Gemini Thermotropic Smectic Liquid Crystals for Two-Dimensional Nanostructured Water-Treatment Membranes

Azaylide-based gemini amphiphiles displaying unique self-assembling behavior via an even-odd effect of alkyl linker chain length

Herein, we report a straightforward synthesis of azaylide-based gemini amphiphiles using bis(diphenylphosphino)alkanes via the Staudinger reaction. The prepared gemini amphiphiles exhibited an even-odd effect in their self-assembly behavior depending on the length of the alkyl linkers. Furthermore, the assembled micelles had high host capability toward hydrophobic guests in water.

Large-Scale, Vertically Aligned 2D Subnanochannel Arrays by a Smectic Liquid Crystal Network for High-Performance Osmotic Energy Conversion

The osmotic energy, an abundant renewable energy source, can be directly converted to electricity by nanofluidic devices with ion-selective membranes. 2D nanochannels constructed by nanosheets possess abundant lateral interfacial ion-exchange sites and exhibit great superiority in nanofluidic devices. However, the most accessible orientation of the 2D nanochannels is parallel to the membrane surface, undoubtedly resulting in the conductivity loss. Herein, first vertically aligned 2D subnanochannel arrays self-assembled by a smectic liquid crystal (LC) network that exhibit high-performance osmotic energy conversion are demonstrated. The 2D subnanochannel arrays are fabricated by in situ photopolymerization of monomers in the LC phase. The as-prepared membrane exhibits excellent water-resistance and mechanical strength. The 2D subnanochannels with excellent cation selectivity and conductivity show high-performance osmotic energy conversion. The power density reaches up to about 22.5 W m-2 with NaCl solution under a 50-fold concentration gradient, which is among with ultrahigh power density. This membrane design concept provides promising applications in osmotic energy conversion.

Self-Assembled and Polymerized Hierarchical Nanostructure Films of Cyanostilbene-Based Reactive AIEgens for Smart Chemosensors

For the development of acid-responsive advanced fluorescent films with a 2D nanostructure, a pyridyl cyanostilbene-based AIEgen (PCRM) is newly synthesized. The synthesized PCRM exhibits aggregation-induced emission (AIE) and responds reversibly to acid and base stimuli. To fabricate the nanoporous polymer-stabilized film, PCRM and 4-(octyloxy)benzoic acid (8OB) are complexed in a 1:1 ratio through hydrogen bonding. The PCRM-8OB complex with a smectic mesophase is uniaxially oriented at first and photopolymerized with a crosslinker. By subsequently removing 8OB in an alkaline solution, nanopores are generated in the self-assembled and polymerized hierarchical 2D nanostructure film. The prepared nanoporous fluorescent films exhibit not only the reversible response to acid and base stimuli but also mechanical and chemical robustness. Since the nanoporous fluorescent films have different sensitivities to trifluoroacetic acid (TFA) depending on the molecular orientation in the film, advanced acid vapor sensors that can display the risk level according to the concentration of TFA are demonstrated. Reactive AIEgens-based hierarchical nanostructure films with nanopores fabricated by a subsequent process of self-assembly, polymerization, and etching can open a new door for the development of advanced chemosensors.

Aquatic Functional Liquid Crystals: Design, Functionalization, and Molecular Simulation

Aquatic functional liquid crystals, which are ordered molecular assemblies that work in water environment, are described in this review. Aquatic functional liquid crystals are liquid-crystalline (LC) materials interacting water molecules or aquatic environment. They include aquatic lyotropic liquid crystals and LC based materials that have aquatic interfaces, for example, nanoporous water treatment membranes that are solids preserving LC order. They can remove ions and viruses with nano- and subnano-porous structures. Columnar, smectic, bicontinuous LC structures are used for fabrication of these 1D, 2D, 3D materials. Design and functionalization of aquatic LC sensors based on aqueous/LC interfaces are also described. The ordering transitions of liquid crystals induced by molecular recognition at the aqueous interfaces provide distinct optical responses. Molecular orientation and dynamic behavior of these aquatic functional LC materials are studied by molecular dynamics simulations. The molecular interactions of LC materials and water are key of these investigations. New insights into aquatic functional LC materials contribute to the fields of environment, healthcare, and biotechnology.

Photo-responsive nanoporous liquid crystal polymer films for selective dye adsorption

Photo-responsive nanoporous polymer films (AZOF-R(NC6)) have been developed by a template method based on a hydrogen-bonding supramolecular liquid crystal (LC) and a light-sensitive azobenzene LC crosslinker in this work. Anionic nanopores were obtained after the removal of template NC6 using KOH solution. The AZOF-R(NC6) demonstrates charge-selective dye adsorption and the maximum adsorption capacity for Rh6G is 504.6 mg g-1. The AZOF-R(NC6) film without UV light treatment shows a 32% higher adsorption capacity for Rh6G than the AZOF-R(NC6) film treated with UV light within the initial 10 min. In addition, UV light can trigger the release of the adsorbed dye from the polymer film due to the pore size change arising from the trans-cis isomerization. Besides, the used polymer film can be effectively regenerated using a HCl solution. Such functional polymer films with highly ordered nanopores and photo-responsive properties hold great promise in selective adsorption and mass separations.

Anhydrous proton conductor consisting of protamine-monododecyl phosphate composite with self-assembled structure

We prepared a protamine-monododecyl phosphate composite by mixing protamine (P) and a monododecyl phosphate (MDP). This P-MDP composite formed an acid-base complex by the electrostatic interaction between cationic protamine and the negatively charged phosphate group. Additionally, according to the X-ray diffraction (XRD) measurements, the composite formed a self-assembled lamellar structure with an interaction between the long alkyl chains of MDP. As a result, the P-MDP composite showed the proton conductivity of 9.5 × 10-4 S cm-1 at 120-130 °C under anhydrous conditions. Furthermore, the activation energy of the proton conduction of the P-MDP composite was approximately 0.18 eV. These results suggested that the proton conduction of the P-MDP composite was based on an anhydrous proton conductive mechanism. In contrast, the anhydrous proton conduction of the P-methanediphosphonic acid (MP) composite, which did not form the self-assembled lamellar structure, was ca. 3 × 10-5 S cm-1 at 120-130 °C and this value was one order of magnitude lower than that of the P-MDP composite. Therefore, the two-dimensional self-assembled proton conductive pathway of the P-MDP composite plays a role in the anhydrous proton conduction.

Reentrant 2D Nanostructured Liquid Crystals by Competition between Molecular Packing and Conformation: Potential Design for Multistep Switching of Ionic Conductivity

Reentrant phenomena in soft matter and biosystems have attracted considerable attention because their properties are closely related to high functionality. Here, we report a combined experimental and computational study on the self-assembly and reentrant behavior of a single-component thermotropic smectic liquid crystal toward the realization of dynamically functional materials. We have designed and synthesized a mesogenic molecule consisting of an alicyclic trans,trans-bicyclohexyl mesogen and a polar cyclic carbonate group connected by a flexible tetra(oxyethylene) spacer. The molecule exhibits an unprecedented sequence of layered smectic phases, in the order: smectic A-smectic B-reentrant smectic A. Electron density profiles and large-scale molecular dynamics simulations indicate that competition between the stacking of bicyclohexyl mesogens and the conformational flexibility of tetra(oxyethylene) chains induces this unusual reentrant behavior. Ion-conductive reentrant liquid-crystalline materials have been developed, which undergo the multistep conductivity changes in response to temperature. The reentrant liquid crystals have potential as new mesogenic materials exhibiting switching functions.

Ion Transport in 2D Nanostructured π-Conjugated Thieno[3,2-b]thiophene-Based Liquid Crystal

Leveraging the self-assembling behavior of liquid crystals designed for controlling ion transport is of both fundamental and technological significance. Here, we have designed and prepared a liquid crystal that contains 2,5-bis(thien-2-yl)thieno[3,2-b]thiophene (BTTT) as mesogenic core and conjugated segment and symmetric tetra(ethylene oxide) (EO4) as polar side chains for ion-conducting regions. Driven by the crystallization of the BTTT cores, BTTT/dEO4 exhibits well-ordered smectic phases below 71.5 °C as confirmed by differential scanning calorimetry, polarized optical microscopy, temperature-dependent wide-angle X-ray scattering, and grazing incidence wide-angle X-ray scattering (GIWAXS). We adopted a combination of experimental GIWAXS and molecular dynamics (MD) simulations to better understand the molecular packing of BTTT/dEO4 films, particularly when loaded with the ion-conducting salt lithium bis(trifluoromethanesulfonyl)imide (LiTFSI). Ionic conduction of BTTT/dEO4 is realized by the addition of LiTFSI, with the material able to maintain smectic phases up to r = [Li⁺]/[EO] = 0.1. The highest ionic conductivity of 8 × 10^-3 S/cm was attained at an intermedium salt concentration of r = 0.05. It was also found that ion conduction in BTTT/dEO4 is enhanced by forming a smectic layered structure with irregular interfaces between the BTTT and EO4 layers and by the lateral film expansion upon salt addition. This can be explained by the enhancement of the misalignment and configurational entropy of the side chains, which increase their local mobility and that of the solvated ions. Our molecular design thus illustrates how, beyond the favorable energetic interactions that drive the assembly of ion solvating domains, modulation of entropic effects can also be favorably harnessed to improve ion conduction.

Coatable 2D Conjugated Polymers Containing Bulky Macromolecular Guests for Thermal Imaging

Dynamic properties are derived from the structural flexibility of 2D polymers. Softening layered structures has the potential for tuning and enhancing the dynamic properties. In the present work, the flexibility of layered polydiacetylene (PDA) is tuned by the interlayer polymeric guests with different branching structures. PDA shows thermoresponsive color-change properties through shortening the effective conjugation length with molecular motion. Whereas the blue-to-red color transition is observed at certain threshold temperatures for the layered PDA without the interlayer guest, the intercalation of the bulky polymer guests lowers the starting temperature and widens the temperature range for the thermoresponsive color changes. The resultant layered composite of PDA and bulky polymer affords the homogeneous coating on substrates on the centimeter scale. The thermoresponsive color-change coating is applied to temperature-distribution imaging. The specific heat of liquids is colorimetrically estimated using the coating on the bottle. The coating on a silk cloth visualizes the temperature distribution on a simulated tissue during surgical operation using an ultrasonic coagulation cutting device. The coating can be applied to thermal imaging in a variety of fields. Moreover, the softening strategy contributes to explore dynamic properties of soft 2D materials.

Liquid-Crystalline Polymers: Molecular Engineering, Hierarchical Structures, and Applications

Liquid-crystalline polymers (LCPs) are a unique class of soft materials that combine liquid crystal and polymer characteristics. This perspective highlights recent advances of LCPs on the aspects of molecular engineering, hierarchical structures, and emerging applications. The strategy of sequence control in polymer synthesis has been introduced to tailor the primary structures of LCPs as well as their phases and orders. By incorporating mesogenic motifs rich in shape, order, and interaction into LCPs, novel bulk and interfacial structures on hierarchical scales are anticipated. The intrinsic features and fascinating properties of LCPs enable them to find potential applications in emerging areas including integrated circuits, lasing, environment, and energy, implying compelling opportunities for LCPs in fundamental science and transformative technologies.

Advanced Functional Liquid Crystals

Liquid crystals have been intensively studied as functional materials. Recently, integration of various disciplines has led to new directions in the design of functional liquid-crystalline materials in the fields of energy, water, photonics, actuation, sensing, and biotechnology. Here, recent advances in functional liquid crystals based on polymers, supramolecular complexes, gels, colloids, and inorganic-based hybrids are reviewed, from design strategies to functionalization of these materials and interfaces. New insights into liquid crystals provided by significant progress in advanced measurements and computational simulations, which enhance new design and functionalization of liquid-crystalline materials, are also discussed.

Removal of viruses from their cocktail solution by liquid-crystalline water-treatment membranes

Liquid-crystalline (LC) water-treatment membranes obtained by in situ photopolymerization of ionic mesogenic monomers have been shown to efficiently remove viruses. In our previous works, bicontinuous cubic (Cub_bi) and smectic (Sm) LC membranes prepared from ionic taper- and rod-shaped polymerizable mesogens, respectively, were used for this purpose. Here, we report the results of virus removal by columnar (Col) LC water-treatment membranes having ionic nanochannels obtained from ionic taper-shaped mesogens. These effects are compared with those obtained for Cub_bi membranes. The effects of these Col and Cub_bi LC ionic membranes on the removal of several viruses from their cocktail solution are also examined.

Nanostructured polymer membranes were prepared from ionic liquid-crystalline (LC) monomers with taper-shaped mesogens. The virus removal properties of the ionic 1D channels prepared from a columnar (Col) LC phase were examined. In addition, as the first approach for LC membranes, the removal of several viruses from their cocktail solution by the 1D channels of Col membrane and 3D channels of bicontinuous cubic membrane was also studied.

Anisotropic Dyes Adsorption by Templated Smectic Nanoporous Polymer Films: Pore Size vs Pore Charges Affecting the Adsorption

Selective 2-dimentional (2D) nanoporous polymer films have been developed by a templating method based on hydrogen-bonding supramolecular liquid crystals (LCs) containing benzoic acid and pyridine groups (6OBA·NC6·C6H). The smectic lamellar...