Three-Dimensional Cross-Linked Nb2O5 Polymorphs Derived from Cellulose Substances: Insights into the Mechanisms of Lithium Storage

Defective state regulation of Ru-doped Nb2O5 boosts fast lithium storage

Breaking through the limitations of lithium-ion transmission is imperative for high-power rechargeable batteries. As a promising anode material for fast-charging lithium-ion batteries (LIBs), niobium pentoxide (Nb2O5) has garnered considerable research attention due to its exceptional rate performance, stable lithium storage performance and high safety attributes. Nevertheless, the limited intrinsic conductivity of Nb2O5, coupled with its structural degradation during the cycling process, imposes constraints on its viability as a commercially viable electrode material. Herein, a ruthenium (Ru) doping method is employed to regulate the oxygen defects and the interlayer spacing of the tetragonal Nb2O5 (M-Nb2O5), offering superior reaction kinetics, higher stability for lithium storage sites and more unobstructed lithium-ion transport channels. Ru-doped Nb2O5 (RNO) manifests excellent electrochemical properties, including remarkable rate capacity (166 mAh/g at 80C), reversible capacity (246.98 mAh/g at 0.5C), improved initial Coulombic efficiency (95.77 % compared to 81.44 % of the pure sample) and cycling stability (maintaining a capacity of 113.5 mAh/g at 10C for 2,000 cycles). The enhancement mechanism of Ru doping on the structural stability and ion transport kinetics in tetragonal Nb2O5 is comprehensively elucidated through diverse electrochemical analyses and in-situ techniques.

Enhancing the Lithium Storage Performance of the Nb2O5 Anode via Synergistic Engineering of Phase and Cu Doping

Nb2O5 has been viewed as a promising anode material for lithium-ion batteries by virtue of its appropriate redox potential and high theoretical capacity. However, it suffers from poor electric conductivity and low ion diffusivity. Herein, we demonstrate the controllable fabrication of Cu-doped Nb2O5 with orthorhombic (T-Nb2O5) and monoclinic (H-Nb2O5) phases through annealing the solvothermally presynthesized Nb2O5 precursor under different temperatures in air, and the Cu doping amount can be readily controlled by the concentration of the precursor solution, whose effect on the lithium storage behaviors of the Cu-doped Nb2O5 is thoroughly investigated. H-Nb2O5 shows obvious redox peaks (Nb5+/Nb4+ and Nb4+/Nb3+) with much higher capacity and better cycling stability than those for the widely investigated T-Nb2O5. When introducing appropriate Cu doping, the optimized H-Cu0.1-Nb2O5 electrode shows greatly enhanced conductivity and lower diffusion barrier as revealed by the theoretical calculations and electrochemical characterizations, delivering a high reversible capacity of 203.6 mAh g-1 and a high capacity retention of 140.8 mAh g-1 after 5000 cycles at 1 A g-1, with a high initial Coulombic efficiency of 91% and a high rate capacity of 144.2 mAh g-1 at 4 A g-1. As a demonstration for full-cell application, the H-Cu0.1-Nb2O5||LiFePO4 cell displays good cycling performance, exhibiting a reversible capacity of 135 mAh g-1 after 200 cycles at 0.2 A g-1. More importantly, this work offers a new synthesis protocol of the monoclinic Nb2O5 phase with high capacity retention and improved reaction kinetics.

Observation of High-Capacity Monoclinic B-Nb2O5 with Ultrafast Lithium Storage

Apart from Li4Ti5O12, there are few anode substitutes that can be used in commercial high-power lithium-ion batteries. Orthorhombic T-Nb2O5 has recently been proven to be another substitute anode. However, monoclinic B-Nb2O5 of same chemistry is essentially inert for lithium storage, but the underlying reasons are unclear. In order to activate the "inert" B-Nb2O5, herein, nanoporous pseudocrystals to achieve a larger specific capacity of 243 mAh g-1 than Li4Ti5O12 (theoretical capacity: 175 mAh g-1) are proposed. These pseudocrystals are rationally synthesized via a "shape-keep" topological microcorrosion process from LiNbO3 precursor. Compared to pristine B-Nb2O5, experimental investigations reveal that B-Nb2O5- x delivers ≈3000 times higher electronic conductivity and tenfold enhanced Li+ diffusion coefficient. An ≈30% reduction of energy barrier for Li-ion migration is also confirmed by the theoretical calculations. The nanoporous B-Nb2O5- x delivers unique ion/electron transport channels to proliferate the reversible and deeper lithiation, which activate the "inert" B-Nb2O5. The capacitive-like behavior is observed to endow B-Nb2O5- x ultrafast lithium storage ability, harvesting 136 mAh g-1 at 100 C and 72 mAh g-1 even at 250 C, superior to Li4Ti5O12. Pouch-type full cells exhibit the energy density of ≈251 Wh kg-1 and ultrahigh power density up to ≈35 kW kg-1.

Rational design of hollow Ti2Nb10O29 nanospheres towards High-Performance pseudocapacitive Lithium-Ion storage

Ti2Nb10O29, as one of the most promising anode materials for lithium-ion batteries (LIBs), possesses excellent structural stability during lithiation/delithiation cycling and higher theoretical capacity. However, Ti2Nb10O29 faces some challenges, such as insufficient ion diffusion coefficient and poor electronic conductivity. To overcome these problems, this study investigates the effect of applying nanostructure engineering on Ti2Nb10O29 and the lithium storage behaviors. We successfully synthesized hollow Ti2Nb10O29 nanospheres (h-TNO NSs) via solvothermal method using phenolic resin nanospheres as the template. The effects of using a template or not and the annealing atmospheres on the microstructures of the as-prepared Ti2Nb10O29 are investigated. Different nanostructures (porous Ti2Nb10O29 nanoaggregates (p-TNO NAs) without a template and core-shelled Ti2Nb10O29@C nanospheres (cs-TNO@C NSs)) were formed through annealing in Ar. When examined as anodes for LIBs, the h-TNO NSs electrode with hollow spherical structure displayed a better lithium storage performance. Compared to its counterparts, p-TNO NAs and cs-TNO@C NSs, h-TNO NSs electrode exhibited a higher reversible capacity of 282.5 mAh g-1 at 1C, capacity retention of 79.5% (i.e., 224.6 mAh g-1) after 200 cycles, and a higher rate capacity of 173.1 mAh g-1 at 10C after 600 cycles. The excellent electrochemical performance of h-TNO NSs is attributed to the novel structure. The hollow nanospheres with cavities and thin shells not only exposed more active sites and improved ion diffusion, but also buffered the volume variation upon cycling and facilitated electrolyte penetration. This consequently enhanced the lithium storage performance of the electrode and its high pseudocapacitive contribution (90% at 1.0 mV s-1).

In-Depth Investigation of the Mechanism of Dehydration-Induced Phase Transformation from Nb3O7(OH) to H-Nb2O5: A Theoretical and Experimental Approach

H-Nb2O5 is a promising energy material, which can be typically obtained from any other polymorph after conducting high temperature calcination (∼1273 K). Recently, a low-temperature dehydration from Nb3O7(OH) was employed to prepare H-Nb2O5 at 723 K for 2 h, and yet the transformation mechanism has remained unclear in the literature. Here, the dehydration kinetic and phase transformation mechanism of the Nb3O7(OH) were investigated for the first time by experiments, density functional theory, and molecular dynamics calculations. After dehydration, the orthorhombic Nb3O7(OH) initially transformed into an intermediate Nb-O compound with dislocations, preserving parent structure, and subsequently transformed into monoclinic H-Nb2O5. The activation energy for the transformation from Nb3O7(OH) to H-Nb2O5 was as low as 1.35 eV, compared to that of T-Nb2O5 to H-Nb2O5 (3.60 eV). Furthermore, the defect-rich H-Nb2O5 obtained from Nb3O7(OH), does not exhibit pristine bound exciton state due to severe recombination of photogenerated carriers, resulting in poor photocatalytic activity.

Carbon-supported T-Nb2O5 nanospheres and MoS2 composites with a mosaic structure for insertion-conversion anode materials

Reasonably combining the strengths of insertion and conversion anode materials to create an advanced anode material remains a formidable challenge for rechargeable lithium-ion batteries (LIBs). In this work, bulk MoS2 embedded with T-Nb2O5 nanospheres was synthesized via a simple hydrothermal process and a polydopamine carbon source was introduced by heat treatment. The design strategy can effectively accelerate the charge transfer and reduce the volume expansion during electrochemical cycling, leading to an improvement in lithium storage performance. As a consequence, the coexistence of T-Nb2O5, MoS2 and C can achieve the best synergistic effect when the molar ratio of Nb and Mo sources was 1 : 1. Notably, the T-Nb2O5@MoS2@C-1-1 electrode not only delivered an excellent reversible capacity of 518 mA h g-1 at a current density of 0.1 A g-1 but also exhibited superb cycling stability. The specific capacity of this electrode maintained 187 mA h g-1 at 2 A g-1 after 1000 cycles with a negligible capacity fading rate of only 0.015% per cycle.

Polymorphs of Nb2O5 Compound and Their Electrical Energy Storage Applications

Niobium pentoxide (Nb2O5), as an important dielectric and semiconductor material, has numerous crystal polymorphs, higher chemical stability than water and oxygen, and a higher melt point than most metal oxides. Nb2O5 materials have been extensively studied in electrochemistry, lithium batteries, catalysts, ionic liquid gating, and microelectronics. Nb2O5 polymorphs provide a model system for studying structure-property relationships. For example, the T-Nb2O5 polymorph has two-dimensional layers with very low steric hindrance, allowing for rapid Li-ion migration. With the ever-increasing energy crisis, the excellent electrical properties of Nb2O5 polymorphs have made them a research hotspot for potential applications in lithium-ion batteries (LIBs) and supercapacitors (SCs). The basic properties, crystal structures, synthesis methods, and applications of Nb2O5 polymorphs are reviewed in this article. Future research directions related to this material are also briefly discussed.

New insights into the electrochemical performance of precursor derived Si(Nb)OC composites as anode materials for batteries

This work represents a first attempt to synthesize Si(Nb)OC ceramic composites through the polymer pyrolysis or the precursor-derived ceramics (PDC) route for use as a hybrid anode material for lithium-ion batteries (LIB). Electron microscopy, X-ray diffraction, and various spectroscopy techniques were used to examine the micro/nano structural features and phase evolution during cross-linking, pyrolysis, and annealing stages. During the polymer-to-ceramic transformation process, in situ formation of carbon (so-called "free carbon"), and crystallization of t-NbO2, NbC phases in the amorphous Si(Nb)OC ceramic matrix are identified. The first-cycle reversible capacities of 431 mA h g-1 and 256 mA h g-1 for the as-pyrolyzed and annealed Si(Nb)OC electrodes, respectively, exceeded the theoretical Li capacity of niobium pentaoxide or m-Nb2O5 (at approximately 220 mA h g-1). With an average reversible capacity of 200 mA h g-1 and close to 100% cycling efficiency, as-pyrolyzed Si(Nb)OC demonstrates good rate capability. X-ray amorphous SiOC with uniformly distributed nanosized Nb2O5 and graphitic carbon structure likely provides stability during repeated Li+ cycling and the formation of a stable secondary electrolyte interphase (SEI) layer, leading to high efficiency.

Nb2 CTx MXene Derived Polymorphic Nb2 O5

Previously, heat treatment was the only feasible route for tuning the crystal phases of niobium pentoxide (Nb₂ O₅ ). With the use of Nb₂ CT_x MXene precursors, the first case of phase tuning of Nb₂ O₅ in the low-temperature hydrothermal synthesis using sulfuric acid regulating agents is presented. By varying the amount of the agent, four pure-phase Nb₂ O₅ crystals and mixed phases in-between are obtained. The required amount is found to be related to the H-covered surface energy calculated based on density functional theory. Overall, MXene-derived B-phase Nb₂ O₅ is of particular interest due to its exceptionally high capacities as lithium-ion battery anodes, which are three times higher than the routine synthesized one. Oxygen vacancies induced by crystallographic shear would be responsible for the extraordinary performance. The proposed phase tuning strategy encourages the prudent synthesis of difficult-to-obtain crystal phases.

Dense T-Nb2O5/Carbon Microspheres for Ultrafast-(Dis)charge and High-Loading Lithium-Ion Batteries

Orthorhombic niobium pentoxide (T-Nb2O5) is regarded as a potential anode material for lithium-ion batteries (LIBs) due to ultrafast charge/discharge and high safety. However, the poor electronic conductivity and low mass loading of nanostructured T-Nb2O5 limit its practical application in LIBs. Herein, we design and construct dense microspheres consisting of nanostructured T-Nb2O5 embedded in amorphous N-doped carbon (Nb2O5@NC) via a facile method to achieve fast ionic and electronic transport as well as a high mass loading. The dense micro-sized particles with an interconnected carbon network avoid the low mass loading and volumetric energy density of conventional nanostructures. Interconnected pores in the range of a few nanometers are also formed in the Nb2O5@NC microspheres. Notably, at a high mass loading of 12.8 mg cm-2, Nb2O5@NC can achieve a high specific capacity of 171.5 mAh g-1 and an areal capacity of 2.05 mAh cm-2, showing its high lithium storage capacity. The intercalation reaction mechanism with a small volume change during cycling at both crystal lattice and microsphere levels is confirmed by in situ X-ray diffraction and in situ high-resolution transmission electron microscopy. The elegant structure and the electrochemical reaction mechanism disclosed in the work is important for designing ultrafast-(dis)charge electrode materials.

Single-Atom Tailored Hierarchical Transition Metal Oxide Nanocages for Efficient Lithium Storage

Mitigating the mechanical degradation and enhancing the ionic/electronic conductivity are critical but challengeable issues toward improving electrochemical performance of conversion-type anodes in rechargeable batteries. Herein, these challenges are addressed by constructing interconnected 3D hierarchically porous structure synergistic with Nb single atom modulation within a Co₃ O₄ nanocage (3DH-Co₃ O₄ @Nb). Such a hierarchical-structure nanocage affords several fantastic merits such as rapid ion migration and enough inner space for alleviating volume variation induced by intragrain stress and optimized stability of the solid-electrolyte interface. Particularly, experimental studies in combination with theoretical analysis verify that the introduction of Nb into the Co₃ O₄ lattice not only improves the electron conductivity, but also accelerates the surface/near-surface reactions defined as pesudocapacitance behavior. Dynamic behavior reveals that the ensemble design shows huge potential for fast and large lithium storage. These features endow 3DH-Co₃ O₄ @Nb with remarkable battery performance, delivering ≈740 mA h g^-1 after ultra-long cycling of 1000 times under a high current density of 5 A g^-1 . Importantly, the assembled 3DH-Co₃ O₄ @Nb//LiCoO₂ pouch cell also presents a long-lived cycle performance with only ≈0.059% capacity decay per cycle, inspiring the design of electrode materials from both the nanostructure and atomic level toward practical applications.

In Situ Orthorhombic to Amorphous Phase Transition of Nb2O5 and Its Temperature Effect on Pseudocapacitive Behavior

Niobium pentoxide (Nb₂O₅) represents an exquisite class of negative electrode materials with unique pseudocapacitive kinetics that engender superior power and energy densities for advanced electrical energy storage devices. Practical energy devices are expected to maintain stable performance under real-world conditions such as temperature fluctuations. However, the intercalation pseudocapacitive behavior of Nb₂O₅ at elevated temperatures remains unexplored because of the scarcity of suitable electrolytes. Thus, in this study, we investigate the effect of temperature on the pseudocapacitive behavior of submicron-sized Nb₂O₅ in a wide potential window of 0.01-2.3 V. Furthermore, ex situ X-ray diffraction and X-ray photoelectron spectroscopy reveal the amorphization of Nb₂O₅ accompanied by the formation of NbO via a conversion reaction during the initial cycle. Subsequent cycles yield enhanced performance attributed to a series of reversible Nb^V, IV/Nb^III redox reactions in the amorphous Li_xNb₂O₅ phase. Through cyclic voltammetry and symmetric cell electrochemical impedance spectroscopy, temperature elevation is noted to increase the pseudocapacitive contribution of the Nb₂O₅ electrode, resulting in a high rate capability of 131 mAh g^-1 at 20,000 mA g^-1 at 90 °C. The electrode further exhibits long-term cycling over 2000 cycles and high Coulombic efficiency ascribed to the formation of a robust, [FSA]^--originated solid-electrolyte interphase during cycling.