Dual-Modal Immunosensor with Functionalized Gold Nanoparticles for Ultrasensitive Detection of Chloroacetamide Herbicides

Smartphone-enabled colorimetric immunoassay for deoxynivalenol based on Mn2+-mediated aggregation of AuNPs

Deoxynivalenol (DON) is a common mycotoxin in food that mainly pollutes grain crops and feeds, such as barley, wheat and corn. DON has caused widespread concern in the field of food and feed safety. In this study, a colorimetric immunoassay was proposed based on the aggregation of gold nanoparticles (AuNPs) due to the decomposition of Mn2+ from gold-coated manganese dioxide (AuNP@MnO2) nanosheets. In this study, 2-(dihydrogen phosphate)-l-ascorbic acid (AAP) was hydrolyzed by alkaline phosphatase (ALP) and converted to ascorbic acid (AA). Then, AuNP@MnO2 was reduced to Mn2+ and AuNPs aggregation occurred. Using the unique optical characteristics of AuNPs and AuNP@MnO2, visible color changes realized simple detection of DON with high sensitivity and portability. With increasing DON content, the color changed more obviously. To quantitatively detect DON, pictures can be taken and the blue value can be read by a smartphone. The detection limit (Ic10) of this method was 0.098 ng mL-1, which was 326 times higher than that of traditional competitive ELISA, and the detection range was 0.177-6.073 ng mL-1. This method exhibited high specificity with no cross-reaction in other structural analogs. The average recovery rate of DON in corn flour samples was 89.1 %-110.2 %, demonstrating the high accuracy and stability of this assay in actual sample detection. Therefore, the colorimetric immunoassay can be used for DON-related food safety monitoring.

Plasmonic colorimetry and G-quadruplex fluorescence-based aptasensor: A dual-mode, protein-free and label-free detection for OTA

G-quadruplexes (G4) have received significant attention in the field of aptasensors owing to their unique physicochemical characteristics. A dual-mode, protein-free and label-free aptamer sensor based on plasmonic colorimetry and G4 fluorescence (PC@GF-aptasensor) was proposed for ochratoxin A (OTA). Colorimetry mode was achieved through the surface plasmon resonance (SPR) effect, which related to the OTA-Apt-based G4-OTA. The fluorescence mode was reflected by the insertion of thioflavin T (ThT) into G4-OTA. The OTA could be interpreted via three readouts: (1) naked eye (LOD of 2.0 ng mL-1), (2) smartphone (LOD of 1.65 ng mL-1), and (3) spectrofluorometer (LOD of 0.93 ng mL-1). The PC@GF-aptasensor exhibited several advantages, such as a standardised recognition group, simplified operation, low background signal, and practicality. The proposed PC@GF-aptasensor integrated SPR-based multicolour interpretation and ThT-inserted fluorescence reflection to obtain a dual-mode optical biosensor, which may provide valuable insights for the development of other targets with G4-based aptamers.

Dual-Mode Fluorescent/Intelligent Lateral Flow Immunoassay Based on Machine Learning Algorithm for Ultrasensitive Analysis of Chloroacetamide Herbicides

Given the harmful effect of pesticide residues, it is essential to develop portable and accurate biosensors for the analysis of pesticides in agricultural products. In this paper, we demonstrated a dual-mode fluorescent/intelligent (DM-f/DM-i) lateral flow immunoassay (LFIA) for chloroacetamide herbicides, which utilized horseradish peroxidase-IgG conjugated time-resolved fluorescent nanoparticle probes as both a signal label and amplification tool. With the newly developed LFIA in the DM-f mode, the limits of detection (LODs) were 0.08 ng/mL of acetochlor, 0.29 ng/mL of metolachlor, 0.51 ng/mL of Propisochlor, and 0.13 ng/mL of their mixture. In the DM-i mode, machine learning (ML) algorithms were used for image segmentation, feature extraction, and correlation analysis to obtain multivariate fitted equations, which had high reliability in the regression model with R2 of 0.95 in the range of 2 × 102-2 × 105 pg/mL. Importantly, the practical applicability was successfully validated by determining chloroacetamide herbicides in the corn sample with good recovery rates (85.4 to 109.3%) that correlate well with the regression model. The newly developed dual-mode LFIA with reduced detection time (12 min) holds great potential for pesticide monitoring in equipment-limited environments using a portable test strip reader and laboratory conditions using ML algorithms.

Scalable synthesis of Au@CeO2 nanozyme for development of colorimetric lateral flow immunochromatographic assay to sensitively detect heart-type fatty acid binding protein

Nanozymes with core@shell nanostructure are considered promising biolabeling materials for their multifunctional properties. In this work, a simple one-pot strategy has been proposed for scalable synthesis of gold@cerium dioxide core@shell nanoparticles (Au@CeO2 NPs) with strong localized surface plasmon resonance (LSPR) absorption and high peroxidase-like catalytic activity by redox reactions of Ce3+ ions and AuCl4- ions in diluted ammonia solution under room temperature. A colorimetric lateral flow immunochromatographic assay (LFIA) has been successfully fabricated for sensitive detection of heart-type fatty acid binding protein (H-FABP, an early cardiac biomarker) by using the Au@CeO2 NPs as reporters. The as-developed LFIA with Au@CeO2 NP reporter (termed as Au@CeO2-LFIA) exhibits a dynamic range of nearly two orders of magnitude, and a limit of detection (LOD) as low as 0.35 ng mL-1 H-FABP with nanozyme-triggered 3,3',5,5'-tetramethylbenzidine (TMB) colorimetric amplification. Furthermore, the practicality of Au@CeO2-LFIA has been demonstrated by profiling the concentrations of H-FABP in 156 blood samples of acute myocardial infarction (AMI) patients, and satisfactory results are obtained.

A smartphone-based enhanced colorimetric immunoassay for the detection of Trichinella spiralis infection

Trichinellosis is a serious foodborne and zoonotic parasitic disease caused by Trichinella family. At present, the main on-site detection method for Trichinella spiralis (T. spiralis) infection is the lateral flow assay (LFA). Other diagnostic techniques for this parasite cannot be applied to on-site testing due to their reliance on special instruments. Here, we established an ELISA smartphone-based method for detecting anti-T. spiralis antibodies in pig serum. The use of horseradish peroxidase-labeled goat anti-pig IgG-modified gold nanoparticle (AuNPs@HRP-IgG) effectively increased the sensitivity of the method. The entire reaction was carried out at room temperature without the need for special instruments. A low-cost and portable device for imaging and processing experimental data was also developed. Validation analysis revealed that the specificity of the test was 98.89 %, while its sensitivity was 100.00 %. T. spiralis antibodies could be detected in pig serum beginning at 25 dpi after infection with the muscle larvae. This visual immunosensor facilitates on-site detection of T. spiralis, especially in regions lacking specialized laboratory equipment.

Dual-mode colorimetric and fluorescence biosensors for the detection of foodborne bacteria

Due to the growing demand for detection technologies, there has been significant interest in the development of integrated dual-modal sensing technologies, which involve combining two signal transduction channels into a single technique, particularly in the context of food safety. The integration of two detection signals not only improves diagnostic performance by reducing assumptions, but also enhances diagnostic functions with increased application flexibility, improved accuracy, and a wider detection linear range. The top two output signals for emerging dual-modal probes are fluorescent and colorimetric, due to their exceptional advantages for real-time sensitive sensing and point-of-care applications. With the rapid progress of nanotechnology and material chemistry, the integrated colorimetric/fluorimetric dual-mode systems show immense potential in sensing foodborne pathogenic bacteria. In this comprehensive review, we present a detailed summary of various colorimetric and fluorimetric dual-modal sensing methods, with a focus on their application in detecting foodborne bacteria. We thoroughly examine the sensing methodologies and the underlying principles of the signal transduction systems, and also discuss the challenges and future prospects for advancing research in this field.

Gold nanoparticle-mediated fluorescence immunoassay for rapid and sensitive detection of Ochratoxin A

In this work, a fluorescence immunoassay based on horseradish peroxidase-labeled IgG (HRP-IgG)-modified gold nanoparticle (AuNP@HRP-IgG) probe was established for detection of ochratoxin A (OTA). Through the catalysis of HRP, the dopamine (DA) and 1,5-dihydroxynaphthalene (DHA) can rapidly generate azamonardine fluorescence compound (AFC) with intense yellow fluorescence. Large amounts of AFC can be formed within 4 min, which led to fluorescence enhancement at 545 nm. This new method displayed high sensitivity with a limit of detection (LOD) of 0.18 ng/mL and a linear range of 0.78-200 ng/mL for OTA. Meanwhile, the recoveries of OTA in corn samples were 101.41% - 113.45%. Due to the universality of the probe and the rapidity of signal output, the fluorescence immunoassay allowed rapid and sensitive detection of targets.

Alkaline phosphatase triggered gold nanoclusters turn-on fluorescence immunoassay for detection of Ochratoxin A

Ochratoxin A (OTA) is a highly toxic mycotoxin which can cause a variety of diseases. Sensitive detection of OTA is significant for food safety. Herein, a feasible and sensitive immunoassay was established for OTA detection by alkaline phosphatase (ALP) triggered gold nanoclusters (AuNCs) turn-on fluorescence. The fluorescence of the AuNCs can be quenched by Cr6+ induced aggregation of AuNCs and the fluorescence resonance energy transfer (FRET) between AuNCs and Cr6+. Under the catalytic action of ALP-labelled IgG (IgG-ALP), the ascorbic acid 2-phosphate (AA2P) was hydrolyzed to ascorbic acid (AA) for the reducing of Cr6+ to Cr3+. As a result, the degrees of AuNCs aggregation and FRET were weakened and the fluorescence of AuNCs was turned on. The amount of OTA in the sample was negatively correlated with the amount of IgG-ALP captured by anti-OTA monoclonal antibody (McAb) in the microplate. In optimal conditions, the turn-on fluorescence immunoassay had a good linear range of 6.25-100 ng/mL, and the detection limit was 0.693 ng/mL. The recoveries of OTA from corn were 95.89%-101.08% for the fluorescence immunoassay. This work provided a feasible, sensitive and good selectivity fluorescence method for OTA detection.

A lateral flow immunoassay method for the rapid detection of acetochlor and alachlor in vegetable oil by sensitivity enhancement by using dimethyl-β-cyclodextrin

Acetochlor is an endocrine disruptor. The acetochlor residue is strongly lipophilic and can be enriched into products during the manufacturing process. In this study, we found that dimethyl-β-cyclodextrin (DM-β-CD) solution could decrease the apparent oil/water partition coefficient (Koil-w) of acetochlor and increase the sensitivity of fluorescence lateral flow immunoassay (LFIA) for acetochlor simultaneously. Based on this, a simple LFIA method for the determination of acetochlor and alachlor residues in vegetable oil was established. The detection process only involves vortex mixing of an oil sample and dimethyl-β-cyclodextrin solution in a 1 : 3 (V/V) ratio, loading the water phase onto the immunoassay strips and reading the results. Under optimized conditions, the LOD for acetochlor in oil was 3.53 ng g-1, and the working range was 12.03-2000.00 ng g-1. The recoveries of spiked samples ranged from 91.69% ± 1.12% to 112.23% ± 2.20%. Meanwhile, the cross reactivity for alachlor was 108.22%, while for other investigated acetochlor analogues it was less than 1%, and the recoveries of alachlor were from 92.90% ± 8.03% to 113.53% ± 3.40%, which indicate that this method can detect acetochlor and alachlor simultaneously. Compared with the traditional detection method, the pre-treatment process of the proposed method is "green" and simple, and can be applied to the on-site rapid detection of acetochlor and alachlor in vegetable oil and can provide inspiration for the detection of other lipophilic pollutants.

One-pot synthesis of AuPt@FexOy nanoparticles with excellent peroxidase-like activity for development of ultrasensitive colorimetric lateral flow immunoassay of cardiac troponin I

Detection of cardiac troponin I (cTnI) plays a critical role in diagnosing acute myocardial infarction (AMI). In this report, a new kind of spherical AuPt@FexOy core@shell nanoparticles (termed as AuPt@FexOy NPs) were one-pot synthesized by a redox interaction-engaged strategy (RIES) without the addition of any surfactants or reducing agents. The as-synthesized AuPt@FexOy NPs not only retain the plasmonic activity of gold nanoparticles (AuNPs), but also possess excellent catalytic activities of platinum nanoparticles (PtNPs) and FexOy nanoclusters. The features of AuPt@FexOy NPs enable greatly enhance the colorimetric detection sensitivity of lateral flow immunoassay (LFIA) through integrating AuPt@FexOy NPs labeling procedure and catalyzing oxidation of chromogenic substrate 3,3',5,5'-tetramethylbenzidine (TMB) signal amplification strategy. The as-developed colorimetric LFIA (termed as AuPt@FexOy-LFIA) exhibits the limit of detection (LOD) as 26.0 pg mL-1 cTnI under the TMB signal amplification mode. In particular, the detection results of cTnI in 40 clinical seral samples by AuPt@FexOy-LFIA are correlated well with those of cTnI in the same samples by commercial enzyme-linked immunosorbent assay (ELISA) detection kit (R2 = 0.97, slope = 1), demonstrating the highly reliable analytical performance and good application prospect of AuPt@FexOy-LFIA.

Overview on the Development of Alkaline-Phosphatase-Linked Optical Immunoassays

The drive to achieve ultrasensitive target detection with exceptional efficiency and accuracy requires the advancement of immunoassays. Optical immunoassays have demonstrated significant potential in clinical diagnosis, food safety, environmental protection, and other fields. Through the innovative and feasible combination of enzyme catalysis and optical immunoassays, notable progress has been made in enhancing analytical performances. Among the kinds of reporter enzymes, alkaline phosphatase (ALP) stands out due to its high catalytic activity, elevated turnover number, and broad substrate specificity, rendering it an excellent candidate for the development of various immunoassays. This review provides a systematic evaluation of the advancements in optical immunoassays by employing ALP as the signal label, encompassing fluorescence, colorimetry, chemiluminescence, and surface-enhanced Raman scattering. Particular emphasis is placed on the fundamental signal amplification strategies employed in ALP-linked immunoassays. Furthermore, this work briefly discusses the proposed solutions and challenges that need to be addressed to further enhance the performances of ALP-linked immunoassays.

Fluorescence and Colorimetric Analysis of African Swine Fever Virus Based on the RPA-Assisted CRISPR/Cas12a Strategy

It is well-established that different detection modes are necessary for corresponding applications, which can effectively reduce matrix interference and improve the detection accuracy. Here, we reported a magnetic separation method based on recombinase polymerase amplification (RPA)-assisted clustered regularly interspaced short palindromic repeats (CRISPR)/Cas12a for dual-mode analysis of African swine fever virus (ASFV) genes, including colorimetry and fluorescence. The ASFV gene was selected as the initial RPA template to generate the amplicon. The RPA amplicon was then recognized by CRISPR-associated RNA (crRNA), activating the trans-cleavage activity of Cas12a and leading to the nonspecific cleavage of ssDNA as well as a significant release of alkaline phosphatase (ALP) in the ALP-ssDNA modified magnetic bead. The released ALP can catalyze para-nitrophenyl phosphate to generate para-nitrophenol, resulting in substantial changes in absorbance and fluorescence, both of which can be used for detection with the naked eye. This strategy allows the sensitive detection of ASFV DNA, with a 20 copies/mL detection limit; no cross-reactivity with other viruses was observed. A good linear relationship was obtained in serum. In addition, this sensor displayed 100% specificity and sensitivity for clinical sample analysis. This method integrates the high sensitivity of fluorescence with easy readout of colorimetry and enables a simple, low-cost, and highly sensitive dual-mode detection of viral nucleic acid, thereby providing a broad prospect for the practical application in the diagnosis of virus infection.

Fluorescence ratio immunoassay for fumonisin B1 based on the oxidase characteristics of the growth of monodispersed 2-D MnO2 nanosheet on an individual gold nanoparticle (AuNP@MnO2)

Fumonisin B1 (FB1) is one of the important mycotoxins posing health risks in the area of food safety. A sensitive fluorescence ratio immunoassay has been established for FB1 based on the growth of monodispersed 2-D MnO₂ nanosheet on an individual gold nanoparticle (AuNP@MnO₂). FB1 competed with the coated FB1-BSA to bind the FB1 monoclonal antibody. After a washing step, alkaline phosphatase-labeled goat anti-mouse IgG (ALP-IgG) with high catalytic activity was combined with FB1 monoclonal antibody. ALP reacts with ascorbic acid 2-phosphate (AAP) to produce ascorbic acid (AA), which decomposes AuNP@MnO₂ to dehydroascorbic acid (DHAA). O-Phenylenediamine dihydrochloride (OPD) is oxidized to yellow-fluorescent substrate of 2,3-diaminophenazine (DAP) (excitation, 423 nm; emission, 570 nm) by AuNP@MnO₂. Meanwhile, OPD can also be reduced to blue fluorescent substrate of OPDred (excitation, 350 nm; emission, 430 nm) by DHAA. The content of FB1 can be determined by fluorescence ratio of blue/yellow. The limit of detection (LOD) of the fluorescence ratio immunoassay for FB1 was 0.06 ng mL^-1, and the linear range was from 0.25 to 60.00 ng mL^-1. The effectiveness of the assay was verified in real maize samples, and satisfactory recoveries were attained. The correlation coefficient of these results between the fluorescence ratio immunoassay and commercial ELISA kit was 0.9999. This method provides a sensitive and selective tool for the detection of FB1 in maize samples.

Fluorescence immunosensor based on functional nanomaterials and its application in tumor biomarker detection

An immunosensor is defined as an analytical device that detects the binding of an antigen to its specific antibody by coupling an immunochemical reaction to the surface of a device called a transducer. Fluorescence immunosensing is one of the most promising immunoassays at present, and has the advantages of simple operation, fast response and high stability. A traditional fluorescence immunosensor often uses an enzyme-labelled antibody as a recognition unit and an organic dye as a fluorescence probe, so it is easily affected by environmental factors with low sensitivity. Nanomaterials have unique photostability, catalytic properties and biocompatibility, which open up a new path for the construction of stable and sensitive fluorescence immunosensors. This paper briefly introduces different kinds of immunosensors and the role of nanomaterials in the construction of immunosensors. The significance of fluorescent immunosensors constructed from functional nanomaterials to detect tumor biomarkers was analyzed, and the strategies to further improve the performance of fluorescent immunosensors and their future development trend were summarized.

Prototype Digital Lateral Flow Sensor Using Impact Electrochemistry in a Competitive Binding Assay

This work demonstrates a lateral flow assay concept on the basis of stochastic-impact electrochemistry. To this end, we first elucidate requirements to employ silver nanoparticles as redox-active labels. Then, we present a prototype that utilizes nanoimpacts from biotinylated silver nanoparticles as readouts to detect free biotin in solution based on competitive binding. The detection is performed in a membrane-based microfluidic system, where free biotin and biotinylated particles compete for streptavidin immobilized on embedded latex beads. Excess nanoparticles are then registered downstream at an array of detection electrodes. In this way, we establish a proof of concept that serves as a blueprint for future "digital" lateral flow sensors.

Gold Tablets: Gold Nanoparticles Encapsulated into Dextran Tablets and Their pH-Responsive Behavior as an Easy-to-Use Platform for Multipurpose Applications

Many applications using gold nanoparticles (AuNPs) require (i) their functionalization with a biopolymer to increase their stability and (ii) their transformation into an easy-to-handle material, which provide them with specific properties. In this research, a portable tablet platform is presented based on dextran-encapsulated gold nanoparticles (AuNPs-dTab) by a ligand exchange reaction between citrate-capped gold nanoparticles (AuNPs-Cit) and dextran. These newly fabricated tablets were characterized utilizing ultraviolet-visible spectroscopy (UV-vis), Fourier transform infrared spectroscopy-attenuated total reflectance (FTIR-ATR), transmission electron microscopy (TEM), dynamic light scattering (DLS), X-ray diffraction spectroscopy (XRD), differential scanning calorimetry (DSC), and atomic force microscopy (AFM) techniques. The results showed that dextran-capped gold nanoparticles in a tablet platform (AuNPs-dTab) were well-dispersed and highly stable for at least a year at room temperature. In addition to particle and surface characterization of AuNPs-dTab, the tablet morphology in terms of thickness, diameter, density, and opacity was also measured using 6 and 10% dextran with 2, 4 and 8 nM AuNPs-Cit. We further investigated the pH-responsive behavior of AuNPs-dTab in the presence and absence of sodium chloride. Results showed that neutral and alkaline environments were suitable to render AuNPs dispersed in a tablet, while an acidic condition controls the aggregation rate of AuNPs as confirmed by concentration-dependent aggregation phenomena. Besides the easy fabrication, these tablets were portable and low-cost (approx. 1.22 CAD per 100 tablets of a 100 μL solution of dextran-capped gold nanoparticles (AuNPs-dSol)). The biocompatible nature of dextran along with the acidic medium trigger nature of AuNPs makes our proposed tablet a potential candidate for cancer therapy due to the acidic surrounding of tumor tissues as compared to normal cells. Also, our proposed tablet approach paves the way for the fabrication of portable and easy-to-use optical sensors based on the AuNPs embedded in a natural polymeric architecture that would serve as a colorimetric recognition indicator for detecting analytes of interest.

Micro-/Mesoporous Fluorescent Polymers and Devices for Visual Pesticide Detection with Portability, High Sensitivity, and Ultrafast Response

The residue of pesticides in crops, soil, and water continues to be a widespread concern due to the threat to human health and food safety. With the aim to develop highly sensitive sensing materials and portable detection devices, two dicarbazole-based fluorescent micro-/mesoporous polymers (JYs) with a larger specific surface area and pore sizes ranging from 1.1 to 34.2 nm are synthesized. The Stern-Volmer constants of JY fluorescence quenching for imidacloprid (50,063 M^-1) exceed 23-51 times those of the reported porous organic polymers (980-2173 M^-1). Of particular interest is the observation that JYs show rapid fluorescence response (2 s) and ultralow detection limit (30 ppb) for imidacloprid in water medium. The pronounced chemsensing property is attributed to the synergistic role of the hierarchical pore structure, large π-conjugation of chromophore groups, and strong inner filter effect between the polymer and imidacloprid molecule. Moreover, the pesticide detection of JYs exhibits good interference resistance in complicated service environments such as the extract liquids of the apple peel and field soil as well as aqueous solutions of various cations and anions. Because of the portability, excellent reusability, and sensitive fluorescence response, the prepared JYs and detection devices have promising applications in the on-site monitoring and early warning of the pesticide residues.

Detection of monoamine oxidase B using dark-field light scattering imaging and colorimetry

Detection of MAO-B using dark-field light scattering imaging and colorimetry based on localized surface plasmon resonance induced by silver deposited gold nanostars.

Duplex-Specific Nuclease-Triggered Fluorescence Immunoassay Based on Dual-Functionalized AuNP for Acetochlor, Metolachlor, and Propisochlor

Given the great harm of pesticide residues to the environment and public health, exploring ultrasensitive and low-cost methods for their quantitative analysis becomes intensely necessary. Herein, we proposed a double-functionalized gold nanoparticle (AuNP) probe as a signal amplification immunoassay for the detection of acetochlor (ATC), metolachlor, and propisochlor. The AuNP was modified with IgG and fluorophore-labeled duplex DNA by a polyadenine-based freezing method. The quenched fluorescence can be effectively recovered via duplex-specific nuclease (DSN) with excellent cleaving activity. This approach provided limits of detection (LODs) down to 0.03 ng/mL for ATC, 0.10 ng/mL for metolachlor, 0.14 ng/mL for propisochlor, and 0.08 ng/mL for their mixture. The average recoveries of ATC, metolachlor, and propisochlor were 93.0-106.6% from a corn sample, which are in good agreement with the commercial kit (R² = 0.9995). This "turn-off" fluorescence immunoassay presents considerable potential in the analysis of chloroacetamide herbicide due to its simple process of probe preparing and ultrahigh sensitivity.

Development of a gold-nanorod-based lateral flow immunoassay for a fast and dual-modal detection of C-reactive protein in clinical plasma samples

Fast and simple detection of C-reactive protein (CRP) is highly significant for the diagnosis and prognosis of inflammatory or infectious diseases. Lateral flow immunoassay has the advantages of rapid detection, simple operation and low cost, but it is usually limited by the quantitative ability and speed of data extraction. Herein, a gold-nanorod-based lateral flow immunoassay was developed to rapidly detect CRP by simultaneously monitoring the colorimetric and temperature signals. In this method, anti-CRP antibody-modified gold nanorods (GNRs) were designed as colorimetric and photothermal conversion probes. A mouse anti-CRP monoclonal antibody and goat anti-mouse IgG were used as test and control lines, respectively. Then, a lateral flow immunochromatographic strip was constructed by a sandwich-type method for detecting CRP by introducing antibody-modified GNRs, and this procedure needed less than 15 min. Finally, the detection signals can be directly observed by eyes and directly read using a thermal imager. The as-synthesized GNR showed high photothermal conversion efficiency (η = 39%) and strong localized surface plasmon resonance (LSPR) absorption. For CRP detection, the proposed immunochromatographic strip exhibited good specificity, high sensitivity, good linearity within the range of 50–10 000 ng mL⁻¹ and a low limit of detection (LOD, 1.3 ng mL⁻¹). This method was successfully applied for CRP detection in clinical plasma samples, and it correlated very well with the diagnostic kit of immunoturbidimetry (r = 0.96). The results indicated that the developed GNR-based immunochromatographic strip has immense potential for use as a rapid and cost-effective in vitro diagnostic kit.

A gold-nanorod-based lateral flow immunoassay for rapid and quantitative detection of CRP by simultaneously monitoring the colorimetric and temperature signals.