Phase-Change Composites Composed of Silicone Rubber and Pa@SiO2@PDA Double-Shelled Microcapsules with Low Leakage Rate and Improved Mechanical Strength

Immune-like sandwich multiple hotspots SERS biosensor for ultrasensitive detection of NDKA biomarker in serum

Developing the rapid, specific, and sensitive tumor marker NDKA biosensor has become an urgent need in the field of early diagnosis of colorectal cancer (CRC). Surface-enhanced Raman spectroscopy (SERS) with the advantages of high sensitivity, high resolution as well as providing sample fingerprint, enables rapid and sensitive detection of tumor markers. However, many SERS biosensors rely on boosting the quantity of Raman reporter molecules on individual nanoparticle surfaces, which can result in nanoparticle agglomeration, diminishing the stability and sensitivity of NDKA detection. Here, we proposed an immune-like sandwich multiple hotspots SERS biosensor for highly sensitive and stable analysis of NDKA in serum based on molecularly imprinted polymers and NDKA antibody. The SERS biosensor employs an array of gold nanoparticles, which are coated with a biocompatible polydopamine molecularly imprinted polymer as a substrate to specifically capture NDKA. Then the biosensor detects NDKA through Raman signals as a result of the specific binding of NDKA to the SERS nanotag affixed to the capture substrate along with the formation of multiple hotspots. This SERS biosensor not only avoids the aggregation of nanoparticles but also presents a solution to the obstacles encountered in immune strategies for certain proteins lacking multiple antibody or aptamer binding sites. Furthermore, the practical application of the SERS biosensor is validated by the detection of NDKA in serum with the lower limit of detection (LOD) of 0.25 pg/mL, meanwhile can detect NDKA of 10 ng/mL in mixed proteins solution, illustrating high sensitivity and specificity. This immune-like sandwich multiple hotspots biosensor makes it quite useful for the early detection of CRC and also provides new ideas for cancer biomarker sensing strategy in the future.

High-Performance Bioinspired Microspheres for Boosting Dental Adhesion

Dental adhesives are widely used in daily practice for minimally invasive restorative dentistry but suffer from bond degradation and biofilm attack. Bio-inspired by marine mussels having excellent surface-adhesion capability and high chemical affinity of polydopamine (PDA) to metal ions, herein, experimental zinc (Zn)-containing polydopamine-based adhesive formulation, further being referred to as "Zn-PDA@SiO2 "-incorporated adhesive is proposed as a novel dental adhesive. Different Zn contents (5 and 10 mm) of Zn-PDA@SiO2 are prepared. Considering the synergistic effect of Zn and PDA, Zn-PDA@SiO2 not only presents excellent antibacterial potential and notably inhibits enzymatic activity (soluble and matrix-bound proteases), but also exhibits superior biocompatibility and biosafety in vitro/vivo. The long-term bond stability is substantially improved by adding 5 wt% 5 mm Zn-PDA@SiO2 to the primer. The aged bond strength of the experimentally formulated dental adhesives applied in self-etch (SE) bonding mode is 1.9 times higher than that of the SE gold-standard adhesive. Molecular dynamics calculations indicate the stable formation of covalent bonds, Zn-assisted coordinative bonds, and hydrogen bonds between PDA and collagen. Overall, this bioinspired dental adhesive provides an avenue technology for innovative biomedical applications and has already revealed promising perspectives for dental restorative dentistry.

Phase Change Composite Microcapsules with Low-Dimensional Thermally Conductive Nanofillers: Preparation, Performance, and Applications

Phase change materials (PCMs) have been extensively utilized in latent thermal energy storage (TES) and thermal management systems to bridge the gap between thermal energy supply and demand in time and space, which have received unprecedented attention in the past few years. To effectively address the undesirable inherent defects of pristine PCMs such as leakage, low thermal conductivity, supercooling, and corrosion, enormous efforts have been dedicated to developing various advanced microencapsulated PCMs (MEPCMs). In particular, the low-dimensional thermally conductive nanofillers with tailorable properties promise numerous opportunities for the preparation of high-performance MEPCMs. In this review, recent advances in this field are systematically summarized to deliver the readers a comprehensive understanding of the significant influence of low-dimensional nanofillers on the properties of various MEPCMs and thus provide meaningful enlightenment for the rational design and multifunction of advanced MEPCMs. The composition and preparation strategies of MEPCMs as well as their thermal management applications are also discussed. Finally, the future perspectives and challenges of low-dimensional thermally conductive nanofillers for constructing high performance MEPCMs are outlined.

Flexible and Mechanically Enhanced Polyurethane Composite for γ-ray Shielding and Thermal Regulation

Microencapsulation of paraffin with lead tungstate shell (Pn@PWO) shows the drawbacks of low wettability and poor leakage-proof property and thermal reliability, restricting the application of phase change microcapsules. Herein, a novel paraffin@lead tungstate@silicon dioxide double-shelled microcapsule (Pn@PWO@SiO₂) has been successfully constructed by the emulsion-templated interfacial polycondensation and applied in the waterborne polyurethane (WPU). The results indicated that a SiO₂ layer with controlled thickness was formed on the PbWO₄ shell. The Pn@PWO@SiO₂ microcapsules have exhibited superior leakage-proof properties and thermal reliability through double-shelled protection, and the leakage rate decreased by at least 54.11% compared to that of Pn@PWO microcapsules. The SiO₂ layer with abundant polar groups ameliorated the wettability of microcapsules and the interfacial compatibility between microcapsules and the WPU matrix. The tensile strength of WPU/Pn@PWO@SiO₂-2 composites reached 10.98 MPa, which was over 7 times greater than that of WPU/Pn@PWO composites. In addition, WPU/Pn@PWO@SiO₂-2 composites with a latent heat capacity of over 41 J/g exhibited efficient phase change stability and γ-ray shielding properties. Also, the mass attenuation coefficients reached 1.38 cm²/g at 105.3 keV and 1.12 cm²/g at 86.5 keV, respectively. These properties will greatly promote the application of WPU/Pn@PWO@SiO₂ composites into γ-ray-shielding devices with thermal regulation.

Phase Change Microcapsules with a Polystyrene/Boron Nitride Nanosheet Hybrid Shell for Enhanced Thermal Management of Electronics

Organic shell material and phase change material (PCM) have low thermal conductivity, which reduces the heat absorption and release rate of microencapsulated phase change materials (MEPCMs). Boron nitride nanosheets (BNNSs) with high thermal conductivity can not only stabilize the oil phase as the Pickering emulsifier but also improve the thermal conductivity of MEPCMs as one of the shell components, thus facilitating the heat conduction in the microcapsule system. Herein, MEPCM with paraffin wax (PW) as the core material and polystyrene (PS) modified by BNNSs as the shell material (PW@PS/BNNS MEPCMs) are synthesized via Pickering emulsion polymerization. The structure of PW@PS/BNNS MEPCMs can be regulated by tuning the PW and BNNS contents, to achieve high latent heat and thermal conductivity. In comparison to pure PW, the thermal conductivity of MEPCMs-5 wt % BNNSs increases by 63.76% at 25 °C. The PW@PS/BNNS powder possesses a latent heat capacity of 166.3 J/g, corresponding to a high encapsulation ratio of 80.77%. These properties endow the prepared MEPCMs with excellent thermal regulation properties. We also propose the formation mechanism of PW@PS/BNNS MEPCMs via Pickering emulsion polymerization for the first time, which will guide the MEPCM fabrication toward a reliable direction.

Cadmium Sulfide-Reinforced Double-Shell Microencapsulated Phase Change Materials for Advanced Thermal Energy Storage

Phase change materials (PCMs) are widely used to improve energy utilization efficiency due to their high energy storage capacity. In this study, double-shell microencapsulated PCMs were constructed to resolve the liquid leakage issue and low thermal conductivity of organic PCMs, which also possess high thermal stability and multifunctionality. We used assembly to construct an inorganic-organic double shell for microencapsulate PCMs, which possessed the unprecedented synergetic properties of a cadmium sulfide (CdS) shell and melamine-formaldehyde polymeric shell. The scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images confirmed the well-designed double-shell structure of the microcapsules, and the CdS was successfully assembled as the second shell on the surface of the polymer shell. The differential scanning calorimeter (DSC) showed that the double-shell microcapsules had a high enthalpy of 114.58 J/g, which indicated almost no changes after experiencing 100 thermal cycles, indicating good thermal reliability. The microcapsules also showed good shape stability and antileakage performance, which displayed no shape change and leakage after heating at 60 °C for 30 min. In addition, the photothermal conversion efficiency of the double-shell microcapsules reached 91.3%. Thus, this study may promote the development of microencapsulated PCMs with multifunctionality, offering considerable application prospects in intelligent temperature management for smart textiles and wearable electronic devices in combination with their solar thermal energy conversion and storage performance.

Biofriendly Waste Shell Powders/Polylactic Acid Composites for Antibacterial Engineering Applications

With the rapid progress of agriculture and aquaculture, waste shells are harming the environment because of large production, and highly valued recycling is now holding more attention. However, there are still no good ways for simultaneously solving the poor mechanical and antibacterial performance during the recycling process. In this work, antibacterial shell-grafting-Ag powders/polylactic acid (shell-g-Ag/PLA) biocompatible composites, with comparable mechanical properties to industrial polymer counterparts, were prepared via the in situ reduction of Ag ions on surfaces of polydopamine-modified shell powders. The introduction of Ag particles increases the compatibility on the interface and endows the composites with antibacterial performance by inheriting the prominent characteristic from Ag. Without scarifying the mechanical properties by improving the crystallinity and interface, the loaded Ag particles in the composites endowed the composites with valorized antibacterial performance, evidenced by a bacterial inhibition width from 0 to ∼3.29 mm. The biofriendly composites, together with comparable mechanical properties to industrial PLA products, can serve as a sustainable material to be applied in the field of disposable packaging.