General Strategy to Fabricate Porous Co-Based Bimetallic Metal Oxide Nanosheets for High-Performance CO Sensing

Metal-organic framework-derived metal oxides for resistive gas sensing: a review

Gas sensors with exceptional sensitivity and selectivity are vital in the real-time surveillance of noxious and harmful gases. Despite this, traditional gas sensing materials still face a number of challenges, such as poor selectivity, insufficient detection limits, and short lifespan. Metal oxides, which are derived from metal-organic framework materials (MOFs), have been widely used in the field of gas sensors because they have a high surface area and large pore volume. Incorporating metal oxides derived from MOFs into gas sensors can improve their sensitivity and selectivity, thus opening up new possibilities for the development of innovative, high-performance gas sensors. This article examines the gas sensing process of metal oxide semiconductors (MOS), evaluates the advances made in the research of different structures of MOF-derived metal oxides in resistive gas sensors, and provides information on their potential applications and future advancements.

A controllable surface etching strategy for MOF-derived porous ZnCo2O4@ZnO/Co3O4 oxides and their sensing properties

Here, we report a surface etching strategy for the controllable synthesis of metal-organic framework (MOF)-derived ZnCo2O4@ZnO/Co3O4 oxides. Different from previous studies, ZnCo-glycolate (ZnCo-gly) spheres acted as sacrificial templates to provide Zn2+ and Co2+ ions, which coordinated with 2-MeIm to form Zeolitic Imidazolate Frameworks (ZIFs) on the surface of ZnCo-gly. A series of characterizations were employed to clarify the evolution of the surface etching strategy. Interestingly, the ZIF thickness of the ZnCo-gly surface could be controlled by adjusting the reaction time. After calcination, p-n heterojunctions were formed between the MOF-derived ZnO and Co3O4, which made it show excellent selectivity to methanal gas.

A Co-based MOF as nanozyme with enhanced oxidase-like activity for highly sensitive and selective colorimetric differentiation of aminophenol isomers

Nanozyme with the merit of excellent and adjustable catalytic activity, outstanding stability and low cost is a promising alternative for natural enzymes widely applied in a variety of fields. In the present study, a new two-dimensional cobalt-based MOF nanocomposite designated as MVCM@β-CD was synthesized. Combined with the strategies of increasing the ratio of Co(Ⅲ)/Co(Ⅱ) and modifying with small molecule β-cyclodextrin (β-CD), MVCM@β-CD displayed remarkably enhanced oxidase-mimicking activity, which was attributed to synergistic effect from large surface area of two dimensional Co-MOF nanosheet, numerous exposed active sites, high-proportioned trivalence of cobalt and regulating action of β-cyclodextrin. The addition of aminophenol isomers inhibited the catalytic oxidation process, resulting in different color change of the solution and UV-Vis absorption behaviors, based on which a sensitive ratiometric colorimetry for m-aminophenol (m-Ap) and a simple colorimetric p-aminophenol (p-Ap) detection method were developed with the detection limit of 0.16 μM and 1.01 μM, respectively. This method realized the colorimetric differentiation of aminophenol isomers, which provided a simple, accurate and low-cost approach for visual discrimination without complicated instrument and procedure, especially appropriate for on-site detection.

Highly Efficient Electrochemical Sensing of Acetaminophen by Cobalt Oxide-Embedded Nitrogen-Doped Hollow Carbon Spheres

With respect to sensor application investigations, hollow mesoporous carbon sphere-based materials of the spinel type of cobalt oxide (Co₃O₄) and heteroatom-doped materials are gaining popularity. In this contribution, dopamine hydrochloride (DA) and cobalt phthalocyanine (CoPc) precursors were employed to construct a highly homogeneous Co₃O₄-embedded N-doped hollow carbon sphere (Co₃O₄@NHCS) by a straightforward one-step polymerization procedure. The resulting Co₃O₄@NHCS materials may effectively tune the surface area, defect sites, and doping amount of N and Co elements by altering the loading amount of CoPc. The relatively high surface area, greater spherical wall thickness, enriched defect sites, and better extent of N and Co sites are all visible in the best 200 mg loaded Co₃O₄@NHCS-2 material. This leads to significant improvement in pyridine and graphitic N site concentrations, which offers exceptional electrochemical performance. Electrochemical analysis was used to study the electrocatalytic activity of Co₃O₄@NHCSs towards the sensing of pharmacologically active significant compounds (acetaminophen). Excellent sensor properties include the linear range (0.001-0.2 and 1.0-8.0 mM), sensitivity, limit of detection (0.07 and 0.11 μM), and selectivity in the modified Co₃O₄@NHCSs/GCE. The authentic sample (acetaminophen tablet) produces a satisfactory result when used practically.

Oriented Design of Transition-Metal-Oxide Hollow Multishelled Micropolyhedron Derived from Bimetal-Organic Frameworks for the Electrochemical Detection of Multipesticide Residues

Transition-metal oxides (TMOs) with a hollow multishelled structure have emerged as highly potential materials for high-performance electrochemical sensing, benefiting from their superior electronic conductivity, exceptionally large specific surface area, excellent stability, and electrochemistry properties. In particular, binary TMOs are expected to outperform unitary TMOs due to the synergistic effect of the different metals. Herein, MnCo₂O_4.5 hollow quadruple-shelled porous micropolyhedrons (MnCo₂O_4.5 HoQS-MPs) were prepared and employed to construct an ultrasensitive sensing platform for a multipesticide assay. Profiting from complex hollow interior structures and abundant active sites, the MnCo₂O_4.5 HoQS-MPs manifest outstanding electrochemical properties as electrode materials for the pesticide assay. The MnCo₂O_4.5 HoQS-MP-based biosensor demonstrated remarkable performance for monocrotophos, methamidophos, and carbaryl detection, with wide linear ranges, as well as low detection limits. This work unveils a new pathway for the ultrasensitive detection of pesticides and demonstrates tremendous potential for detecting other environmentally deleterious chemicals.

Adsorption and Degradation of Volatile Organic Compounds by Metal-Organic Frameworks (MOFs): A Review

Volatile organic compounds (VOCs) are a major threat to human life and health. The technologies currently used to remove VOCs mainly include adsorption and photocatalysis. Adsorption is the most straightforward strategy, but it cannot ultimately eliminate VOCs. Due to the limited binding surface, the formaldehyde adsorption on conventional photocatalysts is limited, and the photocatalytic degradation efficiency is not high enough. By developing novel metal-organic framework (MOF) materials that can catalytically degrade VOCs at room temperature, the organic combination of new MOF materials and traditional purification equipment can be achieved to optimize adsorption and degradation performance. In the present review, based on the research on the adsorption and removal of VOCs by MOF materials in the past 10 years, starting from the structure and characteristics of MOFs, the classification of which was described in detail, the influencing factors and mechanisms in the process of adsorption and removal of VOCs were summarized. In addition, the research progress of MOF materials was summarized, and its future development in this field was prospected.

Active W Sites Promoted by Defect Engineering Enhanced C2H6S3 Sensing Performance of WO3 Nanosheets

Defect engineering has received extensive attention as an effective method to tune the gas sensing properties of semiconductor materials. Here, defective WO₃ (D-WO₃) nanosheets were obtained by a simple hydrogenation process with a detection limit as low as 5 ppb for dimethyl trisulfide (DMTS) and a response of 2.3 times that of the initial WO₃ nanosheets to 100 ppb DMTS. Importantly, X-ray photoelectron spectroscopy and Raman spectroscopy confirmed the partial loss of oxygen atoms in D-WO₃ nanosheets, and density functional theory calculations found that the W sites near the oxygen defect showed higher adsorption energy for DMTS and transferred more electrons during the gas interaction, indicating that the active W site caused by oxygen atom loss can effectively enhance the reactivity of two-dimensional WO₃ nanosheets. Different from the traditional oxygen defect model, this work reveals the positive effect of active metal sites on gas sensing for the first time, which is expected to provide an effective reference for the sensing application of defect engineering in metal oxides.

2D materials: increscent quantum flatland with immense potential for applications

Quantum flatland i.e., the family of two dimensional (2D) quantum materials has become increscent and has already encompassed elemental atomic sheets (Xenes), 2D transition metal dichalcogenides (TMDCs), 2D metal nitrides/carbides/carbonitrides (MXenes), 2D metal oxides, 2D metal phosphides, 2D metal halides, 2D mixed oxides, etc. and still new members are being explored. Owing to the occurrence of various structural phases of each 2D material and each exhibiting a unique electronic structure; bestows distinct physical and chemical properties. In the early years, world record electronic mobility and fractional quantum Hall effect of graphene attracted attention. Thanks to excellent electronic mobility, and extreme sensitivity of their electronic structures towards the adjacent environment, 2D materials have been employed as various ultrafast precision sensors such as gas/fire/light/strain sensors and in trace-level molecular detectors and disease diagnosis. 2D materials, their doped versions, and their hetero layers and hybrids have been successfully employed in electronic/photonic/optoelectronic/spintronic and straintronic chips. In recent times, quantum behavior such as the existence of a superconducting phase in moiré hetero layers, the feasibility of hyperbolic photonic metamaterials, mechanical metamaterials with negative Poisson ratio, and potential usage in second/third harmonic generation and electromagnetic shields, etc. have raised the expectations further. High surface area, excellent young's moduli, and anchoring/coupling capability bolster hopes for their usage as nanofillers in polymers, glass, and soft metals. Even though lab-scale demonstrations have been showcased, large-scale applications such as solar cells, LEDs, flat panel displays, hybrid energy storage, catalysis (including water splitting and CO₂ reduction), etc. will catch up. While new members of the flatland family will be invented, new methods of large-scale synthesis of defect-free crystals will be explored and novel applications will emerge, it is expected. Achieving a high level of in-plane doping in 2D materials without adding defects is a challenge to work on. Development of understanding of inter-layer coupling and its effects on electron injection/excited state electron transfer at the 2D-2D interfaces will lead to future generation heterolayer devices and sensors.

Exposed Mo atoms induced by micropores enhanced H2S sensing of MoO3 nanoflowers

It is well known that the metal atoms of metal oxide semiconductor (MOS) exhibit significant activity in gas sensing. However, limited by the shielding effect of the outer oxygen atom layer, layered MoO₃ is often difficult to show ideal gas adsorption activity. Hence, the MoO₃ microporous nanoflowers (MPNFs) assembled by porous two-dimensional nanosheets were successfully synthesized and exhibited excellent gas sensing performance to H₂S, and the response was 7.2 times higher than that of simple MoO₃ nanosheets. The abundant pores of MoO₃ MPNFs were due to the influence of the crystal cell shrinkage effect on the atomic arrangement, while the significantly enhanced gas sensing performance was attributed to the positive effect of the microporous structure on gas diffusion and the exposed edge Mo atoms. This was confirmed by DFT calculation results that, compared to the Mo atoms on the surface of MoO₃ nanosheets, the Mo atoms around the pores were exposed because they broke through the shielding effect of the oxygen atom layer and exhibited higher adsorption activity for H₂S and O₂ molecules. Therefore, this work can shed a light on the design of high-performance gas sensors based on metal oxides.

Multiple Strategies to Fabricate a Highly Stable 2D CuIICuI-Organic Framework with High Proton Conductivity

Using multifunctional organic ligands with multiple acidic groups (carboxylate and sulfonate groups) to synthesize metal-organic frameworks (MOFs) bearing effective H-bond networks is a promising strategy to obtain highly proton conductive materials. In this work, a highly stable two-dimensional MOF, [Cu^II₅Cu^I₂(μ₃-OH)₄(H₂O)₆(L)₂(H₂L)₂]·3H₂O (denoted as YCu161; H₃L = 6-sulfonaphthalene-1,4-dicarboxylic acid) containing mixed-valence [Cu^II₅Cu^I₂(μ₃-OH)₄]⁸⁺ subunits, was successfully prepared. It exhibited excellent stability and temperature- and humidity-dependent proton conduction properties. Its optimal proton conductivity reached 1.84 × 10^-3 S cm^-1 at 90 °C and 98% relative humidity. On the basis of a crystal structure analysis, water vapor adsorption test results, and activation energy calculations, we deduced the proton conduction pathway and mechanism. Apparently, uncoordinated sulfonic and carboxyl groups and a network of abundant H-bonds inside the framework were responsible for the efficient proton transfer. Therefore, the strategy of selecting suitable bifunctional ligands to construct two-dimensional Cu-cluster-based MOFs with excellent proton conductivity is feasible.

Recent Progress of Nanostructured Sensing Materials from 0D to 3D: Overview of Structure-Property-Application Relationship for Gas Sensors

Along with the progress of nanoscience and nanotechnology, nanomaterials with attractive structural and functional properties have gained more attention than ever before, especially in the field of electronic sensors. In recent years, the gas sensing devices have made great achievement and also created wide application prospects, which leads to a new wave of research for designing advanced sensing materials. There is no doubt that the characteristics are highly governed by the sensitive layers. For this reason, important advances for the outstanding, novel sensing materials with different dimensional structures including 0D, 1D, 2D, and 3D are reported and summarized systematically. The sensing materials cover noble metals, metal oxide semiconductors, carbon nanomaterials, metal dichalcogenides, g-C₃ N₄ , MXenes, and complex composites. Discussion is also extended to the relation between sensing performances and their structure, electronic properties, and surface chemistry. In addition, some gas sensing related applications are also highlighted, including environment monitoring, breath analysis, food quality and safety, and flexible wearable electronics, from current situation and the facing challenges to the future research perspectives.