Covalent Organic Polymer as a Carborane Carrier for Imaging-Facilitated Boron Neutron Capture Therapy

Recent Advances in Carborane-Based Crystalline Porous Materials

The field of carborane research has witnessed continuous development, leading to the construction and development of a diverse range of crystalline porous materials for various applications. Moreover, innovative synthetic approaches are expanding in this field. Since the first report of carborane-based crystalline porous materials (CCPMs) in 2007, the synthesis of carborane ligands, particularly through innovative methods, has consistently posed a significant challenge in discovering new structures of CCPMs. This paper provides a comprehensive summary of recent advances in various synthetic approaches for CCPMs, along with their applications in different domains. The primary challenges and future opportunities are expected to stimulate further multidisciplinary development in the field of CCPMs.

64Cu-Labeled Boron-Containing Cyclic RGD Peptides for BNCT and PET Imaging

The burgeoning interest in developing boron neutron capture therapy (BNCT) tracers and their accompanying diagnostics for the treatment of recalcitrant tumors has prompted this investigation. Our study aims to devise a tumor treatment strategy utilizing BNCT to target the αvβ3 integrin. To this end, we propose a pioneering boron-infused cyclic Arg-Gly-Asp (RGD) peptide, cRGD(d-BPA)K, designed as an efficacious BNCT tracer. Additionally, we introduce its diagnostic complement, DOTA-cRGD(d-BPA)K, tailored for positron emission tomography (PET) to visualize αvβ3 expressed tumors. Radiolabeling [64Cu]Cu-DOTA-cRGD(d-BPA)K (64Cu-1) resulted in a high radiochemical yield and purity. The radiotracer exhibited exceptional in vitro stability and demonstrated significant uptake in U87MG tumors via PET imaging. Biodistribution analysis using compound 2 showed a 7.0 ppm accumulation of boron in the U87MG tumor 1 h post-intravenous injection. Furthermore, compound 2 displayed superior tumor/blood (2.41) and tumor/muscle (2.46) ratios compared to the clinically approved l-BPA-fructose. Both compound 2 and its diagnostic counterpart 64Cu-1 hold potential for BNCT and cancer diagnosis, respectively, via molecular imaging.

Molecular engineering of AIE-active boron clustoluminogens for enhanced boron neutron capture therapy

The development of boron delivery agents bearing an imaging capability is crucial for boron neutron capture therapy (BNCT), yet it has been rarely explored. Here we present a new type of boron delivery agent that integrates aggregation-induced emission (AIE)-active imaging and a carborane cluster for the first time. In doing so, the new boron delivery agents have been rationally designed by incorporating a high boron content unit of a carborane cluster, an erlotinib targeting unit towards lung cancer cells, and a donor-acceptor type AIE unit bearing naphthalimide. The new boron delivery agents demonstrate both excellent AIE properties for imaging purposes and highly selective accumulation in tumors. For example, at a boron delivery agent dose of 15 mg kg-1, the boron amount reaches over 20 μg g-1, and both tumor/blood (T/B) and tumor/normal cell (T/N) ratios reach 20-30 times higher than those required by BNCT. The neutron irradiation experiments demonstrate highly efficient tumor growth suppression without any observable physical tissue damage and abnormal behavior in vivo. This study not only expands the application scopes of both AIE-active molecules and boron clusters, but also provides a new molecular engineering strategy for a deep-penetrating cancer therapeutic protocol based on BNCT.

Covalent Organic Frameworks: Opportunities for Rational Materials Design in Cancer Therapy

Nanomedicines are extensively used in cancer therapy. Covalent organic frameworks (COFs) are crystalline organic porous materials with several benefits for cancer therapy, including porosity, design flexibility, functionalizability, and biocompatibility. This review examines the use of COFs in cancer therapy from the perspective of reticular chemistry and function-oriented materials design. First, the modification sites and functionalization methods of COFs are discussed, followed by their potential as multifunctional nanoplatforms for tumor targeting, imaging, and therapy by integrating functional components. Finally, some challenges in the clinical translation of COFs are presented with the hope of promoting the development of COF-based anticancer nanomedicines and bringing COFs closer to clinical trials.

Boron-Containing MOF Nanoparticles with Stable Metabolism in U87-MG Cells Combining Microdosimetry To Evaluate Relative Biological Effectiveness of Boron Neutron Capture Therapy

Accurate prediction of the relative biological effectiveness (RBE) of boron neutron capture therapy (BNCT) is challenging. The therapy is different from other radiotherapy; the dynamic distribution of boron-containing compounds in tumor cells affects the therapeutic outcome considerably and hampers accurate measurement of the neutron-absorbed dose. Herein, we used boron-containing metal-organic framework nanoparticles (BMOFs) with high boron content to target U87-MG cells and maintain the concentration of the 10B isotope in cells. The content of boron in the cells could maintain 90% (60 ppm) within 20 min compared with that at the beginning; therefore, the accurate RBE of BNCT can be acquired. The effects of BNCT upon cells after neutron irradiation were observed, and the neutron-absorbed dose was obtained by Monte Carlo simulations. The RBE of BMOFs was 6.78, which was 4.1-fold higher than that of a small-molecule boron-containing agent (boric acid). The energy spectrum of various particles was analyzed by Monte Carlo simulations, and the RBE was verified theoretically. Our results suggested that the use of nanoparticle-based boron carriers in BNCT may have many advantages and that maintaining a stable boron distribution within cells may significantly improve the efficiency of BNCT.

Bioorthogonal chemistry for prodrug activation in vivo

Prodrugs have emerged as a major strategy for addressing clinical challenges by improving drug pharmacokinetics, reducing toxicity, and enhancing treatment efficacy. The emergence of new bioorthogonal chemistry has greatly facilitated the development of prodrug strategies, enabling their activation through chemical and physical stimuli. This "on-demand" activation using bioorthogonal chemistry has revolutionized the research and development of prodrugs. Consequently, prodrug activation has garnered significant attention and emerged as an exciting field of translational research. This review summarizes the latest advancements in prodrug activation by utilizing bioorthogonal chemistry and mainly focuses on the activation of small-molecule prodrugs and antibody-drug conjugates. In addition, this review also discusses the opportunities and challenges of translating these advancements into clinical practice.

In Vivo Application of Carboranes for Boron Neutron Capture Therapy (BNCT): Structure, Formulation and Analytical Methods for Detection

Carboranes have emerged as one of the most promising boron agents in boron neutron capture therapy (BNCT). In this context, in vivo studies are particularly relevant, since they provide qualitative and quantitative information about the biodistribution of these molecules, which is of the utmost importance to determine the efficacy of BNCT, defining their localization and (bio)accumulation, as well as their pharmacokinetics and pharmacodynamics. First, we gathered a detailed list of the carboranes used for in vivo studies, considering the synthesis of carborane derivatives or the use of delivery system such as liposomes, micelles and nanoparticles. Then, the formulation employed and the cancer model used in each of these studies were identified. Finally, we examined the analytical aspects concerning carborane detection, identifying the main methodologies applied in the literature for ex vivo and in vivo analysis. The present work aims to identify the current strengths and weakness of the use of carboranes in BNCT, establishing the bottlenecks and the best strategies for future applications.

Porous organic polymers (POPs) for environmental remediation

Modern global industrialization along with the ever-increasing growth of the population has resulted in continuous enhancement in the discharge and accumulation of various toxic and hazardous chemicals in the environment. These harmful pollutants, including toxic gases, inorganic heavy metal ions, anthropogenic waste, persistent organic pollutants, toxic dyes, pharmaceuticals, volatile organic compounds, etc., are destroying the ecological balance of the environment. Therefore, systematic monitoring and effective remediation of these toxic pollutants either by adsorptive removal or by catalytic degradation are of great significance. From this viewpoint, porous organic polymers (POPs), being two- or three-dimensional polymeric materials, constructed from small organic molecules connected with rigid covalent bonds have come forth as a promising platform toward various leading applications, especially for efficient environmental remediation. Their unique chemical and structural features including high stability, tunable pore functionalization, and large surface area have boosted the transformation of POPs into various macro-physical forms such as thick and thin-film membranes, which led to a new direction in advanced level pollutant removal, separation and catalytic degradation. In this review, our focus is to highlight the recent progress and achievements in the strategic design, synthesis, architectural-engineering and applications of POPs and their composite materials toward environmental remediation. Several strategies to improve the adsorption efficiency and catalytic degradation performance along with the in-depth interaction mechanism of POP-based materials have been systematically summarized. In addition, evolution of POPs from regular powder form application to rapid and more efficient size and chemo-selective, "real-time" applicable membrane-based application has been further highlighted. Finally, we put forward our perspective on the challenges and opportunities of these materials toward real-world implementation and future prospects in next generation remediation technology.

The Dawn of a New Era: Tumor-Targeting Boron Agents for Neutron Capture Therapy

Cancer is widely recognized as one of the most devastating diseases, necessitating the development of intelligent diagnostic techniques, targeted treatments, and early prognosis evaluation to ensure effective and personalized therapy. Conventional treatments, unfortunately, suffer from limitations and an increased risk of severe complications. In light of these challenges, boron neutron capture therapy (BNCT) has emerged as a promising approach for cancer treatment with unprecedented precision to selectively eliminate tumor cells. The distinctive and promising characteristics of BNCT hold the potential to revolutionize the field of oncology. However, the clinical application and advancement of BNCT technology face significant hindrance due to the inherent flaws and limited availability of current clinical drugs, which pose substantial obstacles to the practical implementation and continued progress of BNCT. Consequently, there is an urgent need to develop efficient boron agents with higher boron content and specific tumor-targeting properties. Researchers aim to address this need by integrating tumor-targeting strategies with BNCT, with the ultimate goal of establishing BNCT as an effective, readily available, and cutting-edge treatment modality for cancer. This review delves into the recent advancements in integrating tumor-targeting strategies with BNCT, focusing on the progress made in developing boron agents specifically designed for BNCT. By exploring the current state of BNCT and emphasizing the prospects of tumor-targeting boron agents, this review provides a comprehensive overview of the advancements in BNCT and highlights its potential as a transformative treatment option for cancer.

A Review of Planned, Ongoing Clinical Studies and Recent Development of BNCT in Mainland of China

Boron neutron capture therapy (BNCT) is a promising cancer treatment modality that combines targeted boron agents and neutron irradiation to selectively destroy tumor cells. In mainland China, the clinical implementation of BNCT has made certain progress, primarily driven by the development of compact neutron source devices. The availability, ease of operation, and cost-effectiveness offered by these compact neutron sources make BNCT more accessible to cancer treatment centers. Two compact neutron sources, one being miniature reactor-based (IHNI-1) and the other one being accelerator-based (NeuPex), have entered the clinical research phase and are planned for medical device registration. Moreover, several accelerator-based neutron source devices employing different technical routes are currently under construction, further expanding the options for BNCT implementation. In addition, the development of compact neutron sources serves as an experimental platform for advancing the development of new boron agents. Several research teams are actively involved in the development of boron agents. Various types of third-generation boron agents have been tested and studied in vitro and in vivo. Compared to other radiotherapy therapies, BNCT in mainland China still faces specific challenges due to its limited clinical trial data and its technical support in a wide range of professional fields. To facilitate the widespread adoption of BNCT, it is crucial to establish relevant technical standards for neutron devices, boron agents, and treatment protocols.

An Imine-Based Porous 3D Covalent Organic Polymer as a New Sorbent for the Solid-Phase Extraction of Amphenicols from Water Sample

In this paper, an imine-based porous 3D covalent organic polymer (COP) was synthesized via solvothermal condensation. The structure of the 3D COP was fully characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, and powder X-ray diffractometry, thermogravimetric analysis, and Brunauer-Emmer-Teller (BET) nitrogen adsorption. This porous 3D COP was used as a new sorbent for the solid-phase extraction (SPE) of amphenicol drugs, including chloramphenicol (CAP), thiamphenicol (TAP), and florfenicol (FF) in aqueous solution. Factors were investigated for their effects on the SPE efficiency, including the types and volume of eluent, washing speed, pH, and salinity of water. Under the optimized conditions, this method gave a wide linear range (0.1-200 ng/mL) with a high correlation coefficient value (R² > 0.99), low limits of detection (LODs, 0.01-0.03 ng/mL), and low limits of quantification (LOQs, 0.04-0.10 ng/mL). The recoveries ranged from 83.98% to 110.7% with RSDs ≤ 7.02%. The good enrichment performance for this porous 3D COP might contribute to the hydrophobic and π-π interactions, the size-matching effect, hydrogen bonding, and the good chemical stability of 3D COP. This 3D COP-SPE method provides a promising approach to selectively extract trace amounts of CAP, TAP, and FF in environmental water samples in ng quantities.

Study of Lithium Biodistribution and Nephrotoxicity in Skin Melanoma Mice Model: The First Step towards Implementing Lithium Neutron Capture Therapy

Boron neutron capture therapy (BNCT) is one of the promising treatment methods for malignant melanoma. The main issue of this technology is the insufficient selectivity of ¹⁰B accumulation in tumor cells. As a result of the neutron absorption by boron, an 84% energy release occurred within the cell by the nuclear reaction ¹⁰B (n, α)⁷Li, which lead to tumor cell death. The use of lithium instead of boron brings a new unique opportunity-local 100% energy release-since all products of the ⁶Li (n, α)³H reaction have high linear energy transfer characteristics. The aim of this study was to determine the concentrations of Li in the tumor, skin, blood, brain and kidney in experimental animals with B16 melanoma and to analyze the potential Li toxicity after lithium carbonate administration at single doses of 300 and 400 mg/kg. Lithium carbonate was chosen since there is a long-term experience of its use in clinical practice for the treatment of psychiatric disorders. The inductively coupled plasma atomic emission spectrometry was used to evaluate Li concentrations in tissue samples. The accumulation efficiency of Li in the tumor was the highest at a time point of 30 min (22.4 µg/g; at a dose of 400 mg/kg). Despite the high lithium accumulation in the kidneys, the pathological changes in kidney tissues were not found. Thus, lithium may actually be used for the Li-NCT development and future studies can be conducted using ⁶Li and following irradiation of tumor cells using the schemes of lithium administration tested in this work.

Preparation of spherical silica hydroxyl-functionalized covalent organic polymer composites for mixed-mode liquid chromatography

Covalent organic polymers are an emerging class of amorphous microporous materials that have raised increasing concerns in analytical chemistry due to their unique structural and surface chemical properties. However, the application of covalent organic polymers as mixed-mode stationary phases in chromatographic separations has rarely been reported. Herein, novel spherical silica hydroxyl-functionalized covalent organic polymer composites were successfully prepared via a layer-by-layer approach. The structure and morphology of the materials were carefully characterized by elemental analysis, Fourier-transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, X-ray diffraction, thermogravimetric analysis, Brunauer-Emmett-Teller, and contact angle measurements. Baseline separations of various alkylbenzenes, polycyclic aromatic hydrocarbons, and nucleosides and bases were achieved on the prepared stationary phase under reversed-phase/hydrophilic interaction mode. The column efficiencies of 23 853 and 36 580 plates/m were obtained for butylbenzene and uracil, respectively, and the relative standard deviation of the retention time for continuous injections was less than 1.38% (n = 10), suggesting satisfactory column efficiency and repeatability. Additionally, this novel stationary phase realized the complete separation of the endocrine-disrupting chemicals in river water. This work affords a new route for synthesizing covalent organic polymers-based mixed-mode stationary phase and further reveals their great potential in chromatographic separation.

Boron Vehiculating Nanosystems for Neutron Capture Therapy in Cancer Treatment

Boron neutron capture therapy is a low-invasive cancer therapy based on the neutron fission process that occurs upon thermal neutron irradiation of ¹⁰B-containing compounds; this process causes the release of alpha particles that selectively damage cancer cells. Although several clinical studies involving mercaptoundecahydro-closo-dodecaborate and the boronophenylalanine-fructose complex are currently ongoing, the success of this promising anticancer therapy is hampered by the lack of appropriate drug delivery systems to selectively carry therapeutic concentrations of boron atoms to cancer tissues, allowing prolonged boron retention therein and avoiding the damage of healthy tissues. To achieve these goals, numerous research groups have explored the possibility to formulate nanoparticulate systems for boron delivery. In this review. we report the newest developments on boron vehiculating drug delivery systems based on nanoparticles, distinguished on the basis of the type of carrier used, with a specific focus on the formulation aspects.

Polyglycerol Functionalized 10 B Enriched Boron Carbide Nanoparticle as an Effective Bimodal Anticancer Nanosensitizer for Boron Neutron Capture and Photothermal Therapies

Boron neutron capture therapy (BNCT) is a non-invasive cancer treatment with little adverse effect utilizing nuclear fission of ¹⁰ B upon neutron irradiation. While neutron source has been developed from a nuclear reactor to a compact accelerator, only two kinds of drugs, boronophenylalanine and sodium borocaptate, have been clinically used for decades despite their low tumor specificity and/or retentivity. To overcome these challenges, various boron-containing nanomaterials, or "nanosensitizers", have been designed based on micelles, (bio)polymers and inorganic nanoparticles. Among them, inorganic nanoparticles such as boron carbide can include a much higher ¹⁰ B content, but successful in vivo applications are very limited. Additionally, recent reports on the photothermal effect of boron carbide are motivating for the addition of another modality of photothermal therapy. In this study, ¹⁰ B enriched boron carbide (¹⁰ B₄ C) nanoparticle is functionalized with polyglycerol (PG), giving ¹⁰ B₄ C-PG with enough dispersibility in a physiological environment. Pharmacokinetic experiments show that ¹⁰ B₄ C-PG fulfills the following three requirements for BNCT; 1) low intrinsic toxicity, 2) ¹⁰ B in tumor/tumor tissue (wt/wt) ≥ 20 ppm, and 3) ¹⁰ B concentrations in tumor/blood ≥ 3. In vivo study reveals that neutron irradiation after intravenous administration of ¹⁰ B₄ C-PG suppresses cancer growth significantly and eradicates cancer with the help of near-infrared light irradiation.

Carboranes as unique pharmacophores in antitumor medicinal chemistry

Carborane is a carbon-boron molecular cluster that can be viewed as a 3D analog of benzene. It features special physical and chemical properties, and thus has the potential to serve as a new type of pharmacophore for drug design and discovery. Based on the relative positions of two cage carbons, icosahedral closo-carboranes can be classified into three isomers, ortho-carborane (o-carborane, 1,2-C2B10H12), meta-carborane (m-carborane, 1,7-C2B10H12), and para-carborane (p-carborane, 1,12-C2B10H12), and all of them can be deboronated to generate their nido- forms. Cage compound carborane and its derivatives have been demonstrated as useful chemical entities in antitumor medicinal chemistry. The applications of carboranes and their derivatives in the field of antitumor research mainly include boron neutron capture therapy (BNCT), as BNCT/photodynamic therapy dual sensitizers, and as anticancer ligands. This review summarizes the research progress on carboranes achieved up to October 2021, with particular emphasis on signaling transduction pathways, chemical structures, and mechanistic considerations of using carboranes.

Pyrene-based sulfonated organic porous materials for rapid adsorption of cationic dyes in water

Porous organic polymers (POP) have gained attention because of their high specific surface area, porosity and their simplicity in synthesis, but for the most part, they are hydrophobic because of their organic backbone, making it difficult to expand their applications. Here, we have obtained poly(pyrene) porous organic polymers (PyPOP) through the polymerization of pyrene monomers catalysed by aluminium trichloride, which is a simple and inexpensive synthesis method. The sulfonated poly(pyrene) porous organic polymers (PyPOP-SO₃H) obtained showed rapid adsorption of cationic dyes, especially malachite green (MG adsorption 1607 mg/g) and methylene blue (MB adsorption 1220 mg/g) in pH = 7 aqueous solution, room temperature. The results show that the Freundlich model is more in line with the adsorption process than the Langmuir model, whether for methylene blue or malachite green. In addition, the PSO kinetic model fits better than PFO kinetic model, whether it is for the adsorption of methylene blue or malachite green. The excellent adsorption performance of PyPOP-SO3H for cationic dyes may be due to the introduction of sulfonic acid groups, which not only increases the specific surface area but also allows better dispersion in water, increasing contact points and adsorption efficiency. This research expands the scope of exploration and application of POP.

Porous organic polymers as a platform for sensing applications

Sensing analysis is significantly important for human health and environmental safety, and has gained increasing concern. As a promising material, porous organic polymers (POPs) have drawn widespread attention due to the availability of plentiful building blocks and their tunable structures, porosity and functions. Moreover, the permanent porous nature could provide a micro-environment to interact with guest molecules, rendering POPs attractive for application in the sensing field. In this review, we give a comprehensive overview of POPs as a platform for sensing applications. POP-based sensors are mainly divided into five categories, including fluorescence turn-on sensors, fluorescence turn-off sensors, ratiometric fluorescent sensors, colorimetric sensors and chemiresistive sensors, and their various sensing applications in detecting explosives, metal ions, anions, small molecules, biological molecules, pH changes, enantiomers, latent fingerprints and thermosensation are summarized. The different structure-based POPs and their corresponding synthetic strategies as well as the related sensing mechanisms mainly including energy transfer, donor-acceptor electron transfer, absorption competition quenching and inner filter effect are also involved in the discussion. Finally, the future outlook and perspective are addressed briefly.

Development of nanotechnology-mediated precision radiotherapy for anti-metastasis and radioprotection

Radiotherapy (RT), including external beam RT and internal radiation therapy, uses high-energy ionizing radiation to kill tumor cells.

Radionanomedicine: Advanced Strategy for Precision Theranostics of Breast Cancer

Breast carcinoma remains one of the most common and fatal cancers, and even though a series of general therapeutic approaches have been used to treat breast cancer, their outcomes are significantly affected by a variety of side effects. However, nanomedicine could offer novel strategies for dealing with breast carcinoma. In fact, an increasing number of radionanomedicine approaches have recently been used in both diagnostics and therapy. To highlight this trend, the aim of the current review is to systemically summarize the latest advances in radionanomedicine, including single-modular imaging, multiple-modular imaging, and nanomedicine-based theranostics. Barriers to clinical application, the development of next-generation radionanomedicine, and challenges associated with future design are also discussed.

Advances in FePt-involved nano-system design and application for bioeffect and biosafety

The rapid development and wide application of nanomaterial-involved theranostic agents have drawn surging attention for improving the living standard of humankind and healthcare conditions. In this review, recent developments in the design, synthesis, biocompatibility evaluation and potential nanomedicine applications of FePt-involved nano-systems are summarized, especially for cancer theranostic and biological molecule detection. The in vivo multi-model imaging capability is discussed in detail, including magnetic resonance imaging and computed tomography. Furthermore, we highlight the significant achievements of various FePt-involved nanotherapeutics for cancer treatment, such as drug delivery, chemodynamic therapy, photodynamic therapy, radiotherapy and immunotherapy. In addition, a series of FePt-involved nanocomposites are also applied for biological molecule detection, such as H₂O₂, glucose and naked-eye detection of cancer cells. Ultimately, we also summarize the challenges and prospects of FePt-involved nano-systems in nanocatalytic medicine. This review is expected to give a general pattern for the development of FePt-involved nano-systems in the field of nanocatalytic medicine and analytical determination.

Post-synthetic modifications in porous organic polymers for biomedical and related applications

Porous organic polymers (POPs) are prepared by crosslinked polymerization of multidimensional rigid aromatic building blocks. Generally, POPs can be classified into crystalline covalent organic frameworks (COFs) and other poorly crystalline or amorphous porous polymers. Due to their remarkable intrinsic properties, such as high porosity, stability, tunability, and presence of numerous building blocks, several new POPs are being developed for application across various scientific fields. The essential sensitive functional groups needed for specific applications are not sustained under harsh POP preparation conditions. The recently developed post-synthetic modification (PSM) strategies for POPs have enabled their advanced applications that are otherwise restricted. Owing to the advanced PSM strategies POPs have experienced a blossoming resurgence with diverse functions, particularly in biomedical applications, such as bioimaging tools, drugs, enzymes, gene or protein delivery systems, phototherapy, and cancer therapy. This tutorial review focuses on the recently developed PSM strategies for POPs, especially for biomedical applications, and their future perspectives as promising bioapplicable materials.

Nanoscale porous organic polymers for drug delivery and advanced cancer theranostics

Finding a personalized nano theranostics solution, a nanomedicine for cancer diagnosis and therapy, is among the top challenges of current medicinal science. Porous organic polymers (POPs) are permanent porous organic materials prepared by linking relatively rigid multidimensional organic building blocks. POP nanoparticles have a remarkable advantage for cancer theranostics owing to their specific physicochemical characteristics such as high surface area, convincing pore size engineering, stimuli-responsive degradability, negligible toxicity, open covalent post-synthesis modification possibilities etc. POPs have crystalline and non-crystalline characteristics; crystalline POPs are popularly known as covalent organic frameworks (COFs), and have shown potential application across research areas in science. The early research and development on theranostics applications of nanoscale POPs has shown tremendous future potential for clinical translation. This tutorial review highlights the recently developed promising applications of nPOPs in drug loading, targeted delivery, endogenous and exogenous stimuli-responsive release, cancer imaging and combination therapy, regardless of their crystalline and poorly crystalline properties. The review will provide a platform for the future development and clinical translation of nPOPs by solving fundamental challenges of cancer nanomedicines in drug loading efficiency, size-optimization, biocompatibility, dispersibility and cell uptake ability.

Semiconducting polymer nano-radiopharmaceutical for combined radio-photothermal therapy of pancreatic tumor

Background

Pancreatic ductal adenocarcinoma (PDAC) is a devastatingly malignant tumor with a high mortality. However, current strategies to treat PDAC generally have low efficacy and high side-effects, therefore, effective treatment against PDAC remains an urgent need.

Results

We report a semiconducting polymer nano-radiopharmaceutical with intrinsic photothermal capability and labeling with therapeutic radioisotope ¹⁷⁷Lu (¹⁷⁷Lu-SPN-GIP) for combined radio- and photothermal therapy of pancreatic tumor. ¹⁷⁷Lu-SPN-GIP endowed good stability at physiological conditions, high cell uptake, and long retention time in tumor site. By virtue of combined radiotherapy (RT) and photothermal therapy (PTT), ¹⁷⁷Lu-SPN-GIP exhibited enhanced therapeutic capability to kill cancer cells and xenograft tumor in living mice compared with RT or PTT alone. More importantly, ¹⁷⁷Lu-SPN-GIP could suppress the growth of the tumor stem cells and reverse epithelial mesenchymal transition (EMT), which may greatly reduce the occurrence of metastasis.

Conclusion

Such strategy we developed could improve therapeutic outcomes over traditional RT as it is able to ablate tumor with relatively lower doses of radiopharmaceuticals to reduce its side effects.

Graphical abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s12951-021-01083-0.

Syntheses of thiophene appended N-confused phlorin isomers

A doubly confused thiapentapyrrane NSP-5 was synthesized by acid-catalysed condensation. Subsequent oxidation with DDQ did not afford the expected thiasapphyrin-like product. Instead, two tetrapyrrolic macrocycles, i.e. neo-N-confused phlorin (1) and N-confused phlorin-II (2) were obtained in the yields of 14% and 18%, respectively. The compounds were characterized by NMR, HRMS, and X-ray diffraction analyses. Single crystal structures clearly reveal that the thienyl units are not embedded into the macrocycles, but appended as meso-substituents, and the C[Formula: see text]-N and C[Formula: see text]-C[Formula: see text] cyclization modes can be clearly revealed by the crystal structures of 1 and 2, respectively. The observation that the thienyl unit is not involved in oxidative cyclization may be related to the relatively low reactivity of the thiophene moiety compared with the more electron-rich pyrrole unit. These results indicate that oxidative cyclization of linear thiaoligopyrranes containing terminal thiophene units may be developed as an effective approach for synthesizing nonconjugated macrocycles like phlorin analogues.

Enzyme-instructed supramolecular assemblies promote intracellular boron accumulation for boron neutron capture therapy

Selective accumulation of boron agents in cancer cells is of critical importance for BNCT. Here we involve enzyme-instructed supramolecular assembly (EISA) to facilitate the accumulation of a typical boron agent borylphenylalanine (BPA) in cancer cells. By covalently conjugating BPA to the phosphorylated assembly precursor, the boron-bearing precursors undergo phosphatase-catalyzed dephosphorylation to yield assembly molecules, which then self-assemble to form nanomaterials. Due to the up-regulated phosphatase activity of cancer cells, kinetic preference allows the EISA to accumulate boron in HeLa cells selectively. Interestingly, by attaching BPA on the backbone or side-chain of precursor, the boron-bearing isomers show different assembly propensity with time-dependent morphology change, which leads to the differentiated accumulation of boron inside cells. Overall, the optimized boron-bearing assembly precursor could significantly improve the boron accumulation compared with BPA in cancer cells. In this study, we have demonstrated a convenient method to introduce boron agents to cancer cells. We envision that the EISA-mediated accumulation of boron will be helpful in the design of boron agents to facilitate BNCT treatment.