Ammonia Storage in Hydrogen Bond-Rich Microporous Polymers

Advanced Materials for NH3 Capture: Interaction Sites and Transport Pathways

Ammonia (NH3) is a carbon-free, hydrogen-rich chemical related to global food safety, clean energy, and environmental protection. As an essential technology for meeting the requirements raised by such issues, NH3 capture has been intensively explored by researchers in both fundamental and applied fields. The four typical methods used are (1) solvent absorption by ionic liquids and their derivatives, (2) adsorption by porous solids, (3) ab-adsorption by porous liquids, and (4) membrane separation. Rooted in the development of advanced materials for NH3 capture, we conducted a coherent review of the design of different materials, mainly in the past 5 years, their interactions with NH3 molecules and construction of transport pathways, as well as the structure-property relationship, with specific examples discussed. Finally, the challenges in current research and future worthwhile directions for NH3 capture materials are proposed.

In-situ constructing porous N-doped carbon skeleton with rich defects from modified polyamide acid to boost the high performance of Na3V2(PO4)3 cathode for full sodium-ion batteries

Generally, the transport of electrons and Na+ is seriously constrained in Na3V2(PO4)3 (NVP) due to intense interactions of V-O and PO bonds. Besides, polyamide acid (PAA) is hardly used in the sol-gel route due to insolubility. This work develops a facile liquid synthesis strategy based on modified PAA, achieving in-situ construction of a porous N-doped carbon framework with rich defects to improve the kinetics of NVP. The addition of triethylamine (TEA) reacts with carboxyls in PAA to achieve acid-base neutralization, turning PAA into polyamide salts with good solubility. The special morphology construction mechanism of this unique system was observed by ex-situ scanning electron microscopy (SEM) and Transmission electron microscopy (TEM). Specifically, PAA undergoes in-situ conversion into chain-like polyimide (PI) through a thermal polymerization mechanism during the pre-sintering process. Meanwhile, NVP precursors are evenly dispersed in the PI fibers, efficiently reducing the particle size. After the final treatment, the favorable porous carbon skeleton could be generated derived from the partial decomposition of PI, on which small active grains are in situ grown. The resulting N-doped carbon substrate contains rich defects, benefiting from the migration of Na+. Furthermore, the porous construction is conducive to alleviating the stress and strain generated by the high current impact, increasing the contact area between electrodes/electrolytes to improve the utilization efficiency of active substances. Comprehensively, the optimized samples exhibit a capacity of 82.1 mAh g-1 at 15C with a retention rate of 95.45 % after 350 cycles. It submits a capacity of 67.6 mAh g-1 at 90C and remains 52.2 mAh g-1 after 1500 cycles. Even in full cells, it reveals a value of 110.6 mAh g-1. This work guides the application of in-situ multiple modifications of polymers in electrode materials.

Sulfonic acid functionalized monolithic column for high selectivity capillary electrochromatography separation

A new nano-scale spherical vinyl-functionalized covalent organic polymer (TAPT-DVA-COP) with uniform sizes around 300 nm was initially constructed using 2,5-divinyl-1,4-benzaldehyde (DVA) and 2,4,6-tris(4-aminophenyl)-1,3,5-triazine (TAPT) as monomers. Then, a sulfonic acid (-SO3H) modified COP termed COP-SO3H was developed based on post-sythesis method employing TAPT-DVA-COP as precursor. Capillary electrochromatography (CEC) monolithic columns were fabricated using the physical doping technique to exhibit the application potential of TAPT-DVA-COP and COP-SO3H. Compared to the TAPT-DVA-COP monolithic column, the COP-SO3H monolithic column achieved a highly selective separation between analytes with different properties, including monosubstituted benzenes, alkylbenzenes, hydroxybenzoates, nucleoside bases, and biogenic amines. Non-covalent interaction (NCI) analysis and experimental data show that the synergism of the sulfonic acid group and aromatic moieties on COP-SO3H endows the new stationary phase with diverse interactions, including ion exchange, hydrophobic, π-π and hydrogen bonding. In addition, the COP-SO3H monolithic column exhibited good reproducibility and excellent potential for the determination of hydroxybenzoates in compact powders and alkylbenzenes in effluent samples.

SHERPA: A Spectrometer with High Energy Resolution and Polarisation Analysis

SHERPA is a proposed quasielastic neutron spectrometer with polarisation analysis, intended to replace the ageing Iris instrument at the ISIS neutron and muon source. In this paper we present a concept of the instrument along with Monte-Carlo simulations and analysis of possible instrument location. We expect greatly increased count rate compared to Iris (expected from 49 to 660 × Iris) in unpolarised mode and dedicated polarisation analysis capabilities at a more modest count rate increase (~5-70 × Iris). This huge gain in the count rate would be achieved from the combination of three factors: modern neutron guide with high-m coating, and prismatic effect and larger solid angle coverage at the energy analyser. Such an instrument would be the first of its kind and has incredible potential to revolutionise quasielastic neutron scattering technique through the separation of the coherent and incoherent scattering contributions.