High-Performance Room-Temperature UV-IR Photodetector Based on the InAs Nanosheet and Its Wavelength- and Intensity-Dependent Negative Photoconductivity

Negative Photoconductivity of Fe3GeTe2 Crystal with Native Heterostructure for Ultraviolet to Terahertz Ultra-Broadband Photodetection

Gaining insight into the photoelectric behavior of ferromagnetic materials is significant for comprehensively grasping their intrinsic properties and broadening future application fields. Here, through a specially designed Fe3GeTe2/O-Fe3GeTe2 heterostructure, first, the broad-spectrum negative photoconductivity phenomenon of ferromagnetic nodal line semimetal Fe3GeTe2 is reported that covers UV-vis-infrared-terahertz bands (355 nm to 3000 µm), promising to compensate for the inadequacies of traditional optoelectronic devices. The significant suppression of photoexcitation conductivity is revealed to arise from the semimetal/oxidation (sMO) interface-assisted dual-response mechanism, in which the electron excitation origins from the semiconductor photoconductivity effect in high-energy photon region, and semimetal topological band-transition in low-energy photon region. High responsivities ranging from 103 to 100 mA W-1 are acquired within ultraviolet-terahertz bands under ±0.1 V bias voltage at room temperature. Notably, the responsivity of 2.572 A W-1 at 3000 µm (0.1 THz) and the low noise equivalent power of 26 pW Hz-1/2 surpass most state-of-the-art mainstream terahertz detectors. This research provides a new perspective for revealing the photoelectric conversion properties of Fe3GeTe2 crystal and paves the way for the development of spin-optoelectronic devices.

Giant Negative Photoresponse in van der Waals Graphene/AgBiP2Se6/Graphene Trilayer Heterostructures

The positive photoconductive (PPC) effect is a well-established primary detection mechanism employed by photodetectors. In contrast, the negative photoconductive (NPC) effect is not extensively investigated thus far, and research on the NPC effect is still in its early stage. Herein, a quaternary van der Waals material, AgBiP2Se6 atomic layers, is discovered to achieve a giant NPC effect. Through experimental observations in a Graphene/AgBiP2Se6/ Graphene-based vertical photodetector, an irreversible conversion is identified from common PPC photoresponse to atypical NPC photoresponse. Notably, this device demonstrates an exceptionally high negative responsivity (R) of 4.9 × 105 A W-1, surpassing the previous records for NPC photodetectors. Additionally, it exhibits remarkable optoelectronic performances, including an external quantum efficiency of 1.3 × 108% and a detectivity (D) of 3.60 × 1012 Jones. The exceptionally high NPC photoresponse observed in this device can be attributed to the swift suppression of photogenerated free carriers at robust recombination centers situated at significant depths, induced by the elevated drain-source voltage bias. The remarkably high NPC photoresponse also positions AgBiP2Se6 as a promising 2D material for multifunctional optoelectronic devices and an excellent platform for systematic exploration of the NPC effect.

Broadening spectral responses and achieving environmental stability in SnS2/Ag-NPs/HfO2 flexible phototransistors

Layered two-dimensional (2D) materials have gained popularity thanks to their atomically thin physique and strong coupling with light. Here, we investigated a wide band gap (≥ 2 eV) 2D material, i.e., tin disulfide (SnS2), and decorated it with silver nanoparticles, Ag-NPs, for broadband photodetection. Our results show that the SnS2/Ag-NPs devices exhibit broadband photodetection ranging from the ultraviolet to near-infrared (250-1050 nm) spectrum with decreased rise/decay times from 8/20 s to 7/16 s under 250 nm wavelength light compared to the bare SnS2 device. This is attributed to the localized surface plasmon resonance effect and the wide band gap of SnS2 crystal. Furthermore, the HfO2-passivated SnS2/Ag-NPs devices exhibited high photodetection performance in terms of photoresponsivity (∼12 500 A W-1), and external quantum efficiency (∼6 × 106%), which are significantly higher compared to those of bare SnS2. Importantly, after HfO2 passivation, the SnS2/Ag-NPs photodetector maintained the stable performance for several weeks with merely ∼5.7% reduction in photoresponsivity. Lastly, we fabricated a flexible SnS2/Ag-NPs photodetector, which shows excellent and stable performance under various bending curvatures (0, 20, and 10 mm), as it retains ∼80% of its photoresponsivity up to 500 bending cycles. Thus, our study provides a simple route to realize broadband and stable photoactivity in flexible 2D material-based devices.

Controllable Synthesis of 2H-1T' Mox Re(1- x ) S2 Lateral Heterostructures and Their Tunable Optoelectronic Properties

Constructing heterostructures and doping are valid ways to improve the optoelectronic properties of transition metal dichalcogenides (TMDs) and optimize the performance of TMDs-based photodetectors. Compared with transfer techniques, chemical vapor deposition (CVD) has higher efficiency in preparing heterostructures. As for the one-step CVD growth of heterostructures, cross-contamination between the two materials may occur during the growth process, which may provide the possibility of one-step simultaneous realization of controllable doping and formation of alloy-based heterostructures by finely tuning the growth dynamics. Here, 2H-1T' Mox Re(1- x ) S2 alloy-to-alloy lateral heterostructures are synthesized through this one-step CVD growth method, utilizing the cross-contamination and different growth temperatures of the two alloys. Due to the doping of a small amount of Re atoms in 2H MoS2 , 2H Mox Re(1- x ) S2 has a high response rejection ratio in the solar-blind ultraviolet (SBUV) region and exhibits a positive photoconductive (PPC) effect. While the 1T' Mox Re(1- x ) S2 formed by heavily doping Mo atoms into 1T' ReS2 will produce a negative photoconductivity (NPC) effect under UV laser irradiation. The optoelectronic property of 2H-1T' Mox Re(1- x ) S2 -based heterostructures can be modulated by gate voltage. These findings are expected to expand the functionality of traditional optoelectronic devices and have potential applications in optoelectronic logic devices.

Monolithic InSb nanostructure photodetectors on Si using rapid melt growth

Monolithic integration of InSb on Si could be a key enabler for future electronic and optoelectronic applications. In this work, we report the fabrication of InSb metal-semiconductor-metal photodetectors directly on Si using a CMOS-compatible process known as rapid melt growth. Fourier transform spectroscopy demonstrates a spectrally resolved photocurrent peak from a single crystalline InSb nanostructure with dimensions of 500 nm × 1.1 μm × 120 nm. Time-dependent optical characterization of a device under 1550 nm illumination indicated a stable photoresponse with responsivity of 0.50 A W^-1 at 16 nW illumination, with a time constant in the range of milliseconds. Electron backscatter diffraction spectroscopy revealed that the single crystalline InSb nanostructures contain occasional twin defects and crystal lattice twist around the growth axis, in addition to residual strain, possibly causing the observation of a low-energy tail in the detector response extending the photosensitivity out to 10 μm wavelengths (0.12 eV) at 77 K.

Near-Infrared Artificial Optical Synapse Based on the P(VDF-TrFE)-Coated InAs Nanowire Field-Effect Transistor

Optical synapse is the basic component for optical neuromorphic computing and is attracting great attention, mainly due to its great potential in many fields, such as image recognition, artificial intelligence and artificial visual perception systems. However, optical synapse with infrared (IR) response has rarely been reported. InAs nanowires (NWs) have a direct narrow bandgap and a large surface to volume ratio, making them a promising material for IR detection. Here, we demonstrate a near-infrared (NIR) (750 to 1550 nm) optical synapse for the first time based on a poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE))-coated InAs NW field-effect transistor (FET). The responsivity of the P(VDF-TrFE)-coated InAs NW FET reaches 839.3 A/W under 750 nm laser illumination, demonstrating the advantage of P(VDF-TrFE) coverage. The P(VDF-TrFE)-coated InAs NW device exhibits optical synaptic behaviors in response to NIR light pulses, including excitatory postsynaptic current (EPSC), paired-pulse facilitation (PPF) and a transformation from short-term plasticity (STP) to long-term plasticity (LTP). The working mechanism is attributed to the polarization effect in the ferroelectric P(VDF-TrFE) layer, which dominates the trapping and de-trapping characteristics of photogenerated holes. These findings have significant implications for the development of artificial neural networks.

Earth-abundant and environmentally benign Ni-Zn iron oxide intercalated in a polyaniline based nanohybrid as an ultrafast photodetector

Nickel-zinc iron oxide (NZF) was introduced into a polyaniline (PANI) matrix by an in situ chemical oxidation polymerization approach. The surface composition and chemical states were investigated by X-ray photoelectron spectroscopy (XPS), which revealed an Fe 2p spectrum with the two peak positions of Fe 2p_3/2 and Fe 2p_1/2 at 711.00 and 724.48 eV, respectively. Deconvolution of the Fe 2p_3/2 peak revealed two components with binding energies of 713.98 and 718.16 eV, corresponding to the presence of Fe cations in the octahedral and tetrahedral sites. Additionally, the Rietveld refinement of NZF showed a cubic system with the Fd₃m space group. High-resolution transmission electron microscopy (HRTEM) analysis showed that the NZF material strongly interacts with polyaniline, while the selected area electron diffraction (SAED) pattern perfectly matched with the XRD data. Lognormal distribution was used to determine the particle size, which was found to be in the range of 1-100 nm. A flexible photodetector device utilizing the NZF-PANI nanohybrid was fabricated on an environmentally friendly, biodegradable cellulose paper substrate and the device exhibited excellent performance, i.e., a responsivity of 0.069 A W^-1 and detectivity of 7.258 × 10¹⁰ Jones at a very low voltage of 0.1 V. The non-stretched device showed a responsivity of 24.980 A W^-1 at 5 V, whereas at 2 cm^-1 bending curvature, the device showed a responsivity of 20.175 A W^-1, which was much higher than the responsivity of a commercial photodetector (<0.5 A W^-1).

Artificial Vision Adaption Mimicked by an Optoelectrical In2O3 Transistor Array

Simulation of biological visual perception has gained considerable attention. In this paper, an optoelectrical In₂O₃ transistor array with a negative photoconductivity behavior is designed using a side-gate structure and a screen-printed ion-gel as the gate insulator. This paper is the first to observe a negative photoconductivity in electrolyte-gated oxide devices. Furthermore, an artificial visual perception system capable of self-adapting to environmental lightness is mimicked using the proposed device array. The transistor device array shows a self-adaptive behavior of light under different levels of light intensity, successfully demonstrating the visual adaption with an adjustable threshold range to the external environment. This study provides a new way to create an environmentally adaptive artificial visual perception system and has far-reaching significance for the future of neuromorphic electronics.