Nanovoid-Enhanced Thin-Film Composite Reverse Osmosis Membranes Using ZIF-67 Nanoparticles as a Sacrificial Template

Recent Advances in Metal-Organic Framework (MOF)-Based Composites for Organic Effluent Remediation

Environmental pollution caused by organic effluents emitted by industry has become a worldwide issue and poses a serious threat to the public and the ecosystem. Metal-organic frameworks (MOFs), comprising metal-containing clusters and organic bridging ligands, are porous and crystalline materials, possessing fascinating shape and size-dependent properties such as high surface area, abundant active sites, well-defined crystal morphologies, and huge potential for surface functionalization. To date, numerous well designated MOFs have emerged as critical functional materials to solve the growing challenges associated with water environmental issues. Here we present the recent progress of MOF-based materials and their applications in the treatment of organic effluents. Firstly, several traditional and emerging synthesis strategies for MOF composites are introduced. Then, the structural and functional regulations of MOF composites are presented and analyzed. Finally, typical applications of MOF-based materials in treating organic effluents, including chemical, pharmaceutical, textile, and agricultural wastewaters are summarized. Overall, this review is anticipated to tailor design and regulation of MOF-based functional materials for boosting the performance of organic effluent remediation.

Beyond nothingness in the formation and functional relevance of voids in polymer films

Voids-the nothingness-broadly exist within nanomaterials and impact properties ranging from catalysis to mechanical response. However, understanding nanovoids is challenging due to lack of imaging methods with the needed penetration depth and spatial resolution. Here, we integrate electron tomography, morphometry, graph theory and coarse-grained molecular dynamics simulation to study the formation of interconnected nanovoids in polymer films and their impacts on permeance and nanomechanical behaviour. Using polyamide membranes for molecular separation as a representative system, three-dimensional electron tomography at nanometre resolution reveals nanovoid formation from coalescence of oligomers, supported by coarse-grained molecular dynamics simulations. Void analysis provides otherwise inaccessible inputs for accurate fittings of methanol permeance for polyamide membranes. Three-dimensional structural graphs accounting for the tortuous nanovoids within, measure higher apparent moduli with polyamide membranes of higher graph rigidity. Our study elucidates the significance of nanovoids beyond the nothingness, impacting the synthesis‒morphology‒function relationships of complex nanomaterials.

Engraving Polyamide Layers by In Situ Self-Etchable CaCO3 Nanoparticles Enhances Separation Properties and Antifouling Performance of Reverse Osmosis Membranes

Nanovoids within a polyamide layer play an important role in the separation performance of thin-film composite (TFC) reverse osmosis (RO) membranes. To form more extensive nanovoids for enhanced performance, one commonly used method is to incorporate sacrificial nanofillers in the polyamide layer during the exothermic interfacial polymerization (IP) reaction, followed by some post-etching processes. However, these post-treatments could harm the membrane integrity, thereby leading to reduced selectivity. In this study, we applied in situ self-etchable sacrificial nanofillers by taking advantage of the strong acid and heat generated in IP. CaCO3 nanoparticles (nCaCO3) were used as the model nanofillers, which can be in situ etched by reacting with H+ to leave void nanostructures behind. This reaction can further degas CO2 nanobubbles assisted by heat in IP to form more nanovoids in the polyamide layer. These nanovoids can facilitate water transport by enlarging the effective surface filtration area of the polyamide and reducing hydraulic resistance to significantly enhance water permeance. The correlations between the nanovoid properties and membrane performance were systematically analyzed. We further demonstrate that the nCaCO3-tailored membrane can improve membrane antifouling propensity and rejections to boron and As(III) compared with the control. This study investigated a novel strategy of applying self-etchable gas precursors to engrave the polyamide layer for enhanced membrane performance, which provides new insights into the design and synthesis of TFC membranes.

New directions on membranes for removal and degradation of emerging pollutants in aqueous systems

Emerging pollutants (EPs) refer to a group of non-regulated chemical or biological substances that have been recently introduced or detected in the environment. These pollutants tend to exhibit resistance to conventional treatment methods and can persist in the environment for prolonged periods, posing potential adverse effects on ecosystems and human health. As we enter a new era of managing these pollutants, membrane-based technologies hold significant promise in mitigating impact of EPs on the environment and safeguarding human health due to their high selectivity, efficiency, cost-effectiveness and capability for simultaneous separation and degradation. Moreover, these technologies continue to evolve rapidly with the development of new membrane materials and functionalities, advanced treatment strategies, and analyses for effectively treating EPs of more recent concerns. The objective of this review is to present the latest directions and advancements in membrane-based technologies for addressing EPs. By highlighting the progress in this field, we aim to share valuable perspectives with researchers and contribute to the development of future directions in sustainable treatments for EPs.

When self-assembly meets interfacial polymerization

Interfacial polymerization (IP) and self-assembly are two thermodynamically different processes involving an interface in their systems. When the two systems are incorporated, the interface will exhibit extraordinary characteristics and generate structural and morphological transformation. In this work, an ultrapermeable polyamide (PA) reverse osmosis (RO) membrane with crumpled surface morphology and enlarged free volume was fabricated via IP reaction with the introduction of self-assembled surfactant micellar system. The mechanisms of the formation of crumpled nanostructures were elucidated via multiscale simulations. The electrostatic interactions among m-phenylenediamine (MPD) molecules, surfactant monolayer and micelles, lead to disruption of the monolayer at the interface, which in turn shapes the initial pattern formation of the PA layer. The interfacial instability brought about by these molecular interactions promotes the formation of crumpled PA layer with larger effective surface area, facilitating the enhanced water transport. This work provides valuable insights into the mechanisms of the IP process and is fundamental for exploring high-performance desalination membranes.

Coupling solar-driven interfacial evaporation with forward osmosis for continuous water treatment

Forward osmosis (FO) driven by osmotic pressure difference has great potential in water treatment. However, it remains a challenge to maintain a steady water flux at continuous operation. Herein, a FO and photothermal evaporation (PE) coupling system (FO-PE) based on high-performance polyamide FO membrane and photothermal polypyrrole nano-sponge (PPy/sponge) is developed for continuous FO separation with a steady water flux. The PE unit with a photothermal PPy/sponge floating on the surface of draw solution (DS) can continuously in situ concentrate DS by solar-driven interfacial water evaporation, which effectively offsets the dilution effect due to the injected water from FO unit. A good balance between the permeated water in FO and the evaporated water in PE can be established by coordinately regulating the initial concentration of DS and light intensity. As a consequence, the polyamide FO membrane exhibits a steady water flux of 11.7 L m-2 h-1 over time under FO coupling PE condition, effectively alleviating the decline in water flux under FO alone. Additionally, it shows a low reverse salt flux of 3 g m-2 h-1. The FO-PE coupling system utilizing clean and renewable solar energy to achieve a continuous FO separation is significantly meaningful for practical applications.

Light-Activated Fuel-Free Janus Metal Organic Framework Colloidal Motors for the Removal of Heavy Metal Ions

Light-powered fuel-free colloidal motors possess significant potential for practical applications ranging from nanomedicine to environmental remediation. However, current light-powered colloidal motors often require the incorporation of expensive metals or high concentrations of toxic chemical fuels, which is a severe limitation for their practical applications. Integrating highly ordered and porous materials with a large surface area into colloidal motors is a promising strategy for upsurging their self-propelled speed and adsorption, which will benefit many applications. Here, highly efficient, fuel-free, and light-activated metal organic framework (MOF)-3-trimethoxysilyl propyl methacrylate Janus colloidal motors with a hierarchical morphology are reported. These colloidal motors can be driven by UV or visible light, with a self-propelled speed tuned by the light intensity. The speed can be further enhanced by morphology optimization or by the addition of H₂O₂ as a fuel. The colloidal motors display a superior efficiency in removing heavy metal ions of Hg, which is up to ∼90% within 40 min from the contaminated water, attributed to their high surface area, hierarchical morphology, large number of active sites, and high mobility. This work not only offers a facile approach to incorporate a versatile MOF family into the design of fuel-free and light-powered Janus colloidal motors, but also demonstrates their potential for real-life applications such as environmental remediation.