Engineering an Interfacial Facet of S-Scheme Heterojunction for Improved Photocatalytic Hydrogen Evolution by Modulating the Internal Electric Field

Improved photocatalytic performance of cobalt doped ZnS decorated with graphene nanostructures under ultraviolet and visible light for efficient hydrogen production

Highly dispersed Cobalt doped ZnS nanostructures were successfully fabricated on the surfaces of graphene sheets via a simple hydrothermal method. X-ray diffraction (XRD), X-ray photocurrent spectroscopy (XPS), Raman spectroscopy (RS), Fourier transform infrared spectroscopy (FTIR) and Scanning electron microscopy (SEM) were utilized to analyze the structural characteristics of the cobalt doped ZnS decorated with grapheneCo x Zn 1 - x S rGO nanostructures (NSs). UV-visible optical absorption (UV-vis) studies were conducted to investigate their optical properties. In laboratory studies utilizing water and visible light, the photocatalytic activity ofCo x Zn 1 - x S rGO NSs at (x = 0, 1, 2, 4 and 6 atm.%) were evaluated. Graphite Oxide (GO) was successfully transformed into sheets of graphene andCo x Zn 1 - x S rGO NSs possessed a crystalline structure according to the findings of XRD, RS and FTIR analysis. SEM investigation showed graphene sheets enhanced with ZnS NSs possessed cuboidal, spheroidal form of structure and displayed a paper like appearance. UV-vis confirmed a noticeable rapid increase in transmittance along the UV wavelength area and confirmed a highly transparent NSs in the wavelength range of (180-800 nm). Calculations using density functional theory (DFT) revealed that the Co NSs have more negative conduction bands than ZnS, allowing for effective electron transfer from cobalt to ZnS and exhibiting a band gap decrease as Co content increased. TheCo 0.04 Zn 0.96 S rGO NSs sample had the highest photocatalytic activity, measured at 7648.9 μ mol h - 1 . A combination of improved dispersion properties, greater surface area, increased absorption and enhanced transfer of photogenerated electrons,Co x Zn 1 - x S rGO NSs increased the photocatalytic hydrogen generation activity.

A compendium of all-in-one solar-driven water splitting using ZnIn2S4-based photocatalysts: guiding the path from the past to the limitless future

Photocatalytic water splitting represents a leading approach to harness the abundant solar energy, producing hydrogen as a clean and sustainable energy carrier. Zinc indium sulfide (ZIS) emerges as one of the most captivating candidates attributed to its unique physicochemical and photophysical properties, attracting much interest and holding significant promise in this domain. To develop a highly efficient ZIS-based photocatalytic system for green energy production, it is paramount to comprehensively understand the strengths and limitations of ZIS, particularly within the framework of solar-driven water splitting. This review elucidates the three sequential steps that govern the overall efficiency of ZIS with a sharp focus on the mechanisms and inherent drawbacks associated with each phase, including commonly overlooked aspects such as the jeopardising photocorrosion issue, the neglected oxidative counter surface reaction kinetics in overall water splitting, the sluggish photocarrier dynamics and the undesired side redox reactions. Multifarious material design strategies are discussed to specifically mitigate the formidable limitations and bottleneck issues. This review concludes with the current state of ZIS-based photocatalytic water splitting systems, followed by personal perspectives aimed at elevating the field to practical consideration for future endeavours towards sustainable hydrogen production through solar-driven water splitting.

Construction of An Artificial Photosynthesis System with A Single CdS QDs-Ferritin Hybrid Molecule

Establishing artificial photosynthesis systems in a simple but effective manner to mitigate the greenhouse effect and address the energy crisis remains challenging. The combination of photocatalysis technology with bioengineering is an emerging field with great potential to construct such artificial photosynthesis systems, but so far, it has barely been explored in this area. Herein, an artificial photocatalysis platform is constructed with high CO2 conversion and H2O splitting capability by integration of CdS QDs into the intra-subunit interface of H-type ferritin (Marsupenaeus japonicus), a natural ferroxidase through protein interface redesign. The crystal structure of the synthesized CdS QDs with engineered ferritin molecules as bio-templates confirmed the design at an atomic level. Notably, upon absorbing desirable visible light (≈420 nm), such a single CdS-ferritin hybrid molecule is able to selectively catalyze the reduction of CO2 into HCOOH (≈90%), meanwhile catalyzing the oxidation of H2O into O2 in an aqueous environment. The O2 production rate reached to 180 µmol g-1 h-1, and the HCOOH output hit almost 800 µmol g-1 h-1. This work advances the utilization of the four-helix bundle structure for crafting artificial photosynthesis systems, facilitating the seamless integration of bioengineering and photocatalysis technology.

Preparation and Application of a Novel S-Scheme Nanoheterojunction Photocatalyst (LaNi0.6Fe0.4O3/g-C3N4)

Rapid recombination of photogenerated electrons and holes affects the performance of a semiconductor device and limits the efficiency of photocatalytic water splitting for hydrogen production. The use of an S-scheme nanoscale heterojunction catalyst for the separation of photogenerated charge carriers is a feasible approach to achieve high-efficiency photocatalytic hydrogen evolution. Therefore, we synthesized a three-dimensional S-scheme nanoscale heterojunction catalyst (LaNi0.6Fe0.4O3/g-C3N4) and investigated its activity in photocatalytic water splitting. An analysis of the band structure (XPS, UPS, and Mott-Schottky) indicated effective interfacial charge transfer in an S-scheme nanoscale heterojunction composed of two n-type semiconductors. X-ray photoelectron spectroscopy (XPS) and electron paramagnetic resonance (EPR) spectroscopy confirmed that the light-induced charge transfer followed the S-scheme mechanism. Based on the capture test (EPR) of •OH free radicals, it can be seen that the enhanced activity is attributed to the S-scheme carrier migration mechanism in heterojunction, which promotes the rapid adsorption of H+ by the abundant amino sites in g-C3N4, thus effectively generating H2. The 2D/2D LaNi0.6Fe0.4O3/g-C3N4 heterojunction has a good interface and produces a built-in electric field, improving the separation of e- and h+ while increasing the oxygen vacancy. The synergistic effect of the heterostructure and oxygen vacancy makes the photocatalyst significantly better than LaNi0.6Fe0.4O3 and g-C3N4 in visible light. The hydrogen evolution rate of the composite catalyst (LaNi0.6Fe0.4O3/g-C3N4-70 wt %) was 34.50 mmol·h-1·g-1, which was 40.6 times and 9.2 times higher than that of the catalysts (LaNiO3 and g-C3N4), respectively. After 25 h of cyclic testing, the catalyst (LaNi0.6Fe0.4O3/g-C3N4-70 wt %) composite material still exhibited excellent hydrogen evolution performance and photostability. It was confirmed that the synergistic effect between abundant active sites, enriched oxygen vacancies, and 2D/2D heterojunctions improved the photoinduced carrier separation and the light absorption efficiency of visible light. This study opens up new possibilities for the logical design of efficient photodecomposition using 2D/2D heterojunctions combined with oxygen vacancies.

Doping engineering in S-scheme composite for Regulating the selectivity of photocatalytic CO2 reduction

Regulating product selectivity in photocatalytic CO2 reduction to enhance the yield of valuable hydrocarbons remains a formidable challenge because of the diversity of reduction products and the competitive reduction of H2O. Herein, ultrathin Bi2O3/ Co-doped SrBi4Ti4O15 S-scheme photocatalysts (Co-BS) were synthesized using a hydrothermal method. The Bi2O3/Co-doped SrBi4Ti4O15 photocatalyst exhibited significantly higher selectivity for CH4 (62.3 μmolg-1) and CH3OH (54.1 μmolg-1) in CO2 reduction compared with pure SrBi4Ti4O15 (27.2 and 0.8 μmolg-1) and the Bi2O3/SrBi4Ti4O15 S-scheme without Co (30.2 and 0 μmolg-1). The experimental results demonstrated that the inclusion of Co into SrBi4Ti4O15 expanded the range of light absorption and generated an internal electric field between Co-doped SrBi4Ti4O15 and Bi2O3. Density functional theory calculations and other experimental findings confirmed the formation of a new doping energy level in the Bi2O3/SrBi4Ti4O15 S-scheme heterojunction after Co doping. The valence band electrons of Bi2O3/SrBi4Ti4O15 transitioned to the Co-doped level because of the interconversion between Co3+ and Co2+ under the action of the internal electric field. Furthermore, the corresponding characterizations revealed that the adsorption and electron transfer rates of the surface active sites were accelerated after Co doping, enhancing electron involvement in the photocatalytic reaction process. This study presented a metal-doped S-scheme heterojunction approach for CO2 reduction to produce high-value products, enhancing the conversion of solar energy into energy resources.

In Situ Etching-Hydrolysis Strategy To Construct an In-Plane ZnIn2S4/In(OH)3 Heterojunction with Enhanced CO2 Photoreduction Performance

The in-plane heterojunctions with atomic-level thickness and chemical-bond-connected tight interfaces possess high carrier separation efficiency and fully exposed surface active sites, thus exhibiting exceptional photocatalytic performance. However, the construction of in-plane heterojunctions remains a significant challenge. Herein, we prepared an in-plane ZnIn2S4/In(OH)3 heterojunction (ZISOH) by partial conversion of ZnIn2S4 to In(OH)3 through the addition of H2O2. This in situ oxidation etching-hydrolysis approach enables the ZISOH heterojunction to not only preserve the original nanosheet morphology of ZnIn2S4 but also form an intimate interface. Moreover, generated In(OH)3 serves as an electron-accepting platform and also promotes the adsorption of CO2. As a result, the heterojunction exhibits a remarkably enhanced performance for photocatalytic CO2 reduction. The production rate and selectivity of CO reach 1760 μmol g-1 h-1 and 78%, respectively, significantly higher than those of ZnIn2S4 (842 μmol g-1 h-1 and 65%). This work puts forward a feasible and facile approach to construct in-plane heterojunctions to enhance the photocatalytic performance of two-dimensional metal sulfides.

Synergistic Engineering of Energy Band Alignment and Interfacial Electric Field Distribution over Bi-bismuth-Based Hetero-nanofibers for Boosting Visible-Light-Driven Photocatalytic Ammonia Synthesis and Antibiotic Removal

Synergistic engineering of energy band alignment and interfacial electric field distribution is essential for photocatalyst design but is still challenging because of the limitation on refined regulation in the nanoscale. This study addresses the issue by employing surface modification and thermal-induced phase transformation in Bi2MoO6/BixOyIz hetero-nanofiber frameworks. The energy band alignment switches from a type-II interface to a Z-scheme contact with stronger redox potentials and inhibited electron traps, and the optimized built-in electric field distribution could be reached based on experimental and theoretical investigations. The engineered hetero-nanofibers exhibit outstanding visible-light-driven photocatalytic nitrogen reduction activity (605 μmol/g/h) and tetracycline hydrochloride removal rate (81.5% within 30 min), ranking them among the top-performing bismuth series materials. Furthermore, the photocatalysts show promise in activating advanced oxidants for efficient organic pollutant degradation. Moreover, the Bi2MoO6/Bi5O7I hetero-nanofibers possess good recycling stability owing to their three-dimensional network structure. This research offers valuable insights into heterojunction design for environmental remediation and industrial applications.

Low-Cytotoxic Core-Sheath ZnO NWs@TiO2-xNy Triggered Piezo-photocatalytic Antibacterial Activity

Sonophotodynamic antimicrobial therapy (SPDAT) is recognized as a highly efficient biomedical treatment option, known for its versatility and remarkable healing outcomes. Nevertheless, there is a scarcity of sonophotosensitizers that demonstrate both low cytotoxicity and exceptional antibacterial effectiveness in clinical applications. In this paper, a novel ZnO nanowires (NWs)@TiO2-xNy core-sheath composite was developed, which integrates the piezoelectric effect and heterojunction to build dual built-in electric fields. Remarkably, it showed superb antibacterial effectiveness (achieving 95% within 60 min against S. aureus and ∼100% within 40 min against E. coli, respectively) when exposed to visible light and ultrasound. Due to the continuous interference caused by light and ultrasound, the material's electrostatic equilibrium gets disrupted. The modification in electrical properties facilitates the composite's ability to attract bacterial cells through electrostatic forces. Moreover, Zn-O-Ti and Zn-N-Ti bonds formed at the interface of ZnO NWs@TiO2-xNy, further enhancing the dual internal electric fields to accelerate the excited carrier separation to generate more reactive oxygen species (ROS), and thereby boosting the antimicrobial performance. In addition, the TiO2 layer limited Zn2+ dissolution into solution, leading to good biocompatibility and low cytotoxicity. Lastly, we suggest a mechanistic model to offer practical direction for the future development of antibacterial agents that are both low in toxicity and high in efficacy. In comparison to the traditional photodynamic therapy systems, ZnO NWs@TiO2-xNy composites exhibit super piezo-photocatalytic antibacterial activity with low toxicity, which shows great potential for clinical application as an antibacterial nanomaterial.

Photothermal Synergistic Catalysis over Defective Zn3In2S6 for CO2 Fixation

Carbon dioxide (CO2) cycloaddition not only produces highly valued cyclic carbonate but also utilizes CO2 as C1 resources with 100% atomic efficiency. However, traditional catalytic routes still suffer from inferior catalytic efficiency and harsh reaction conditions. Developing multienergy-field catalytic technology with expected efficiency offers great opportunity for satisfied yield under mild conditions. Herein, Zn3In2S6 with sulfur vacancies (Sv) was fabricated with the assistance of cetyltrimethylammonium bromide (CTAB), which is further employed for photothermally driven CO2 cycloaddition first. Photoluminescence spectroscopy and photoelectrochemical characterization demonstrated its superior separation kinetics of photoinduced carriers induced by defect engineering. The temperature-programmed desorption (TPD) technique indicated its excellent Lewis acidity-basicity characters. Due to the combination of above merits from photocatalysis and thermal catalysis, defective Zn3In2S6-Sv achieved a yield as high as 73.2% for cyclic carbonate at 80 °C under blue LED illumination within 2 h (apparent quantum yield of 0.468% under illumination of 380 nm monochromatic light at 36 mW·cm-2), which is 2.9, 2.0, and 6.9 times higher than that in dark conditions and those of pristine Zn3In2S6 and industrial representative tetrabutylammonium bromide (TBAB) thermal-catalysis process under the same conditions, respectively. The synergistic reaction path of photocatalysis and thermal catalysis was discriminated by theoretical calculation. This work provides new insights into the photothermal synergistic catalysis CO2 cycloaddition with defective ternary metal sulfides.

Enhanced Photocatalytic Properties of All-Organic IDT-COOH/O-CN S-Scheme Heterojunctions Through π-π Interaction and Internal Electric Field

Herein, we present a distinct methodology for the in situ electrostatic assembly method for synthesizing a conjugated (IDT-COOH)/oxygen-doped g-C3N4 (O-CN) S-scheme heterojunction. The electron delocalization effect due to π-π interactions between O-CN and self-assembled IDT-COOH favors interfacial charge separation. The self-assembled IDT-COOH/O-CN exhibits a broadened visible absorption to generate more charge carriers. The internal electric field between the IDT-COOH and the O-CN interface provides a directional charge-transfer channel to increase the utilization of photoinduced charge carriers. Moreover, the active species (•O2-, h+, and 1O2) produced by IDT-COOH/O-CN under visible light play important roles in photocatalytic disinfection. The optimum 40% IDT-COOH/O-CN can kill 7-log of methicillin-resistant Staphylococcus aureus (MRSA) cells in 2 h and remove 88% tetracycline (TC) in 5 h, while O-CN only inactivates 1-log of MRSA cells and degrades 40% TC. This work contributes to a promising method to fabricate all-organic g-C3N4-based S-scheme heterojunction photocatalysts with a wide range of optical responses and enhanced exciton dissociation.

Surface and interface engineering of BiOCl nanomaterials and their photocatalytic applications

BiOCl materials have received much attention because of their unique optical and electrical properties. Still, their unsatisfactory catalytic performance has been troubling researchers, limiting the application of BiOCl-based photocatalysts. Therefore, many researchers have studied the adjustment of BiOCl-based materials to enhance photocatalytic efficiency. This review focuses on surface and interface engineering strategies for boosting the photocatalytic performance of BiOCl-based nanomaterials, including forming oxygen vacancy defects, constructing metal/BiOCl, and the fabrication of semiconductor/BiOCl nanocomposites. The photocatalytic applications of the above composites are also concluded in photodegradation of aqueous pollutants, photocatalytic NO removal, photo-induced H2 production, and CO2 reduction. Special emphasis has been given to the modification methods of BiOCl and photocatalytic mechanisms to provide a more detailed understanding for researchers in the fields of energy conversion and materials sciences.

Efficient Charge Separation and Transport in Fullerene-CuPcOC8 Donor-Acceptor Nanorod Enhancing Photocatalytic Hydrogen Generation

Photocatalytic hydrogen generation via water decomposition is a promising avenue in the pursuit of large-scale, cost-effective renewable hydrogen energy generation. However, the design of an efficient photocatalyst plays a crucial role in achieving high yields in hydrogen generation. Herein, we have engineered a fullerene-2,3,9,10,16,17,23,24-octa(octyloxy)copper phthalocyanine (C60-CuPcOC8) photocatalyst, achieving both efficient hydrogen generation and high stability. The significant donor-acceptor (D-A) interactions facilitate the efficient electron transfer from CuPcOC8 to C60. The rate of photocatalytic hydrogen generation for C60-CuPcOC8 is 8.32 mmol·g-1·h-1, which is two orders of magnitude higher than the individual C60 and CuPcOC8. The remarkable increase in hydrogen generation activity can be attributed to the development of a robust internal electric field within the C60-CuPcOC8 assembly. It is 16.68 times higher than that of the pure CuPcOC8. The strong internal electric field facilitates the rapid separation within 0.6 ps, enabling photogenerated charge transfer efficiently. Notably, the hydrogen generation efficiency of C60-CuPcOC8 remains above 95%, even after 10 h, showing its exceptional photocatalytic stability. This study provides critical insight into advancing the field of photocatalysis.

Boosting hydrogen production of a MOF-based multicomponent photocatalyst with clean interface via facile one-pot electrosynthesis

Hydrogen production from photocatalysis via the usage of multicomponent photocatalysts represents a promising pathway for carbon peaking and carbon neutrality, owing to their structural advantages in dealing with the three crucial processes in photocatalysis, namely, light harvesting, charge transfer, and surface redox reactions. We demonstrate the fabrication of a MOF-based multicomponent photocatalyst, denoted as semiconductor/MOF/cocatalyst, by a one-pot electrochemical synthetic route. The as-fabricated multicomponent photocatalyst has a clean interface among the components, leading to close connections that contribute to high-quality heterojunction and facilitate photogenerated charge transfer and separation, thereby the efficient hydrogen evolution. The hydrogen production rate of the resultant ZrO2 /Zr-MOF/Pt is 1327 μmol ⋅ g-1  ⋅ h-1 , which is much higher than that of ZrO2 /Zr-MOF (15 μmol ⋅ g-1  ⋅ h-1 ) and pure Zr-MOF (10.1 μmol ⋅ g-1  ⋅ h-1 ), as well as the photodeposited-Pt products ZrO2 /Zr-MOF/PtPD (287 μmol ⋅ g-1  ⋅ h-1 ) and Zr-MOF/PtPD (192 μmol ⋅ g-1  ⋅ h-1 ) obtained by the step-wise synthetic approach. The work gives a good inspiration for the rational design and construction of MOF-based multicomponent photocatalysts through the one-pot electrosynthesis.

Hollow Plasmonic P-Metal-N S-Scheme Heterojunction Photoreactor with Spatially Separated Dual Cocatalysts toward Artificial Photosynthesis

Semiconductor-based step-scheme (S-scheme) heterojunctions possess many merits toward mimicking natural photosynthesis. However, their applications for solar-to-chemical energy conversion are hindered by inefficient charge utilization and unsatisfactory surface reactivity. Herein, two synergistic protocols are demonstrated to overcome these limitations based on the construction of a hollow plasmonic p-metal-n S-scheme heterojunction photoreactor with spatially separated dual noble-metal-free cocatalysts. On one side, plasmonic Au, inserted into the heterointerfaces of CuS@ZnIn2 S4 core-shell nanoboxes, not only accelerates the transfer and recombination of useless charges, enabling a more thorough separation of useful ones for CO2 reduction and H2 O oxidation but also generates hot electrons and holes, respectively injects them into ZnIn2 S4 and CuS, further increasing the number of active carriers participating in redox reactions. On the other side, Fe(OH)x and Ti3 C2 cocatalysts, separately located on the CuS and ZnIn2 S4 surface, enrich the redox sites, adjust the reduction potential and pathway for selective CO2 -to-CH4 transformation, and balance the transfer and consumption of photocarriers. As expected, significantly enhanced activity and selectivity in CH4 production are achieved by the smart design along with nearly stoichiometric ratios of reduction and oxidation products. This study paves the way for optimizing artificial photosynthetic systems via rational interfacial channel introduction and surface cocatalyst modification.

Embedding Nano-Piezoelectrics into Heterointerfaces of S-Scheme Heterojunctions for Boosting Photocatalysis and Piezophotocatalysis

Step-scheme (S-scheme) heterojunctions have exhibited great potential in photocatalysis due to their extraordinary light harvesting and high redox capacities. However, inadequate S-scheme recombination of useless carriers in weak redox abilities increases the probability of their recombination with useful ones in strong redox capabilities. Herein, a versatile protocol is demonstrated to overcome this impediment based on the insertion of nano-piezoelectrics into the heterointerfaces of S-scheme heterojunctions. Under light excitation, the piezoelectric inserter promotes interfacial charge transfer and produces additional photocarriers to recombine with useless electrons and holes, ensuring a more thorough separation of powerful ones for CO2 reduction and H2 O oxidation. When introducing extra ultrasonic vibration, a piezoelectric polarization field is established, which allows efficient separation of charges generated by the embedded piezoelectrics and expedites their recombination with weak carriers, further increasing the number of strong ones participating in the redox reactions. Encouraged by the greatly improved charge utilization, significantly enhanced photocatalytic and piezophotocatalytic activities in CH4 , CO, and O2 production are achieved by the designed stacked catalyst. This work highlights the importance in strengthening the necessary charge recombination in S-scheme heterojunctions and presents an efficient and novel strategy to synergize photocatalysis and piezocatalysis for renewable fuels and value-added chemicals production.

Nanozyme-assisted ratiometric photoelectrochemical aptasensor over Cu2O nanocubes mediated photocurrent-polarity-switching based on S-scheme FeCdS@FeIn2S4 heterostructure

The controllable modulation of the response mode is highly attractive for the construction of photoelectrochemical (PEC) sensors with improved sensitivity and anti-interference ability in complex real samples matrix. Here, we present a charming proof-of-concept ratiometric PEC aptasensor of enrofloxacin (ENR) analysis via the controllable signal transduction. Different with the traditional sensing mechanism, this ratiometric PEC aptasensor integrates the anodic PEC signal induced by PtCuCo nanozyme-catalyzed precipitation reaction and the polarity-switching cathodic PEC response mediated by Cu2O nanocubes on S-scheme FeCdS@FeIn2S4 heterostructure. Taking advantages of the photocurrent-polarity-switching signal response model and the superior performance of the photoactive substrate material, the proposed ratiometric PEC aptasensor displays a good detection linear range for ENR analysis from 0.01 pg mL-1 to 10 ng mL-1, with a detection limit of 3.3 fg mL-1. This study provides a general platform for detecting interested trace analytes in real samples and expands the diversity of sensing strategy design.

Rational design of CdS/BiOCl S-scheme heterojunction for effective boosting piezocatalytic H2 evolution and pollutants degradation performances

Piezocatalysis as an emerging technology is broadly applied in hydrogen evolution and organic pollutants degradation aspects. However, the dissatisfactory piezocatalytic activity is a severe bottleneck for its practical applications. In this work, CdS/BiOCl S-scheme heterojunction piezocatalysts were constructed and explored the performances of piezocatalytic hydrogen (H₂) evolution and organic pollutants degradation (methylene orange, rhodamine B and tetracycline hydrochloride) under strain by ultrasonic vibration. Interestingly, CdS/BiOCl presents a volcano-type relationship between catalytic activity and CdS contents, namely firstly increases and then decreases with the increase of CdS content. Optimal 20 % CdS/BiOCl endows superior piezocatalytic H₂ generation rate of 1048.2 μmol g^-1h^-1 in methanol solution, which is 2.3 and 3.4 times higher than that of pure BiOCl and CdS, respectively. This value is also much higher than the recently reported Bi-based and most of other typical piezocatalysts. Meanwhile, 5 % CdS/BiOCl delivers the highest reaction kinetics rate constant and degradation rate toward various pollutants compared with other catalysts, which also exceeds that of the previously numerous results. Improved catalytic capacity of CdS/BiOCl is mainly ascribed to the construction of S-scheme heterojunction for enhancing the redox capacity as well as inducing more effective charge carriers separation and transfer. Moreover, S-scheme charge transfer mechanism is demonstrated via electron paramagnetic resonance and Quasi-In-situ X-ray photoelectron spectroscopy measurements. Eventually, a novel piezocatalytic mechanism of CdS/BiOCl S-scheme heterojunction has been proposed. This research develops a novel pathway for designing highly efficient piezocatalysts and provides a deeper understanding in construction of Bi-based S-scheme heterojunction catalysts for energy conservation and wastewater disposal applications.

Constructing Type-II and S-Scheme Heterojunctions of Cu2O@Cu4(SO4)(OH)6·H2O Polyhedra by In Situ Etching Cu2O with Different Exposed Facets for Enhanced Photocatalytic Sterilization and Degradation Performance

The construction of type-II or S-scheme heterojunctions can effectively accelerate the directional migration of charge carriers and inhibit the recombination of electron-hole pairs to improve the catalytic performance of the composite catalyst; therefore, the construction and formation mechanism of a heterojunction are worth further investigation. Herein, Cu₂O@Cu₄(SO₄)(OH)₆·H₂O core-shell polyhedral heterojunctions were fabricated via in situ etching Cu₂O with octahedral, cuboctahedral, and cubic shapes by sodium thiosulfate (Na₂S₂O₃). Cu₂O@Cu₄(SO₄)(OH)₆·H₂O polyhedral heterojunctions demonstrated obviously enhanced sterilization and degradation performance than the corresponding single Cu₂O polyhedra and Cu₄(SO₄)(OH)₆·H₂O. When Cu₂O with a different morphology contacts with Cu₄(SO₄)(OH)₆·H₂O, a built-in electric field is established at the interface due to the difference in Fermi level (E_f); meanwhile, the direction of band bending and the band alignment are determined. These lead to the different migration pathways of electrons and holes, and thereby, a type-II or S-scheme heterojunction is constructed. The results showed that octahedral o-Cu₂O@Cu₄(SO₄)(OH)₆·H₂O is an S-scheme heterojunction; however, cuboctahedral co-Cu₂O@Cu₄(SO₄)(OH)₆·H₂O and cubic c-Cu₂O@Cu₄(SO₄)(OH)₆·H₂O are type-II heterojunctions. By means of X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), diffuse reflectance spectra (DRS), and Mott-Schottky analyses, the band alignments, Fermi levels, and band offsets (ΔE_CB, ΔE_VB) of Cu₂O@Cu₄(SO₄)(OH)₆·H₂O polyhedral heterojunctions were estimated; the results indicated that the catalytic ability of the composite catalyst is determined by the type of heterojunction and the sizes of band offsets. Cubic c-Cu₂O@Cu₄(SO₄)(OH)₆·H₂O has the strongest driving force (namely, biggest band offsets) to accelerate charge migration and effectively separate charge carriers, so it exhibits the strongest catalytic bactericidal and degrading abilities.

Integration of CuS/ZnIn2S4 flower-like heterojunctions and (MnCo)Fe2O4 nanozyme for signal amplification and their application to ultrasensitive PEC aptasensing of cancer biomarker

Vascular endothelial growth factor 165 (VEGF₁₆₅) is a crucial regulator of angiogenesis and works as a major protein biomarker of cancer metastasis. Therefore, its quantitative detection is pivotal in clinic. In this work, CuS/ZnIn₂S₄ flower-like heterojunctions had strong and stable photocurrents, which behaved as photoactive material to construct a photoelectrochemical (PEC) aptasensor for detecting VEGF₁₆₅, combined by home-prepared (MnCo)Fe₂O₄ nanozyme-mediated signal amplification. The interfacial photo-induced electron transfer mechanism was chiefly discussed by UV-vis diffuse reflectance spectroscopy in details. Specifically, the (MnCo)Fe₂O₄ modified VEGF₁₆₅ aptamer was released from the PEC aptasensing platform for its highly specific affinity to target VEGF₁₆₅, which terminated the color precipitation reaction, ultimately recovering the PEC signals. The developed sensor displayed a wider linear range from 1 × 10^-2 to 1 × 10⁴ pg mL^-1 with a smaller limit of detection (LOD) of 0.1 fg mL^-1. This study provides some valuable insights for building other ultrasensitive aptasensors for clinical assays of cancer biomarkers in practice.

Build-in electric field in CuWO4/covalent organic frameworks S-scheme photocatalysts steer boosting charge transfer for photocatalytic CO2 reduction

Covalent organic frameworks (COFs) are crystalline porous materials with enormous potential for realizing solar-driven CO₂-to-fuel conversion, yet the sluggish transfer/separation of photoinduced electrons and holes remains a compelling challenge. Herein, a step (S)-scheme heterojunction photocatalyst (CuWO₄-COF) was rationally fabricated by a thermal annealing method for boosting CO₂ conversion to CO. The optimal CuWO₄/COF composite sample, integrating 10 wt% CuWO₄ with an olefin (C═C) linked COF (TTCOF), achieved a remarkable gas-solid phase CO yield as high as 7.17 ± 0.35 μmol g^-1h^-1 under visible light irradiation, which was significantly higher than the pure COF (1.6 ± 0.29 μmol g^-1h^-1). The enhanced CO₂ conversion rate could be attributable to the interface engineering effect and the formation of internal electric field (IEF) directing from TTCOF to CuWO₄ according to the theoretical calculation and experimental results, which also proves the electrons transfer from TTCOF to CuWO₄ upon hybridization. In addition, driven by the IEF, the photoinduced electrons can be steered from CuWO₄ to TTCOF under visible light irradiation as well-elucidated by in-situ irradiated X-ray photoelectron spectroscopy, verifying the S-scheme charge transfer pathway over CuWO₄/COF composite heterojunctions, which greatly foster the photoreduction activity of CO₂. The preparation technique of the S-scheme heterojunction photocatalyst in this study provides a paradigmatic protocol for photocatalytic solar fuel generation.

Embedding Plasmonic Metal into Heterointerface of MOFs-Encapsulated Semiconductor Hollow Architecture for Boosting CO2 Photoreduction

Coupling hollow semiconductor with metal-organic frameworks (MOFs) holds great promise for constructing high-efficient CO₂ photoreduction systems. However, energy band mismatch between them makes it difficult to exert their advantages to maximize the overall photocatalytic efficiency, since that the blockage of desirable interfacial charge transfer gives rise to the enrichment of photoelectrons and CO₂ molecules on the different locations. Herein, an interfacial engineering is presented to overcome this impediment, based on the insertion of plasmonic metal into the heterointerfaces between them, forming a stacked semiconductor/metal@MOF photocatalyst. Experimental observations and theoretical simulations validate the critical roles of embedded Au in maneuvering the charge separation/transfer and surface reaction: (i) bridges the photoelectron transfer from hollow CdS (H-CdS) to ZIF-8; (ii) produces hot electrons and shifts them to ZIF-8; (iii) induces the formation of ZIF-8 defects in promoting the CO₂ adsorption/activation and transformation to CO with low energy barriers. Consequently, the as-prepared H-CdS/Au@ZIF-8 with optimal ZIF-8 thickness exhibits distinctly boosted activity and superb selectivity in CO production as compared with H-CdS@ZIF-8 and other counterparts. This work provides protocols to take full advantages of components involved for enhanced solar-to-chemical energy conversion efficiency of hybrid artificial photosynthetic systems through rationally harnessing the charge transfer between them.

Interfacial intimacy and internal electric field modulated S-scheme Sv-ZnS/ZnIn2S4 photocatalyst for efficient H2 evolution and CO2 reduction

The construction of S-scheme heterojunctions is an effective approach to realize artificial photocatalytic processes. For the higher solar energy conversion efficiency, current research focuses on improving the interfacial intimacy and precisely modulating the strength of the internal electric field (IEF). To address this issue, we propose a novel MOF-based synthesis and derivation strategy. The heterojunction obtained by this strategy tends to form an intimate interface and a tunable IEF, which facilitates the transfer and separation of photogenerated carriers. Herein, a ZnS/ZnIn₂S₄ (ZIS) S-Scheme heterojunction containing sulfur vacancies (Sv) was successfully synthesized, and its good photocatalytic hydrogen evolution reaction (HER) and CO₂ reduction reaction (CO₂RR) activity confirmed the feasibility of this strategy. The prepared Sv-ZnS/ZIS exhibits an apparent quantum yield of 19.8 ± 1.0 % at 420 nm and a hydrogen evolution rate of 2912.3 ± 185.9 μmol g^-1h^-1, which is 9.0 and 33.6 times higher than pure ZIS and Sv-ZnS, respectively. Furthermore, the yield of photoreduction CO₂ to CO reaches 2075.7 ± 63.0 μmol g^-1h^-1 with a CO selectivity of 93.0 ± 0.8 %. This work provides new sights for the rational design and construction of S-scheme photocatalysts with sulfur vacancies for efficient photocatalysis.

Construction of S-Scheme heterojunction Ni11(HPO3)8(OH)6/CdS photocatalysts with open framework surface for enhanced H2 evolution activity

The emerging S-scheme heterojunction shows a particular superiority in enhancing the efficiency of charge separation in photocatalyst. Herein, a Ni₁₁(HPO₃)₈(OH)₆/CdS heterojunctions (NiPO/CdS) are constructed for the first time by loading open framework structure NiPO on the surface of CdS nanoparticles (CdS NPs). The built-in electric field generated at the interface promotes the directional migration of photogenerated electrons from NiPO to CdS. This S-scheme pathway achieves a strong redox capacity and efficient carrier separation. More importantly, the unique triangular and hexagonal channels of NiPO facilitate the exposure of CdS active sites for proton adsorption, H₂ production and escape. The hydrogen evolution rate of NiPO/CdS is 39 mmol g^-1 h^-1 under visible light irradiation, which is 6.5 times higher than that of pure CdS. The NiPO/CdS heterojunction also exhibits remarkable long-term stability. This study provides a new strategy for the ingenious design of S-scheme photocatalysts with excellent photocatalytic performance.

Spatially Separated Redox Cocatalysts on Ferroelectric Nanoplates for Improved Piezophotocatalytic CO2 Reduction and H2O Oxidation

Utilizing solar and mechanical vibration energy for catalytic CO₂ reduction and H₂O oxidation is emerging as a promising way to simultaneously generate renewable energy and mitigate climate change, making it possible to integrate two energy resources into a reaction system for artificial piezophotosynthesis. However, the practical applications are hindered by undesirable charge recombination and sluggish surface reaction in the photocatalytic and piezocatalytic processes. This study proposes a dual cocatalyst strategy to overcome these obstacles and improve the piezophotocatalytic performance of ferroelectrics in overall redox reactions. With the photodeposition of AuCu reduction and MnO_x oxidation cocatalysts on oppositely poled facets of PbTiO₃ nanoplates, band bending occurs along with the formation of built-in electric fields on the semiconductor-cocatalyst interfaces, which, together with an intrinsic ferroelectric field, piezoelectric polarization field, and band tilting in the bulk of PbTiO₃, provide strong driving forces for the directional drift of piezo- and photogenerated electrons and holes toward AuCu and MnO_x, respectively. Besides, AuCu and MnO_x enrich the active sites for surface reactions, significantly reducing the rate-determining barrier for CO₂-to-CO and H₂O-to-O₂ transformation, respectively. Benefiting from these features, AuCu/PbTiO₃/MnO_x delivers remarkably improved charge separation efficiencies and significantly enhanced piezophotocatalytic activities in CO and O₂ generation. This strategy opens a door for the better coupling of photocatalysis and piezocatalysis to promote the conversion of CO₂ with H₂O.

Enhanced photocatalytic reduction of CO2 on BiOBr under synergistic effect of Zn doping and induced oxygen vacancy generation

In this work, different BiOBr powders (without and with Zn doping) were prepared. Their specific properties and photocatalytic performance were studied. Zn doped BiOBr showed higher carrier transportation ability, beneficial to high performance photocatalysis. Further analysis and theoretical calculations unveiled that Zn doping resulted in more dispersive energy band structure with improved oxygen vacancy (O_V) generation due to lattice distortion. O_V acted as trap centers, playing dominant role in carrier transportation enhancement, which also synergized with more dispersive energy band due to Zn doping, improving carrier separation and transfer. Besides, Zn doping would further strengthen trapping effect under O_V existence, stimulating synergistic enhancement to spatial charge separation and transfer with O_V. With synergy of Zn doping and O_V, Zn doped samples produced 1.75 times higher CH₄ generation during gas-solid photocatalytic reduction of CO₂ under visible light, testifying successful conducting of Zn doping improved photocatalytic capacity on BiOBr.

Architecture and Kinetic Studies of Photocatalytic H2O2 Generation and H2 Evolution through Regulation of Spatial Charge Transfer via Z-Scheme Path over a (001) Facet Engineered TiO2@MXene/B-g-C3N4 Ternary Hybrid

Spatial charge separation and migration are the critical shortcomings dominating the core energy conversion corridors of photocatalytic systems. Here, a biomimetic multi-interfacial architecture providing strong coupled interaction and rapid charge transmission for photostable and competent photocatalytic H2O2 production and H2 evolution is proposed. The triple-hybrid all-solid-state Z-scheme system was formed with the (001) facet exposed TiO2 nanosheets derived from MXene layers and B-g-C3N4 nanosheets (M/(001)TiO2@BCN) through an electrostatic self-assembly strategy with intimate electronic interaction due to Ti orbital modulation and proper stacking among the hybrids. The metallic and highly conductive MXene layers act as solid state electron mediators in the Z-scheme heterojunction that promote electron-hole separation and migration efficiency. Specifically, the MTBCN-12.5 composite provides optimum yield of H2O2 up to 1480.1 μmol h-1 g-1 and a H2 evolution rate of 408.4 μmol h-1 (with ACE 6.7%), which are 4 and 20 fold greater than the pristine BCN, respectively. The enhanced photocatalytic performance is systematically identified by the increased surface area, higher cathodic and anodic current densities of -1.01 and 2.27 mA cm-2, delayed charge recombination as supported by PL and EIS measurement, and excellent photostability. The Z-scheme charge transfer mechanism is validated by time-resolved photoluminescence (TRPL) analysis, cyclic voltametric analysis, and the radical trapping experiment as detected by PL analysis. This research marks a substantial advancement and establishes the foundation for future design ideas in accelerating charge transfer.

Plasmonic Metal Mediated Charge Transfer in Stacked Core-Shell Semiconductor Heterojunction for Significantly Enhanced CO2 Photoreduction

Construction of core-shell semiconductor heterojunctions and plasmonic metal/semiconductor heterostructures represents two promising routes to improved light harvesting and promoted charge separation, but their photocatalytic activities are respectively limited by sluggish consumption of charge carriers confined in the cores, and contradictory migration directions of plasmon-induced hot electrons and semiconductor-generated electrons. Herein, a semiconductor/metal/semiconductor stacked core-shell design is demonstrated to overcome these limitations and significantly boost the photoactivity in CO₂  reduction. In this smart design, sandwiched Au serves as a "stone", which "kills two birds" by inducing localized surface plasmon resonance for hot electron generation and mediating unidirectional transmission of conduction band electrons and hot electrons from TiO₂  core to MoS₂  shell. Meanwhile, upward band bending of TiO₂  drives core-to-shell migration of holes through TiO₂ -MoS₂  interface. The co-existence of TiO₂  → Au → MoS₂  electron flow and TiO₂  → MoS₂  hole flow contributes to spatial charge separation on different locations of MoS₂  outer layer for overall redox reactions. Additionally, reduction potential of photoelectrons participating in the CO₂  reduction is elaborately adjusted by tuning the thickness of MoS₂  shell, and thus the product selectivity is delicately regulated. This work provides fresh hints for rationally controlling the charge transfer pathways toward high-efficiency CO₂  photoreduction.

Facet Engineering in Constructing Lewis Acid-Base Pairs for CO2 Cycloaddition to High Value-Added Carbonates

Cycloaddition of epoxides with CO₂ to synthesis cyclic carbonates is an atom-economic pathway for CO₂ utilization with promising industry application value, while its efficiency was greatly inhibited for the lack of highly active catalytic sites. Herein, by taking BiOX (X = Cl, Br) with layered structure for example, we proposed a facet engineering strategy to construct Lewis acid-base pairs for CO₂ cycloaddition, where the typical BiOBr with (010) facets expose surface Lewis acid Bi sites and Lewis base Br sites simultaneously. By the combination of in-situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and theoretical calculations, the oxygen atom of the epoxide is interacted with the Lewis acid Bi site to activate the ternary ring, then facilitates the attack of the carbon atom by the Lewis base Br site for the ring-opening of the epoxide, which is the rate-determining step in the cycloaddition reaction. As a result, the BiOBr-(010) with rich surface Lewis acid-base pairs showed a high conversion of 85% with 100% atomic economy in the synthesis of cyclic-carbonates without any cocatalyst. This study provides a model structure for CO₂ cycloaddition to high value-added long chain chemicals.

In-situ constructed 2D/2D ZnIn2S4/Bi4Ti3O12 S-scheme heterojunction for degradation of tetracycline: Performance and mechanism insights

Semiconductor materials dominated photocatalytic technology is one of the most efficient approaches to degrade organic pollutants. However, the limited light absorption range and rapid recombination of photogenerated carriers greatly restrict the application of photocatalysts. Rational design of photocatalysts to achieve high catalytic activity and stability is of great importance. Herein, ZnIn₂S₄/Bi₄Ti₃O₁₂ S-scheme heterojunction is synthesized by growing the ZnIn₂S₄ nanosheets on the sheet-like Bi₄Ti₃O₁₂ surface via a low-temperature solvothermal method. The TC removal efficiency of optimized heterojunction reaches 82.1% within 60 min under visible light, and the rate constant is nearly 6.8 times than that of pristine ZnIn₂S₄. The favorable photocatalytic performance of heterojunction is attributed to the tight contact interface and efficient separation of photogenerated carriers. Besides, the difference in work function between ZnIn₂S₄ and Bi₄Ti₃O₁₂ leads to band bending and the establishment of built-in electric field on the contact interface of heterojunction, which facilitates the migration and separation of photogenerated carriers. Furthermore, the cycling test demonstrates the attractive stability of heterojunction. The possible TC photodegradation pathways and toxicity assessment of the intermediates are also analyzed. In conclusion, this work provides an effective strategy to prepare S-scheme heterojunction photocatalysts with favorable photocatalytic activity, which can enhance wastewater purification efficiency.

Rational Design of Novel COF/MOF S-Scheme Heterojunction Photocatalyst for Boosting CO2 Reduction at Gas-Solid Interface

Solar-driven photoreduction of CO₂ into valuable fuels offers a sustainable technology to relieve the energy crisis as well as the greenhouse effect. Yet the exploration of highly efficient, selective, stable, and environmental benign photocatalysts for CO₂ reduction remains a major issue and challenge. The interfacial engineering of heterojunction photocatalysts could be a valid approach to boost the efficiency of the catalytic process. Herein, we propose a novel covalent organic framework/metal organic framework (COF/MOF) heterojunction photocatalyst, using olefin (C═C) linked covalent organic framework (TTCOF) and NH₂-UiO-66 (Zr) (NUZ) as representative building blocks, for enhanced CO₂ reduction to CO. The optimized TTCOF/NUZ exhibited a superior CO yield (6.56 μmol g^-1 h^-1) in gas-solid system when irradiated by visible light and only with H₂O (g) as weak reductant, and it was 4.4 and 5 times higher than pristine TTCOF and NUZ, respectively. The photogenerated electrons transfer route was proposed to follow the typical step-scheme (S-scheme), which was affirmed by XPS, in situ XPS and EPR characterizations. The boosting CO₂ photoreduction activity could be credited to the special charge carrier separation in S-scheme heterojunction, which can accelerate photogenerated electrons transportation and improve the redox ability at the interface. This work paves the way for the design and preparation of novel COF/MOF S-scheme heterostructure photocatalysts for CO₂ reduction.

Design Strategies for Large Current Density Hydrogen Evolution Reaction

Hydrogen energy is considered one of the cleanest and most promising alternatives to fossil fuel because the only combustion product is water. The development of water splitting electrocatalysts with Earth abundance, cost-efficiency, and high performance for large current density industrial applications is vital for H2 production. However, most of the reported catalysts are usually tested within relatively small current densities (< 100 mA cm-2), which is far from satisfactory for industrial applications. In this minireview, we summarize the latest progress of effective non-noble electrocatalysts for large current density hydrogen evolution reaction (HER), whose performance is comparable to that of noble metal-based catalysts. Then the design strategy of intrinsic activities and architecture design are discussed, including self-supporting electrodes to avoid the detachment of active materials, the superaerophobicity and superhydrophilicity to release H2 bubble in time, and the mechanical properties to resist destructive stress. Finally, some views on the further development of high current density HER electrocatalysts are proposed, such as scale up of the synthesis process, in situ characterization to reveal the micro mechanism, and the implementation of catalysts into practical electrolyzers for the commercial application of as-developed catalysts. This review aimed to guide HER catalyst design and make large-scale hydrogen production one step further.

Nanosized Zn-In spinel-type sulfides loaded on facet-oriented CeO2 nanorods heterostructures as Z-scheme photocatalysts for efficient elemental mercury removal

Developing of effective photocatalysts is of great significance for realizing photocatalytic environment purification. Herein, an interfacial bent bands and internal electric field modulated CeO₂/ZnIn₂S₄ Z-scheme heterojunction for photocatalytic Hg⁰ oxidation. It is found that the charge transfer mechanism of Z-scheme was driven by the interfacial bent bands and internal electric field, which was confirmed by electrochemical measurements, electron spin paramagnetic resonance spectroscopy and density functional theory calculations. Moreover, the (110) dominant CeO₂ nanorods partially converted Ce⁴⁺ to Ce³⁺ and formed oxygen vacancies, and as an electron mediator in Z-scheme systems to further facilitate charge transfer process and molecular oxygen activation. Under the strong synergistic effect between the large specific surface area, Z-scheme heterojunction and oxygen vacancies, the optimized photocatalyst exhibits 86.7% of photocatalytic removal efficiency. This work provides Z-scheme heterojunction photocatalyst design perspective for photocatalytic air purification.

Emerging Stacked Photocatalyst Design Enables Spatially Separated Ni(OH)2 Redox Cocatalysts for Overall CO2 Reduction and H2 O Oxidation

Construction of photocatalytic systems with spatially separated dual cocatalysts is considered as a promising route to modulate charge separation/transfer, promote surface redox reactivities, and prevent unwanted reverse reactions. However, past efforts on the loading of spatially separated double-cocatalysts are limited to hollow structured semiconductors with inner/outer surface and monocrystalline semiconductors with different exposed facets. To overcome this limitation, herein, enabled by a unique stacked photocatalyst design, a facile and versatile strategy for spatial separation of redox cocatalysts on various semiconductors without structural and morphological restriction is demonstrated. The smart design begins with the deposition of light-harvesting semiconductors on reduced graphene oxide (rGO) nanosheets, followed with the coverage of Ni(OH)₂ outer layer. The ternary photocatalysts exhibit superior activities and stabilities of H₂ O oxidation and selective CO₂ -to-CO reduction, remarkably surpassing other counterparts. The origin of the enhanced performance is attributed to the synergistic interplay of rGO@Ni(OH)₂ reduction cocatalysts surrounding the semiconductors and Ni(OH)₂ oxidation cocatalysts directly supported by the semiconductors, which mitigates the charge recombination, supplies highly active and selective sites for overall reactions, and preserves the semiconductors from photocorrosion. This work presents a new approach to regulating the position of dual cocatalysts and ameliorating the net efficiency of photoredox catalysis.

Enhanced Visible Photocatalytic Hydrogen Evolution of KN-Based Semiconducting Ferroelectrics via Band-Gap Engineering and High-Field Poling

In various ferroelectric-based photovoltaic materials after low-band-gap engineering, the process by which high-field polarization induces the depolarizing electric field (E_dp) to accelerate the electron-hole pair separation in the visible light photocatalytic process is still a great challenge. Herein, a series of semiconducting KN-based ferroelectric catalytic materials with narrow multi-band gaps and high-field polarization capabilities are obtained through the Ba, Ni, and Bi co-doping strategy. Stable E_dp caused by high-field poling enhanced the visible photocatalytic hydrogen evolution in a 0.99KN-0.01BNB sample with a narrow band gap and optimal ferroelectricity, which can be 5.4 times higher than that of the unpoled sample. The enhanced photocatalytic hydrogen evolution rate can be attributed to the synergistic effect of the significant reduction of the band gap and the high-field-polarization-induced E_dp. The change in the band position in the poled sample further reveals that high-field poling may accelerate the migration of carriers through band bending. Insights into the mechanism by which catalytic activity is enhanced through high-field-polarization-induced E_dp may pave the way for further development of ferroelectric-based catalytic materials in the photocatalytic field.

Limbic Inducted and Delocalized Effects of Diazole in Carbon Nitride Skeleton for Propelling Photocatalytic Hydrogen Evolution

Skeleton modification on carbon nitride (g-C₃N₄) via organic molecules is a recognized effective strategy to improve photocatalytic performance because it can powerfully improve charge separation in the skeleton plane. Herein, a diazole with a unique conjugated structure is bonded on edge of the g-C₃N₄ skeleton through a moderate polymerization of urea with 4-aminoantipyrine (4AAP). Meanwhile, the Pt nanoparticles selectively deposit on edge of the g-C₃N₄-4AAP₁₅ nanosheet. It reveals that the robust limbic inducted and delocalized effects of diazole not only facilitate photogenerated electrons aggregation toward skeleton edge to promote in-plane carrier separation but also effectively stabilize and delocalize photogenerated electrons to improve carrier lifetime for propelling the photocatalytic hydrogen evolution (PHE) reaction. Specifically, the PHE rate over optimal g-C₃N₄-4AAP₁₅ (284.2 μmol h^-1) is 10 times that of pure g-C₃N₄ (27.6 μmol h^-1) and the apparent quantum efficiency (AQE) at 420 nm reaches up to 24.2%. Through insights into the functionalized effect of small nitrogenous heterocycles introduced into the skeleton edge of g-C₃N₄, this work opens a new design thought for exploiting high-efficiency g-C₃N₄-based photocatalysts for photocatalytic application.

Two-dimensional graphitic carbon nitride/N-doped carbon with a direct Z-scheme heterojunction for photocatalytic generation of hydrogen

Photocatalysts with a direct Z-scheme heterojunction are promising by virtue of the effectively enhanced separation of charge carriers, high retention of redox ability and the absence of backward photocatalytic reactions. Their activity depends on band alignment and interfacial configurations between two semiconductors for charge carrier kinetics and the effective active sites for photochemical reactions. Herein, a two-dimensional (2D) graphitic carbon nitride/N-doped carbon (C₃N₄/NC) photocatalyst is synthesized by a gas template (NH₄Cl)-assisted thermal condensation method. C₃N₄/NC has the synthetic merits of a direct Z-scheme heterojunction, 2D-2D interfacial contact, and enhanced specific surface area to improve charge separation kinetics and provide abundant active sites for photochemical reaction. It exhibits an over 46-fold increase of the photocatalytic hydrogen production rate compared to bulk C₃N₄ under visible light illumination. This work demonstrates the great potential of 2D Z-scheme heterojunctions for photocatalysis and will inspire more related work in the future.