Amplifying and Leveraging Generated Force Upon Heating and Cooling in SMA Knitted Actuators

Shape Memory Alloy-Based Reactive Tubular (SMART) Brake for Compact and Energy-Efficient Wearable Robot Design

Soft wearable robots have been gaining increasing popularity for enhancing human physical abilities and assisting people who have physical limitations. These robots typically use tendon-driven mechanisms (TDMs) to enable remote actuation to provide better usability with compact design. TDMs comprise an actuator, an end-effector, and a transmission system by using cables or tendons to transfer forces from the actuator to the end-effector. Tendons are typically routed by frictionless guiding tubes to minimize force losses, variations in the force direction, and the volume. To make soft wearable robots even smaller, brakes need to be compacted because brakes are irreplaceable to ensure safety and energy efficiency. This study presents a shape memory alloy-based reactive tubular (SMART) brake for designing a compact and portable TDM-based device. The SMART brake actively adjusts the friction force between the brake and tendon, making it easy to achieve the desired friction state, ranging from low-friction states for free movement to high-friction states for effective braking. The brake is designed in a tubular shape, serving multifunctions as both a brake and a guiding tube. The brake's performance and theoretical model were validated through experiments and demonstrated by two wearable devices. The brake could hold a significant brake force of 19.37 N/11 mm while weighing only 0.3 g. These findings have major implications for the future development of TDM-based devices and soft wearable robots, paving the way for enhanced system portability, safety, and energy efficiency.

Fabric muscle with a cooling acceleration structure for upper limb assistance soft exosuits

Soft exosuits used for supporting human muscle strength must be lightweight and wearable. Shape memory alloy (SMA) spring-based fabric muscles (SFM) are light and flexible, making them suitable for soft and shape-conformable exosuits. However, SFMs have a slow actuation speed owing to the slow cooling rate of the SMA spring. This paper proposes a forced air-cooling fan-integrated fabric muscle (FCFM) that improves the cooling rate by arranging a thin-diameter SMA spring bundle with a high surface-area-to-volume ratio inside a breathable fabric with integrated fans. The relaxation time of an FCFM weighing 30 g and containing a 2.6 g SMA spring bundle, which contains 200 thin springs, was reduced by over 70.2% via forced-air cooling using the integrated fans. A 4 kg weight, which is 1530 times the mass of the SMA spring bundle, was hung from the FCFM and was repeatedly actuated in ten-second cycles. An upper limb assistive soft exosuit with FCFMs was fabricated and worn on a mannequin holding a dumbbell, and the arm extension time after flexion was improved by 4.5 times. Additionally, the assistive performance of the exosuits for repetitive tasks in specific scenarios was evaluated, and the strong potential of the proposed FCFM for soft exosuits was verified.