Shape Memory Poly(β-hydroxythioether) Foams for Oil Remediation in Aquatic Environments

Recent Progress of Non-Isocyanate Polyurethane Foam and Their Challenges

Polyurethane foams (PUFs) are a significant group of polymeric foam materials. Thanks to their outstanding mechanical, chemical, and physical properties, they are implemented successfully in a wide range of applications. Conventionally, PUFs are obtained in polyaddition reactions between polyols, diisoycyanate, and water to get a CO₂ foaming agent. The toxicity of isocyanate has attracted considerable attention from both scientists and industry professionals to explore cleaner synthesis routes for polyurethanes excluding the use of isocyanate. The polyaddition of cyclic carbonates (CCs) and polyfunctional amines in the presence of an external blowing agent or by self-blowing appears to be the most promising route to substitute the conventional PUFs process and to produce isocyanate-free polyurethane foams (NIPUFs). Especially for polyhydroxyurethane foams (PHUFs), the use of a blowing agent is essential to regenerate the gas responsible for the creation of the cells that are the basis of the foam. In this review, we report on the use of different blowing agents, such as Poly(methylhydrogensiloxane) (PHMS) and liquid fluorohydrocarbons for the preparation of NIPUFs. Furthermore, the preparation of NIPUFs using the self-blowing technique to produce gas without external blowing agents is assessed. Finally, various biologically derived NIPUFs are presented, including self-blown NIPUFs and NIPUFs with an external blowing agent.

Preparation of polymer-based foam for efficient oil-water separation based on surface engineering

The leakages of a large number of organic solvents and oil spills not only cause extensive economic losses, but also destroy the ecological environment. However, there were few studies on the surface engineering of adsorption materials for efficient oil-water separation in complex environments. In this research, through surface engineering, the polymer-based foam exhibited high efficiency oil-water separation performance in different pH environments. Hydrophobic groups were introduced onto the surface of nano-sized SiO₂ particles via hydrolysis and polycondensation reactions, and then the modified SiO₂ was loaded on the foam. After modification, the water contact angle of the modified foam increased from 116.4° to 152.5°, and the oil-water separation performance was obviously enhanced. The oil removal rate of the modified foam remained above 96%. The highest capacity of petroleum diesel was 33.4 g^-1, which was much higher than other similar adsorption materials. In addition, the modified foam maintained good hydrophobicity and oil removal rate in a wide pH range. The efficient oleophilic and hydrophobic foam prepared by combining green physical foaming with surface engineering was expected to be widely used in large-scale organic solvent recovery and oil leakage emergency treatment.