High-Performance and Reliable Silver Nanotube Networks for Efficient and Large-Scale Transparent Electromagnetic Interference Shielding

A novel strategy to prepare high performance multifunctional composite films by combining electrostatic assembly, crosslinking, topology enhancement and sintering

Currently, polymer-fiber composite films face the challenge of striking a balance between good mechanical properties and multi-functionalities. Here, aramid fibers (ANFs), chitosan (CS) dendritic particles, and silver nanowires (AgNWs) were used to create high-performance multifunctional composite films. AgNWs and polymer dendritic particles form an interpenetrating segregated network that ensures both a continuous conductive filler and a polymer network. Electrostatic assembly eliminates repulsion between negatively charged ANFs, cross-linked CS particles generate a stable three-dimensional network, and a "brick-mortar" structure composed of multiple materials contributes to topological enhancement. Sintering encourages local overlap and fusing of the AgNWs while reducing their internal flaws. Based on the above strategy, these films achieve a strength of 306.5 MPa, a toughness of 26.5 MJ m-3, and a conductivity of 392 S cm-1. Density functional theory (DFT) and Comsol simulations demonstrate that the introduction of CS thin layers leads to strong hydrogen bonds and three-dimensional continuous conductive networks. With its outstanding mechanical and electrical properties, the AgNW@ANF/CS-CH film demonstrates excellent electromagnetic shielding (22 879.1 dB cm2 g-1) and Joule heating (70 °C within 10 s) capabilities. This work presents a novel approach to fabricate high-performance conductive films and expand their potential applications in lightweight wearable electronics and electrothermal therapy.

High-Performance Transparent Ultrabroadband Electromagnetic Radiation Shielding from Microwave toward Terahertz

In the era of fifth-generation networks and Internet-of-Things, the use of multiband electromagnetic radiation shielding is highly desirable for next-generation electronic devices. Herein, we report a systematic exploration of optoelectronic behaviors of ultrathin-silver-based shielding prototype (USP) film structures at the nanometer scale, unlocking the transparent ultrabroadband electromagnetic interference (EMI) shielding from microwave to terahertz frequencies. A theoretical model is proposed to optimize USP structures to achieve increased transparency, whereby optical antireflection resonances are introduced in dielectrics in conjunction with remarkable EMI shielding capability. USP can realize a state-of-the-art effective electromagnetic radiation shielding bandwidth with measured frequencies from 8 GHz up to 2 THz. Experimental results show that a basic USP (dAg = 10 nm) offers an average shielding efficiency of ∼27.5 dB from the X- to Ka-bands (8-40 GHz) and maintains a stable shielding performance of ∼22.6 dB across a broad range of 0.5-2 THz, with a measured optical transmittance of ∼95.2%. This extraordinary performance of ultrathin-silver-based film structures provides a new ultrabroadband EMI shielding paradigm for potential applications in next-generation electronics.

Transparent and high-performance electromagnetic interference shielding composite film based on single-crystal graphene/hexagonal boron nitride heterostructure

The multiple requirements of optical transmittance, high shielding effectiveness, and long-term stability bring considerable challenge to electromagnetic interference (EMI) shielding in the fields of visualization windows, transparent optoelectronic devices, and aerospace equipment. To this end, attempts were hereby made, and based on high-quality single crystal graphene (SCG)/hexagonal boron nitride (h-BN) heterostructure, transparent EMI shielding films with weak secondary reflection, nanoscale ultra-thin thickness and long-term stability were finally realized by a composite structure. In this novel structure, SCG was adopted as the absorption layer, while sliver nanowires (Ag NWs) film acted as the reflection layer. These two layers were placed on different sides of the quartz to form a cavity, which achieved the dual coupling effect, so that the electromagnetic wave was reflected multiple times to form more absorption loss. Among the absorption dominant shielding films, the composite structure in this work demonstrated stronger shielding effectiveness of 28.76 dB with a higher light transmittance of 80.6%. In addition, under the protection of the outermost h-BN layer, the decline range of the shielding performance of the shielding film was extensively reduced after 30 days of exposure to air and maintained long-term stability. Overall, this study provides an outstanding EMI shielding material with great potential for practical applications in electronic devices protection.

Flexible, Transparent, and Hazy Composite Cellulosic Film with Interconnected Silver Nanowire Networks for EMI Shielding and Joule Heating

An optical transparent and hazy film with admirable flexibility, electromagnetic interference (EMI) shielding, and Joule heating performance meeting the requirements of optoelectronic devices is significantly desirable. Herein, a cellulose paper was infiltrated by epoxy resin to fabricate a transparent cellulose paper (TCP) with high transparency, optical haze, and favorable flexibility, owing to effective light scattering and mechanical enhancement of the cellulose network. Moreover, a highly connected silver nanowire (AgNW) network was constructed on the TCP substrate by the spray-coating method and appropriate thermal annealing technique to realize high electrical conductivity and favorable optical transmittance of the composite film at the same time, followed by coating of a polydimethylsiloxane (PDMS) layer for protection of the AgNW network. The obtained PDMS/AgNWs/TCP composite film features considerable optical transmittance (up to 86.8%) and haze (up to 97.7%), while satisfactory EMI shielding effectiveness (SE) (up to 39.1 dB, 8.2-12.4 GHz) as well as strong mechanical strength (higher than 41 MPa) were achieved. The coated PDMS layer prevented the AgNW network from falling off and ensured the long-term stability of the PDMS/AgNWs/TCP composite film under deformations. In addition, the multifunctional PDMS/AgNWs/TCP composite film also exhibited excellent Joule heating performance with low supplied voltages, rapid response, and sufficient stability. This work demonstrates a novel pathway to improve the performance of multifunctional transparent composite films for future advanced optoelectronic devices.

MXene/Polylactic Acid Fabric-Based Resonant Cavity for Realizing Simultaneous High-Performance Electromagnetic Interference (EMI) Shielding and Efficient Energy Harvesting

Proliferation in telecommunications and integrated/intelligent devices entails an intense concern for electromagnetic interference (EMI) shielding and versatility. It remains an activated passion to launch infusive EMI shielding materials integrated with self-powered peculiarities. Herein, a double-layered MXene/polylactic acid (PLA) fabric resonance cavity (D-MPF-RC) comprised of two MXene/PLA fabrics (MPFs) with alternating MXene and PLA structures that are separated by a poly(tetrafluoroethylene) (PTFE) frame is developed. The D-MPF-RC achieved 48.5 and 74.8% improvement in SE_T and SE_A, and 24.6% reduction in SE_R by introducing the double-layered structure and increasing the resonance cavity (RC) distance without varying the material composition and cost. A high shielding efficiency (SE) of 92.3 dB was obtained at an RC distance of 6 mm owing to the synergetic effects of multiple reflections and destructive EM wave interference. The tribopolarity difference between PLA and MXene and the RC structure made the D-MPF-RC a readily available triboelectric nanogenerator (TENG) that could convert mechanical energy into electricity. The D-MPF-RC TENG demonstrated an open-circuit voltage of 88 V and achieved a peak power density of 35.4 mW m^-2 on a 6.6 MΩ external resistor, which made it possible to charge capacitors and serve as a self-powered tactile sensor. This report offers new insights into the design of high-performance EMI shielding shields with a resonance cavity and proposes a feasible pathway to integrate them with energy harvesting capabilities.

Structural Design Strategies of Polymer Matrix Composites for Electromagnetic Interference Shielding: A Review

With the widespread application of electronic communication technology, the resulting electromagnetic radiation pollution has been significantly increased. Metal matrix electromagnetic interference (EMI) shielding materials have disadvantages such as high density, easy corrosion, difficult processing and high price, etc. Polymer matrix EMI shielding composites possess light weight, corrosion resistance and easy processing. However, the current polymer matrix composites present relatively low electrical conductivity and poor EMI shielding performance. This review firstly discusses the key concept, loss mechanism and test method of EMI shielding. Then the current development status of EMI shielding materials is summarized, and the research progress of polymer matrix EMI shielding composites with different structures is illustrated, especially for their preparation methods and evaluation. Finally, the corresponding key scientific and technical problems are proposed, and their development trend is also prospected.