting-edge tools for efficient light emission in recent decades

Blue luminogens play a vital role in white lighting and potential metal-free fluorescent materials and their high-lying excited states contribute to harvesting triplet excitons in devices. However, in TADF-OLEDs (ΔEST < 0.1 eV), although T1 excitons transfer to S1via RISC with 100% IQE, the longer lifetime of blue TADF suffers from efficiency roll-off (RO). In this case, hybridized local and charge transfer (HLCT) materials have attracted significant interest in lighting owing to their 100% hot exciton harvesting and enhanced efficiency. Both academics and industrialists widely use the HLCT strategy to improve the efficiency of fluorescent organic light-emitting diodes (FOLEDs) by harvesting dark triplet excitons through the RISC process. Aggregation-induced emissive materials (AIEgens) possess tight packing in the aggregation state, and twisted AIEgens with HLCT behaviour have a shortened conjugation length, inducing blue emission and making them suitable candidates for OLED applications. TTA-OLEDs are used in commercial BOLEDs because of their moderate efficiency and reasonable operation lifetime. In this review, we discuss the devices based on TTA fluorophores, TADF fluorophores, HLCT fluorophores, AIEgens and HLCT-sensitized fluorophores (HLCT-SF), which break through the statistical limitations.

High-Performance Ultraviolet Organic Light-Emitting Diodes Enabled by Double Boron-Oxygen-Embedded Benzo[m]tetraphene Emitters

Ultraviolet organic light-emitting diodes (UV OLEDs) have attracted increasing attention because of their promising applications in healthcare, industry, and agriculture; however, their development has been hindered by the shortage of robust UV emitters. Herein, we embedded double boron-oxygen units into nonlinear polycyclic aromatic hydrocarbons (BO-PAHs) to regulate their molecular configurations and excited-state properties, enabling novel bent BO-biphenyl (BO-bPh) and helical BO-naphthyl (BO-Nap) emitters with hybridized local and charge-transfer (HLCT) characteristics. They could be facilely synthesized in gram-scale amounts via a highly efficient two-step route. BO-bPh and BO-Nap showed strong UV and violet-blue photoluminescence in toluene with full width at half-maximum values of 25 and 37 nm, along with quantum efficiencies of 98 and 99%, respectively. A BO-bPh-based OLED showed high color purity UV electroluminescence peaking at 394 nm with Commission Internationale de l'Eclairage (CIE) coordinates of (0.166, 0.021). Moreover, the device demonstrated a record-high maximum external quantum efficiency (EQE) of 11.3%, achieved by successful hot exciton utilization. This work demonstrates the promising potential of double BO-PAHs as robust emitters for future UV OLEDs.

Non-Doped Blue AIEgen-Based OLED with EQE Approaching 10.3

Aggregation-induced emission (AIE) luminogens (AIEgens) are attractive for the construction of non-doped blue organic light-emitting diodes (OLEDs) owning to their high emission efficiency in the film state. However, the large internal inversion rate (kIC (Tn) ) between high-lying triplet levels (Tn ) and Tn-1 causes a huge loss of triplet excitons, resulting in dissatisfied device performance of these AIEgens-based non-doped OLEDs. Herein, we designed and synthesized a blue luminogen of DPDPB-AC by fusing an AIEgen of TPB-AC and a DMPPP, which feature hot exciton and triplet-triplet annihilation (TTA) up-conversion process, respectively. DPDPB-AC successfully inherits the AIE feature and excellent horizontal dipole orientation of TPB-AC. Furthermore, it owes smaller kIC (Tn) than TPB-AC. When DPDPB-AC was applied in OLED as non-doped emitting layer, an outstanding external quantum efficiency of 10.3 % and an exceptional brightness of 69311 cd m-2 were achieved. The transient electroluminescent measurements and steady-state dynamic analysis confirm that both TTA and hot exciton processes contribute to such excellent device performance. This work provides a new insight into the design of efficient organic fluorophores by managing high-lying triplet excitons.

Halogen Bond-Driven Aggregation-Induced Emission Skeleton: N-(3-(Phenylamino)allylidene) Aniline Hydrochloride

Aggregation-induced emission (AIE) is a unique photophysical process, and its emergence brings a revolutionary change in luminescence. However, AIE-based research has been limited to a few classical molecular skeletons, which is unfavorable for in-depth studies of the photophysical characteristics of AIE and the full exploitation of their potential values. There is an urgent need to develop new skeletons to rise to the challenges of an insufficient number of AIE core structures and difficult modification. Here, we report a novel dumbbell AIE skeleton, in which two phenyls are connected through (E)-3-iminoprop-1-en-1-amine. This skeleton shows extremely strong solid-state emission with an absolute quantum yield up to 69.5%, a large Stokes shift, and typical AIE characteristics, which well resolves the challenge of difficult modification and low luminous efficiency of the traditional AIE skeletons. One-step reaction, high yield, and diversified modification endow the skeleton with great scalability from simple to complicated, or from symmetrical to asymmetrical structures, which establishes the applicability of the skeleton in various scenarios. These molecules self-assemble into highly ordered layer-, rod-, petal-, hollow pipe-, or helix-like nanostructures, which contribute to strong AIE emission. Crystallographic data reveal the highly ordered layer structures of the aggregates with different substituents, and a novel halogen bond-driven self-assembly mechanism that restricts intramolecular motion is clearly discovered. Taking advantage of these merits, a full-band emission system from green to red is successfully established, which displays great potential in the construction of light-emitting films and advanced light-emitting diodes. The discovery of this AIE skeleton may motivate a huge potential application value in luminescent materials and lead to hitherto impossible technological innovations.

Conjugating Coumarin with Tetraphenylethylene to Achieve Dual-State Emission for Reversible Mechanofluorochromism and Live Cell Imaging

Dual-state emission luminogens (DSEgens) are receiving research interest in the construction of multifunctional materials due to their inherent advantage of high emission efficiency in both the molecularly dispersed solution state and the solid state. However, it remains challenging in synthesizing DSEgens via a delicate manipulation of the molecular structures. This work presents an example of bright DSEgen synthesis by tuning the molecular electronic structures and conformations. Three coumarin-tetraphenylethylene (TPE) molecules with a donor-acceptor electronic structure and highly twisting conformations have been synthesized. While compound resulting from direct conjugation of coumarin with a TPE unit shows aggregation-induced emission, compound with an N,N-diaminoethyl modification on the 7-position of coumarin and compound with a further phenyl linker between coumarin and TPE units feature strong dual-state emission. Benefiting from their strong solid emission and twisting conformations, these fluorophores display reversible mechanofluorochromism. Finally, applications for rewritable information storage in the solid state and live-cell imaging in the solution state were demonstrated.

Organic Electroluminescent Materials Possessing Intra- and Intermolecular Hydrogen Bond Interactions: A Mini-Review

Organic light-emitting diodes (OLEDs) have become the predominant technology in display applications because of their superior light weight, flexibility, power conservation, and environmental friendliness, among other reasons. The device’s performance is determined by the intrinsic properties of organic emitters. The aggregation structure of emitters, in particular, is crucial for color purity and efficiency. Intra- and intermolecular interactions, such as hydrogen bonds (H-bonds), can reduce structural vibrations and torsions, which affect the stability of emitting layer films and optoelectronic properties of emitting materials. Hence, by regulating the H-bond interaction, the desired properties could be obtained. This mini-review focuses on the influence of intra- and intermolecular H-bond interactions on the optoelectronic properties of high-performance emitters.

Indolo[3,2,1-jk]carbazole-Derived Narrowband Violet-Blue Fluorophores: Tuning the Optical and Electroluminescence Properties by Chromophore Juggling

The development of rigid polyaromatic building blocks for narrowband violet fluorophores has received tremendous attention. Herein, we designed and synthesized two new triangle-shaped rigid building blocks, namely, 2,5-di-tert-butylindolo[3,2,1-jk]carbazole (tBuICz) and 2,11-di-tert-butylindolo[3,2,1-jk]carbazole-4-carbonitrile (tBuICzCN), and tethered them with different chromophores to yield a series of violet-blue fluorophores, viz., ICzTPA-ICzPICN, and studied their structure-function relationship. The appended chromophores and cyano unit played a vital role in controlling the optical and electrical properties of the compounds. Except triphenylamine-substituted derivatives, the compounds showed pure violet emission (λ_em ≤ 403 nm). Intriguingly, the compounds exhibited narrow-band emission with a full-width at half-maximum ≤ 40 nm, attributed to the rigidity of the ICz core. The emission of the compounds displayed positive solvatochromism, which is ascribed to the photoinduced intramolecular charge transfer in the excited state. The compounds revealed excellent thermal robustness with T_5d ≥ 363 °C. The triphenylamine-featuring derivatives displayed a high-lying HOMO compared to their congeners due to their electron-rich nature. When we applied these materials in organic light-emitting diodes, ICzPI outperformed in the series with an EQE_max of 3.07% and a current efficiency of 1.04 cd/A. Notably, its CIEy ∼ 0.046 precisely matched with the Rec.2020 standard of deep-blue color (CIEy ∼ 0.046).

Synthesis and Photophysical Properties of Quinoxaline-Based Blue Aggregation-Induced Emission Molecules

A series of quinoxaline-based compounds 1–4 have been synthesized by Palladium-Catalyzed cross-coupling reaction and their photophysical properties have been extensively studied. Compounds 1–4 show deep blue light emission both in solution (λem ≤ 425 nm, CIEy≤0.03) and in solid-state. Moreover, compounds 1–3 show a non-typical aggregation-induced enhanced emission (AIEE), which would be effective deep blue light-emitting materials. The DFT calculation indicated that the HOMO energy levels of compounds 1–3 are distributed throughout the molecule, and the LUMO energy levels are mainly concentrated on the quinoxaline group. while the HOMO of compound 4 is mainly on the benzene ring at 2,3-position, and the LUMO is distributed both of the quinoxaline and the benzaldehyde group at the 6,7-position.

Aggregation-induced emission luminogen with excellent triplet-triplet upconversion efficiency for highly efficient non-doped blue organic light-emitting diodes

By combining aggregation-induced emission (AIE) effect and a triplet-triplet upconversion (TTU) process, a blue emitter with excellent photoluminescence quantum efficiency and high upconversion efficiency in the film state is developed, from which a highly efficient non-doped blue TTU organic light-emitting diode (TTU-OLED) was realized.

Rational Design and Facile Synthesis of Dual-State Emission Fluorophores: Expanding Functionality for the Sensitive Detection of Nitroaromatic Compounds

Six novel benzimidazole-based D-π-A compounds 4 a-4 f were concisely synthesized by attaching different donor/acceptor units to the skeleton of 1,3-bis(1H-benzimidazol-2-yl)benzene on its 5-position through an ethynyl link. Due to the twisted conformation and effective conjugation structure, these dual-state emission (DSE) molecules show intense and multifarious photoluminescence, and their fluorescence quantum yields in solution and solid state can be up to 96.16 and 69.82 %, respectively. Especially, for excellent photostability, obvious solvatofluorochromic and extraordinary wide range of solvent compatibility, DSE molecule 4 a is a multifunctional fluorescent probe for the visual detection of nitroaromatic compounds (NACs) with the limit of detection as low as 10^-7 M. The quenching mechanism has been proved as the results of photoinduced electron transfer and fluorescence resonance energy transfer processes. Importantly, probe 4 a can sensitively detect NACs not only in real water samples, but also on 4 a-coated strips and 4 a@PBAT thin films.

Aggregation-induced emission (AIE): emerging technology based on aggregate science

Functional materials serve as the basic elements for the evolution of technology. Aggregation-induced emission (AIE), as one of the top 10 emerging technologies in chemistry, is a scientific concept coined by Tang, et al. in 2001 and refers to a photophysical phenomenon with enhanced emission at the aggregate level compared to molecular states. AIE-active materials generally present new properties and performance that are absent in the molecular state, providing endless possibilities for the development of technological applications. Tremendous achievements based on AIE research have been made in theoretical exploration, material development and practical applications. In this review, AIE-active materials with triggered luminescence of circularly polarized luminescence, aggregation-induced delayed fluorescence, room-temperature phosphorescence, and clusterization-triggered emission at the aggregate level are introduced. Moreover, high-tech applications in optoelectronic devices, responsive systems, sensing and monitoring, and imaging and therapy are briefly summarized and discussed. It is expected that this review will serve as a source of inspiration for innovation in AIE research and aggregate science.

Aggregation induced emission based active conjugated imidazole luminogens for visualization of latent fingerprints and multiple anticounterfeiting applications

Aggregation-induced emission based organic heterocyclic luminogens bearing conjugated electronic structures showed much attention due to its excellent fluorescence in aggregation state. In this communication, a novel conjugated blue light emitting imidazole molecule is synthesized by one pot multicomponent reaction route is reported for the first time. The prepared molecule exhibits a strong fluorescence in aggregation state with exceptional properties, such as high purity, inexpensive, eco-friendly, large scale production, high photostability, etc. By considering these advantages, a new fluorescence based platform has been setup for in-situ visualization of latent fingerprints and its preservation by spray method followed by Poly(vinyl alcohol) masking. A clear and well defined fluorescence fingerprint images are noticed on variety of surfaces by revealing level 1-3 ridge features upon ultraviolet 365 nm light exposure. The dual nature of binding specificity as well as excellent fluorescence properties permits the visualization of latent fingerprints for longer durations (up to 365 days) with superior contrast, high sensitivity, efficiency, selectivity and minimal background hindrance. We further fabricated unclonable invisible security ink for various printing modes on valuable goods for protection against forging. The developed labels are displaying uniform distribution of ink and exceptional stability under various atmospheric environments. The development of long preservative information using aggregation-induced emission based luminogen opens up a new avenue in advanced forensic and data security applications.

Multifunctional Materials Serving as Efficient Non-Doped Violet-Blue Emitters and Host Materials for Phosphorescence

Efficient multifunctional materials acting as violet-blue emitters, as well as host materials for phosphorescent OLEDs, are crucial but rare due to demand that they should have high first singlet state (S₁ ) energy and first triplet state (T₁ ) energy simultaneously. In this study, two new violet-blue bipolar fluorophores, TPA-PI-SBF and SBF-PI-SBF, were designed and synthesized by introducing the hole transporting moiety triphenylamine (TPA) and spirobifluorene (SBF) unit that has high T₁ into high deep blue emission quantum yield group phenanthroimidazole (PI). As the results, the non-doped OLEDs based on TPA-PI-SBF exhibited excellent EL performance with a maximum external quantum efficiency (EQE_max ) of 6.76 % and a violet-blue emission with Commission Internationale de L'Eclairage (CIE) of (0.152, 0.059). The device based on SBF-PI-SBF displayed EQE_max of 6.19 % with CIE of (0.159, 0.049), which nearly matches the CIE coordinates of the violet-blue emitters standard of (0.131, 0.046). These EL performances are comparable to the best reported non-doped deep or violet-blue emissive OLEDs with CIEy<0.06 in recent years. Additionally, the green, yellow and red phosphorescent OLEDs with TPA-PI-SBF and SBF-PI-SBF as host materials achieved a high EQE_max of about 20 % and low efficiency roll-off at the ultra-high luminance of 10 000 cd m^-2 . These results provided a new construction strategy for designing high-performance violet-blue emitters, as well as efficient host materials for phosphorescent OLEDs.

Strategic Synchronization of 7,7-Dimethyl-5,7-dihydroindeno[2,1-b]carbazole for Narrow-Band, Pure Violet Organic Light-Emitting Diodes with an Efficiency of > 5% and a CIE y Coordinate of < 0.03

A novel violet emitter, 1,3-bis[10,10-dimethyl-10H-indeno[2,1-b]]indolo[3,2,1-jk]indolo[1',2',3':1,7]indolo[3,2-b]carbazole (m-FLDID), was designed and synthesized by meta-oriented bis-fusion of two 7,7-dimethyl-5,7-dihydroindeno[2,1-b]carbazole (DMID) subunits for use in a pure violet organic light-emitting diode (OLED). Incorporation of the DMID subunits effectively reduced the nonradiative recombination rate, improving the photoluminescence quantum yield of the m-FLDID emitter. The meta-oriented bis-fusion of the two DMID subunits not only triggered an alternative distribution of the frontier orbitals but also effectively locked the π-conjugation chain, which ultimately resulted in a narrow-band, pure violet emission of the m-FLDID emitter. Doped m-FLDID devices possessed an external quantum efficiency (EQE) of > 5%, pure violet emission with a maximum at 407 nm, a narrow full width at half-maximum of 17 nm, and a Commission Internationale de l'éclairage y coordinate of less than 0.03. This is the first work reporting an EQE of > 5% and an extremely narrow emission spectrum for a pure violet emitter.

Unraveling the Important Role of High-Lying Triplet-Lowest Excited Singlet Transitions in Achieving Highly Efficient Deep-Blue AIE-Based OLEDs

Aggregation-induced emission (AIE) materials are attractive for achieving highly efficient nondoped organic light-emitting diodes (OLEDs) owing to their strong luminescence in the solid state. However, the electroluminescence efficiency of most AIE-based OLEDs remains low owing to the waste of triplet excitons. Here, using theoretical calculations, photophysical dynamics, and magnetoluminescence measurements, the spin conversion process is demonstrated between the high-lying triplet state (T_n ) and the lowest excited singlet state (S₁ ) in AIE materials. Moreover, the relative positions of T_n (n < 4) and S₁ are shown to have a significant impact on the spin-conversion efficiency, thus influencing the harvesting of triplet excitons and the device efficiency. Finally, by selecting an upconversion material with an appropriate energy level for further utilizing the triplet excitons, a deep-blue fluorescent OLED with CIE coordinates of (0.15, 0.08), a maximum external quantum efficiency of 10.2%, low efficiency roll-off, and a high brightness of 16817 cd m^-2 is developed. This is one of the most efficient deep-blue OLEDs based on AIE materials reported so far. These findings also provide new insights into the design of more efficient AIE molecules and corresponding OLEDs by managing high-lying triplet excitons.