Novel Approach toward Electrofluidic Substrates Utilizing Textile-Based Braided Structure

Novel 3D textile structures and geometries for electrofluidics

The integration of microfluidics with electric field control, commonly referred to as electrofluidics, has led to new opportunities for biomedical analysis. The requirement for closed microcapillary channels in microfluidics, typically formed via complex microlithographic fabrication approaches, limits the direct accessibility to the separation processes during conventional electrofluidic devices. Textile structures provide an alternative and low-cost approach to overcome these limitations via providing open and surface-accessible capillary channels. Herein, we investigate the potential of different 3D textile structures for electrofluidics. In this study, 12 polyester yarns were braided around nylon monofilament cores of different diameters to produce functional 3D core-shell textile structures. Capillary electrophoresis performances of these 3D core-shell textile structures both before and after removing the nylon core were evaluated in terms of mobility and bandwidth of a fluorescence marker compound. It was shown that the fibre arrangement and density govern the inherent capillary formation within these textile structures which also impacts upon the solute analyte mobility and separation bandwidth during electrophoretic studies. Core-shell textile structures with a 0.47 mm nylon core exhibited the highest fluorescein mobility and presented a narrower separation bandwidth. This optimal textile structure was readily converted to different geometries via a simple heat-setting of the central nylon core. This approach can be used to fabricate an array of miniaturized devices that possess many of the basic functionalities required in electrofluidics while maintaining open surface access that is otherwise impractical in classical approaches.

Electrofluidic control for textile-based cell culture: Identification of appropriate conditions required to integrate cell culture with electrofluidics

Electric field-driven microfluidics, known as electrofluidics, is a novel attractive analytical tool when it is integrated with low-cost textile substrate. Textile-based electrofluidics, primarily explored on yarn substrates, is in its early stages, with few studies on 3D structures. Further, textile structures have rarely been used in cellular analysis as a low-cost alternative. Herein, we investigated novel 3D textile structures and develop optimal electrophoretic designs and conditions that are favourable for direct 3D cell culture integration, developing an integrated cell culture textile-based electrofluidic platform that was optimised to balance electrokinetic performance and cell viability requirements. Significantly, there were contrasting electrolyte compositional conditions that were required to satisfy cell viability and electrophoretic mobility requiring the development of and electrolyte that satisfied the minimum requirements of both these components within the one platform. Human dermal fibroblast cell cultures were successfully integrated with gelatine methacryloyl (GelMA) hydrogel-coated electrofluidic platform and studied under different electric fields using 5 mM TRIS/HEPES/300 mM glucose. Higher analyte mobility was observed on 2.5% GelMA-coated textile which also facilitated excellent cell attachment, viability and proliferation. Cell viability also increased by decreasing the magnitude and time duration of applied electric field with good cell viability at field of up to 20 V cm-1.

Tuning the electrophoretic separations on a surface-accessible and flexible fibre-based microfluidic devices

Electrophoresis on textile fiber substrates provides a unique surface-accessible platform for the movement, separation and concentration of charged analytes. The method employs the inherently inbuilt capillary channels existing within textile structures, which can support electroosmotic and electrophoretic transport processes upon applying an electric field. Unlike confined microchannels in classical chip-based electrofluidic devices, the capillaries formed by the roughly oriented fibers within textile substrates can impact the reproducibility of the separation process. Here, we report an approach for precise experimental conditions affecting the electrophoretic separation of two tracer solutes, fluorescein (FL) and rhodamine B (Rh-B) on textile-based substrates. A Box-Behnken response surface design methodology has been used to optimise the experimental conditions and predict the separation resolution of a solute mixture using polyester braided structures. The magnitude of the electric field, sample concentration and sample volume are of primary importance to the separation performance of the electrophoretic devices. Here, we use a statistical approach to optimise these parameters to achieve rapid and efficient separation. While a higher potential was shown to be required to separate solute mixtures of increasing concentration and sample volume, this was counteracted by a reduced separation efficiency due to joule heating, which caused electrolyte evaporation on the unenclosed textile structure at electric fields above 175 V cm^-1. Using the approach presented here, optimal experimental conditions can be predicted to limit joule heating and attain effective separation resolution without compromising the analysis time on simple and low-cost textile substrates.

A thread-based electrofluidic platform for direct transfer, separation, and pre-concentration of materials from sample swabs

A new method and platform has been developed for direct transfer, electrophoretic separation, and pre-concentration of swabbed samples using the principles of thread-based electrofluidics. A direct electrokinetic injection has been observed for a variety of analytes ranging from small molecules to proteins. The effect of physicochemical interactions of the analyte with the swab and the thread on the transfer efficiency has been studied by exploring different swab and thread combinations. For fluorescein, using a polyurethane swab, 98% and 94% transfer efficiencies were observed on mercerised cotton and nylon thread, while only 80% transfer efficiency was observed on polyester thread, respectively. A 97% transfer of fluorescein was observed on the nylon thread when a flocked nylon swab was used, while only 47% transfer was observed when a cotton swab was used. A successful transfer has been observed for both liquid and dry samples from either pre-wetted or dry swabs in both the presence and absence of any surrounding electrolytes. The platform has been further adapted for multiplexed analysis, where a sample from a single swab was transferred onto two parallel thread systems with ca. 50% distribution between them. The method has been validated for transfer, separation, and pre-concentration of DNA from blood. It has also been successfully used to directly analyse dried blood samples using a commercial sampling device, Neoteryx Mitra.

Thread-based isotachophoresis coupled with desorption electrospray ionization mass spectrometry for clean-up, preconcentration, and determination of alkaloids in biological fluids

A thread-based isotachophoresis method coupled with desorption electrospray ionization mass spectrometry (TB-ITP-DESI-MS) was developed and applied for clean-up, preconcentration, and determination of alkaloids in biological fluids. This simple approach enables the focusing and rapid analysis of analytes of interest in complex matrices that are otherwise challenging using direct ambient mass spectrometry. The TB-ITP platform components were rapidly and reproducibly fabricated at low-cost using 3D printing. A single string of nylon 6 thread was used as the electrophoresis substrate and a cotton knot, tied to the nylon thread, was used as the trapping zone of the ITP focused model analytes (coptisine, berberine and palmatine). The trapping efficiency was evaluated upon different commercially available threads with different chemical properties and cotton was selected as the best material due to its highest trapping efficiency and subsequent DESI-MS ionization efficiency. Up to 11.6-fold increase in signal to noise ratio (S/N) was obtained using the proposed method compared to direct DESI-MS detection, due to the reduced matrix interference and focusing. The results demonstrated that the TB-ITP-DESI-MS approach is a viable solution for the analysis of complicated biological fluid samples.

Nanomaterial-assisted thread-based isotachophoresis with on-thread solute trapping

This research describes a nanomaterial-assisted TB-ITP setup for the clean-up, preconcentration, and trapping of alkaloids in biological fluids, followed by their on-thread DESI-MS determination.

Microfluidic devices based on textile threads for analytical applications: state of the art and prospects

Microfluidic devices based on textile threads have interesting advantages when compared to systems made with traditional materials, such as polymers and inorganic substrates (especially silicon and glass). One of these significant advantages is the device fabrication process, made more cheap and simple, with little or no microfabrication apparatus. This review describes the fundamentals, applications, challenges, and prospects of microfluidic devices fabricated with textile threads. A wide range of applications is discussed, integrated with several analysis methods, such as electrochemical, colorimetric, electrophoretic, chromatographic, and fluorescence. Additionally, the integration of these devices with different substrates (e.g., 3D printed components or fabrics), other devices (e.g., smartphones), and microelectronics is described. These combinations have allowed the construction of fully portable devices and consequently the development of point-of-care and wearable analytical systems.

Wireless bipolar electrode-based textile electrofluidics: towards novel micro-total-analysis systems

Point of care testing using micro-total-analysis systems (μTAS) is critical to emergent healthcare devices with rapid and robust responses. However, two major barriers to the success of this approach are the prohibitive cost of microchip fabrication and poor sensitivity due to small sample volumes in a microfluidic format. Here, we aimed to replace the complex microchip format with a low-cost textile substrate with inherently built microchannels using the fibers' spaces. Secondly, by integrating this textile-based microfluidics with electrophoresis and wireless bipolar electrochemistry, we can significantly improve solute detection by focusing and concentrating the analytes of interest. Herein, we demonstrated that an in situ metal electrode simply inserted inside the textile-based electrophoretic system can act as a wireless bipolar electrode (BPE) that generates localized electric field and pH gradients adjacent to the BPE and extended along the length of the textile construct. As a result, charged analytes were not only separated electrophoretically but also focused where their electrophoretic migration and counter flow (EOF) balances due to redox reactions proceeding at the BPE edges. The developed wireless redox focusing technique on textile constructs was shown to achieve a 242-fold enrichment of anionically charged solute over an extended time of 3000 s. These findings suggest a simple route that achieves separation and analyte focusing on low-cost surface-accessible inverted substrates, which is far simpler than the more complex ITP on conventional closed and inaccessible capillary channels.

Low-cost and open-source strategies for chemical separations

In recent years, a trend toward utilizing open access resources for laboratory research has begun. Open-source design strategies for scientific hardware rely upon the use of widely available parts, especially those that can be directly printed using additive manufacturing techniques and electronic components that can be connected to low-cost microcontrollers. Open-source software eliminates the need for expensive commercial licenses and provides the opportunity to design programs for specific needs. In this review, the impact of the "open-source movement" within the field of chemical separations is described, primarily through a comprehensive look at research in this area over the past five years. Topics that are covered include general laboratory equipment, sample preparation techniques, separations-based analysis, detection strategies, electronic system control, and software for data processing. Remaining hurdles and possible opportunities for further adoption of open-source approaches in the context of these separations-related topics are also discussed.