Dynamic Modification of Palladium Catalysts with Chain Alkylamines for the Selective Hydrogenation of Alkynes

Efficient Alkyne Semihydrogenation Catalysis Enabled by Synergistic Chemical and Thermal Modifications of a PdIn MOF

Recently, there has been a growing interest in using MOF templating to synthesize heterogeneous catalysts based on metal nanoparticles on carbonaceous supports. Unlike the common approach of direct pyrolysis of PdIn-MOFs at high temperatures, this work proposes a reductive chemical treatment under mild conditions before pyrolysis (resulting in PdIn-QT). The resulting material (PdIn-QT) underwent comprehensive characterization via state-of-the-art aberration-corrected electron microscopy, N2 physisorption, X-ray absorption spectroscopy, Raman, X-ray photoelectron spectroscopy, and X-ray diffraction. These analyses have proven the existence of PdIn bimetallic nanoparticles supported on N-doped carbon. In situ DRIFT spectroscopy reveals the advantageous role of indium (In) in regulating Pd activity in alkyne semihydrogenation. Notably, incorporating a soft nucleation step before pyrolysis enhances surface area, porosity, and nitrogen content compared to direct MOF pyrolysis. The optimized material exhibits outstanding catalytic performance with 96% phenylacetylene conversion and 96% selectivity to phenylethylene in the fifth cycle under mild conditions (5 mmol phenylacetylene, 7 mg cat, 5 mL EtOH, R.T., 1 H2 bar).

Mediating trade-off between activity and selectivity in alkynes semi-hydrogenation via a hydrophilic polar layer

As a crucial industrial process for the production of bulk and fine chemicals, semi-hydrogenation of alkynes faces the trade-off between activity and selectivity due to undesirable over-hydrogenation. By breaking the energy linear scaling relationships, we report an efficient additive-free WO3-based single-atom Pd catalytic system with a vertical size effect of hydrogen spillover. Hydrogen spillover induced hydrophilic polar layer (HPL) with limited thickness on WO3-based support exhibits unconventional size effect to Pd site, in which over-hydrogenation is greatly suppressed on Pd1 site due to the polar repulsive interaction between HPL and nonpolar C=C bonds, whereas this is invalid for Pd nanoparticles with higher altitudes. By further enhancing the HPL through Mo doping, activated Pd1/MoWO3 achieves recorded performance of 98.4% selectivity and 10200 h-1 activity for semi-hydrogenation of 2-methyl-3-butyn-2-ol, 26-fold increase in activity of Lindlar catalyst. This observed vertical size effect of hydrogen spillover offers broad potential in catalytic performance regulation.

Phosphine-Enhanced Semi-Hydrogenation of Phenylacetylene by Cobalt Phosphide Nano-Urchins

Transition metal phosphides are promising, selective, and air-stable nanocatalysts for hydrogenation reactions. However, they often require fairly high temperatures and H2 pressures to provide quantitative conversions. This work reports the positive effect of phosphine additives on the activity of cobalt phosphide nano-urchins for the semi-hydrogenation of phenylacetylene. While the nanocatalyst's activity was low under mild conditions (7 bar of H2 , 100 °C), the addition of a catalytic amount of phosphine remarkably increased the conversion, e. g., from 13 % to 98 % in the case of Pn Bu3 . The heterogeneous nature of the catalyst was confirmed by negative supernatant activity tests. The catalyst integrity was carefully verified by post-mortem analyses (TEM, XPS, and liquid 31 P NMR). A stereo-electronic map was proposed to rationalize the activity enhancement provided over a selection of nine phosphines: the strongest effect was observed for low to moderately hindered phosphines, associated with strong electron donor abilities. A threshold in phosphine stoichiometry was revealed for the enhancement of activity to occur, which was related to the ratio of phosphine to surface cobalt atoms.

Highly selective electrocatalytic alkynol semi-hydrogenation for continuous production of alkenols

Alkynols semi-hydrogenation is a critical industrial process as the product, alkenols, have extensive applications in chemistry and life sciences. However, this class of reactions is plagued by the use of high-pressure hydrogen, Pd-based catalysts, and low efficiency of the contemporary thermocatalytic process. Here, we report an electrocatalytic approach for selectively hydrogenating alkynols to alkenols under ambient conditions. For representative 2-methyl-3-butene-2-ol, Cu nanoarrays derived electrochemically from CuO, achieve a high partial current density of 750 mA cm^-2 and specific selectivity of 97% at -0.88 V vs. reversible hydrogen electrode in alkaline solution. Even in a large two-electrode flow electrolyser, the Cu nanoarrays deliver a single-pass alkynol conversion of 93% with continuous production of 2-methyl-3-butene-2-ol at a rate of ~169 g g_Cu^-1 h^-1. Theoretical and in situ electrochemical infrared investigations reveal that the semi-hydrogenation performance is enhanced by exothermic alkynol adsorption and alkenol desorption on the Cu surfaces. Furthermore, this electrocatalytic semi-hydrogenation strategy is shown to be applicable to a variety of alkynol substrates.

Pyridinic Nitrogen Sites Dominated Coordinative Engineering of Subnanometric Pd Clusters for Efficient Alkynes' Semihydrogenation

Supported metal catalysts have played an important role in optimizing selective semihydrogenation of alkynes for fine chemicals. There into, nitrogen-doped carbons, as a type of promising support materials, have attracted extensive attentions. However, due to the general phenomenon of random doping for nitrogen species in the support, it is still atremendous challenge to finely identify which nitrogen configuration dominates the catalytic property of alkynes' semihydrogenation. Herein, it is reported that uniform mesoporous N-doped carbon spheres derived from mesoporous polypyrrole spheres are used as supports to immobilized subnanometric Pd clusters, which provide a particular platform to research the influence of nitrogen configurations on the alkynes' semihydrogenation. Comprehensive experimental results and density functional theory calculation indicate that pyridinic nitrogen configuration dominates the catalytic behavior of Pd clusters. The high contents of pyridinic nitrogen sites offer abundant coordination sites, which greatly reduces the energy barrier of the rate-determining reaction step and makes Pd clusters own high catalytic activity. The electron effect between pyridinic nitrogen sites and Pd clusters makes the reaction highly selective. Additionally, the good mesostructures also promote the fast transport of substrate. Based on the above, catalyst Pd@PPy-600 exhibits high catalytic activity (99%) and selectivity (96%) for phenylacetylene (C₈ H₆ ) semihydrogenation.

Enhanced Alkene Selectivity for Transfer Semihydrogenation of Alkynes over Electron-Deficient Pt Nanoparticles Encapsulated in Hollow Silica Nanospheres

In this work, we report that Pt nanoparticles confined in hollow porous silica nanospheres (Pt@HPSNs) function as highly selective catalysts for the transfer hydrogenation of phenylacetylene to styrene with ammonia borane. Relative to the deep hydrogenation of phenylacetylene to ethylbenzene over the supported Pt/SiO2, Pt@HPSNs exhibit above 88% of styrene selectivity at nearly 100% of phenylacetylene conversions, and the high selectivity of Pt@HPSNs can be maintained even at high ammonia borane/phenylacetylene ratios and longer reaction time. The Pt 4f X-ray photoelectron spectrum of Pt@HPSNs shows a remarkable ∼1.5 eV shift to high binding energy, proving the nature of electron deficiency of such encapsulated Pt nanoparticles. Combined with extremely minor transfer hydrogenation of styrene to ethylbenzene when styrene as substrates, the enhanced styrene selectivity of Pt@HPSNs is ascribed to the electron deficiency of encapsulated Pt nanoparticles, which leads to the fast desorption of styrene and thus avoids deep hydrogenation.

Tripodal Pd metallenes mediated by Nb2C MXenes for boosting alkynes semihydrogenation

2D metallene nanomaterials have spurred considerable attention in heterogeneous catalysis by virtue of sufficient unsaturated metal atoms, high specific surface area and surface strain. Nevertheless, the strong metallic bonding in nanoparticles aggravates the difficulty in the controllable regulation of the geometry of metallenes. Here we propose an efficient galvanic replacement strategy to construct Pd metallenes loaded on Nb₂C MXenes at room temperature, which is triggered by strong metal-support interaction based on MD simulations. The Pd metallenes feature a chair structure of six-membered ring with the coordination number of Pd as low as 3. Coverage-dependent kinetic analysis based on first-principles calculations reveals that the tripodal Pd metallenes promote the diffusion of alkene and inhibit its overhydrogenation. As a consequence, Pd/Nb₂C delivers an outstanding turnover frequency of 10372 h^-1 and a high selectivity of 96% at 25 ^oC in the semihydrogenation of alkynes without compromising the stability. This strategy is general and scalable considering the plentiful members of the MXene family, which can set a foundation for the design of novel supported-metallene catalysts for demanding transformations.

Electron-Poor Phosphines Enable the Selective Semihydrogenation Reaction of Alkynes with Pd on Carbon Catalysts

An alternative to the Lindlar catalyst for the semihydrogenation reaction of alkynes to alkenes is of high interest. Here we show that palladium on carbon (Pd/C), i.e., a widely available supported Pd catalyst, is converted from an unselective to a chemoselective catalyst during the semihydrogenation reaction of alkynes, after the addition of catalytic amounts of commercially available electron-poor phosphines. The catalytic activity is ≤7 times greater, and the selectivity is comparable to that of the industrial benchmark Lindlar catalyst.

Palladium supported magnetic Fucus Vesiculosus extract as a natural and novel catalyst for the synthesis of N-alkyl-2-(4-methyl-1-oxoisoquinolin-2(1H)-yl)-2-phenylacetamide derivatives

In this paper, a novel catalyst is introduced based on the immobilization of palladium onto magnetic Fucus Vesiculosus extract (Pd@mFuVe catalyst). For the synthesis of Pd@mFuVe catalyst, Fucus Vesiculosus extract is obtained from the plant source, followed by the synthesis of superparamagnetic iron oxide nanoparticles (SPION) onto the extract. The catalyst is characterized by several methods, including scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), FT-IR spectroscopy, vibrating sample magnetometer (VSM), powder X-ray diffraction analysis (XRD), and inductively coupled plasma (ICP). The activity of Pd@mFuVe catalyst is studied in the synthesis of N-alkyl-2-(4-methyl-1-oxoisoquinolin-2(1H)-yl)-2-phenylacetamides. The products were synthesized in three steps, the synthesis of 2-iodobenzoic acid from 2-aminobenzoic acid, which participated in a multicomponent reaction with allylamine, aldehydes, and isocyanides, followed by a cyclization reaction, catalyzed by Pd@mFuVe catalyst. The product yields are high and the catalyst showed good reusability after 5 sequential runs. The most significant, Pd@mFuVe catalyst is fabricated from a plant extract source as a green support for the catalyst.

Pd-In intermetallic nanoparticles with high catalytic selectivity for liquid-phase semi-hydrogenation of diphenylacetylene

Intermetallic nanoparticles (NPs) are highly interesting materials in catalysis due to their geometrically ordered structures and altered electronic properties, but the synthesis of defined intermetallic NPs remains a challenge. Here, we report a novel and facile approach for the synthesis of intermetallic Pd-In NPs in ionic liquids (ILs) at moderate temperatures. Depending on the molar ratio of the metal precursors and the reaction temperature, single-phase Pd₃In, PdIn and Pd₃In₇ NPs were obtained, which was confirmed, e.g. by powder X-ray diffraction, electron microscopy, and optical emission spectroscopy with inductively coupled plasma. The Pd-In NPs stabilized in ILs were used as catalysts in the liquid-phase semi-hydrogenation of diphenylacetylene (DPA). Highly ordered PdIn NPs with a CsCl type structure revealed both high activity and selectivity to cis-stilbene even at full DPA conversion. Intermetallic compounds such as PdIn can be used to isolate contiguous Pd atoms with another base metal into single Pd sites, thereby increasing the catalytic selectivity of Pd while stabilizing the individual sites in the intermetallic structures. This work may provide new pathways for the synthesis of single-phase intermetallic NPs and future insights into a more rational design of bimetallic catalysts with specific catalytic properties.

Organogel-assisted porous organic polymer embedding Cu NPs for selectivity control in the semi hydrogenation of alkynes

Heteroatom-rich porous-organic-polymers (POPs) comprising highly cross-linked robust skeletons with high physical and thermal stability, high surface area, and tunable pore size distribution have garnered significant research interest owing to their versatile functionalities in a wide range of applications. Here, we report a newly developed organogel-assisted porous-organic-polymer (POP) supported Cu catalyst (Cu@TpRb-POP). The organogel was synthesized via a temperature induced gelation strategy, employing Schiff-base coupling between 2,4,6-triformylphloroglucinol aldehyde (Tp) and pararosaniline base (Rb). The gel is subsequently transformed to hierarchical porous organic structures without the use of any additive, thereby offering advantageous features including extremely low density, high surface area, a highly cross-linked framework, and a heteroatom-enriched backbone of the polymer. During the semi-hydrogenation of terminal and internal alkynes, the Cu@TpRb-POP-B catalyst with Cu embedded in the TpRb-POP structure consistently demonstrated improved selectivity towards alkenes compared to Cu@TpRb-POP-A, which contains Cu NPs exposed at the exterior surfaces of the POP support. Additionally, Cu@TpRb-POP-B showed higher stability and reusability than Cu@TpRb-POP-A. The superior performance of the Cu@TpRb-POP-B catalyst is attributed to the steric hindrance effect, which controls the product selectivity, as well as the synergistic interaction between the heteroatom-rich POP framework and the embedded Cu NPs. Both the effects are corroborated by experimental characterization of the catalysts and density functional theory (DFT) calculations.

Enabling Semihydrogenation of Alkynes to Alkenes by Using a Calcium Palladium Complex Hydride

Selective hydrogenation of alkynes to alkenes requires a catalytic site with suitable electronic properties for modulating the adsorption and conversion of alkyne, alkene as well as dihydrogen. Here, we report a complex palladium hydride, CaPdH₂, featured by electron-rich [PdH₂]^δ- sites that are surrounded by Ca cations that interacts with C₂H₂ and C₂H₄ via σ-bonding to Pd and unusual cation-π interaction with Ca, resulting in a much weaker chemisorption than those of Pd metal catalysts. Concomitantly, the dissociation of H₂ and hydrogenation of C₂H_x (x = 2-4) species experience significant energy barriers over CaPdH₂, which is fundamentally different from those reported Pd-based catalysts. Such a unique catalytic environment enables CaPdH₂, the very first complex transition-metal hydride catalyst, to afford a high alkene selectivity for the semihydrogenation of alkynes.

Pd homojunctions enable remarkable CO2 electroreduction

3D Pd aerogels with a controllable homojunction density are synthesized using an innovative melting-casting technology. The homojunction-rich Pd aerogels selectively reduce CO₂ to CO with a 92.3% faradaic efficiency and durability over 10 h, benefiting from the strong coupling between the electrons and the adsorbed intermediates at the phase-mismatch interface.