Photoinduced Deposition of Platinum from (Bu4N)2[Pt(NO3)6] for a Low Pt-Loading Pt/TiO2 Hydrogen Photogeneration Catalyst

(Me4N)2[Pt(CO3)2(OH)2]: The Isolated PtIVO6 Carbonato-Complex

The first fully inorganic Pt(IV) carbonato-complex trans-[Pt(CO3)2(OH)2]2- with a {PtO6} coordination sphere was isolated as the (Me4N)2[Pt(CO3)2(OH)2] (1) salt. The compound 1 was characterized using single-crystal and powder X-ray diffraction, Raman spectroscopy, infrared spectroscopy (FTIR), electrospray ionization mass spectrometry (ESI-MS), nuclear magnetic resonance spectroscopy (NMR), and thermogravimetric analysis (TG). Density functional theory (DFT) calculations were also performed to analyze the spectral features of the complex. 1 crystallizes in the triclinic system (P-1) with a Z of 1. The trans-[Pt(CO3)2(OH)2]2- anion has axial hydroxo ligands and κ2-CO3 ligands, which form an equatorial plane. This anionic complex exhibits notable stability in aqueous solutions, while the axial hydroxo ligand can be readily modified, as exemplified by the acylation of the trans-[Pt(CO3)2(OH)2]2- into trans-[Pt(CO3)2(OAc)2]2- anion. Furthermore, it has been shown that rigid and glittering platinum coatings can be electrochemically deposited from an aqueous solution of 1 without the addition of surfactants.

Photochemistry of (n-Bu4N)2[Pt(NO3)6] in acetonitrile

Photochemistry of the (n-Bu4N)2[Pt(NO3)6] complex in acetonitrile was studied by means of stationary photolysis and nanosecond laser flash photolysis. The primary photochemical process was found to be an intramolecular electron transfer followed by an escape of an •NO3 radical to the solution bulk. The spectra of two successive Pt(III) intermediates were detected in the microsecond time domain, and their spectral and kinetic characteristics were determined. These intermediates were identified as PtIII(NO3)52- and PtIII(NO3)4- complexes. Disproportionation of Pt(III) species resulted in formation of final Pt(II) products.

Photocatalysts Based on Graphite-like Carbon Nitride with a Low Content of Rhodium and Palladium for Hydrogen Production under Visible Light

In this study, we proposed photocatalysts based on graphite-like carbon nitride with a low content (0.01-0.5 wt.%) of noble metals (Pd, Rh) for hydrogen evolution under visible light irradiation. As precursors of rhodium and palladium, labile aqua and nitrato complexes [Rh2(H2O)8(μ-OH)2](NO3)4∙4H2O and (Et4N)2[Pd(NO3)4], respectively, were proposed. To obtain metallic particles, reduction was carried out in H2 at 400 °C. The synthesized photocatalysts were studied using X-ray diffraction, X-ray photoelectron spectroscopy, UV-Vis diffuse reflectance spectroscopy and high-resolution transmission electron microscopy. The activity of the photocatalysts was tested in the hydrogen evolution from aqueous and aqueous alkaline solutions of TEOA under visible light with a wavelength of 428 nm. It was shown that the activity for the 0.01-0.5% Rh/g-C3N4 series is higher than in the case of the 0.01-0.5% Pd/g-C3N4 photocatalysts. The 0.5% Rh/g-C3N4 sample showed the highest activity per gram of catalyst, equal to 3.9 mmol gcat-1 h-1, whereas the most efficient use of the metal particles was found over the 0.1% Rh/g-C3N4 photocatalyst, with the activity of 2.4 mol per gram of Rh per hour. The data obtained are of interest and can serve for further research in the field of photocatalytic hydrogen evolution using noble metals as cocatalysts.

Zn Modification of Pd/TiO2/Ti Catalyst for CO Oxidation

The main goal of this study was to modify the activity of Pd/TiO₂/Ti catalyst in the reaction of CO oxidation by the addition of Zn. Plasma electrolytic oxidation (PEO) of Ti wire was conducted to produce a uniform porous layer of TiO₂. A mixture of Pd and Zn was then introduced by means of adsorption. After reduction treatment, the activity of the samples was examined by oxidation of 5% CO in a temperature range from 80-350 °C. Model catalysts with sufficient amounts of the metals for physico-chemical investigation were prepared to further investigate the reaction between Pd and Zn during CO oxidation. The structures and compositions of the samples were investigated using scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS), time-of-flight secondary ion mass spectrometry (TOF-SIMS), inductively coupled plasma mass spectrometry (ICP-MS), Fourier transform infrared (FTIR), and X-ray diffraction (XRD). Modification of Pd/TiO₂/Ti catalyst by Zn with a Pd:Zn atomic ratio of 2:1 decreased the temperature of complete CO oxidation from 220 °C for Pd/TiO₂/Ti to 180 °C for Pd-Zn/TiO₂/Ti. The temperature of 50% CO conversion on Pd-Zn(2:1)/TiO₂/Ti was around 55 °C lower than in the reaction on monometallic Pd catalyst. The addition of Zn to the Pd catalyst lowered the binding energy of CO on the surface and improved the dissociative adsorption of oxygen, facilitating the oxidation of CO. FTIR showed that the bridging form of adsorbed CO is preferred on bimetallic systems. Analysis of the surface compositions of the samples (SEM-EDS, TOF-SIMS) showed higher amounts of oxygen on the bimetallic systems.

Comprehensive Review on g-C3N4-Based Photocatalysts for the Photocatalytic Hydrogen Production under Visible Light

Currently, the synthesis of active photocatalysts for the evolution of hydrogen, including photocatalysts based on graphite-like carbon nitride, is an acute issue. In this review, a comprehensive analysis of the state-of-the-art studies of graphic carbon nitride as a photocatalyst for hydrogen production under visible light is presented. In this review, various approaches to the synthesis of photocatalysts based on g-C₃N₄ reported in the literature were considered, including various methods for modifying and improving the structural and photocatalytic properties of this material. A thorough analysis of the literature has shown that the most commonly used methods for improving g-C₃N₄ properties are alterations of textural characteristics by introducing templates, pore formers or pre-treatment method, doping with heteroatoms, modification with metals, and the creation of composite photocatalysts. Next, the authors considered their own detailed study on the synthesis of graphitic carbon nitride with different pre-treatments and respective photocatalysts that demonstrate high efficiency and stability in photocatalytic production of hydrogen. Particular attention was paid to describing the effect of the state of the platinum cocatalyst on the activity of the resulting photocatalyst. The decisive factors leading to the creation of active materials were discussed.

Photoelectrochemical Biosensor for Histone Deacetylase Sirt1 Detection Based on Polyaspartic Acid-Engaged and Triggered Redox Cycling Amplification and Enhanced Photoactivity of BiVO4 by Gold Nanoparticles and SnS2

A photoelectrochemical (PEC) biosensor was established for histone deacetylase Sirt1 detection based on the polyaspartic acid (PASP)-mediated redox cycling amplification and Sirt1 catalysis deacetylation-triggered recognition of the deacetylated substrate peptide, using PASP as the recognition reagent. After BiVO₄ was composited with gold nanoparticles and SnS₂, the photoactivity of the composite was greatly enhanced due to the matched energy band structure. Under the catalysis of Sirt1 enzyme, the acetylated substrate peptide was deacetylated to obtain a positive peptide, which was recognized by negative PASP. In addition to the recognition function, PASP also played other triple roles. First, PASP interacted with the positive peptide to form a double-stranded structure, which led to the electrode interface changing from irregular to regular, resulting in an improved PEC response. Second, PASP was involved into redox cycle amplification due to its reduction to dehydroascorbic acid. Further, it was used for repeated preparation of ascorbic acid to provide electron donors. This process enhanced the PEC response. Third, based on the matched energy band with BiVO₄, PASP effectively improved the photoactivity of BiVO₄. With multiplex signal amplification, the PEC biosensor showed a wide linear range (1.83-1830 pM) and high detection sensitivity with a low detection limit of 0.732 pM (S/N = 3). The applicability of this method was evaluated by studying the effects of a known inhibitor of nicotinamide and the heavy metal ions of Cd²⁺ and Pb²⁺ on Sirt1 enzyme activity, and the results showed that this method not only provided a new platform for screening Sirt1 enzyme inhibitors but also provided new biomarkers for evaluating the ecotoxicological effects of environmental pollutants.

Property-governed performance of platinum-modified titania photocatalysts

Titania is probably the most widely investigated semiconductor photocatalyst because of various advantages, such as high activity, thermal and chemical stability, low price, abundance, and negligible toxicity. However, pristine titania is also characterized by charge carriers’ recombination, and thus lower quantum yields of photocatalytic reactions than theoretical 100%. Moreover, its wide bandgap, despite being recommended for excellent redox properties, means also inactivity under visible part of solar radiation. Accordingly, titania has been surface modified, doped and coupled with various elements/compounds. For example, platinum deposited on the surface of titania has shown to improve both UV activity and the performance under vis. Although the studies on titania modification with platinum started almost half a century ago, and huge number of papers have been published up to now, it is unclear which properties are the most crucial and recommended to obtain highly efficient photocatalyst. In the literature, the opposite findings could be found on the property-governed activities that could result from huge differences in the reaction systems, and also examined photocatalysts. Considering the platinum properties, its content, the size of nanoparticles and the oxidation state, must be examined. Obviously, the characteristics of titania also influence the resultant properties of deposited platinum, and thus the overall photocatalytic performance. Although so many reports on Pt/TiO₂ have been published, it is hardly possible to give indispensable advice on the recommended properties. However, it might be concluded that usually fine platinum NPs uniformly deposited on the titania surface result in high photocatalytic activity, and thus in the low optimal content of necessary platinum. Moreover, the aggregation of titania particles might also help in the lowering the necessary platinum amount (even to 0.2 wt%) due to the interparticle electron transfer mechanism between titania particles in one aggregate. In respect of platinum state, it is thought that it is highly substrate-specific case, and thus either positively charged or zero valent platinum is the most recommended. It might be concluded that despite huge number of papers published on platinum-modified titania, there is still a lack of comprehensive study showing the direct correlation between only one property and the resultant photocatalytic activity.

Coordination of Pt(IV) by {P8W48} Macrocyclic Inorganic Cavitand: Structural, Solution, and Electrochemical Studies

Hydrothermal reaction of a macrocyclic inorganic POM cavitand Li₁₇(NH₄)₂₁H₂[P₈W₄₈O₁₈₄] with [Pt(H₂O)₂(OH)₄] results in coordination of up to six {Pt(H₂O)_x(OH)_4-x} fragments to the internal surface of the polyoxoanion. The product was isolated as K₂₂(NH₄)₉H₃[{Pt(OH)₃(H₂O)}₆P₈W₄₈O₁₈₄]·79H₂O (1) and characterized by multiple techniques in the solid state (SCXRD, XRPD, XPS, FTIR, and TGA) and in solution (NMR, ESI-MS, and HPLC-ICP-AES). Electrochemical properties were studied both in solution and as components of the paste electrode. The complex shows electrocatalytic activity in water oxidation.

Sulfuric Acid Solutions of [Pt(OH)4(H2O)2]: A Platinum Speciation Survey and Hydrated Pt(IV) Oxide Formation for Practical Use

The systematic study of the platinum speciation in sulfuric acid solutions of platinum (IV) hydroxide {[Pt(OH)₄(H₂O)₂], HHPA} was performed with the use of a combination of methods. Depending on the prevailing Pt form, the three regions of H₂SO₄ concentration were marked: (1) up to 3 M H₂SO₄ forms unstable solutions gradually generating the PtO₂·xH₂O particles; (2) 4-12 M H₂SO₄, where the series of mononuclear aqua-sulfato complexes ([Pt(SO₄)_n(H₂O)_6-n]^4-2n, where n = 0···4) dominate; and (3) 12 M and above, where, along with [Pt(SO₄)_n(H₂O)_6-n]^4-2n species, the polynuclear Pt(IV) species and complexes with a bidentate coordination mode of the sulfato ligand are formed. For the first time, the salts of the aqua-hydroxo Pt(IV) cation [Pt(OH)₂(H₂O)₄]SO₄ (triclinic and monoclinic phases) were isolated and studied with a combination of methods, including the single-crystal X-ray diffraction. The formation of PtO₂·xH₂O particles in sulfuric acid solutions (1-3 M) of HHPA and their spectral characteristics and morphology were studied. The deposition of PtO₂·xH₂O was highlighted as a convenient method to prepare various Pt-containing heterogeneous catalysts. This possibility was illustrated by the preparation of Pt/g-C₃N₄ catalysts, which show an excellent performance in catalytic H₂ generation under visible light irradiation with a quantum efficiency up to 5% and a rate of H₂ evolution up to 6.2 mol·h^-1 per gram of loaded platinum.

Constructing g-C3N4/Cd1−xZnxS-Based Heterostructures for Efficient Hydrogen Production under Visible Light

Two types of photocatalysts, 1%Pt/Cd1−xZnxS/g-C3N4 (x = 0.2–0.3) and Cd1−xZnxS/1%Pt/g-C3N4 (x = 0.2–0.3), were synthesized by varying the deposition order of platinum, and a solid solution of cadmium and zinc sulfides onto the surface of g-C3N4. The characterization of photocatalysts showed that, for 1%Pt/Cd1−xZnxS/g-C3N4, small platinum particles were deposited onto a solid solution of cadmium and zinc sulfides; in the case of Cd1−xZnxS/1%Pt/g-C3N4, enlarged platinum clusters were located on the surface of graphitic carbon nitride. Based on the structure of the photocatalysts, we assumed that, in the first case, type II heterojunctions and, in the latter case, S-scheme heterojunctions were realized. The activity of the synthesized samples was tested in hydrogen evolution from triethanolamine (TEOA) basic solution under visible light (λ = 450 nm). A remarkable increase in hydrogen evolution rate compared to single-phase platinized 1%Pt/Cd1−xZnxS photocatalysts was observed only in the case of ternary photocatalysts with platinum located on the g-C3N4 surface, Cd1−xZnxS/1%Pt/g-C3N4. Thus, we proved using kinetic experiments and characterization techniques that, for composite photocatalysts based on Cd1−xZnxS and g-C3N4, the formation of the S-scheme mechanism is more favorable than that for type II heterojunction. The highest activity, 2.5 mmol H2 g−1 h−1, with an apparent quantum efficiency equal to 6.0% at a wavelength of 450 nm was achieved by sample 20% Cd0.8Zn0.2S/1% Pt/g-C3N4.

Defect Engineering of Pt/TiO2-x Photocatalysts via Reduction Treatment Assisted by Hydrogen Spillover

Defect engineering of metal oxides is a facile and promising strategy to improve their photocatalytic activity. In the present study, Pt/TiO_2-x was prepared by a reduction treatment assisted by hydrogen spillover to pure rutile, anatase, and brookite and was subsequently used for hydrogen production from an aqueous methanol solution. With increasing reduction temperature, the photocatalytic activity of the rutile Pt/TiO_2-x increased substantially, whereas the activity of anatase Pt/TiO_2-x decreased and that of brookite Pt/TiO_2-x was independent of the treatment temperature. Electron-spin resonance analysis revealed that rutile and brookite possess similar defect sites (Ti³⁺ and concomitant oxygen vacancy) after the reduction at 600 °C, whereas different resonance signals were observed for anatase after the reduction at 600 °C. During the reduction process, electrons donated from spillover hydrogen migrate between the conduction band and the inherent midgap states. This research demonstrates that the depth of the inherent midgap states, depending on the crystal phases, influences the generation of defects, which play a key role in the photocatalytic performance of Pt/TiO_2-x.

Speciation and separation of platinum(iv) polynuclear complexes in concentrated nitric acid solutions

Understanding the solution chemistry of Pt(iv) is crucial for the hydrometallurgy of precious metals. To gain such an understanding, the speciation and separation of Pt(iv) complexes in concentrated HNO₃ solutions were investigated via Pt L_III edge X-ray absorption fine structure (XAFS) spectroscopy. The XAFS results for concentrated HNO₃ solutions of Na₂Pt(OH)₆ revealed the dominant presence of Pt polynuclear complexes, wherein the formation of Pt(iv) polynuclear complexes depended on the metal concentration and the Na₂Pt(OH)₆ dissolution temperature. The dominant species present in a heated nitrate solution of 0.90 g-Pt L^-1 and a non-heated nitrate solution of 3.2 g-Pt L^-1 were dinuclear Pt(iv) complexes, whereas those in a heated solution of 3.0 g-Pt L^-1 were predominantly larger polynuclear complexes, such as, tetra- and hexa-nuclear complexes. The presence of larger Pt(iv) complexes was confirmed via XAFS spectroscopy, wherein the adsorption of Pt(iv) ions from a 10 M HNO₃ solution by a chelating resin functionalised with iminodiacetic acid and a strongly basic anion-exchange resin bearing trimethyl ammonium nitrate was examined. The adsorption of 50 mg L^-1 of Pt(iv) by the two resins was tested using aqueous solutions diluted from heated HNO₃ solutions with varying metal concentrations, and also from a non-heated solution. We found that Pt(iv) complexes from heating solutions containing high Pt(iv) concentrations displayed high adsorption percentages. In addition, the selective adsorption of Pt(iv) over Pd(ii), Ag(i), Cu(ii), Ni(ii), and Fe(iii) from a 10 M HNO₃ solution was achieved using a strongly basic anion-exchange resin.