Highly Efficient Photocatalytic CO2 Reduction in Two-Dimensional Ferroelectric CuInP2S6 Bilayers

Manipulating Ferroelectric Polarization and Spin Polarization of 2D CuInP2S6 Crystals for Photocatalytic CO2 Reduction

Manipulating electronic polarizations such as ferroelectric or spin polarizations has recently emerged as an effective strategy for enhancing the efficiency of photocatalytic reactions. This study demonstrates the control of electronic polarizations modulated by ferroelectric and magnetic approaches within a two-dimensional (2D) layered crystal of copper indium thiophosphate (CuInP2S6) to boost the photocatalytic reduction of CO2. We investigate the substantial influence of ferroelectric polarization on the photocatalytic CO2 reduction efficiency, utilizing the ferroelectric-paraelectric phase transition and polarization alignment through electrical poling. Additionally, we explore enhancing the CO2 reduction efficiency by harnessing spin electrons through the synergistic introduction of sulfur vacancies and applying a magnetic field. Several advanced characterization techniques, including piezoresponse force microscopy, ultrafast pump-probe spectroscopy, in situ X-ray absorption spectroscopy, and in situ diffuse reflectance infrared Fourier transformed spectroscopy, are performed to unveil the underlying mechanism of the enhanced photocatalytic CO2 reduction. These findings pave the way for manipulating electronic polarizations regulated through ferroelectric or magnetic modulations in 2D layered materials to advance the efficiency of photocatalytic CO2 reduction.

Bi3O2.5Se2: a two-dimensional high-mobility polar semiconductor with large interlayer and interfacial charge transfer

Two-dimensional semiconductors with large intrinsic polarity are highly attractive for applications in high-speed electronics, ultrafast and highly sensitive photodetectors and photocatalysis. However, previous studies mainly focus on neutral layered polar 2D materials with limited vertical dipoles and electrostatic potential difference (typically <1.5 eV). Here, using the first-principles calculations, we systematically investigated the polarity of few-layer Bi3O2.5Se2 semiconductors with ultrahigh predicted room-temperature carrier mobility (1790 cm2 V-1 s-1 for the monolayer). Thanks to its unique non-neutral layered structure, few-layer Bi3O2.5Se2 contributes to a substantial interlayer charge transfer (>0.5 e-) and almost the highest electrostatic potential difference (ΔΦ) of ∼4 eV among the experimentally attainable 2D layered materials. More importantly, positioning graphene on different charged layers ([Bi2O2.5]+ or [BiSe2]-) switches the charge transfer direction, inducing selective n-doping or p-doping. Furthermore, we can use polar Bi3O2.5Se2 as an exemplary assisted gate to gain additional holes or electrons except for the external electric field, thus breaking the traditional limitations of gate tunability (∼1014 cm-2) observed in experimental settings. Our work not only expands the family of polar 2D semiconductors, but also makes a conceptual advance on using them as an assisted gate in transistors.

Enhancing photocatalytic CO2 reduction with TiO2-based materials: Strategies, mechanisms, challenges, and perspectives

The concentration of atmospheric CO2 has exceeded 400 ppm, surpassing its natural variability and raising concerns about uncontrollable shifts in the carbon cycle, leading to significant climate and environmental impacts. A promising method to balance carbon levels and mitigate atmospheric CO2 rise is through photocatalytic CO2 reduction. Titanium dioxide (TiO2), renowned for its affordability, stability, availability, and eco-friendliness, stands out as an exemplary catalyst in photocatalytic CO2 reduction. Various strategies have been proposed to modify TiO2 for photocatalytic CO2 reduction and improve catalytic activity and product selectivity. However, few studies have systematically summarized these strategies and analyzed their advantages, disadvantages, and current progress. Here, we comprehensively review recent advancements in TiO2 engineering, focusing on crystal engineering, interface design, and reactive site construction to enhance photocatalytic efficiency and product selectivity. We discuss how modifications in TiO2's optical characteristics, carrier migration, and active site design have led to varied and selective CO2 reduction products. These enhancements are thoroughly analyzed through experimental data and theoretical calculations. Additionally, we identify current challenges and suggest future research directions, emphasizing the role of TiO2-based materials in understanding photocatalytic CO2 reduction mechanisms and in designing effective catalysts. This review is expected to contribute to the global pursuit of carbon neutrality by providing foundational insights into the mechanisms of photocatalytic CO2 reduction with TiO2-based materials and guiding the development of efficient photocatalysts.

Ferroelectric Polarization and Single-Atom Catalyst Synergistically Promoting CO2 Photoreduction of CuBiP2Se6

Further improving the activity and selectivity of photocatalytic CO2 reduction remains a challenge. Herein, we propose a new strategy for synergistically promoting photocatalytic CO2 reduction by combining two-dimensional (2D) ferroelectric polarization and single-atom catalysis. Our calculations showed that the ferroelectric polarization of CuBiP2Se6 provides the internal driving force for the separation and migration of photogenerated carriers, which provides a prerequisite for enhancing the photocatalytic efficiency. In addition, the introduction of single Ag atoms can act as an electron reservoir to significantly modify the bonding configurations on the surface through proper static electron transfer, thus effectively promoting the adsorption and activation of CO2 molecules. More importantly, we found that switching the ferroelectric polarization can synergistically optimize the limiting potential as well as control the final products. This study provides a new approach for enhancing the catalytic activity and selectivity of photocatalytic CO2 reduction.

Efficient photoreduction of carbon dioxide to ethanol using diatomic nitrogen-doped black phosphorus

Successful conversion of CO2 into C2 products requires the development of new catalysts that overcome the difficulties in efficient light harvesting and CO-CO coupling. Herein, density functional theory (DFT) is used to assess the photoreduction properties of nitrogen-doped black phosphorus. The geometric structure, redox potential, first step of hydrogenation activation, CO desorption, and CO-CO coupling are systematically calculated, based on which the diatomic nitrogen-doped black phosphorus (N2@BPV) stands out. The calculated results of the CO2RR pathway demonstrate that N2@BPV has excellent selectivity and high activity for CH3CH2OH production. The results of the time-dependent ab initio nonadiabatic molecular dynamics simulation show that the diatomic N active sites of N2@BPV facilitate charge separation and inhibit electron-hole recombination. In addition, the activation mechanism of CO2 is studied. The main reason for CO2 activation is attributed to the imbalance in electron transfer that destroys the symmetry of CO2. We expect that our study will offer some theoretical guidance in CO2 conversion.

Substrate Ferroelectric Proximity Effects Have a Strong Influence on Charge Carrier Lifetime in Black Phosphorus

By stacking monolayer black phosphorus (MBP) with nonpolarized and ferroelectric polarized bilayer hexagonal boron nitride (h-BN), we demonstrate that ferroelectric proximity effects have a strong influence on the charge carrier lifetime of MBP using nonadiabatic (NA) molecular dynamics simulations. Through enhancing the motion of phosphorus atoms, ferroelectric polarization enhances the overlap of electron-hole wave functions that improves NA coupling and decreases the bandgap, resulting in a rapid electron-hole recombination completing within a quarter of nanoseconds, which is two times shorter than that in nonpolarized stackings. In addition to the dominant in-plane Ag2 mode in free-standing MBP, the out-of-plane high-frequency Ag1 and low-frequency interlayer breathing modes presented in the heterojunctions drive the recombination. Notably, the resonance between the breathing mode within bilayer h-BN and the B1u mode of MBP provides an additional nonradiative channel in ferroelectric stackings, further accelerating charge recombination. These findings are crucial for charge dynamics manipulation in two-dimensional materials via substrate ferroelectric proximity effects.

Insights into Photogenerated Carrier Dynamics and Overall Water Splitting of the CrS3/GeSe Heterostructure

Based on the nonadiabatic molecular dynamics (NAMD) simulations and the first-principles calculations, we explore the overall water-splitting schemes and the photogenerated carrier dynamics for two configurations (CG and CyG) of the CrS3/GeSe van der Waals heterostructures. The photocatalytic direct Z-schemes and carrier migration pathways for hydrogen and oxygen evolution reactions (HER/OER) are constructed based on the electronic properties. The solar-to-hydrogen efficiency (η'STH values) of the schemes can reach 10.60% and 10.17% and further rise under tensile strain. The NAMD results demonstrate similar transfer times of the electron/hole for HER/OER and more rapid electron-hole recombination in CG enables it to be superior to CyG in photocatalytic performance. Moreover, the Gibbs free energy indicates that both the HERs and OERs turn to spontaneously proceed with CG and CyG at pH = 0-12.37 and pH = 2.55-11.01, respectively. These facts reveal that the CrS3/GeSe heterostructure is promising in photocatalytic overall water splitting.

A multi-factor adjustable PtSe2/GaN van der Waals heterostructure with enhanced photocatalytic performance

Two-dimensional van der Waals heterostructures with multiple tunable approaches in electronic and optical properties are highly superior for photocatalysis and novel devices. By applying first-principles calculations, we systematically studied the electronic structure, optical absorption, carrier mobility and solar-to-hydrogen efficiency of PtSe2/GaN heterostructures, which are affected by different thicknesses, varying directions of polarization of the GaN nanosheets and applied mechanical strain of the whole system. The results indicate that these heterostructures exhibit thermodynamic stability at room-temperature (300 K), and most configurations have type-II band alignment, among which the heterostructure consisting of GaN trilayers and PtSe2 shows high visible-light absorption (1.71 × 105 cm-1) and ultra-wide range of pH values (pH = 0-14) for the photocatalytic water splitting reaction and exceedingly high overpotential for the hydrogen evolution reaction (3.375 eV). Simultaneously, being two of the most significant parameters of photocatalysis and devices, the carrier mobility and solar-to-hydrogen efficiency have also been calculated, respectively, reaching up to 1601 cm2 V-1 s-1 and 17.2%. Moreover, the photoelectrical properties can be highly tuned through further biaxial strain engineering; especially, the visible-light absorption can be enhanced to 2.85 × 105 cm-1 by applying 6% compression strain. Thus, the PtSe2/GaN heterostructure we proposed shows a broad prospect for photocatalytic water splitting.

Armchair Janus WSSe Nanotube Designed with Selenium Vacancy as a Promising Photocatalyst for CO2 Reduction

Photocatalytic conversion of carbon dioxide into chemical fuels offers a promising way to not only settle growing environmental problems but also provide a renewable energy source. In this study, through first-principles calculation, we found that the Se vacancy introduction can lead to the transition of physical-to-chemical CO₂ adsorption on Janus WSSe nanotube. Se vacancies work at the adsorption site, which significantly improves the amount of transferred electrons at the interface, resulting in the enhanced electron orbital hybridization between adsorbents and substrates, and promising the high activity and selectivity for carbon dioxide reduction reaction (CO₂RR). Under the condition of illumination, due to the adequate driving forces of photoexcited holes and electrons, oxygen generation reaction (OER) and CO₂RR can occur spontaneously on the S and Se sides of the defective WSSe nanotube, respectively. The CO₂ could be reduced into CH₄, meanwhile, the O₂ is produced by the water oxidation, which also provides the hydrogen and electron source for the CO₂RR. Our finding reveals a candidate photocatalyst for obtaining efficient photocatalytic CO₂ conversion.

Efficient photocatalytic hydrogen evolution and CO2 reduction by HfSe2/GaAs3 and ZrSe2/GaAs3 heterostructures with direct Z-schemes

The elaborate configuration of the heterostructure is crucial and challenging to achieve high solar-to-hydrogen efficiency or CO₂ reduction efficiency . Here, we predict two heterostructures composed of HfSe₂, ZrSe₂, and GaAs₃ monolayers. The maximum of 42.71%/35.12% with the heterostructures can be reached with the perfect match between the bandgap and band edges. The configurations of the heterostructures are discovered from 12 possible stacking types of the three monolayers. The formation energy, potentials of band edges, carrier mobilities, and optical absorption were used to identify the feasibility of the CO₂ reduction reaction (CO₂RR), the hydrogen evolution reaction (HER), and the oxygen evolution reaction (OER). The and based on overpotentials and bandgaps and the Gibbs free energies (ΔGs) are evaluated to quantificationally access the photocatalytic performance of the constructed heterostructures. The results demonstrate that high can be obtained for the solar photocatalytic Z-schemes with the HfSe₂/GaAs₃ and ZrSe₂/GaAs₃ heterostructures, and these values can be further enhanced through strain engineering. Moreover, small changes in ΔGs were observed for HER, OER, and CO₂RR. Therefore, the two heterostructures have excellent performance in photocatalytic hydrogen evolution and CO₂ reduction. The results of the electronic properties revealed that the delicate matching of the projected band edges of the monolayers in the heterostructures is responsible for the high photocatalytic performance.

Metal-Free Carbon Nitride Nanosheet Supported the Pentacoordinated Silicon Intermediates for Photocatalytic Overall Water Splitting

Photocatalytic overall water splitting is a promising approach to overcome the environmental and energy crisis. However, developing effective photocatalysts with well activity, light absorption, and photogenerated carrier lifetime is still a challenge. Herein, combining extensive first-principles and nonadiabatic molecular dynamics calculations, we find that microporous carbon-nitride nanosheets with a pyridinic nitrogen, such as C₂N and C₆N₆, possess the pentacoordinated silicon intermediates' bonding environment. The pentacoordinated silicon as intermediates exhibits good photocatalytic performance for the difficult four-electronic oxygen evolution reaction. The overpotential is only 0.55 V for C₂N, which is significantly lower than that of the tetracoordinated silicon intermediates (2.00 V). Simultaneously, the decoration of the silicon group not only widens the absorption range of visible light but also maintains the lifetime of photogenerated carriers on the nanosecond scale, which enhances the application efficiency of solar energy. Our work paves a new route for advancing photocatalytic overall water splitting.

Mo2CF2/WS2: Two-Dimensional Van Der Waals Heterostructure for Overall Water Splitting Photocatalyst from Five-Step Screening

With the increasing demand for renewable energy and clean energy, photocatalysis is considered an economical and feasible source of energy. In this work, we select two-dimensional (2D) materials of X₂CT₂ (X = Cr, Hf, Mo, Sc, Ti, Zr; T = Cl, F, O, OH), Mxene, and MS₂ (M = Mo, W) to form 20 systems of 2D van der Waals (vdW) heterostructures. We establish five screening steps, and the 2D Mo₂CF₂/WS₂ vdW heterostructures meet all the screening conditions. Mo₂CF₂/WS₂ is a type II semiconductor with a band gap of 1.58 eV, proper band edge position and high solar-to-hydrogen efficiency (17.15%) and power conversion efficiency (23.4%). An excellent electron-hole recombination time of 21.2 ps and electron (hole) migration time of 149 (265) fs are obtained in the 2D Mo₂CF₂/WS₂ vdW heterostructure. In addition, the calculation results of Gibbs free energy show that a hydrogen reduction reaction and water oxidation reaction can proceed smoothly under the driving of photogenerated holes.

Insights into Photoinduced Carrier Dynamics and Overall Water Splitting of Z-Scheme van der Waals Heterostructures with Intrinsic Electric Polarization

Using first-principles calculations in combination with nonadiabatic molecular dynamics (NAMD), we propose novel heterostructures of carbon nitride (C₇N₆) and the Janus GaSnPS monolayer as promising direct Z-scheme photocatalysts for solar-driven overall water splitting. The out-of-plane electric field due to the electric polarization which is dependent on the stacking pattern alters the band alignment and catalytic activity of the heterostructures. The relatively strong interfacial nonadiabatic coupling and long quantum coherence time accelerate the interlayer carrier recombination, enabling a direct Z-scheme photocatalytic mechanism. More importantly, the redox ability of the remanent photogenerated carriers in the Z scheme is strong enough to trigger both the hydrogen evolution reaction (HER) and oxygen reduction reaction (OER) simultaneously without the help of sacrificial agents. Our work reveals a fundamental understanding of ultrafast charge carrier dynamics at vdW heterointerfaces as well as new design prospects for highly efficient direct Z-scheme photocatalysts.

Rational Design of Black Phosphorus-Based Direct Z-Scheme Photocatalysts for Overall Water Splitting: The Role of Defects

Black phosphorus (BP) has received increasing interest as a promising photocatalyst for water splitting. Nevertheless, exploring the underlying hydrogen evolution reaction (HER) mechanism and improving the water oxidizing ability remains an urgent task. Here, using first-principles calculations, we uncover the role of point defects in improving the HER activity of BP photocatalysts. We demonstrate that the defective phosphorene can be effectively activated by the photoinduced electrons under solar light, exhibiting high HER catalytic activity in a broad pH range (0-10). Besides, we propose that the direct Z-scheme in the defective BP/SnSe₂ heterobilayer is quite feasible for photocatalytic overall water splitting. This mechanism could be further verified based on the excited state dynamics method. The role of point defects in the photocatalytic mechanism provides useful insights for the development of BP photocatalysts.

Self-Enhancing Photoelectrochemical Properties in van der Waals Ferroelectric CuInP2S6 by Photoassisted Acid Hydrolysis

Transition metal thiophosphate, CuInP₂S₆ (CIPS), has recently emerged as a potentially promising material for photoelectrochemical (PEC) water splitting due to its intrinsic ferroelectric polarization for spontaneous photocarrier separation. However, the poor kinetics of the hydrogen evolution reaction (HER) greatly limits its practical applications. Herein, we report self-enhancing photocatalytic behavior of a CIPS photocathode due to chemically driven oxygen incorporation by photoassisted acid oxidation. The optimal oxygen-doped CIPS demonstrates a >1 order of magnitude enhancement in the photocurrent density compared to that of pristine CIPS. Through comprehensive spectroscopic and microscopic investigations combined with theoretical calculations, we disclose that oxygen doping will lower the Fermi level position and decrease the HER barrier, which further accelerates charge separation and improves the HER activity. This work may deliver a universal and facile strategy for improving the PEC performance of other van der Waals metal thiophosphates.

Recycled Bifunctional Heterostructure Material: g-GaN/SnS for Photocatalytic Decomposition of Water and Efficient Detection of NO2

Recently, the energy crisis and environmental pollution problems have become increasingly severe. There is an urgent need to develop a class of multifunctional materials that can both produce clean energy and detect harmful gases. Herein, we propose a g-GaN/SnS heterostructure and explored its dual-optimal performance in photocatalytic hydrogen production and gas detection. Our results demonstrated that the g-GaN/SnS heterostructure has a suitable type II band alignment and excellent absorption in the visible range, which both indicate its potential application in photocatalysis. Furthermore, when the g-GaN/SnS heterostructure acted as a gas detection material, it was consistently susceptible to NO₂ gas molecules, according to charge transfer. Additionally, it has a very suitable material recovery time (∼0.5 h) when used for NO₂ detection, illustrating the recyclability of the material. Interestingly, the applied electric field of -0.4 V/Å can greatly increase the absorption coefficient in the visible range to 150% of the original. Also, the applied electric field of 0.6 V/Å can substantially enhance the gas detection sensitivity by 27% compared to the case without the electric field. Thus, the g-GaN/SnS heterostructure we proposed not only has the advantage of being bifunctional but also has the potential to be recycled.

Multi-dimensional designer catalysts for negative emissions science (NES): bridging the gap between synthesis, simulations, and analysis

Negative emissions technologies will play a critical role in limiting global warming to sustainable levels. Electrocatalytic and/or photocatalytic CO2 reduction will likely play an important role in this field moving forward, but efficient, selective catalyst materials are needed to enable the widespread adoption of these processes. The rational design of such materials is highly challenging, however, due to the complexity of the reactions involved as well as the large number of structural variables which can influence behavior at heterogeneous interfaces. Currently, there is a significant disconnect between the complexity of materials systems that can be handled experimentally and those that can be modeled theoretically with appropriate rigor and bridging these gaps would greatly accelerate advancements in the field of Negative Emissions Science (NES). Here, we present a perspective on how these gaps between materials design/synthesis, characterization, and theory can be resolved, enabling the rational development of improved materials for CO2 conversion and other NES applications.

An efficient hydrogen evolution photocatalyst of Rh@Cr2O3 loaded PbMoO4 twenty-six facets polyhedron

Shape anisotropic semiconductor is advanced catalyst for resolving energy crises. However, modification studies are still needed to overcome its intrinsic disadvantages, such as the lack of active sites. For this...