Impact of Small Adsorbates in the Vibrational Spectra of Mg- and Zn-MOF-74 Revealed by First-Principles Calculations

Solvent Exchange Dynamics in M2(dobdc): An Interplay among Binding Strength, Exchange Kinetics, and Cooperativity

Solvent exchange is a crucial step in ensuring the complete activation of metal-organic frameworks (MOFs); however, the conditions for solvent exchange vary among MOFs, even within the isostructural variants. This study examines the factors contributing to solvent exchange by investigating the isostructural M2(dobdc) (M═Mg, Co, Zn) series. Common solvents N,N-dimethylformamide (DMF), ethanol (EtOH), and methanol (MeOH) are employed to assess the solvent exchange at coordinatively unsaturated sites (CUS) of M2(dobdc). By monitoring both solvents released from the MOF during solvent exchange and the coordination environment of metals within the MOF, a picture is constructed of exchange rates during early stages of solvent exchange as well as expulsion of the last traces of bound solvents. This differentiation is achieved by a combination of bulk monitoring of solvent phase composition and microscopic application of Raman spectroscopy on the single-crystal level. The kinetics of solvent replacement is revealed to have a substantial contribution from cooperativity; this phenomenon is observed in both the forward and reverse directions. Thermogravimetric analysis coupled with IR spectroscopy and density functional theory (DFT) calculations are employed to elucidate the relationship between solvent exchange rates and solvent binding energy. The solvent exchange rates are determined by the kinetic barriers of solvent exchange that do not follow the order of the solvent binding affinity. This work contributes to understanding the solvent exchange of MOFs by examining the interplay among the binding strength, exchange kinetics, and cooperativity. It further provides valuable insights for scrutinizing MOF activation protocols.

Harvesting Multicolor Photoluminescence in Nonaromatic Interpenetrated Metal-Organic Framework Nanocrystals via Pressure-Modulated Carbonyls Aggregation

Interpenetrated metal-organic frameworks (MOFs) with nonaromatic ligands provide a unique platform for adsorption, catalysis, and sensing applications. However, nonemission and the lack of optical property tailoring make it challenging to fabricate smart responsive devices with nonaromatic interpenetrated MOFs based on ligand-centered emission. In this paper, the pressure-induced aggregation effect is introduced in nonaromatic interpenetrated Zn4O(ADC)4(Et3N)6 (IRMOF-0) nanocrystals (NCs), where carbonyl groups aggregation results in O─O distances smaller than the sum of the van der Waals radii (3.04 Å), triggering the photoluminescence turn-on behavior. It is noteworthy that the IRMOF-0 NCs display an ultrabroad emission tunability of 130 nm from deep blue (440 nm) to yellow (570 nm) upon release to ambient conditions at different pressures. The eventual retention of through-space n-π* interactions in different degrees via pressure treatment is primarily responsible for achieving a controllable multicolor emission behavior in initially nonemissive IRMOF-0 NCs. The fabricated multicolor phosphor-converted light-emitting diodes based on the pressure-treated IRMOF-0 NCs exhibit excellent thermal, chromaticity, and fatigue stability. The proposed strategy not only imparts new vitality to nonaromatic interpenetrated MOFs but also offers new perspectives for advancements in the field of multicolor displays and daylight illumination.

Effect of Co-Adsorbed Guest Adsorbates on the Separation of Ethylene/Ethane Mixtures on Metal-Organic Frameworks with Open Metal Sites

Direct determination of the equilibrium adsorption and spectroscopic observation of adsorbent-adsorbate interaction is crucial to evaluate the olefin/paraffin separation performance of porous adsorbents. However, the experimental characterization of competitive adsorption of various adsorbates at atomic-molecular level in the purification of multicomponent gas mixtures is challenging and rarely conducted. Herein, solid-state NMR spectroscopy is employed to examine the effect of co-adsorbed guest adsorbates on the separation of ethylene/ethane mixtures on Mg-MOF-74, Zn-MOF-74 and UTSA-74. 1H MAS NMR facilitates the determination of equilibrium uptake and adsorption selectivity of ethylene/ethane in ternary mixtures. The co-adsorption of H2O and CO2 significantly leads to the degradation of ethylene uptake and ethylene/ethane selectivity. The detailed host-guest and guest-guest interactions are unraveled by 2D 1H-1H spin diffusion homo-nuclear correlation and static 25Mg NMR experiments. The experimental results verify H2O coordinated on open metal sites can supply a new adsorption site for ethylene and ethane. The effects of guest adsorbates on the adsorption capacity and adsorption selectivity of ethylene/ethane mixtures are in the following order: H2O>CO2>O2. This work provides a direct approach for exploring the equilibrium adsorption and detailed separation mechanism of multicomponent gas mixtures using MOFs adsorbents.

Modular Customization and Regulation of Metal-Organic Frameworks for Efficient Membrane Separations

Metal-organic frameworks (MOFs) are considered ideal membrane candidates for energy-efficient separations. However, the MOF membrane amount to date is only a drop in the bucket compared to the material collections. The fabrication of an arbitrary MOF membrane exhibiting inherent separation capacity of the material remains a long-standing challenge. Herein, we report a MOF modular customization strategy by employing four MOFs with diverse structures and physicochemical properties and achieving innovative defect-free membranes for efficient separation validation. Each membrane fully displays the separation potential according to the MOF pore/channel microenvironment, and consequently, an intriguing H2 /CO2 separation performance sequence is achieved (separation factor of 1656-5.4, H2 permeance of 964-2745 gas permeation unit). Taking advantage of this strategy, separation performance can be manipulated by a non-destructive modification separately towards the MOF module. This work establishes a universal full-chain demonstration for membrane fabrication-separation validation-microstructure modification and opens an avenue for exclusive customization of membranes for important separations.

In Situ Neutron Diffraction of Zn-MOF-74 Reveals Nanoconfinement-Induced Effects on Adsorbed Propene

Even though confinement was identified as a common element of selective catalysis and simulations predicted enhanced properties of adsorbates within microporous materials, experimental results on the characterization of the adsorbed phase are still rare. In this study, we provide experimental evidence of the increase of propene density in the channels of Zn-MOF-74 by 16(2)% compared to the liquid phase. The ordered propene molecules adsorbed within the pores of the MOF have been localized by in situ neutron powder diffraction, and the results are supported by adsorption studies. The formation of a second adsorbate layer, paired with nanoconfinement-induced short intermolecular distances, causes the efficient packing of the propene molecules and results in an increase of olefin density.

One-Pot Method Synthesis of Bimetallic MgCu-MOF-74 and Its CO2 Adsorption under Visible Light

A magnesium-based metal-organic framework (Mg-MOF-74) exhibits excellent CO₂ adsorption under ambient conditions. However, the photostability of Mg-MOF-74 for CO₂ adsorption is poor. In this study, Mg _x Cu_1-x -MOF-74 was synthesized by using a facile "one-pot" method. Furthermore, the effects of synthesis conditions on the CO₂ adsorption capacity were investigated comprehensively. X-ray diffraction, Fourier transform infrared, scanning electron microscopy, thermo gravimetric analysis, inductively coupled plasma atomic emission spectroscopy, ultraviolet-visible spectroscopy and photoluminescence spectroscopy, and CO₂ static adsorption-desorption techniques were used to characterize the structures, morphology, and physicochemical properties of Mg _x Cu_1-x -MOF-74. CO₂ uptake of Mg _x Cu_1-x -MOF-74 under visible light illumination was measured by the CO₂ static adsorption test combined with the Xe lamp. The results revealed that Mg _x Cu_1-x -MOF-74 exhibited excellent photocatalytic activity. Furthermore, the CO₂ adsorption capacity of Mg _x Cu_1-x -MOF-74 was excellent at a synthesis temperature and time of 398 K and 24 h in dimethylformamide (DMF)-EtOH-MeOH mixing solvents, respectively. Mg _x Cu_1-x -MOF-74 retained a crystal structure similar to that of the corresponding monometallic MOF-74, and its CO₂ uptake under visible light was superior to that of the corresponding monometallic MOF-74. Particularly, the CO₂ uptake of Mg_0.4Cu_0.6-MOF-74 under Xe lamp illumination for 24 h was the highest, up to 3.52 mmol·g^-1, which was 1.18 and 2.09 times higher than that of Mg- and Cu-MOF-74, respectively. The yield of the photocatalytic reduction of CO₂ to CO was 49.44 μmol·g_cat ^-1 over Mg_0.4Cu_0.6-MOF-74 under visible light for 8 h. Mg²⁺ and Cu²⁺ functioned as open alkali metal that could adsorb and activate CO₂. The synergistic effect between Mg and Cu metal strengthened Mg _x Cu_1-x -MOF-74 photostability for CO₂ adsorption and broadened the scope of its photocatalytic application. The "bimetallic" strategy exhibits considerable potential for use in MOF-based semiconductor composites and provides a feasible method for catalyst design with remarkable CO₂ adsorption capacity and photocatalytic activity.

An Mg-MOFs based multifunctional medicine for the treatment of osteoporotic pain

Bone pain is the primary problem for patients with osteoporosis. Ketoprofen is clinically used to treat osteoporotic pain, while long-term oral administration of ketoprofen can cause some side effects. In addition, osteoporosis is also accompanied by bone mass loss and inflammation. In this study, we designed a multifunctional drug (Ket@Mg-MOF-74) adopted Mg-MOF-74 to load ketoprofen to treat osteoporotic pain, bone loss and inflammation comprehensively. Mg-MOF-74 was prepared, and the physicochemical characterization proved that it had excellent physical and chemical stability. Ket@Mg-MOF-74 was synthesized by post-synthetic modification method and a high loading rate of ketoprofen was confirmed. Drug release and ion release experiments indicated Ket@Mg-MOF-74 had a good controlled release of ketoprofen and Mg in solution. Cell experiments in vitro proved the compound drug could significantly reduce the expression of pain-related genes of cyclooxygenase 2 (COX2), obviously up-regulated the expression of osteogenic cytokines and remarkably down-regulated the secretion of pro-inflammatory factors. Therefore, Ket@Mg-MOF-74 is believed a promising painkiller for osteoporotic bone pain, with the function of anti-inflammatory and promoting bone formation.