Electron-Donating C-NH2 Link Backbone for Highly Alkaline and Mechanical Stable Anion Exchange Membranes

"Fishbone" Design of Amino/N-Spirocyclic Cations toward High-Performance Poly(triphenylene piperidine) Anion-Exchange Membranes for Fuel Cells

N-Spirocyclic cations have excellent alkali resistance stability, and precise design of the structure of N-spirocyclic anion-exchange membranes (AEMs) improves their comprehensive performance. Here, we design and synthesize high-performance poly(triphenylene piperidine) membranes based on the "fishbone" design of amino/N-spirocyclic cations. The "fishbone" design does not disrupt the overall stabilized conformation but promotes a microphase separation structure, while exerting the synergistic effect of piperidine cations and spirocyclic cations, resulting in a membrane with good conductivity and alkali resistance stability. The hydroxide conductivity of the QPTPip-ASU-X membrane reached up to 133.5 mS cm-1 at 80 °C. The QPTPip-ASU-15 membrane was immersed in a 2 M NaOH solution at 80 °C for 1200 h, and the conductivity was maintained at 91.02%. In addition, the QPTPip-ASU-5 membrane had the highest peak power density of 255 mW cm-2.

Semi-interpenetrating anion exchange membranes using hydrophobic microporous linear poly(ether ketone)

In order to realise high ionic conductivity and improved chemical stability, a series of anion exchange membranes (AEMs) with semi-interpenetrating polymer network (sIPN) has been prepared via the incorporation of crosslinked poly(biphenyl N-methylpiperidine) (PBP) and spirobisindane-based intrinsically microporous poly(ether ketone) (PEK-SBI). The formation of phase separated structures as a result of the incompatibility between the hydrophilic PBP network and the hydrophobic PEK-SBI segment, has successfully promoted the hydroxide ion conductivity of AEMs. A swelling ratio (SR) as low as 12.2 % at 80 °C was recorded for the sIPN containing hydrophobic PEK-SBI as the linear polymer and crosslinked structure with a mass ratio of PBP to PEK-SBI of 90/10 (sIPN-90/10_(PEK-SBI)). The sIPN-90/10_(PEK-SBI) AEM achieved the highest hydroxide ion conductivity of 122.4 mS cm^-1 at 80 °C and a recorded ion exchange capacity (IEC) of 2.26 meq g^-1. Atomic force microscopy (AFM) and transmission electron microscopy (TEM) clearly revealed the improved phase separation structure of sIPN-90/10_(PEK-SBI). N₂ adsorption isotherm indicated that the Brunauer-Emmett-Teller (BET) surface area of the AEMs increased with the increase of microporous PEK-SBI content. Interestingly, the sIPN-90/10_(PEK-SBI) AEM showed good alkaline stability for being able to maintain a conductivity of 94.7 % despite being soaked in a 1 M sodium hydroxide solution at 80 °C for 30 days. Meanwhile, a peak power density of 481 mW cm^-2 can be achieved by the hydrogen/oxygen single cell using sIPN-90/10_(PEK-SBI) as the AEM.

Bacterial coculture enhanced Cd sorption and As bioreduction in co-contaminated systems

The bacterial interactions that regulate Cd sorption and As bioreduction in co-contaminated systems are poorly understood. We isolated two bacterial strains, i.e., Pseudomonas aeruginosa and Bacillus licheniformis from a Cd and As co-contaminated soil and compared the effects of monoculture and coculture on microbial Cd sorption and As bioreduction efficiency in the media with different Cd (0, 0.5, 5, 10, 50, 100 mg/L) and As(Ⅴ) (0, 90 mg/L) concentrations. Compared with monoculture, the bacterial coculture increased the Cd sorption efficiency by up to 32% and the As bioreduction (As(Ⅴ) to As(Ⅲ)) efficiency by up to 28%, associated with the increased abundance of As reduction gene arsB. Based on SEM-TEM and metabolomics, the enhanced efficiency was attributed to bacterial interactions, supported by the differential secretion of extracellular polymeric substances. Notably, the differential lipids and lipid-like molecules, and organoheterocyclic compounds resulted from bacterial interactions compared to monoculture exhibited the highest Cd sorption and As bioreduction. The increased efficiencies by bacterial coculture were verified by soil incubation experiments. These results provide insight on applying specific bacterial coculture and their metabolites to enhance Cd sorption and As bioreduction in effective and sustainable remediation of co-contaminated environments.

Anion-exchange membrane water electrolyzers and fuel cells

The key components, working management, and operating techniques of anion-exchange membrane water electrolyzers and fuel cells are reviewed for the first time.

Engineered Thin Diffusion Layers for Anion-Exchange Membrane Electrolyzer Cells with Outstanding Performance

Anion-exchange membrane electrolyzer cells (AEMECs) are one of the most promising technologies for carbon-neutral hydrogen production. Over the past few years, the performance and durability of AEMECs have substantially improved. Herein, we report an engineered liquid/gas diffusion layer (LGDL) with tunable pore morphologies that enables the high performance of AEMECs. The comparison with a commercial titanium foam in the electrolyzer indicated that the engineered LGDL with thin-flat and straight-pore structures significantly improved the interfacial contacts, mass transport, and activation of more reaction sites, leading to outstanding performance. We obtained a current density of 2.0 A/cm² at 1.80 V with an efficiency of up to 81.9% at 60 °C under 0.1 M NaOH-fed conditions. The as-achieved high performance in this study provides insight to design advanced LGDLs for the production of low-cost and high-efficiency AEMECs.

Polybenzimidazole Ultrathin Anion Exchange Membrane with Comb-Shape Amphiphilic Microphase Networks for a High-Performance Fuel Cell

A comb-shape amphiphilic cationic side chain is proposed to well-balance the water sorption in anion exchange membranes (AEMs), in which the cationic group is in between of an ether-containing hydrophilic spacer and an alkyl hydrophobic spacer. By fully grafting the amphiphilic side chains onto polybenzimidazole (PBI), comb-shape amphiphilic microphase networks are well-developed in the AEMs, in which the alkyl hydrophobic network greatly restricts water swelling and the ether-containing hydrophilic network keeps the hydration of the cationic groups and enlarges the ion conductive channel. The as-prepared membranes achieve a high conductivity of about 91.2 mS cm^-1, an extremely low swelling ratio of about 8.1% at 80 °C, and good mechanical properties at a hydrated state (tensile strength and elongation at a break of about 14.6 MPa and 77.5%, respectively). Benefits from the balanced water sorption in AEMs, the H₂/O₂ fuel cell with a 10 μm ultrathin membrane could withstand 80 °C and 0.1 MPa back pressure and achieve a high open circuit voltage of about 1.0 V and a high peak power density of about 631.5 mW cm^-2. This work provides a new insight into the design of high-performance AEM.