Atomic Arrangement Modulation in CoFe Nanoparticles Encapsulated in N-Doped Carbon Nanostructures for Efficient Oxygen Reduction Reaction

Iron Triad-Based Bimetallic M-N-C Nanomaterials as Highly Active Bifunctional Oxygen Electrocatalysts

The use of precious metal electrocatalysts in clean electrochemical energy conversion and storage applications is widespread, but the sustainability of these materials, in terms of their availability and cost, is constrained. In this research, iron triad-based bimetallic nitrogen-doped carbon (M-N-C) materials were investigated as potential bifunctional electrocatalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). The synthesis of bimetallic FeCo-N-C, CoNi-N-C, and FeNi-N-C catalysts involved a precisely optimized carbonization process of their respective metal-organic precursors. Comprehensive structural analysis was undertaken to elucidate the morphology of the prepared M-N-C materials, while their electrocatalytic performance was assessed through cyclic voltammetry and rotating disk electrode measurements in a 0.1 M KOH solution. All bimetallic catalyst materials demonstrated impressive bifunctional electrocatalytic performance in both the ORR and the OER. However, the FeNi-N-C catalyst proved notably more stable, particularly in the OER conditions. Employed as a bifunctional catalyst for ORR/OER within a customized zinc-air battery, FeNi-N-C exhibited a remarkable discharge-charge voltage gap of only 0.86 V, alongside a peak power density of 60 mW cm-2. The outstanding stability of FeNi-N-C, operational for about 55 h at 2 mA cm-2, highlights its robustness for prolonged application.

Role of the Metal Precursor in Preparing Dual-Atom Catalysts for the Oxygen Reduction Reaction

Dual-atom catalysts (DACs) have arisen as a novel type of heterogeneous catalyst that extends from single-atom catalysts (SACs) by incorporating two kinds of metals. These materials have demonstrated enhanced performance when compared to SACs. The choice of metal precursors plays an important role in the synthesis of DACs. Here, we choose Fe and Co as DAC models and study types, contents, molar ratios of two precursors, and oxygen reduction reaction (ORR) activity. The Fe,Co DACs were synthesized by an adsorption-annealing approach, using nitrogen-doped graphitic carbon (NC) as the support. As a result, the adsorption ability of metal precursors on the support determines the metal loadings in Fe and Co DACs, leading to differences in ORR performance. The Fe precursors win the adsorption competitions in most cases, resulting in a much higher loading than that of Co precursors. Importantly, it is difficult to increase the precursor content by simply increasing the initial amount. Choosing the right combination of metal precursors, such as ferrocene and cobalt chloride, can yield Fe,Co DACs with enhanced ORR performance..

High entropy alloying strategy for accomplishing quintuple-nanoparticles grafted carbon towards exceptional high-performance overall seawater splitting

High entropy alloys (HEAs), a novel class of material, have been explored in terms of their excellent mechanical properties. Seawater electrolysis is a step towards sustainable production of carbon-neutral fuels such as H2, O2, and industrially demanding Cl2. Herein, we report a practically viable FeCoNiMnCr HEA nanoparticles system grafted on a conductive carbon matrix for promising seawater electrolysis. The comprehensive kinetics analysis of the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and chlorine evolution reaction (CER) confirms the effectiveness of our system. As an electrocatalyst, HEAs grafted on carbon black show trifunctionality with promising kinetics, selectivity and enduring performance, towards seawater splitting. We optimize high entropy alloy decorated/grafted carbon black (HEACB) catalysts, studying their synthesis temperature to scrutinize the effect of alloy formation variation on the catalysis efficacy. During the catalysis, selectivity between two mutually competing reactions, CER and OER, in the electrochemical catalysis of seawater is controlled by the reaction media pH. We employ Mott-Schottky measurements to probe the band structure of the intrinsically induced metal-semiconductor junction in the HEACB catalyst, where the carrier density and flat band potential are optimized. The HEACB sample provides promising results towards overall seawater electrolysis with a net half-cell potential of about 1.65 V with good stability, which strongly implies its broad practical applicability.

Enhancement of oxygen reduction reactivity on TiN by tuning the work function via metal doping

Oxide layers on conductive TiN have recently been investigated to catalyse the oxygen reduction reaction (ORR) in acidic media. The ORR reactivity, i.e., activity and selectivity, has been correlated with the surface nitrogen atoms. A new strategy, optimising the work function via the doping of foreign metals, is revealed herein to enhance the reactivity.

FeCoNiMnCr High-Entropy Alloy Nanoparticle-Grafted NCNTs with Promising Performance in the Ohmic Polarization Region of Fuel Cells

We report a user-friendly methodology for the successful designing of targeted single-phased face-centered cubic (fcc) FeCoNiMnCr high-entropy alloy (HEA) nanoparticle-grafted N-doped carbon nanotubes (CNTs). The nanostructure assimilates the advantages of N-doped carbon and HEA nanoparticles as a core for the efficient promotion of electrochemical oxygen reduction reaction (ORR). It emulates the commercial Pt-C electrocatalyst for ORR and shows promise for better performance in the Ohmic polarization region of fuel cells. In addition, it ensures superior efficacy over those of numerous recently reported transition metal-based traditional alloy composites for ORR. The presented methodology has the potential to pave the way for the effective designing of a variety of targeted HEA systems with ease, which is necessary to widen the domain of HEA for numerous applications.

Iron cobalt and nitrogen co-doped carbonized wood sponge for peroxymonosulfate activation: Performance and internal temperature-dependent mechanism

The directional regulation of oxidation capacity in the carbon-based peroxymonosulfate (PMS) activation system is a promising strategy for wastewater purification. In this work, a novel iron cobalt and nitrogen co-doped carbonized wood sponge (FeCoNCWS) was developed. A superb catalytic performance for sulfamethoxazole (SMX) degradation (∼100.0%) was obtained within 30 min in FeCoNCWS800/PMS system at 60 °C. Besides, the reactive oxygen species (ROS) contribution was verified at different reaction temperatures. Specifically, the primary roles of sulfate and hydroxyl radicals (SO₄^- and OH) in SMX removal weakened, while the secondary role of singlet oxygen (¹O₂) in SMX degradation was enhanced with the rise of reaction temperature in FeCoNCWS800/PMS system. Interestingly, defects, graphitic N and carbonyl (CO) groups were vital active sites for PMS activation to produce ¹O₂, which was facilitated at higher reaction temperature. Besides, the metal sites were identified as PMS activators for SO₄^- and OH generation, which was promoted under lower reaction temperature. The findings revealed a novel internal temperature-dependent PMS activation mechanism, which can help to regulate the oxidation capacity of PMS activation system rationally for pollutant degradation.

Self-Assembled TMD Nanoparticles on N-Doped Carbon Nanostructures for Oxygen Reduction Reaction and Electrochemical Oxygen Sensing Thereof

Here, we report on a universal carbothermal reduction strategy for the synthesis of well-dispersed WS₂ nanoparticles (∼1.7 nm) supported on a N-doped carbon (N_xC) nanostructure and the electrocatalytic activity toward oxygen reduction reaction (ORR). Bulk WS₂ powder (2 μm) is the source for WS₂ nanoparticles, and dicyandiamide is the source for N_xC and carbothermal reduction. Interestingly, WS₂/N_xC serves the purpose of innovative and robust active sites for ORR through an efficient four-electron transfer process with excellent durability. Remarkably, WS₂/N_xC suppresses the peroxide generation due to the dominating inner-sphere electron transfer mechanism where the direct adsorption of the desolvated O₂ molecule on the electroactive centers takes place. The mass activity (at 0.4 and 0.85 V vs RHE) of WS₂/N_xC outperforms the previously reported transition metal based electrocatalysts. The study further establishes a correlation between the work function and the ORR activity. We have also exploited WS₂/N_xC for electrochemical oxygen sensing, and there exists a direct correlation between oxygen sensing and ORR as both depend on the oxygen adsorption ability. Finally, the carbothermal reduction strategy has been extended for the synthesis of other TMDs/N_xC such as MoS₂/N_xC, MoSe₂/N_xC, and WSe₂/N_xC.

Novel Fe2.55Sb2 alloy nanoparticles incorporated in N-doped carbon as a bifunctional oxygen electrocatalyst for rechargeable Zn–air batteries

Novel Fe2.55Sb2 alloy nanoparticles are incorporated in N-doped carbon as bifunctional oxygen electrocatalyst for rechargeable Zn-air battery.

Red Bean Pod Derived Heterostructure Carbon Decorated with Hollow Mixed Transition Metals as a Bifunctional Catalyst in Zn-Air Batteries

Design and synthesis of low-cost and efficient bifunctional catalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in Zn-air batteries are essential and challenging. We report a facile method to synthesize heterostructure carbon consisting of graphitic and amorphous carbon derived from the agricultural waste of red bean pods. The heterostructure carbon possesses a large surface area of 625.5 m²  g^-1 , showing ORR onset potential of 0.89 V vs. RHE and OER overpotential of 470 mV at 5 mA cm^-2 . Introducing hollow FeCo nanoparticles and nitrogen dopant improves the bifunctional catalytic activity of the carbon, delivering ORR onset potential of 0.93 V vs. RHE and OER overpotential of 360 mV. Electron energy-loss spectroscopy (EELS) O K-edge map suggests the presence of localized oxygen on the FeCo nanoparticles, suggesting the oxidation of the nanoparticles. Zn-air battery with these carbon-based catalysts exhibits a peak power density as high as 116.2 mW cm^-2 and stable cycling performance over 210 discharge/charge cycles. This work contributes to the advancement of bifunctional oxygen electrocatalysts while converting agricultural waste into value-added material.

Dimethylglyoxime Clathrate as Ligand Derived Nitrogen-Doped Carbon-Supported Nano-Metal Particles as Catalysts for Oxygen Reduction Reaction

Nitrogen-doped carbon-supported metal nano-particles show great promise as high-performance catalysts for novel energies, organic synthesis, environmental protection, and other fields. The synergistic effect between nitrogen-doped carbon and metal nano-particles enhances the catalytic properties. Thus, how to effectively combine nitrogen-doped carbon with metal nano-particles is a crucial factor for the synthesis of novel catalysts. In this paper, we report on a facile method to prepare nitrogen-doped carbon-supported metal nano-particles by using dimethylgly-oxime as ligand. The nano-particles of Pd, Ni, Cu, and Fe were successfully prepared by the pyrolysis of the corresponding clathrate of ions and dimethylglyoxime. The ligand of dimethylglyoxime is adopted as the source for the nitrogen-doped carbon. The nano-structure of the prepared Pd, Ni, Cu, and Fe particles are confirmed by X-ray diffraction, scanning electron microscopy, and trans-mission electron microscopy tests. The catalytic performances of the obtained metal nano-particles for oxygen reduction reaction (ORR) are investigated by cyclic voltammetry, Tafel, linear sweeping voltammetry, rotating disc electrode, rotating ring disc electrode, and other technologies. Results show that the nitrogen-doped carbon-supported metal nano-particles can be highly efficient catalysts for ORR. The results of the paper exhibit a facile methodology to prepare nitrogen-doped carbon-supported metal nano-particles.