Synergistic Effect of Defect Passivation and Crystallization Control Enabled by Bifunctional Additives for Carbon-Based Mesoscopic Perovskite Solar Cells

Room-Temperature Processed Annealing-Free Printable Carbon-Based Mesoscopic Perovskite Solar Cells with 17.34% Efficiency

Carbon-based printable mesoscopic perovskite solar cells (MPSCs) have promising commercial development due to the use of easily scalable printing processes and low-cost carbon material electrodes. Simplifying the preparation process of MPSCs will undoubtedly contribute to their practical application. Here, we demonstrate that efficient and stable MPSCs can be prepared at room temperature without annealing by using low boiling point 2-methoxyethanol (2-ME) and strongly coordinated N-methyl-2-pyrrolidone (NMP) as a novel mixed solvent under the synergistic effect of ammonium chloride (NH4Cl). The results show that the 2-ME/NMP mixed solvent can generate an optimized coordination environment so that uniform nucleation and crystallization of perovskites in mesopores can be achieved at room temperature without annealing by forming uniform small-sized colloids in the precursor solution. Moreover, our work for the first time introduces NH4Cl as a crystallization modulator during a room-temperature annealing-free process, effectively regulating the crystallization behavior of perovskite in mesopores and obtaining high-quality perovskites. Finally, MPSCs prepared synergistically by a room-temperature annealing-free process based on a low boiling point 2-ME/NMP mixed solvent and NH4Cl modulator achieved a champion power conversion efficiency of 17.34% while demonstrating excellent long-term air stability for over half a year. This work provides a new approach to simplifying the preparation process of MPSCs and preparing efficient and stable MPSCs through a room-temperature annealing-free process.

Achieved 18.9% Efficiency by Fine-Tuning Non-Fullerene Acceptor Content to Simultaneously Increase the Short-Circuit Current and Fill Factor of Organic Solar Cells

In this study, using PM6:L8-BO as the main system and non-fullerene acceptor IDIC as the third component, a series of ternary organic solar cells (TOSCs) are fabricated. The results reveal that IDIC plays a significant role in enhancing the performance of TOSCs by optimizing the morphology of blended films and forming interpenetrating nanostructure. The improved film morphology facilitates exciton dissociation and collection in TOSCs, which causes an increase in the short-circuit current density (JSC ) and fill factor (FF). Further, by optimizing the IDIC content, the power conversion efficiency (PCE) of TOSCs reaches 18.9%. Besides, the prepared TOSCs exhibit a JSC of 27.51 mA cm-2 and FF of 76.64%, which are much higher than those of PM6:L8-BO-based organic solar cells (OSCs). Furthermore, the addition of IDIC improves the long-term stability of the OSCs. Meanwhile, TOSCs with a large effective area of 1.00 cm2 have been prepared, which exhibit a PCE of 12.4%. These findings suggest that modifying the amount of the third component can be a useful strategy to construct hight-efficiency TOSCs with practical application potential.

Crystallization Kinetics Control Enabled by a Green Ionic Liquid Additive toward Efficient and Stable Carbon-Based Mesoscopic Perovskite Solar Cells

Carbon-based mesoscopic perovskite solar cells (MPSCs) are becoming one of the most competitive photovoltaic technologies owing to their lower manufacturing cost and excellent stability. In this work, methylammonium acetate (MAAc), an ionic liquid additive, is added into methylammonium lead triiodide (MAPbI₃) perovskite and is used to fabricate high-performance MPSCs. Systematic and detailed studies have shown that the MAAc interacts with PbI₂ preferentially to form a MAPbI_3-x(Ac)_x intermediate phase that can effectively control the crystallization kinetics of MAPbI₃ in the triple-mesoscopic layer. MAPbI₃ films with an appropriate amount of MAAc exhibit higher crystallinity, lower defect density, and dense pore filling, which effectively reduce carrier non-radiative recombination loss in MPSCs. As a result, a champion power conversion efficiency (PCE) of 13.54% is obtained based on the optimized MAAc-engineered MPSCs. The PCE is 24% higher than 10.90% of the control devices. Moreover, unencapsulated MAAc-engineered MPSCs retain 90% of their initial PCE after being stored in the dark for 50 days under ambient atmosphere, which demonstrates much better air stability than control devices. This work provides an effective strategy for developing efficient and stable carbon-based MPSCs with an eco-friendly ionic liquid additive.

Amino-Linked Conjugated Tetrazole Ring Passivation Strategy for Air-Processed Perovskite Cells with Predominant Stability and Efficiency

Perovskite solar cells (PSCs) develop rapidly with certified efficiency over 25.5 %, but there are remaining problems such as defects-induced recombination and degradation throughout the whole device. Functional organic small molecule passivation strategies are diverse and efficient, enhancing the efficiency and stability of PSCs. Here, 5-aminotetrazole (5ATZ) was introduced for the first time as an effective passivator, where -NH₂ and -NH as active sites interacted with the Pb and I related to vacancy defects in perovskites, anchoring defects and preventing further unavoidable ion migration and device degradation. Furthermore, the extensive π-electron delocalization around the tetrazole conjugated ring significantly promoted the charge transfer. Therefore, the 5ATZ-processed PSCs provided enhanced voltage and current, showed superior 19.75 % power conversion efficiency with excellent performance and improved stability, and demonstrated one of the best performances in all-air preparation to date. The simultaneous multi-effect passivation strategy of vacancy defects in perovskites will contribute to eliminate obstacles on the road to commercialization of PSCs.