Fluorescent Cationic Conjugated Polymer-Based Adaptive Developing Strategy for Both Sebaceous and Blood Fingerprints

A novel 3D-printed portable electroplating device enhances latent fingerprints on metal substrates

This work introduces a 3D-printed portable electroplating device for the visualization of latent fingerprints (LFPs) on metallic substrates. An electroplating solution of Ag+-Cu2+ in a deep eutectic solvent (DES) is used. The electroplating is performed by two electrodes equivalent to an anode (+) and a cathode (-). The cathode is connected to the metal surface with the magnetic or alligator clip for carrying the LFP. The anode is connected to cotton dipped in the electroplating solution. The device was optimized in terms of the electroplating solution composition, and electroplating potential, current, and time. The device produced images with good resolution, revealing LFP ridges in minute detail of more than 12 points. The device also exhibited good repeatability and images were assessed against guidelines from the Centre for Applied Science and Technology (CAST) and the International Fingerprint Research Group (IFRG). The developed device could be applied to visualize LFPs in forensic investigations.

Colloidal Polymer Nanoparticles as Smart Inks for Authentication and Indication of Latent Fingerprints and Scratch

An environmentally friendly smart ink was developed by incorporating fluorescein into functionalized poly(methyl methacrylate) (PMMA) nanoparticles synthesized using an emulsifier-free emulsion copolymerization approach. The functional comonomers of 2-(dimethylamino)ethyl methacrylate (DMAEMA), acrylamide, hydroxyethyl methacrylate, and glycidyl methacrylate in 10 wt % with respect to methyl methacrylate were used to obtain the functionalized colloidal PMMA nanoparticles. Functional groups of the latex nanoparticles were characterized by Fourier-transform infrared spectroscopy. Field emission scanning electron microscopy results showed that all of the latex nanoparticles have nearly spherical morphologies with variations in size and surface smoothness due to the presence of different comonomers. Ultraviolet-visible and fluorescence spectra indicated that the fluorescein-doped latex nanoparticles containing the DMAEMA comonomer had the highest absorbance and fluorescence intensity. In the alkaline media, fluorescein turns to a dianion, showing a red shift and increased absorbance in the UV-vis spectroscopy. In addition, the electron inductive characteristics of the tertiary amine groups result in enhancing the conjugation of fluorescein molecules and increasing the fluorescence intensities. Therefore, the colloidal nanoparticles with amine functional groups were used in the formulation of a smart ink with applications in securing documents and fingerprints, encrypting banknotes and money, detecting latent fingerprints, crafting anticounterfeiting paper, and eventually providing optical detection and indication of surface scratches.

Strongly Fluorescent Conjugated Polymer Nanoparticles in Aqueous Colloidal Solution for Universal, Efficient and Effective Development of Sebaceous and Blood Fingerprints

Taking the same developing strategy for different types of latent fingerprints is helpful in improving the efficiency of criminal investigation. Here we advanced a new strategy based on amino-functionalized poly(p-phenylenevinylene) nanoparticles (PPV-brPEI NPs) in aqueous colloidal solution as the developing reagent. The desirable amino functionality and strong emission of NPs were simultaneously realized by adding branched polyethyleneimine (brPEI) during the process of thermal elimination of the PPV polymer precursor. The NPs were demonstrated to have negligible effects on the extraction of biological information from DNA. Using the PPV-brPEI NPs-soaked cotton pad, both latent sebaceous fingerprints (LSFPs) and latent blood fingerprints (LBFPs) can be effectively developed on different nonporous substrates. This strategy was highly sensitive and effective for aged, contaminated and moldy fingerprints. Additionally, the developed fingerprints could tolerate humidity environment and the alcohol atmosphere. The mechanism investigation suggests that interaction between PPV-brPEI NPs and sebum ingredients contributes to the development of LSFPs and interaction between PPV-brPEI NPs and proteins in blood contributes to the development of LBFPs, but the former is not as stable as the latter. This work provides a simple, environment/operator-friendly strategy for efficient fingerprint development, which is very promising for practical criminal investigations.

Recent Advances in Enhancement Techniques for Blood Fingerprints

The blood fingerprint enhancement is not so eye-catching as latent fingerprint development in forensic community, but it is indeed an important piece of evidence for personal identification, forensic analysis and even reconstruction of crime scenes. In over past ten years, novel reagents, advanced materials and emerging techniques have growingly participated in blood fingerprint enhancement, which not only leads to a higher level of developing sensitivity, selectivity and contrast, but also endows blood impressions with more forensic significance. This review summarizes recent advances in conventional chemical reagents targeting at heme, protein and amino acid as well as emerging enhancement techniques based on advanced materials, new equipment or methods. Some critical issues in forensic science are also discussed, including partial blood fingerprint enhancement, false positive of developing reagents, the compatibility of blood enhancement technique and DNA, fingerprint age determination, and so on. Finally, we have proposed several urgent problems to be solved and the prospects of some promising techniques were proposed in the field of blood fingerprint enhancement in future work.

Instantaneous High-Resolution Visual Imaging of Latent Fingerprints in Water Using Color-Tunable AIE Pincer Complexes

Instant visualization of latent fingerprints is developed by using a series of water-soluble terpyridine zinc complexes as aggregation-induced emission probes in pure water, under UV light or ambient sunlight. By simply soaking, or spraying with an aqueous solution of the probe, bright yellow fluorescence images with high contrast and resolution are readily developed on various surfaces including tinfoil, glass, paper, steel, leather, and ceramic tile. Remarkably, latent fingerprints can be visualized within seconds including details of whorl and sweat pores. The color of emission can be tuned from blue to orange by modifying the pincer ligands, allowing direct imaging under sunlight. These inexpensive, water-resistant, and color-tunable probes provide a practical approach for latent fingerprints recording and analysis, security protection, as well as criminal investigation in different scenarios.

Synthesis of Mesoporous SiO2 coating containing chlorine phenol formaldehyde resin (Cl-PFR) composites for effective fingerprint detection

As a kind of non-metals fluorescent reagent, the containing chlorine phenol-formaldehyde resin (Cl-PFR) nanoparticles (NPs) were synthesized with the facile method. The as-synthesized Cl-PFR nanoparticles can emit strong green fluorescence emission under the irradiation of 365nm UV light. Since mesoporous silica nanoparticles (MSNs) NPs have a large specific area, strong adsorption, and uniform dispersion, the MSN coating Cl-PFR composites were prepared by mixing Cl-PFR and MSN NPs together. Thus, the as-synthesized multifunctional composites combine the advantages of green fluorescence Cl-PFR, and strong adhesion MSN was applied to detect the potential fingerprint. Different bases fingerprints (glass, paper, aluminum sheets, rough stones, tape) can be clearly observed in the presence of the Cl-PFR@MSN-NH₂ composites. Furthermore, the aging three months and washed with water several times fingerprint can also be clearly displayed with the multifunctional composites. This study provided a simple, economical, and non-toxic fluorescent reagent for the application in fingerprint detection.

A fluorescence biosensor based on double-stranded DNA and a cationic conjugated polymer coupled with exonuclease III for acrylamide detection

As a toxic substance on human health produced in food thermal treatment, simple analytical approaches are highly desired for the detection of acrylamide (ACR) in foods. With the aid of exonuclease III (Exo III), a simple fluorescence sensor was proposed based on carboxyfluorescein-labeled double-stranded DNA (FAM-dsDNA) and a cationic conjugated polymer (PFP). Fluorescence resonance energy transfer (FRET) efficiency between FAM and PFP was changed with and without ACR. When ACR was present, ACR and single-stranded DNA (P1, ssDNA) formed an adduct, allowing free FAM-labeled complementarity strand DNA (P2, FAM-csDNA) to appear in the solution and avoiding the digestion of P2 by Exo III. After the addition of PFP, the interaction of PFP and FAM induced strong FRET. Under optimized conditions, ACR was detected with a limit of detection (LOD) of 0.16 μM. According to this biosensor, a LOD of 1.3 μM in water extract samples was observed with a good recovery rate (95-110 %).

Dynamic Fluorescent Anti-Counterfeiting Labels Based on Conjugated Polymers Confined in Submicron Fibrous Membranes

Developing a new anti-counterfeiting strategy is of great significance to combating the global counterfeiting problem. Here we report the construction of a dynamic fluorescence response system for anti-counterfeiting by combining the photochromism induced by the ring-opening of spiropyran (SP) to merocyanine (MC) with the fluorescence resonance energy transfer (FRET) between the conjugated polymer and MC. After elucidating the design principle, a new conjugated polymer, PPETE-SP, consisting of a poly[p-(phenylene ethynylene)-alt-(thienylene-ethynylene)] (PPETE) backbone with pendant SP, was synthesized and characterized. With poly(methyl methacrylate) (PMMA) as the matrix, the PPETE-SP/PMMA fibrous membrane was prepared via electrospinning. Under the irradiation of UV light, the fluorescent color of the membrane dynamically changed from green to light green, then light pink, and finally pink, and this process was reversible under visible light. The fluorescence emission switch was examined for 10 cycles and proved to have good repeatability, indicating that the membrane can be directly used as an anti-counterfeiting label for multiple verifications. The FRET efficiency was found to be about 61% based on the FRET study with confocal laser scanning microscopy. The covalent bonding between PPETE backbone and SP, the confinement of PPETE-SP chains in the fibrous membrane, as well as employing PMMA as the matrix were demonstrated to be crucial in realizing the photochromism and the FRET. Different anti-counterfeiting modes were proposed, providing rich selections for operation of verification. Such facile-to-operate and hard-to-imitate dynamic fluorescent responsive materials are very promising for use in practical anti-counterfeiting applications.

Cross-Linking Induced Emission of Polymer Micelles for High-Contrast Visualization Level 3 Details of Latent Fingerprints

Rationally developing an intelligent tool for high-contrast fluorescence imaging of latent fingerprints (LFPs) is gaining much concern in many applications such as medical diagnostics and forensic investigations. Herein, the off-on fluorescent polymer micelles (PMs) have been rationally designed and synthesized for high-contrast fluorescence imaging of LFPs through the cross-linking reaction of hydrazine (N₂H₄) and aldehyde group of polymer. Excitingly, the cross-linking (N₂H₄) induced emission of PMs has the property of aggregation-induced emission (AIE) and excited state intramolecular proton transfer (ESIPT), which could effectively address the notorious aggregation-caused quenching (ACQ) effects of conventional organic dyes. In addition, the cross-linking strategy can not only improve structural stability of PMs but also enhance its fluorescence brightness. The experiment results demonstrated that PMs showed high water dispersibility (100% aqueous solution), high selectivity, large Stokes shift (∼150 nm), good photostability, and excellent long-term stability. Because of the hydrophobic interaction between the PMs and fingerprint components, the PMs preferentially adhered onto the ridges of fingerprint, and then cross-linking (N₂H₄) induced emission properties endowed the PMs for high-contrast imaging of LFPs in different substrates, especially the levels 1-3 details of LFPs. We expect that this strategy will provide vital support for LFPs technology.