Enhancing Visible-Light Photocatalysis via Endohedral Functionalization of Single-Walled Carbon Nanotubes with Organic Dyes

Single walled carbon nanotubes covalently functionalized by a ruthenium complex for photocatalytic oxidations

The covalent bonding of a ruthenium bipyridine complex derivative with the aromatic network of single walled carbon nanotubes (SWNT) through a stepwise protocol is presented, thus yielding the sample SWNT-Ru. To do that, an-amino decorated phenanthroline is bonded to the nanotube by means of the diazonium chemistry protocol, providing anchoring points for discrete organometallic units as depicted by the solid characterization techniques employed. The hybrid material, able to emit upon excitation, is active in the visible light-driven photocatalytic oxidation of organic sulfides to sulfoxides. SWNT-Ru presents a wide scope being able to convert more than 10 substrates with different characteristics, including added-value chemicals, with a stable performance over more than 6 cycles without metal leaching and enhanced activity compared to related homogeneous complexes. A versatile character is also demonstrated since this hybrid catalyst follows both possible photooxidation mechanisms.

Photocatalytic Cascade Cyclization of Aryl Haloalkynyl Ketones Forming Cyclopenta[b]naphthalene Derivatives

An efficient metal-free, photoredox-mediated cascade cyclization of aryl 1-haloalk-5-ynyl ketones has been developed. Using catalytic amounts of eosin Y (EY) and EtNMe₂ as a reductive quencher, various aryl 1-haloalk-5-ynyl ketones have been transformed into the corresponding cyclization products in up to 98% yield. As a result, synthetic access to differently α-functionalized cyclopenta[b]naphthones and direct construction of cyclopenta[b]naphtholes has been developed.

Spectroscopic Insights into the Influence of Filling Carbon Nanotubes with Atomic Nanowires for Photophysical and Photochemical Applications

Studying the optical performance of carbon nanotubes (CNTs) filled with guest materials can reveal the fundamental photochemical nature of ultrathin one-dimensional (1D) nanosystems, which are attractive for applications including photocatalysis. Here, we report comprehensive spectroscopic studies of how infiltrated HgTe nanowires (NWs) alter the optical properties of small-diameter (d _t < 1 nm) single-walled carbon nanotubes (SWCNTs) in different environments: isolated in solution, suspended in a gelatin matrix, and heavily bundled in network-like thin films. Temperature-dependent Raman and photoluminescence measurements revealed that the HgTe NW filling can alter the stiffness of SWCNTs and therefore modify their vibrational and optical modes. Results from optical absorption and X-ray photoelectron spectroscopy demonstrated that the semiconducting HgTe NWs did not provide substantial charge transfer to or from the SWCNTs. Transient absorption spectroscopy further highlighted that the filling-induced nanotube distortion can alter the temporal evolution of excitons and their transient spectra. In contrast to previous studies on functionalized CNTs, where electronic or chemical doping often drove changes to the optical spectra, we highlight structural distortion as playing an important role.

Asymmetric synthesis of cyclic β-amino carbonyl derivatives by a formal [3 + 2] photocycloaddition

Herein, a visible-light mediated strategy unlocking a family of cyclic β-amino carbonyl derivatives bearing three contiguous stereogenic centres is introduced. The overall reactivity relies on the performance of the substrate-catalyst complex to assist both the enantiocontrol and the photoredox tasks. This transformation led to an enantioselective [3 + 2] photocycloaddition between coordinated α,β-unsaturated acyl imidazoles and cyclopropylamine derivatives.

A well-defined S-g-C3N4/Cu-NiS heterojunction interface towards enhanced spatial charge separation with excellent photocatalytic ability: synergetic effect, kinetics, antibacterial activity, and mechanism insights

A well-defined heterojunction among two dissimilar semiconductors exhibited enhanced photocatalytic performance owing to its capability for boosting the photoinduced electron/hole pair transportation. Therefore, designing and developing such heterojunctions using diverse semiconductor-based materials to enhance the photocatalytic ability employing various approaches have gained research attention. For this objective, g-C3N4 is considered as a potential photocatalytic material for organic dye degradation; however, the rapid recombination rate of photoinduced charge carriers restricts the widespread applications of g-C3N4. Henceforth, in the current study, we constructed a heterojunction of S-g-C3N4/Cu-NiS (SCN/CNS) two-dimensional/one-dimensional (2D/1D) binary nanocomposites (NCs) by a self-assembly approach. XRD results confirm the construction of 22% SCN/7CNS binary NCs. TEM analysis demonstrates that binary NCs comprise Cu-NiS nanorods (NRs) integrated with nanosheets (NSs) such as the morphology of SCN. The observed bandgap value of SCN is 2.69 eV; nevertheless, the SCN/CNS binary NCs shift the bandgap to 2.63 eV. Photoluminescence spectral analysis displays that the electron-hole pair recombination rate in the SCN/CNS binary NCs is excellently reduced owing to the construction of the well-defined heterojunction. The photoelectrochemical observations illustrate that SCN/CNS binary NCs improve the photocurrent to ∼0.66 mA and efficiently suppress the electron-hole pairs when compared with that of undoped NiS, CNS and SCN. Therefore, the 22% SCN/7CNS binary NCs efficiently improved methylene blue (MB) degradation to 99% for 32 min under visible light irradiation.

Bi selectively doped SrTiO3-x nanosheets enhance photocatalytic CO2 reduction under visible light

Converting CO₂ into chemical energy by using solar energy is an environmental strategy to achieve carbon neutrality. In this paper, two dimensionality (2D) SrTiO_3-x nanosheets with oxygen vacancies were synthesized successfully. Oxygen vacancies will generate defect levels in the band structure of SrTiO_3-x. So, SrTiO_3-x nanosheets have good photocatalytic CO₂ reduction performance under visible light. In order to further improve its photocatalytic efficiency, Bi was used to dope Sr site and Ti site in SrTiO_3-x nanosheets respectively. It is found that Sr site is the adsorption site of CO₂ molecules. When Bi replaced Sr, CO₂ adsorption on the surface of SrTiO_3-x nanosheets was weakened. When Bi replaced Ti, there has no effect on CO₂ adsorption. Due to the synergistic effect of Bi doping, oxygen vacancies, and Sr active site, the 1.0% Bi-doped Ti site in SrTiO_3-x (1.0% Bi-Ti-STO) had the best photocatalytic performance under visible light (λ ≥ 420 nm). CO and CH₄ yields were 5.58 umol/g/h and 0.36 umol/g/h. Photocatalytic CO₂ reduction path has always been the focus of exploration. The in-situ FTIR spectrum proved the step of photocatalytic CO₂ reduction and COO- and COOH are important intermediates in the photocatalytic CO₂ reaction.

Hollow Polyaniline Microsphere/MnO2/Fe3O4 Nanocomposites in Adsorptive Removal of Toxic Dyes from Contaminated Water

Dyes are considered as recalcitrant compounds and are not easily removed through conventional water treatment processes. The present study demonstrated the fabrication of polyaniline hollow microsphere (PNHM)/MnO₂/Fe₃O₄ composites by in situ deposition of MnO₂ and Fe₃O₄ nanoparticles on the surface of PNHM. The physicochemical characteristics and adsorption behavior of the prepared PNHM/MnO₂/Fe₃O₄ composites towards the removal of toxic methyl green (MG) and Congo red (CR) dyes have been investigated. The characterization study revealed the successful synthesis of the prepared PNHM/MnO₂/Fe₃O₄ adsorbent with a high Brunauer-Emmett-Teller (BET) surface area of 191.79 m²/g. The batch adsorption study showed about 88 and 98% adsorption efficiencies for MG and CR dyes, respectively, at an optimum dose of 1 g/L of PNHM/MnO₂/Fe₃O₄ at pH ∼6.75 at room temperature (303 ± 3 K). The adsorption phenomena of MG and CR dyes were well described by the Elovich and pseudo-second-order kinetics, respectively, and Freundlich isotherm model. The thermodynamics study shows that the adsorption reactions were endothermic and spontaneous in nature. The maximum adsorption capacity (Q_max) for MG and CR dyes was observed as 1142.13 and 599.49 mg/g, respectively. The responsible adsorption mechanisms involved in dye removal were electrostatic interaction, ion exchange, and the formation of the covalent bonds. The coexisting ion study revealed that the presence of phosphate co-ion considerably reduced the CR dye removal efficiency. However, the desorption-regeneration study demonstrated the successful reuse of the spent PNHM/MnO₂/Fe₃O₄ material for the adsorption of MG and CR dyes for several cycles. Given the aforementioned findings, the PNHM/MnO₂/Fe₃O₄ nanocomposites could be considered as a promising adsorbent for the remediation of dye-contaminated water.