Rock-Salt MnS0.5Se0.5 Nanocubes Assembled on N-Doped Graphene Forming van der Waals Heterostructured Hybrids as High-Performance Anode for Lithium- and Sodium-Ion Batteries

Activating the MnS0.5Se0.5 Microspheres as High-Performance Cathode Materials for Aqueous Zinc-Ion Batteries: Insight into In Situ Electrooxidation Behavior and Energy Storage Mechanisms

Manganese-based materials are regarded as the most prospective cathode materials because of their high natural abundance, low toxicity, and high specific capacity. Nevertheless, the low conductivity, poor cycling performance, and controversial energy storage mechanisms hinder their practical application. Here, the MnS0.5Se0.5 microspheres are synthesized by a two-step hydrothermal approach and employed as cathode materials for aqueous zinc-ion batteries (AZIBs) for the first time. Interestingly, in-depth ex situ tests and electrochemical kinetic analyses reveal that MnS0.5Se0.5 is first irreversibly converted into low-crystallinity ZnMnO3 and MnOx by in situ electrooxidation (MnS0.5Se0.5-EOP) during the first charging process, and then a reversible co-insertion/extraction of H+/Zn2+ occurs in the as-obtained MnS0.5Se0.5-EOP electrode during the subsequent discharging and charging processes. Benefiting from the increased surface area, shortened ion transport path, and stable lamellar microsphere structure, the MnS0.5Se0.5-EOP electrodes deliver high reversible capacity (272.8 mAh g-1 at 0.1 A g-1), excellent rate capability (91.8 mAh g-1 at 2 A g-1), and satisfactory cyclic stability (82.1% capacity retention after 500 cycles at 1 A g-1). This study not only provides a powerful impetus for developing new types of manganese-based chalcogenides, but also puts forward a novel perspective for exploring the intrinsic mechanisms of in situ electrooxidation behavior.

Boosting Manganese Selenide Anode for Superior Sodium-Ion Storage via Triggering α → β Phase Transition

Sodium-ion batteries (SIBs) have been extensively studied owing to the abundance and low-price of Na resources. However, the infeasibility of graphite and silicon electrodes in sodium-ion storage makes it urgent to develop high-performance anode materials. Herein, α-MnSe nanorods derived from δ-MnO2 (δ-α-MnSe) are constructed as anodes for SIBs. It is verified that α-MnSe will be transferred into β-MnSe after the initial Na-ion insertion/extraction, and δ-α-MnSe undergoes typical conversion mechanism using a Mn-ion for charge compensation in the subsequent charge-discharge process. First-principles calculations support that Na-ion migration in defect-free α-MnSe can drive the lattice distortion to phase transition (alpha → beta) in thermodynamics and dynamics. The formed β-MnSe with robust lattice structure and small Na-ion diffusion barrier boosts great structure stability and electrochemical kinetics. Hence, the δ-α-MnSe electrode contributes excellent rate capability and superior cyclic stability with long lifespan over 1000 cycles and low decay rate of 0.0267% per cycle. Na-ion full batteries with a high energy density of 281.2 Wh·kg-1 and outstanding cyclability demonstrate the applicability of δ-α-MnSe anode.

Rational design of N-doped C-encapsulated flower-like nickel-based heterostructured microsphere anodes for high-capacity and stable lithium storage

Designing a unique morphology and nanoarchitecture with a heterostructure is regarded as an efficient strategy to achieve lithium-ion batteries (LIBs) with high capacity and cycle life. Herein, N-doped C-encapsulated flower-like NiS/Ni3(BO3)2 heterostructures (NiS/Ni3(BO3)2/NC) with a core-shell morphology are successfully synthesized by a facile general method to improve the rate performance and prolong the cycle life of LIBs. The coated NC layer and core-shell structure with elasticity can relieve the volume expansion during the lithiation/delithiation process to strengthen the stability of the structure. Moreover, the NC layer and NiS/Ni3(BO3)2/NC heterostructure can enhance the electronic conductivity of the electrode and guarantee fast and unimpeded electron transfer channels, thereby improving the electrochemical reaction kinetics. Owing to the synergy of heterostructures and core-shell layer, the as-synthesized NiS/Ni3(BO3)2/NC anode acquires a specific charge capacity of 549 mA h g-1 at 0.2 A g-1 after 100 cycles; meanwhile, a reversible capacity of 322 mA h g-1 can be maintained even at 1 A g-1 after 500 cycles. This study develops a universal interface manipulation strategy for the synthesis of M3B2O6-based or/and other advanced transition metal compound anode materials for the practical applications of LIBs.

Metal Selenides Find Plenty of Space in Architecting Advanced Sodium/Potassium Ion Batteries

The rapid evolution of smart grid system urges researchers on exploiting systems with properties of high-energy, low-cost, and eco-friendly beyond lithium-ion batteries. Under the circumstances, sodium- and potassium-ion batteries with the semblable work mechanism to commercial lithium-ion batteries, hold the merits of cost-effective and earth-abundant. As a result, it is deemed a promising candidate for large-scale energy storage devices. Exploiting appropriate active electrode materials is in the center of the spotlight for the development of batteries. Metal selenides with special structures and relatively high theoretical capacity have aroused broad interest and achieved great achievements. To push the smooth development of metal selenides and enhancement of the electrochemical performance of sodium- and potassium-ion batteries, it is vital to grasp the inherent properties and electrochemical mechanisms of these materials. Herein, the state-of-the-art development and challenges of metal selenides are summarized and discussed. Meanwhile, the corresponding electrochemical mechanism and future development directions are also highlighted.

In-situ construction of binder-free MnO2/MnSe heterostructure membrane for high-performance energy storage in pseudocapacitors

Manganese (Mn)-based oxides are considered suitable positive electrode materials for supercapacitors (SCs). However, their cycle stability and specific capacitance are significantly hindered by key restrictions such as structural instability and low conductivity. Herein, we demonstrated a novel nanorod (NR)-shaped heterostructured manganese dioxide/manganese selenide membrane (MnO2/MnSe) on carbon cloth (CC) (denoted as MnO2/MnSe-NR@CC) with a high aspect ratio by a straightforward and facile hydrothermal process. Experiments have demonstrated that doping selenium atoms to oxygen sites reduce electronegativity, increasing the intrinsic electronic conductivity of MnO2, decreasing electrostatic interactions with electrolyte ions, and thus boosting the reaction kinetics. Further, the selenium doping results in an amorphous surface with extensive oxygen defects, which contributed to the emergence of additional charge storage sites with pseudocapacitive characteristics. As expected, novel heterostructured MnO2/MnSe-NR@CC as an electrode for SC exhibits a high capacitance of 740.63 F/g at a current density of 1.5 A/g, with excellent cycling performance (93% capacitance retention after 5000 cycles). The MnO2/MnSe-NR@CC exhibited outstanding charge storage capability, dominating capacitive charge storage (84.6% capacitive at 6 mV/s). To examine the practical applications of MnO2/MnSe-NR@CC-ASC as a positive electrode, MnO2/MnSe-NR@CC//AC device was fabricated. The MnO2/MnSe-NR@CC//AC-ASC device performed exceptionally well, with a maximum capacitance of 166.66 F/g at 2 A/g, with a capacitance retention of 94%, after 500 GCD cycles. Additionally, it delivers an energy density of 75.06 Wh/kg at a power density of 1805.1 W/kg and maintains 55.044 Wh/kg at a maximum power density of 18,159 W/kg. This research sheds fresh information on the anionic doping method and has the potential to be applied to the synthesis of positive electrode materials for energy storage applications.

Heterogeneous Atoms Substituted Rock Salt Phase Mn1 -x Fex O Solid Solution with Rich Defects for Advanced Lithium-Ion Batteries

Heterogeneous atoms substitution is an efficient method for promoting Li⁺ storage of transition metal oxides. Herein, a series of Fe-substituted MnO solid solutions with different Fe contents are synthesized by a feasible solid-phase method. The synergistic effects between heterogeneous atoms and rich vacancies are synchronously obtained, which hold distinctive electronic structures and substantial active sites. When optimized Mn_0.55 Fe_0.45 O solid solution as anodes for lithium-ion batteries, pre-prepared electrodes exhibit reversible lithium storage of 1286.9 mAh g^-1 at 1 A g ^-1 after 400 cycles and even 628.1 mAh g^-1 at 2 A g^-1 after 1000 cycles. The LiCoO₂ //Mn_0.55 Fe_0.45 O full cells are assembled, achieving the reversible capacity of 130.2 and 111.3 mAh g^-1 after 150 cycles at 0.1 and 0.2 A g^-1 , respectively. Density functional theory calculations also authenticate that the electrochemical activity can be markedly boosted by the heterogeneous atoms substituted Mn_{1 -x} Fe_x O solid solution.

Synthesis, structure, and magnetic properties of the quaternary oxysulfides Ln 5V3O7S6 (Ln = La, Ce)

Two rare earth oxysulfides Ln 5V3O7S6 (Ln = La, Ce) have been synthesized and their structures determined. The two isostructural compounds crystallize in the orthorhombic space group Pmmn (no. 59). The structure features one-dimensional edge-sharing VS4O2 octahedron chains parallel to the b axis. The bonding between V and S/O is covalent, and between Ln 3+ and the rest of the matrix ionic. Magnetic susceptibility measurement revealed that V is in a mixed valence state of V3+ and V4+. Its magnetic behavior follows the Curie-Weiss law.