Highly Effective Trapping-Conversion Interface Based on Nickel-Modified Versatile Carbon Skeleton Enabled High-Performance Li-S Battery

"Wane and wax" strategy: Enhanced evolution kinetics of liquid phase Li2S4 to Li2S via mutually embedded CNT sponge/Ni-porous carbon electrocatalysts

The lithium-sulfur battery (Li-S) has been considered a promising energy storage system, however, in the practical application of Li-S batteries, considerable challenges remain. One challenge is the low kinetics involved in the conversion of Li2S4 to Li2S. Here, we reveal that highly dispersed Ni nanoparticles play a unique role in the reduction of Li2S4. Ni-porous carbon (Ni-PC) decorated in situ on a free-standing carbon nanotube sponge (CNTS/Ni-PC) enriches the current response of liquid phase Li2S4 and Li2S2 around the cathode more than 8.1 and 5.7 times higher than that of the CNTS blank sample, respectively, greatly boosting the kinetics and decreasing the reaction overpotential of Li2S4 reduction (lower Tafel slope and larger current response). Thus, with the same total overpotential, more space is provided for the concentration difference overpotential, allowing the more soluble polysulfide intermediates farther away from the surface of the conductive materials to be reduced based on the "wane and wax" strategy, and significantly improving the sulfur utilization. Consequently, S@CNTS/Ni-PC delivers excellent rate performance (812.4 mAh·g-1 at 2C) and a remarkable areal capacity of 10.1 mAh·cm-2. This work provides a viable strategy for designing a target catalyst to enhance the conversion kinetics in the Li2S4 reduction process.

Interface Engineering Toward Expedited Li2 S Deposition in Lithium-Sulfur Batteries: A Critical Review

Lithium-sulfur batteries (LSBs) with superior energy density are among the most promising candidates of next-generation energy storage techniques. As the key step contributing to 75% of the overall capacity, Li₂ S deposition remains a formidable challenge for LSBs applications because of its sluggish kinetics. The severe kinetic issue originates from the huge interfacial impedances, indicative of the interface-dominated nature of Li₂ S deposition. Accordingly, increasing efforts have been devoted to interface engineering for efficient Li₂ S deposition, which has attained inspiring success to date. However, a systematic overview and in-depth understanding of this critical field are still absent. In this review, the principles of interface-controlled Li₂ S precipitation are presented, clarifying the pivotal roles of electrolyte-substrate and electrolyte-Li₂ S interfaces in regulating Li₂ S depositing behavior. For the optimization of the electrolyte-substrate interface, efforts on the design of substrates including metal compounds, functionalized carbons, and organic compounds are systematically summarized. Regarding the regulation of electrolyte-Li₂ S interface, the progress of applying polysulfides catholytes, redox mediators, and high-donicity/polarity electrolytes is overviewed in detail. Finally, the challenges and possible solutions aiming at optimizing Li₂ S deposition are given for further development of practical LSBs. This review would inspire more insightful works and, more importantly, may enlighten other electrochemical areas concerning heterogeneous deposition processes.

Ni3Sn2/nitrogen-doped graphene composite with chemisorption and electrocatalysis as advanced separator modifying material for lithium sulfur batteries

Lithium-sulfur batteries have been widely studied because of their advantages of abundant reserves, environmental friendliness, low cost andhighspecific capacity. However, the volume expansionand the low electrical conductivity of sulfur, and the shuttle effect of polysulfides limit their application. Herein,wesynthesizea two-dimensional layered Ni₃Sn₂/nitrogen-doped graphene (NG) composite asseparator modifying material for lithium-sulfur batteries. The Ni₃Sn₂formed by dual metal salts Ni(NO₃)₂·6H₂O and SnCl₂·2H₂O can adsorb polysulfide and catalyze its transformation to improve the electrochemical reaction kinetics. Moreover, the layered NG can not only disperse the Ni₃Sn₂particles, but alsoensure rapid electron transfer. Therefore, the lithium-sulfur battery with the Ni₃Sn₂/NG modified separator shows excellent electrochemical performance. At a current rate of 1 C, the lithium-sulfur battery with the Ni₃Sn₂/NG modified separator can provide a high initial discharge capacity of 1022.1 mAh g^-1and maintain a reversible specific capacity of 758.3 mAh g^-1after 400 cycles.

Ni3FeN functionalized carbon nanofibers boosting polysulfide conversion for Li–S chemistry

Limiting the shuttle effect of polysulfides is an important means to realizing high energy density lithium–sulfur batteries (Li–S).

Rational Design of β-NiOOH Nanosheet-Sheathed CNTs as a Highly Efficient Electrocatalyst for Practical Li-S Batteries

The shuttle effects of polysulfide intermediates (LiPSs) and sluggish kinetics during sulfur reduction reaction (SRR) process severely exacerbate the electrochemical performances of Li-S batteries. Herein, a unique nanocatalyst comprising β-NiOOH nanosheets uniformly implanted on the surface of carbon nanotubes (CNT@NiOOH) was designed and synthesized for sulfur cathodes. The β-NiOOH nanosheets have great capability of adsorbing LiPSs as well as superior catalytic activity for accelerating LiPS conversion, providing a more efficient method to restrain shuttle effects and improve the kinetics of SRR. Moreover, the nanometer-scale epitaxial growth and uniform distribution of β-NiOOH on CNTs provide a multidimensional catalytic skeleton with sufficient accessible active surfaces, unimpeded LiPS diffusion pathways, and resultant high utilization of active sites. Simultaneously, stable electron transportation pathways are also obtained by being synthesized on CNTs to avoid the faultiness of poor electron conductivity of β-NiOOH. These conspicuous advantages contribute to fully exert the catalytic and LiPS anchoring potential of CNT@NiOOH, bringing about the ultralong cycle performance and excellent capacity reversibility at a high discharge rate. Reticular CNT@NiOOH frameworks are assembled with the sulfur composite materials (SCMs) by a self-assembly method, and a super-high capacity of 813.3 mA h g^-1 after 400 cycles at 0.5 C with a small capacity degradation of 0.07% per cycle is achieved. Furthermore, the 3 A h pouch-type cell with the SCM/CNT@NiOOH cathode attains a super-high energy density of about 320 W h kg^-1 and shows a superior capacity retention as high as 75.9% after 50 cycles at 0.2 C. This work provides a promising method to accelerate the SRR process and restrain the shuttle effects for practical long-life and high-capacity Li-sulfur batteries.

Ni@Ni3N Embedded on Three-Dimensional Carbon Nanosheets for High-Performance Lithium/Sodium-Sulfur Batteries

Lithium-sulfur (Li-S) batteries are recognized as one of the most promising next-generation energy storage devices, but their practical application is greatly limited by several obstacles, such as the highly insulating nature and sluggish redox kinetics of sulfur and the dissolution of lithium polysulfides. Herein, three-dimensional carbon nanosheet frameworks anchored with Ni@Ni₃N heterostructure nanoparticles (denoted Ni@Ni₃N/CNS) are designed and fabricated by a chemical blowing and thermal nitridation strategy. It is demonstrated that the Ni@Ni₃N heterostructure can effectively accelerate polysulfide conversion and promote the chemical trapping of polysulfides. Meanwhile, the carbon nanosheet frameworks of Ni@Ni₃N/CNS establish a highly conductive network for fast electron transportation. The cells with Ni@Ni₃N heterostructures as the catalyst in the cathode show excellent electrochemical performance, revealing stable cycling over 600 cycles with a low-capacity fading rate of 0.04% per cycle at 0.5 C and high-rate capability (594 mAh g^-1 at 3 C). Furthermore, Ni@Ni₃N/CNS can also work well in room-temperature sodium-sulfur (RT-Na/S) batteries, delivering a high specific capacity (454 mAh g^-1 after 400 cycles at 0.5 C). This work provides a rational way to prepare the metal-metal nitride heterostructures to enhance the performance both of Li-S and RT-Na/S batteries.