Dopamine Sensing Based on Ultrathin Fluorescent Metal-Organic Nanosheets

Ultrasound-assisted synthesis of a Eu3+-functionalized ZnII coordination polymer as a fluorescent dual detection probe for highly sensitive recognition of HgII and L-Cys

A new ZnII coordination polymer (CP) based on 2,3-pyrazine dicarboxylic acid (H2pzdc) and 4,4'-bipyridine (bpy) (ZCP) was synthesized using a facile slow evaporation method. Single-crystal X-ray diffraction revealed that ZCP is a two-dimensional porous CP, [Zn2(pzdc)2(bpy)(H2O)2]n, with van der Waals forces as the dominant interaction within its layers forming a 63 network. Employing energetic ultrasound irradiation, nanoscale ZCP (nZCP) was successfully synthesized and Eu3+ ions were incorporated within its host lattice (Eu@nZCP). The resulting platform exhibits superior fluorescence characteristics and demonstrates notable optical durability. Therefore, it was used as a dual detection fluorescent sensing platform for the detection of mercury and L-cysteine (L-Cys) in aqueous media through a turn-off/on strategy. In the turn-off process, the fluorescence emission of Eu@nZCP progressively quenches by the addition of HgII via a photo-induced electron transfer (PET) mechanism. The fluorescence of Eu@nZCP is quenched to establish a low fluorescence background through the incorporation of HgII. This devised turn-on fluorescent system is suitable for the recognition of L-Cys (based on the strong affinity of L-Cys to the HgII ion) through a quencher detachment mechanism. This method attained a relatively wide linear range, spanning from 0.001 to 25 µM, with the low detection limit of 5 nM for the sensing of HgII. Also, the corresponding limit of detection (LOD) for L-Cys is 8 nM in a relatively wide linear range, spanning from 0.001 to 40 µM.

Quantitative determination of dopamine in the presence of interfering substances supported by machine learning tools

In the field of neuroscience as well as in the clinical setting, the neurotransmitter dopamine (DA) is an analyte which is important for research as well as medical purposes. There are plenty of methods available to measure dopamine quantitatively, with voltammetric ones such as differential pulse voltammetry (DPV) being among the most convenient and simple ones. However, dopamine often occurs, either naturally or because of the requirements of involved enzymatic systems, alongside substances that can influence the signal it produces upon electrochemical conversion. An example for such substances is the magnesium ion, which itself is not electrochemically active in the potential range needed for DA oxidation, but influences the dopamine signal. We have characterized the properties of DPV signals subject to the interaction between DA and Mg2+ and show that, although these properties are changing in a nonlinear fashion when both concentrations are varying, relatively simple linear mathematical models can be used to determine dopamine concentrations quantitatively in the presence of magnesium ions. The focus of this study is thus, the mathematical treatment of experimental data in order to overcome an analytical problem and not the investigation of the chemical background of DA-Mg2+ interaction.

Miniaturized Implantable Fluorescence Probes Integrated with Metal-Organic Frameworks for Deep Brain Dopamine Sensing

Continuously monitoring neurotransmitter dynamics can offer profound insights into neural mechanisms and the etiology of neurological diseases. Here, we present a miniaturized implantable fluorescence probe integrated with metal-organic frameworks (MOFs) for deep brain dopamine sensing. The probe is assembled from physically thinned light-emitting diodes (LEDs) and phototransistors, along with functional surface coatings, resulting in a total thickness of 120 μm. A fluorescent MOF that specifically binds dopamine is introduced, enabling a highly sensitive dopamine measurement with a detection limit of 79.9 nM. A compact wireless circuit weighing only 0.85 g is also developed and interfaced with the probe, which was later applied to continuously monitor real-time dopamine levels during deep brain stimulation in rats, providing critical information on neurotransmitter dynamics. Cytotoxicity tests and immunofluorescence analysis further suggest a favorable biocompatibility of the probe for implantable applications. This work presents fundamental principles and techniques for integrating fluorescent MOFs and flexible electronics for brain-computer interfaces and may provide more customized platforms for applications in neuroscience, disease tracing, and smart diagnostics.

Europium Ion-Based Magnetic-Trapping and Fluorescence-Sensing Method for Detection of Pathogenic Bacteria

Europium ions (Eu3+) have been utilized as a fluorescence-sensing probe for a variety of analytes, including tetracycline (TC). When Eu3+ is chelated with TC, its fluorescence can be greatly enhanced. Moreover, Eu3+ possesses 6 unpaired electrons in its f orbital, which makes it paramagnetic. Being a hard acid, Eu3+ can chelate with hard bases, such as oxygen-containing functional groups (e.g., phosphates and carboxylates), present on the cell surface of pathogenic bacteria. Due to these properties, in this study, Eu3+ was explored as a magnetic-trapping and sensing probe against pathogenic bacteria present in complex samples. Eu3+ was used as a magnetic probe to trap bacteria such as Staphylococcus aureus, Escherichia coli, Enterococcus faecalis, Acinetobacter baumannii, Bacillus cereus, and Pseudomonas aeruginosa. The addition of TC facilitated the easy detection of magnetic Eu3+-bacterium conjugates through fluorescence spectroscopy, with a detection limit of approximately ∼104 CFU mL-1. Additionally, matrix-assisted laser desorption/ionization mass spectrometry was employed to differentiate bacteria tapped by our magnetic probes.

The luminescent principle and sensing mechanism of metal-organic framework for bioanalysis and bioimaging

Metal-organic frameworks (MOFs) porous material have obtained more and more attention during the past decade. Among various MOFs materials, luminescent MOFs with specific chemical characteristics and excellent optical properties have been regarded as promising candidates in the research of cancer biomarkers detection and bioimaging. Therefore, the latest advances and the principal biosensing and imaging strategies based on the luminescent MOFs were discussed in this review. The effective synthesis methods of luminescent MOFs were emphasized firstly. Subsequently, the luminescent principle of MOFs has been summarized. Furthermore, the luminescent MOF-based sensing mechanisms have been highlighted to provide insights into the design of biosensors. The designability of LMOFs was suitable for different needs of biorecognition, detection, and imaging. Typical examples of luminescent MOF in the various cancer biomarkers detection and bioimaging were emphatically introduced. Finally, the future outlooks and challenges of luminescent MOF-based biosensing systems were proposed for clinical cancer diagnosis.

Functional Group-Assisted Fluorescence Sensing Platform for Nanomolar-Level Detection of an Antineoplastic Drug and a Neurotransmitter from Environmental Water and Human Biofluids

A fast, sensitive, selective, and biocompatible dual sensor of an antineoplastic medication (methotrexate) and a neurotransmitter (adrenaline) is still being searched by present-day scientists. To overcome this issue, we have designed a functionalized, robust, bio-friendly luminescent MOF for the sensitive, selective, and rapid monitoring of methotrexate and adrenaline. This probe is the first ever reported MOF-based fluorescence sensor of methotrexate and second only for adrenaline. This fluorescence probe has a very low limit of detection (LOD) of 0.34 and 11.2 nM for adrenaline and methotrexate, respectively. The sensor can detect both the targeted analytes rapidly within 5 s. It can also detect adrenaline and methotrexate from human blood serum and urine accurately and precisely. This reusable sensor is equally efficient in detecting methotrexate from environmental water specimens. Biocompatible, user-friendly, and inexpensive chitosan@MOF@cotton composites were fabricated for the detection of adrenaline and methotrexate from the nanomolar to the micromolar range by the naked eye under a fluorescence lamp. This probe displayed high reproducibility, precision, and accuracy in sensing methotrexate and adrenaline. Fluorescence resonance energy transfer (FRET) and the inner filter effect (IFE) are the possible mechanisms for adrenaline and methotrexate sensing, respectively. The possible mechanism was supported by using required instrumental techniques and theoretical simulations.

Bacterial Cellulose-Based MOF Hybrid as a Sensitive Switch Off-On Luminescent Sensor for the Selective Recognition of l-Histidine

In this study, a stable and luminescent UiO-66-NH2 (UN) and its derivative Cu2+@UN were prepared and utilized successfully as an Off-On luminescent sensing platform for effective, selective, as well as rapid (5 min) detection of l-Histidine (l-His). The UN reveals efficient quenching in the presence of Cu2+ ions through photoinduced electron transition (PET) mechanism as a dynamic quenching process (in the range of 0.01-1 mM) forming Cu2+@UN sensing platform. However, due to the remarkable affinity between l-His and Cu2+, the luminescence of Cu2+@UN is recovered in the presence of l-His indicating Turn-On behavior via a quencher detachment mechanism (QD). A good linear relationship between the l-His concentration and luminescence intensity was observed in the range of 0.01-40 μM (R2 = 0.9978) with a detection limit of 7 nM for l-His sensing. The suggested method was successfully utilized for l-His determination in real samples with good recoveries and satisfying consequences. Moreover, the result indicates that only l-His induces a significant luminescence restoration of Cu2+@UN and that the signal is significantly greater than that of the other amino acids. Also, the portable test paper based on bacterial cellulose (BC) as the Cu2+@UNBC sensing platform was developed to conveniently evaluate the effective detection of l-His.

Secondary metal doped cuprous-cyanoimidazole frameworks for triple-mode detection of dopamine

BACKGROUNDS

Metal-organic framework-based nanozymes enable several opportunities for designing novel analysis methods for the detection of pesticides, heavy metal ions, and biomolecules; however, practical applications are still limited by a complicated synthesis route, lower catalytic activity, and single detection mode. Dopamine (DA) is a crucial catecholamine substance in the human body that acts as a neurotransmitter regulating a variety of physiological functions of the central nervous system. Therefore, it is highly significant to explore simple nanozymes synthesis methods for constructing a multiple analysis system to detection DA.

RESULTS

Herein, we elaborately selected cobalt ions as the secondary metal doping in cuprous-cyanoimidazole frameworks (CuCo-CIFs) with a mass-production strategy. CuCo-CIFs possess intrinsic peroxidase-like activity that can convert hydrogen peroxide into various reactive oxygen species (i.e., 1O2, OH·, O2·-) and thereby oxidize colorless 3,3',5,5'-tetramethylbenzidine (TMB) and DA to blue oxTMB and orange polydopamine (PDA), respectively. The absorption of the detection system increases at 460 nm while decreases at 652 nm as the concentration of DA increases under near-neutral pH (6.1), resulting in a color transition from blue to orange. Consequently, an unprecedented triple-mode analysis system of DA monitored by naked eyes, ratiometric-absorption, and scanometric was constructed. The limit of detection for the ratiometric-absorption and scanometric mode can reach 20 nM and 28 nM, respectively. CuCo-CIFs were successfully used for the rapid and accurate detection of DA in practical samples.

SIGNIFICANCE

As a simple, low-cost, multi-mode colorimetric platform, this kind of nanozyme detection with peroxidase-like activity exhibits significant potential for the detection of DA. Our work not only expands the applications of MOFs in analytical fields but also addresses the general challenges faced by nanozyme-based colorimetric detection systems of DA. This work provides valuable insights for the rational application of nanozyme and the design of new analysis systems.

Metal-Organic Frameworks: Versatile Platforms for Biomedical Innovations

This review article explores the multiple applications and potential of metal-organic frameworks (MOFs) in the biomedical field. With their highly versatile and tunable properties, MOFs present many possibilities, including drug delivery, biomolecule recognition, biosensors, and immunotherapy. Their crystal structure allows precise tuning, with the ligand typology and metal geometry playing critical roles. MOFs' ability to encapsulate drugs and exhibit pH-triggered release makes them ideal candidates for precision medicine, including cancer treatment. They are also potential gene carriers for genetic disorders and have been used in biosensors and as contrast agents for magnetic resonance imaging. Despite the complexities encountered in modulating properties and interactions with biological systems, further research on MOFs is imperative. The primary focus of this review is to provide a comprehensive examination of MOFs in these applications, highlighting the current achievements and complexities encountered. Such efforts will uncover their untapped potential in creating innovative tools for biomedical applications, emphasizing the need to invest in the continued exploration of this promising field.

Metal-Organic Frameworks-Based Nanoplatforms for the Theranostic Applications of Neurological Diseases

Neurological diseases are the foremost cause of disability and the second leading cause of death worldwide. Owing to the special microenvironment of neural tissues and biological characteristics of neural cells, a considerable number of neurological disorders are currently incurable. In the past few years, the development of nanoplatforms based on metal-organic frameworks (MOFs) has broadened opportunities for offering sensitive diagnosis/monitoring and effective therapy of neurology-related diseases. In this article, the obstacles for neurotherapeutics, including delayed diagnosis and misdiagnosis, the existence of blood brain barrier (BBB), off-target treatment, irrepressible inflammatory storm/oxidative stress, and irreversible nerve cell death are summarized. Correspondingly, MOFs-based diagnostic/monitoring strategies such as neuroimaging and biosensors (electrochemistry, fluorometry, colorimetry, electrochemiluminescence, etc.) and MOFs-based therapeutic strategies including higher BBB permeability, targeting specific lesion sites, attenuation of neuroinflammation/oxidative stress as well as regeneration of nerve cells, are extensively highlighted for the management of neurological diseases. Finally, the challenges of the present research from perspective of clinical translation are discussed, hoping to facilitate interdisciplinary studies at the intersections between MOFs-based nanoplatforms and neurotheranostics.

Synthesis of 2D Metal-Organic Nanosheets (MONs) by Liquid Phase Exfoliation: Applications in Effective Delivery of Antiulcer Drugs and Selective Adsorption and Removal of Cationic Dyes

Nowadays, the fabrication of 2D metal-organic nanosheets (2D MONs) has entered the research arena fascinating researchers worldwide. However, a lack of efficient and facile methods has remained a bottleneck for the manufacturing of these 2D MONs. Herein, a 2D metal-organic framework (MOF), i.e., 2D Cu-MOF, was synthesized using a facile and convenient stirring method by using 4,4'-trimethylenedipyridine (TMDP) as an organic linker. The as-prepared MOF was characterized in detail and based on single crystal X-ray diffraction analysis, it was established that tangled layers in the 2D Cu-MOF are interconnected to produce thick strands. These tangled layers could be easily separated via ultrasonication-induced liquid phase exfoliation (UILPE) to give the 2D Cu-MON as illustrated through Tyndall light scattering and exhaustive microscopic exploration such as scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The application of this 2D Cu-MON was assessed in the field of drug delivery revealing exceptional drug loading for the drug lansoprazole (LPZ) by 2D Cu-MONs as well as drug release in the acidic and neutral medium demonstrating that the 2D Cu-MON is an excellent carrier for antiulcer drug delivery. For environmental protection, the application of 2D Cu-MON was also examined toward the removal of various cationic and anionic dyes with excellent selectivity toward cationic dye removal. The plausible mechanism for dye removal indicated the involvement of cation-π and π-π interactions, for the effective adsorption of cationic dyes as well as a increase in the surface area of 2D Cu-MON by UILPE. Remarkably, the high drug loading and dye removal are imputed to the increase in surface area by UILPE. In a nutshell, the developed 2D Cu-MON will prove to be beneficial for application in the field of drug delivery as well as for wastewater treatment.

Resultant inward imbalanced seeding force (RIISF)-induced concave gold nanostar (CAuNS) for non-enzymatic electrocatalytic detection of serotonin and Kynurenine in human serum

CTAC-based gold nanoseed-induced concave curvature evolution of surface boundary planes from concave gold nanocube (CAuNC) to concave gold nanostar (CAuNS) has been achieved by a novel synthetic methodology simply by controlling the extent of seed used and hence the generated 'Resultant Inward Imbalanced Seeding Force (RIISF)'. The resultant CAuNS shows an excellent enhancement in catalytic activity compared to CAuNC and other intermediates as a function of curvature-induced anisotropy. Detailed characterization evaluates the presence of an enhanced number of multiple defect sites, high energy facets, larger surface area, and roughened surface which ultimately results in an increased mechanical strain, coordinately unsaturation, and multifacet-oriented anisotropic behavior suitable for positive influence on the binding affinity of CAuNSs. While different crystalline and structural parameters improve their catalytic activity, the resultant uniform three-dimensional (3D) platform shows comparatively easy pliability and well absorptivity on the glassy carbon electrode surface for increased shelf life, a uniform structure to confine a large extent of stoichiometric systems, and long-term stability under ambient conditions for making this newly developed material a unique nonenzymatic scalable universal electrocatalytic platform. With the help of various electrochemical measurements, the ability of the platform has been established by performing highly specific and sensitive detection of the two most important human bio messengers: Serotonin (STN) and Kynurenine (KYN) which are metabolites of L-Tryptophan in the human body system. The present study mechanistically surveys the role of seed-induced RIISF-modulated anisotropy in controlling the catalytic activity which offers a universal 3D electrocatalytic sensing tenet by an electrocatalytic approach.

Polyindole-Derived Nitrogen-Doped Graphene Quantum Dots-Based Electrochemical Sensor for Dopamine Detection

The sensitive monitoring of dopamine levels in the human body is of utmost importance since its abnormal levels can cause a variety of medical and behavioral problems. In this regard, we report the synthesis of nitrogen-doped graphene quantum dots (N-GQDs) from polyindole (PIN) via a facile single-step hydrothermal synthetic strategy that can act as an efficient electrochemical catalyst for the detection of dopamine (DA). The average diameter of N-GQDs was ∼5.2 nm and showed a C/N atomic ratio of ∼2.75%. These N-GQDs exhibit a cyan fluorescence color under irradiation from a 365 nm lamp, while PIN has no characteristic PL. The presence of richly N-doped graphitic lattices in the N-GQDs possibly accounts for the improved catalytic activity of N-GQDs/GCE towards electrocatalytic DA detection. Under optimum conditions, this novel N-GQDs-modified electrode exhibits superior selectivity and sensitivity. Moreover, it could detect as low as 0.15 nM of DA with a linear range of 0.001-1000 µM. In addition, the outstanding sensing attributes of the detector were extended to the real samples as well. Overall, our findings evidence that N-GQDs-based DA electrochemical sensors can be synthesized from PIN precursor and could act as promising EC sensors in medical diagnostic applications.

Smartphone-Based Dopamine Detection by Fluorescent Supramolecular Sensor

Supramolecular recognition of dopamine by two quinoxaline cavitands was studied in solution by fluorescence titrations, ESI-MS and ROESY measurements. In addition, the tetraquinoxaline cavitand was dropped onto a siloxane-based polymeric solid support, obtaining a sensor able to detect dopamine in a linear range of concentrations 10 Mm-100 pM, with a detection limit of 1 pM, much lower than the normal concentration values in the common human fluids (plasma, urine and saliva), by using a simple smartphone as detector. This sensor shows also good selectivity for dopamine respect to the other common analytes contained in a saliva sample and can be reused after acid-base cycles, paving the way for the realization of real practical sensor for human dopamine detection.

Novel Amperometric Biosensor Based on Tyrosinase/Chitosan Nanoparticles for Sensitive and Interference-Free Detection of Total Catecholamine

The regulation of nervous and cardiovascular systems and some brain-related behaviors, such as stress, panic, anxiety, and depression, are strictly dependent on the levels of the main catecholamines of clinical interest, dopamine (DA), epinephrine (EP), and norepinephrine (NEP). Therefore, there is an urgent need for a reliable sensing device able to accurately monitor them in biological fluids for early diagnosis of the diseases related to their abnormal levels. In this paper, we present the first tyrosinase (Tyr)-based biosensor based on chitosan nanoparticles (ChitNPs) for total catecholamine (CA) detection in human urine samples. ChitNPs were synthetized according to an ionic gelation process and successively characterized by SEM and EDX techniques. The screen-printed graphene electrode was prepared by a two-step drop-casting method of: (i) ChitNPS; and (ii) Tyr enzyme. Optimization of the electrochemical platform was performed in terms of the loading method of Tyr on ChitNPs (nanoprecipitation and layer-by-layer), enzyme concentration, and enzyme immobilization with and without 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC) and N-hydroxysuccinimide (NHS) as cross-linking agents. The Tyr/EDC-NHS/ChitNPs nanocomposite showed good conductivity and biocompatibility with Tyr enzyme, as evidenced by its high biocatalytic activity toward the oxidation of DA, EP, and NEP to the relative o-quinone derivatives electrochemically reduced at the modified electrode. The resulting Tyr/EDC-NHS/ChitNPs-based biosensor performs interference-free total catecholamine detection, expressed as a DA concentration, with a very low LOD of 0.17 μM, an excellent sensitivity of 0.583 μA μM⁻¹ cm⁻², good stability, and a fast response time (3 s). The performance of the biosensor was successively assessed in human urine samples, showing satisfactory results and, thus, demonstrating the feasibility of the proposed biosensor for analyzing total CA in physiological samples.

Efficient and ecofriendly cellulose-supported MIL-100(Fe) for wastewater treatment

Due to their efficiency and accessibility, benzodiazepines are widely manufactured and consumed and as a result, they can be found in almost all wastewaters. Among the materials that were used for the removal of drug contaminants from wastewater, metal–organic frameworks (MOFs) demonstrated unique properties. In this regard, a composite of carboxymethylated cellulose (CMC) and MIL-100(Fe) was prepared via a sonochemical method and used for the removal of lorazepam from wastewater in various conditions. A maximum capacity of 811 mg g⁻¹ was achieved which is considered a great improvement compared to bare MIL-100(Fe) (150 mg g⁻¹) and other previously reported adsorbents. It is noteworthy that the efficiency of the adsorbent did not reduce in the second and third cycle of adsorption/desorption. Moreover, the effect of pH, dose of adsorbent, isotherms and the kinetics of this process were studied using UV-vis and HPLC analyses and the adsorbents were fully characterized with PXRD, TGA, BET, SEM, ZP and FT-IR techniques. Our findings demonstrate that this composite is clearly a green, recyclable and efficient adsorbent for the removal of lorazepam and opens our way to further potential applications in the removal of other active pharmaceutical ingredients.

In this manuscript, the successful utilization of an improved cellulose-supported MOF, MIL-100(Fe)@CMC, for the adsorption of lorazepam is reported.

Molecular Engineered Carbon-Based Sensor for Ultrafast and Specific Detection of Neurotransmitters

In the quest for designing affordable diagnostic devices with high performance, precisely functionalized carbon-based materials with high accuracy and selectivity are required. Every material has its own unique ability to interact with the analyte, and its performance can be enhanced by probing the interaction mechanism. Herein, p-aminophenol (PAP)-functionalized reduced graphene oxide (rGO) nanoscale material is developed by a one-step synthetic route as an all-organic-based sensor. As the PAP molecules are precisely covalently interacted with the rGO at the basal plane and form a wrinkled-paper-like structure, the functionalized material exhibits an outstanding sensing ability (7.5 nM neurotransmitter dopamine (DA) at a wide linear range, 0.01-100 μM) with fast electrical transduction (<3 s) and good recyclability (∼10 cycles) in a real sample. Combining various analytical and density functional theory (DFT) calculation methods, physicochemical properties and the interaction mechanism of analyte-materials transduction are discussed exclusively. Besides, the potential application of the well-dispersed rGO-PAP gravure ink in flexible-printed electronics fields is explored. This study not only provides new insights into the surface/interface chemistry and working principle of this unique anchoring of PAP on rGO but also offers a new pathway for developing other forms of metal-free/organic functionalized biosensors with high efficiency.

Uranyl phosphonates: crystalline materials and nanosheets for temperature sensing

Ultrathin nanosheets of luminescent metal-organic frameworks or coordination polymers have been widely used for sensing ions, solvents and biomolecules but, as far as we are aware, not yet used for temperature sensing. Herein we report two luminescent uranyl phosphonates based on 2-(phosphonomethyl)benzoic acid (2-pmbH₃), namely (UO₂)(2-pmbH₂)₂ (1) and (H₃O)[(UO₂)₂(2-pmb)(2-pmbH)] (2). The former has a supramolecular layer structure, composed of chains of corner-sharing {UO₆} octahedra and {PO₃C} tetrahedra which are connected by hydrogen bonds between phosphonate and carboxylic groups. Compound 2 possesses a unique 2D anionic framework structure, where the inorganic uranyl phosphonate chains made up of {UO₇} and {PO₃C} polyhedra are cross-linked by 2-pmb^3- ligands. The carboxylic groups of 2-pmbH^2- ligands are pendant on the two sides of the layers and form hydrogen bonds between the layers. Both compounds can be exfoliated in acetone via a top-down freeze-thaw method, resulting in nanosheets of two-layer thickness. Interestingly, the photoluminescence (PL) of 1 and 2 is highly temperature sensitive. Variable temperature PL studies revealed that compounds 1 and 2 can be used as thermometers in the temperature ranges 120-300 K and 100-280 K, respectively. By doping the nanosheets into polymer matrix, 1-ns@PMMA and 2-ns@PMMA were prepared. The PL intensity of 1-ns@PMMA is insensitive to temperature, unlike that of the bulk sample. While 2-ns@PMMA exhibits similar temperature-dependent luminescence behaviour to its bulk counterpart, thereby enabling its potential application as a thermometer in the temperature range 100-280 K.

Multifunctional nanoscale lanthanide metal-organic framework based ratiometric fluorescence paper microchip for visual dopamine assay

Dopamine (DA) plays a significant role in the human body and cerebral nervous system, and the accurate and rapid assay of DA is essential for the diagnosis of related diseases. Herein, we proposed a turn-on ratiometric fluorescent DA assay strategy by integrating a specific DA-resorcinol chemical reaction with a multifunctional lanthanide metal-organic framework (Ln-MOF). First, Eu-BTC (1,3,5-benzenetricarboxylic acid) was synthesized and further modified to obtain Cu@Eu-BTC, which simultaneously plays multiple roles such as fluorescence internal standard, nanoreactor, cooperative catalysis effect and color shift enhancement. The Cu@Eu-BTC dispersion-based method exhibits ultra-sensitive (limit of detection, LOD is 0.01 μM) and wide-range linear response (0.04-30 μM) to DA in real serum. More importantly, it has excellent selectivity for DA, even in the presence of epinephrine and norepinephrine analogs. Thus, this method realizes the accurate and precise quantification of DA in serum (recoveries: 98.1%-110.1%, relative standard deviation RSD < 4.6%). Next, Cu@Eu-BTC was prepared into paper microchip, which has good storage stability (RSD < 3.5%, n = 3) in four weeks and achieves point-of-care visual DA assay coupled with smartphone-assisted portable detection device. The MOF paper microchip-based method shows low sample consumption (30 μL), high accuracy and precision for the quantification of DA in serum (recovery of 92.9%-106.2%, RSD < 5.3%), and gets the same assay results as the MOF dispersion-based method (relative error ≤ 6.83%). To our knowledge, this is the first time to propose the catalytic fluorescence turn-on detection strategy of DA based on a MOF paper microchip.

Recent Advances in Immunosafety and Nanoinformatics of Two-Dimensional Materials Applied to Nano-imaging

Two-dimensional (2D) materials have emerged as an important class of nanomaterials for technological innovation due to their remarkable physicochemical properties, including sheet-like morphology and minimal thickness, high surface area, tuneable chemical composition, and surface functionalization. These materials are being proposed for new applications in energy, health, and the environment; these are all strategic society sectors toward sustainable development. Specifically, 2D materials for nano-imaging have shown exciting opportunities in in vitro and in vivo models, providing novel molecular imaging techniques such as computed tomography, magnetic resonance imaging, fluorescence and luminescence optical imaging and others. Therefore, given the growing interest in 2D materials, it is mandatory to evaluate their impact on the immune system in a broader sense, because it is responsible for detecting and eliminating foreign agents in living organisms. This mini-review presents an overview on the frontier of research involving 2D materials applications, nano-imaging and their immunosafety aspects. Finally, we highlight the importance of nanoinformatics approaches and computational modeling for a deeper understanding of the links between nanomaterial physicochemical properties and biological responses (immunotoxicity/biocompatibility) towards enabling immunosafety-by-design 2D materials.

A Multifunctional Dysprosium-Carboxylato 2D Metall-Organic Framework

We report the microwave assisted synthesis of a bidimensional (2D) MOF of formula [Dy(MeCOO)(PhCOO)₂ ]_n (1) and its magnetically diluted analogue [La_0.9 Dy_0.1 (MeCOO)(PhCOO)₂ ] (1 d). 1 is a 2D material with single-ion-magnet (SIM) behaviour and 1 d is a multifunctional, magnetic and luminescent 2D material. 1 can be exfoliated into stable nanosheets by sonication.