Polydopamine Microsphere-Incorporated Electrospun Fibers as Novel Adsorbents for Dual-Responsive Adsorption of Methylene Blue

Harnessing synergy: Polydopamine-hBN integration in electrospun nanofibers for Co (II) ion, methylene blue and crystal violet dyes adsorption

In today's world, major pollutants, such as cationic dyes and heavy metals, pose a serious threat to human health and the environment. In this study, a novel adsorbent was created through the electrospinning of polyvinyl alcohol/polyacrylic acid (PVA/PAA), incorporated with hexagonal boron nitride (hBN) coated with polydopamine (PDA). The integration of hBN and PDA substantially enhanced the adsorption capacity of the PVA/PAA fibers, making them highly effective in adsorbing cationic dyes such as methylene blue and crystal violet, as well as cobalt (II) ions, from contaminated water. The adsorbents were assessed to understand how their adsorption behavior varies with pH, as well as to examine their adsorption kinetics and isotherms. The results indicate that the PVA/PAA-hBN@PDA adsorbent has maximum adsorption capacities of 1029.57 mg/g, 793.65 mg/g, and 62.46 mg/g for methylene blue, crystal violet, and cobalt (II) ions, respectively. This underscores the superior performance of the PVA/PAA-hBN@PDA adsorbent when compared to both the PVA/PAA and PVA/PAA-hBN adsorbents. The adsorption kinetics adhered to a pseudo-second-order model, indicating chemisorption, whereas the Langmuir model implied a monolayer adsorption. Overall, the findings of this study highlight the efficacy of harnessing the synergistic capabilities of hBN and PDA within the PVA/PAA-hBN@PDA adsorbents, providing an efficient and eco-friendly approach to removing cationic dyes and heavy metals from contaminated water, and thereby contributing to a cleaner and safer environment for all.

Efficient removal of Cr (VI) by Bifunction zinc porphyrin COF: Coupling adsorption with Photocatalysis, performance Evaluation, and mechanism analysis

HYPOTHESIS

Hexavalent chromium, recognized as one of the most toxic heavy metals, demands the development of advanced materials capable of both adsorption and photocatalysis for effective Cr (VI) removal.

EXPERIMENTS

This study successfully synthesized a two-dimensional zinc porphyrin covalent organic framework (ZnPor-COF) via a solvent-based method. Performance evaluations have demonstrated that the ZnPor-COF possesses outstanding capabilities for the adsorptive and/or photocatalytic elimination of Cr (VI). Particularly noteworthy is the observation that when adsorption and photocatalysis are coupled, the ZnPor-COF attains an exceptional 99.7 % removal rate for a Cr (VI) concentration of 30 mg/L within just 60 min, with minimal susceptibility to coexisting ions. After five consecutive cycles, the material sustains a removal efficiency of 90 %, indicative of its robust cyclability.

FINDINGS

Theoretical calculations, as well as experimental validations, have indicated that the integration of Zn ions into the porphyrin COF not only results in an expanded specific surface area and an increased count of adsorption sites but also significantly improves the COF's photosensitivity and the capability for charge carrier separation. Furthermore, the core of the synergistic effect between adsorption and photocatalysis lies in the ability of photocatalysis to substantially augment the adsorption process.

Removal of contaminants present in water and wastewater by cyclodextrin-based adsorbents: A bibliometric review from 1993 to 2022

Cyclodextrin (CD), a cyclic oligosaccharide from enzymatic starch breakdown, plays a crucial role in pharmaceuticals, food, agriculture, textiles, biotechnology, chemicals, and environmental applications, including water and wastewater treatment. In this study, a statistical analysis was performed using VOSviewer and Citespace to scrutinize 2038 articles published from 1993 to 2022. The investigation unveiled a notable upsurge in pertinent articles and citation counts, with China and USA contributing the highest publication volumes. The prevailing research focus predominantly revolves around the application of CD-based materials used as adsorbents to remove conventional contaminants such as dyes and metals. The CD chemistry allows the construction of materials with various architectures, including cross-linked, grafted, hybrid or supported systems. The main adsorbents are cross-linked CD polymers, including nanosponges, fibres and hybrid composites. Additionally, research efforts are actually concentrated on the synthesis of CD-based membranes, CD@graphene oxide, and CD@TiO2. These materials are proposed as adsorbents to remove emerging pollutants. By employing bibliometric analysis, this study delivers a comprehensive retrospective review and synthesis of research concerning CD-based adsorbents for the removal of contaminants from wastewater, thereby offering valuable insights for future large-scale application of CD-based adsorption materials.

Efficient removal of methylene blue from aqueous solution by ZIF-8-decorated helicoidal electrospun polymer strips

Immobilization of metal-organic frameworks (MOFs) on electrospun products for wastewater treatment has garnered considerable attention in recent years. However, the effect of the overall geometry and surface-area-to-volume ratio of MOF-decorated electrospun architectures on their performances have rarely been investigated. Herein, we prepared polycaprolactone (PCL)/polyvinylpyrrolidone (PVP) strips with helicoidal geometries via immersion electrospinning. By regulating the weight ratio of PCL to PVP, the morphologies and surface-area-to-volume ratios of the PCL/PVP strips could be controlled precisely. Then, the zeolitic imidazolate framework-8 (ZIF-8) for removing methylene blue (MB) from an aqueous solution was immobilized on the electrospun strips, resulting in ZIF-8-decorated PCL/PVP strips. The key characteristics of these composite products, such as adsorption and photocatalytic degradation behavior toward MB in the aqueous solution, were carefully investigated. Owing to the desired overall geometry and high surface-area-to-volume ratio of the ZIF-8-decorated helicoidal strips, a high MB adsorption capacity of 151.6 mg g^-1 was obtained, which is significantly higher than those with conventional electrospun straight fibers. In addition, higher MB uptake rates, higher recycling and kinetic adsorption efficiencies, higher MB photocatalytic degradation efficiencies, and faster MB photocatalytic degradation rates were confirmed. This work provides new insights to improve the performance of existing and potential electrospun product-based water treatment strategies.

Biomimetic Polylactic Acid Electrospun Fibers Grafted with Polyethyleneimine for Highly Efficient Methyl Orange and Cr(VI) Removal

The rapid growth of industrialization has resulted in the release of large quantities of pollutants into the environment, especially dyes and heavy metals, which are environmentally hazardous for humans and animals. It is considered as the most promising and environmentally friendly route to develop green materials by using the green modification method, which has no negative impact on the environment. In this work, the green material of polylactic acid (PLA) was used as the substrate material, and a novel modification method of polydopamine (PDA)-assisted polyethyleneimine (PEI) grafting was developed. The electrospun PLA fibers are mainly composed of stereocomplex crystallites, which were achieved via the electrospinning of poly(l-lactic acid) and poly(d-lactic acid). The water-soluble PEI was grafted onto the PDA-modified PLA fibers through the glutaraldehyde-assisted cross-linking reaction. The prepared composite fibers can be degraded, which is environmentally friendly and meets the requirements of sustainable development. The potential application of such PLA composite fibers in wastewater treatment was intensively evaluated. The results show that at appropriate fabrication conditions (PDA concentration of 3 g·L^-1 and a PEI molecular weight of 70,000 g·mol^-1), the composite fibers exhibit the maximum adsorption capacities of 612 and 398.41 mg·g^-1 for methyl orange (MO) and hexavalent chromium [Cr(VI)], respectively. Simultaneously, about 64.79% of Cr(VI) adsorbed on the composite fibers was reduced to Cr(III). The above results show that the PLA composite fibers have a good development prospect in the field of wastewater treatment.

Performance Evaluation of Gum Gellan-Based Hydrogel as a Novel Adsorbent for the Removal of Cationic Dyes: Linear Regression Models

In this work, the suitability and efficacy of the previously reported biodegradable gellan gum (GG)-based hydrogel have been thoroughly investigated with respect to the adsorption mechanisms of malachite green (MG) and methylene blue (MB) dyes. The dyes' removal from aqueous solutions using GG-cl-poly(AA) as an adsorbent material has been studied in a discontinuous system with respect to contact time, dose, pH, and temperature. The synthesized hydrogel was characterized by FT-IR, TGA, XRD, ¹H NMR, and FE-SEM. The adsorption capacity of GG-cl-poly(AA) hydrogel was investigated at different pH solutions (3, 7, and 10), and it was found that neutralized charge plays a crucial role in the enhancement of dye removal. To better understand the behavior of the GG-cl-poly(AA) hydrogel in adsorbing model dyes, adsorption kinetics, isotherms, and thermodynamics were also investigated. The values of qmax for MG and MB were obtained to be 552.48 and 531.9 mg g^-1. In addition, the influence of NaCl concentration on adsorption efficiency was investigated, and it was found that as the ion concentration increased, the effectiveness of the adsorption process dropped. Moreover, the synthesized hydrogel's potential application in the adsorption and separation of dyes from wastewater is enhanced by the reusability investigations conducted in convenient conditions. As a result, it is possible to conclude that reusing GG-cl-poly(AA) hydrogel as a low-cost, easy-to-handle, nontoxic material in an industrial wastewater treatment plant's adsorption process can provide a number of advantages, including high efficiency for MG and MB removal and cost savings on overall treatment plant operations.

Mussel-inspired polydopamine-modified silk nanofibers as an eco-friendly and highly efficient adsorbent for cationic dyes

Obtaining silk nanofibers by simple swelling and mechanical splitting of fibers.

Iodine/iodide-doped polymeric nanospheres for simultaneous voltammetric detection of p-aminophenol, phenol, and p-nitrophenol

A sensor was developed for the first time based on polydopamine nanospheres doped with I₂, I^-, and IO₃^- species (PDA-Iodine), to determine the concentration of p-aminophenol (p-AP), phenol (Ph), and p-nitrophenol (p-NP) simultaneously. These polymeric nanospheres were successfully characterized using a variety of techniques including field emission scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared, Raman spectroscopy, and X-ray diffraction analysis. A carbon paste electrode was modified with the PDA-Iodine (CPE/PDA-Iodine). Because of the electrocatalytic activity of DA/DQ, I₂ and I^- species (in the structure of PDA-Iodine), CPE/PDA-Iodine shows enhancement in the electrooxidation peak currents as well as slight negative shift in peak potentials of p-AP, Ph, and p-NP compared with a bare carbon paste electrode. Under optimal experimental conditions, the linear calibration plots are linear in the ranges 0.5-120 μM for p-AP, 0.7-120 μM for Ph, and 1.0-100 μM for p-NP with limits of detection of 30, 40, and 80 nM for p-AP, Ph, and p-NP, respectively (S/N = 3). To prove the performance of the method, the repeatability of the signals of CPE/PDA-Iodine was evaluated and the RSD values obtained were 2.9%, 3.2%, and 3.1% for p-AP (45 µM), Ph (40 µM), and p-NP (40 µM), respectively. The CPE/PDA-Iodine is a promising new sensor for sensing p-AP, Ph, and p-NP simultaneously in tap and river water sample and the values of recoveries for spiked samples were in the range 94.0-104.4%.

Emulsion-Templated Porous Polymers for Efficient Dye Removal

A high internal phase emulsion (HIPE) method was used to produce adsorbents with an interconnected porous structure. HIPE was prepared using vinyl benzyl chloride (VBC), divinylbenzene (DVB), tert-butyl acrylate, and Span80 as the organic phase and water with K₂S₂O₈ and CaCl₂ as the water phase. The polymerization of the organic phase produced highly porous polymers called polyHIPE, carrying two functional groups. As a result of the template method, polyHIPEs have a low surface area. To overcome this drawback, polyHIPE was hyper-cross-linked through VBC to create meso- and micropores, resulting in a higher surface area. Then the polymer surface was tailored with carboxylic acid groups by simple hydrolysis of tert-butyl acrylate. The adsorption performances of the acidic functional hyper-cross-linked polyHIPEs prepared for the various reaction times of 0, 15, and 60 min were compared for methylene blue. The hyper-cross-linked polyHIPEs showed an enhanced adsorption kinetics for methylene blue, and the 15 min hyper-cross-linking reaction increased the rate of methylene blue adsorption significantly. It was proven that the polyHIPE adsorbent can be reused by treating it with an aqueous acidic solution in ethanol.

Polydopamine-Modified Cellulose Nanofibril Composite Aerogel: An Effective Dye Adsorbent

In this study, a new cellulose nanofibril (CNF) composite aerogel was fabricated using a green and facile mussel-inspired coating strategy. First, the CNF hydrogel was crosslinked by calcium ion followed by immersion in dopamine solution. Second, the surface of CNF was modified using polydopamine (PDA) to obtain PDA@CNF (PCNF) composite aerogel. The PCNF composite aerogels had large surface areas (368.15 m²/g) and low bulk density (27.2 mg/cm³). The composite aerogel exhibited improved mechanical properties, which were almost three times compared with those of CNF aerogel. Moreover, PCNF composite aerogel had good resilience under a wet state. The PDA functional layer remarkably enhanced the adsorption capacities of the composite aerogel for methylene blue (MB). The maximum adsorption of MB was 208 mg/g at an initial dye concentration of 50 mg/L. The adsorption isotherm and kinetic behaviors of the composite aerogel were consistent with Langmuir and pseudo-second-order models. In addition, the PCNF composite aerogels had a high adsorption capacity over a wide pH range. The reuse experiment showed that the removal efficiency of the composite aerogel remained higher than 85% after five cycles. Therefore, PCNF composite aerogels may have potential application in wastewater treatment due to its environmental sustainability and low energy consumption.

Tough porous nanocomposite hydrogel for water treatment

Developing a cost-effective, stable, and recyclable adsorbent with high adsorption capacity and rapid adsorption kinetics is highly demanded for water treatment but has been proven challenging. Herein, we report a one-step strategy to synthesize tough porous nanocomposite hydrogel, by introducing biochar nanoparticles and interconnected pores into a polyacrylamide hydrogel matrix as an exemplary system. The polyacrylamide hydrogel provides the overall mechanical strength to carry loads and facilitate recycling, the biochar provides adsorptive locus for high adsorption capacity, and the interconnected pores expedite solvent transport for rapid adsorption kinetics. Mechanical characterizations manifest that the porous biochar hydrogel possesses a tensile strength of 128 kPa, a stretchability of 5.9, and a toughness of 538 J m^-2. Porous structure analysis reveals that the hydrogel contains an increscent specific surface area by 441% and an augmented pore volume by 279% compared to pure polyacrylamide hydrogel. Experiments pertaining to adsorption isotherms and kinetics, with methylene blue as the model adsorbate, indicate enhanced adsorption performances. The tough hydrogel also allows facile recycling and maintains mechanical robustness after five regeneration cycles. Furthermore, biocompatibility is endorsed by cytotoxicity test. The proposed method could open an ample space for designing and synthesizing tough porous nanocomposite hydrogels for water treatment.

Polydopamine-assisted polyethylenimine grafting melamine foam and the application in wastewater purification

Melamine foam (MF) is a widely used commercial product and exhibits wide applications in many fields ranging from building, transportation to daily chemical product. Recent researches confirm that the special three-dimensional (3D) framework structure of MF can be an ideal substrate to prepare functional materials. In this work, the water-soluble polyethylenimine (PEI) was grafted onto the framework of MF to develop the water purification material toward heavy metal ions removal. The grafting of PEI on MF was achieved with the aids of polydopamine (PDA) coating and epoxy chloropropane (ECH) cross-linking successively. The 3D framework of MF could be well reserved and PEI was homogeneously grafted onto the framework surface. The adsorption capacity of the adsorbent was dependent upon the molecular wight of PEI. Lower PEI molecular weight endowed the adsorbent with better adsorption ability. The maximum adsorption capacity reached 328.95 mg/g, and the adsorbent exhibited extremely high adsorption stability with increasing cycling measurement numbers. Further results showed that the adsorbent also exhibited high reduction ability and induced about 62.5% toxic Cr(VI) to be reduced. This work confirms that the PEI-modified MF sample is a promising adsorbent in the removal of heavy metal ions and it can be used in wastewater treatment.

Nanofibrous Photocatalytic Membranes Based on Tailored Anisotropic Gold/Ceria Nanoparticles

The combination of plasmonic nanoparticles with semiconductor photocatalysts is a good strategy for synthesizing highly efficient photocatalysts. Such binary nanoparticles have demonstrated enhanced catalytic activity in comparison to either plasmonic catalysts or semiconductor catalysts. However, problematic recovery and limited long-term colloidal stability of those nanoparticles in suspension limit their wide use in catalysis. To palliate to such limitations, we embedded binary nanoparticles in polymer fibers to design photocatalytic membranes. First, we used the selective over-growth of crystalline cerium oxide on the gold nanoparticle template with distinct shapes. Gold nanospheres, gold nanorods, and gold nanotriangles were used as the template for the growth of the cerium oxide domains. Then, the resulting nanoparticles were used to catalyze model reactions in suspensions. The gold nanoparticles covered with patches of cerium oxide outperformed the fully covered and naked nanoparticles in terms of catalytic efficiency. Finally, the most efficient binary nanostructures were successfully embedded in nanofibrous membranes by colloidal electrospinning and used in water remediation experiments in a flow-through reactor.

Porous carbon nanotube microspheres with tailorable surface wettability areas for oil adsorption

HYPOTHESIS

Oil adsorption is significant for water purification and environmental protection. However, the conventional bulk sorbents face the predicament of uncontrollable motion as well as hydrophobic nature the whole body, which largely restricts their uptake capacity underwater. Hence, novel adsorbent material for high-efficient oil uptake both at the surface and under the water is urgently required.

EXPERIMENTS

We presented a phase-transition lysozyme coating approach to fabricate porous carbon nanotube microspheres with tailorable surface wettability areas for versatile oil adsorption. Because of the existence of magnetic nanoparticle in one hemisphere, the multi-sites coating was easily achieved by constantly changing orientations of the magnetic field. Owing to the integration of various hydrophilic functional groups in lysozyme as well as remarkable adhesion to virtually arbitrary materials, the intrinsically hydrophobic surface of the microspheres was partially modified hydrophilic on multiple sites.

FINDINGS

It was demonstrated that the unique surface wettability feature and the porous structure enabled the microspheres to adsorb multiple contaminants both floating on the water and underwater. Besides, the magnetic-responsive ability allowed for controllable collection of oil contaminants. These features, along with the reusability, make the porous carbon nanotube microspheres excellent adsorbents for water purification.

Biomass-based superhydrophobic coating with tunable colors and excellent robustness

Multicolored superhydrophobic coating with high durability has been receiving tremendous attention in decorative applications. Herein, a facile method to fabricate multicolored superhydrophobic coating with excellent robustness has been developed by using cellulose and chitosan. The multicolored coatings can be obtained through single dyeing or mixed dyeing based on three primary dyes. The coating can be applied on hard substrates (e.g. glass, aluminum sheet) and soft substrates (e.g. cotton fabric) by diverse methods including spraying, dip-coating and painting. The colorful coating firmly adheres to the substrates due to the multiple interactions (siloxane covalent bonds and hydrogen bonds). The colorful coating exhibits water-repellant behaviors and can withstand sandpaper abrasion, tape-peeling cycles, water impact, salt spray test and UV environments. Furthermore, the multicolored coating can be used as a new type of pigment for painting on different substrates and is expected to have a huge potential application in technological design or decoration.

Carbon dots crosslinked chitosan/cellulose sponge capture of methyl blue by an adsorption process

For environmental protection, organic dyes and solvents of industrial wastewater must be eliminated. Here, a citric acid-based carbon dots (CA-CDs) crosslinked chitosan/microcrystalline cellulose (CS/MCC/CA-CDs) sponge was synthesized to study its adsorption performance for methyl blue (MB) dye. The morphology of the sponge was a tangled fibre with a bundle formed by hydrogen bonds between CA-CDs and the CS/MCC composite matrix. The abundant amount of tangled fibre bundle units can offer plentiful active adsorption sites to collect the dye molecules. The adsorption capacity of the CS/MCC/CA-CDs sponge toward MB was 306.8 mg/g at pH 10 and a temperature of 298 K. In addition, the pseudo-second-order kinetic model was matched with the adsorption kinetic experimental data, and the adsorption isotherm data can be described by the Langmuir models. This study proposed that the CS/MCC/CA-CDs sponge adsorbent creates tremendous potential application value in wastewater treatment due to its fast kinetics, high adsorption capacity, simple preparation, and eco-friendly properties.