Ti-Modified LaFeO3/β-SiC Alveolar Foams as Immobilized Dual Catalysts with Combined Photo-Fenton and Photocatalytic Activity

Metal-organic frameworks (MOFs) for photoelectrocatalytic (PEC) reducing carbon dioxide (CO2) to hydrocarbon fuels

MOF-based photoelectrocatalysis (PEC) using CO2 as an electron donor offers a green, clean, and extensible way to make hydrocarbon fuels under more tolerant conditions. Herein, basic principles of PEC reduction of CO2 and the preparation methods and characterization techniques of MOF-based materials are summarized. Furthermore, three applications of MOFs for improving the photoelectrocatalytic performance of CO2 reduction are described: (i) as photoelectrode alone; (ii) as a co-catalyst of semiconductor photoelectrode or as a substrate for loading dyes, quantum dots, and other co-catalysts; (iii) as one of the components of heterojunction structure. Challenges and future wave surrounding the development of robust PEC CO2 systems based on MOF materials are also discussed briefly.

Selective and nonselective removal of hydrophobic compounds by coupling engineered FeOCl in a cathode-anode synergistic electrochemical platform

Efficient and selective removal of water pollutants remains a critical challenge. Here, we addressed this challenge by ingeniously engineering FeOCl via polyaniline intercalation and dodecyl group modification (FeOCl-P-S) to improve its activity and selectivity for the in situ removal of hydrophobic phenolic compounds. We further encapsulated the catalyst inside commercial cheap corundum balls and developed a "millimeter-scale reactor", which maintained a high efficiency of 86.02% after ten cycles with negligible physical changes. Moreover, we established the synergy between anodic (generating H+, O2, and IrO3) and cathodic reactions (utilizing H+ and O2) for H2O2 generation and direct anodic oxidation, an unexplored process, in a vertical bidirectional gas diffusion electrochemical system (VB-GDE). By combining the "reactor" and VB-GDE, we constructed a new platform for selective and nonselective continuous pollutant oxidation in a self-sustaining acidic environment with minimal chemical residues. This work presents a promising electrochemical technology for the efficient and selective removal of water pollutants.

Enhanced Therapeutic Potential of Irreversible Electroporation under Combination with Gold-Doped Mesoporous Silica Nanoparticles against EMT-6 Breast Cancer Cells

Irreversible electroporation (IRE) is a non-thermal tumor ablation technique that delivers short pulses of strong electric fields to cancer tissues and induces cell death through the destruction of cell membranes. Here, we synthesized gold-doped mesoporous silica nanoparticles (Au-MSNs) via incipient wetness impregnation and evaluated the therapeutic potentials of combination therapy with IRE. The fabricated Au-MSNs had around 80-100 nm of particle size and were successfully end-doped with Au nanoparticles. Combination treatment of IRE (800 V/cm) and Au-MSNs (100 μg/mL) increased cell membrane permeability by 25-fold compared with single IRE treatment. Cellular reactive oxygen species (ROS) and lipid peroxidation of EMT-6 cells were significantly increased by 14- and 265-fold, respectively, under combination treatment of IRE (800 V/cm) and Au-MSNs (100 µg/mL). Cytotoxic cell death increased by 28% under a combination treatment of IRE (800 V/cm) and Au-MSNs (100 ug/mL) over single IRE. Our studies suggest that the combination treatment of IRE with Au-MSNs can enhance the therapeutic efficacy of IRE for breast cancer.

Critical review of perovskite-based materials in advanced oxidation system for wastewater treatment: Design, applications and mechanisms

Perovskite has been widely concerned in the field of modern environmental catalysis due to its low price, high stability, excellent catalytic activity, diverse structure and strong conversion adaptability. In recent years, people have been working on the coupling of perovskite catalysts and advanced oxidation processes (AOPs) on the removal of organic pollutants from wastewater. In this review, we classified perovskites of different designs and summarized the application and basic reaction mechanisms of each perovskite in different AOPs. This review helps scientists selecting and designing more effective perovskite catalysts for AOPs by summarizing the applications and reaction mechanisms of perovskite in AOPs. At the end of the review, the challenges and future directions of perovskite in removing organic pollutants from wastewater are discussed.

Spinning disc photoreactor based visible-light-driven Ag/Ag2O/TiO2 heterojunction photocatalyst film toward the degradation of amoxicillin

The presence of antibiotics in waste and drinking water is causing increasing concern around the world, thereby an advanced sustainable technology needs to be developed to eliminate the antibiotics from water resources. Hence, an efficient spinning disc photoreactor (SDPR) equipped with visible light-activated Ag/Ag₂O/TiO₂ heterostructure thin film photocatalyst was assessed for the degradation of amoxicillin (AMX) as a typical antibiotic. The surface morphology, optoelectronic and structural features of Ag/Ag₂O/TiO₂ heterojunction were characterized by TEM, BET, mott Schottky, FESEM, EDS, AFM, XRD, UV-Vis-DRS, and contact angle measurements. Results confirm that Ag and Ag₂O have a significant effect on the photocharge carrier separation and transfer of the as-developed photocatalyst system. The operative variables including illumination time, rotational speed, solution flow rate, aeration rate, pH, and initial AMX concentration were optimized by CCD. The results displayed the maximum AMX photodegradation (97.91%) could be achieved at optimal conditions involving illumination time of 80 min, a rotational speed of 225 rpm, the solution flow rate of 0.6 L/min, aeration rate of 20 L/min, pH = 6, and initial AMX concentration of 20 mg/L. Interestingly, more than 79% COD and 64% TOC were removed under optimum conditions during 80 min illumination time, respectively. Active species tests confirmed the dominant role of ·OH and ·O₂^- in AMX degradation. finally, the XRD pattern confirmed that the reusability assessments of the heterojunction film could successfully retain its stability for six consecutive photocatalytic degradation runs. This work demonstrates the feasibility of utilizing visible-light-driven thin-film photocatalysts in spinning disc photoreactors in treating the tenacious antibiotic pollutants.

Porous Silicon Carbide (SiC): A Chance for Improving Catalysts or Just Another Active-Phase Carrier?

There is an obvious gap between efforts dedicated to the control of chemicophysical and morphological properties of catalyst active phases and the attention paid to the search of new materials to be employed as functional carriers in the upgrading of heterogeneous catalysts. Economic constraints and common habits in preparing heterogeneous catalysts have narrowed the selection of active-phase carriers to a handful of materials: oxide-based ceramics (e.g. Al₂O₃, SiO₂, TiO₂, and aluminosilicates-zeolites) and carbon. However, these carriers occasionally face chemicophysical constraints that limit their application in catalysis. For instance, oxides are easily corroded by acids or bases, and carbon is not resistant to oxidation. Therefore, these carriers cannot be recycled. Moreover, the poor thermal conductivity of metal oxide carriers often translates into permanent alterations of the catalyst active sites (i.e. metal active-phase sintering) that compromise the catalyst performance and its lifetime on run. Therefore, the development of new carriers for the design and synthesis of advanced functional catalytic materials and processes is an urgent priority for the heterogeneous catalysis of the future. Silicon carbide (SiC) is a non-oxide semiconductor with unique chemicophysical properties that make it highly attractive in several branches of catalysis. Accordingly, the past decade has witnessed a large increase of reports dedicated to the design of SiC-based catalysts, also in light of a steadily growing portfolio of porous SiC materials covering a wide range of well-controlled pore structure and surface properties. This review article provides a comprehensive overview on the synthesis and use of macro/mesoporous SiC materials in catalysis, stressing their unique features for the design of efficient, cost-effective, and easy to scale-up heterogeneous catalysts, outlining their success where other and more classical oxide-based supports failed. All applications of SiC in catalysis will be reviewed from the perspective of a given chemical reaction, highlighting all improvements rising from the use of SiC in terms of activity, selectivity, and process sustainability. We feel that the experienced viewpoint of SiC-based catalyst producers and end users (these authors) and their critical presentation of a comprehensive overview on the applications of SiC in catalysis will help the readership to create its own opinion on the central role of SiC for the future of heterogeneous catalysis.