Surface Reconstruction of Cobalt Species on Amorphous Cobalt Silicate-Coated Fluorine-Doped Hematite for Efficient Photoelectrochemical Water Oxidation

Anion Structure Regulation of Cobalt Silicate Hydroxide Endowing Boosted Oxygen Evolution Reaction

Transition metal silicates (TMSs) are attempted for the electrocatalyst of oxygen evolution reaction (OER) due to their special layered structure in recent years. However, defects such as low theoretical activity and conductivity limit their application. Researchers always prefer to composite TMSs with other functional materials to make up for their deficiency, but rarely focus on the effect of intrinsic structure adjustment on their catalytic activity, especially anion structure regulation. Herein, applying the method of interference hydrolysis and vacancy reserve, new silicate vacancies (anionic regulation) are introduced in cobalt silicate hydroxide (CoSi), named SV-CoSi, to enlarge the number and enhance the activity of catalytic sites. The overpotential of SV-CoSi declines to 301 mV at 10 mA cm-2 compared to 438 mV of CoSi. Source of such improvement is verified to be not only the increase of active sites, but also the positive effect on the intrinsic activity due to the enhancement of cobalt-oxygen covalence with the variation of anion structure by density functional theory (DFT) method. This work demonstrates that the feasible intrinsic anion structure regulation can improve OER performance of TMSs and provides an effective idea for the development of non-noble metal catalyst for OER.

Morphology-Controlled ZnO@ZnWO4 Hetero-Nanostructures for Efficient Photooxidation of Water in Near-Neutral pH

One-dimensional ZnO nanorods (NRs) have been extensively studied as photoanodes because of their unique optical properties, high electron mobility, and suitable band positions for water oxidation. However, their practical efficiency is often compromised by chemical instability during water oxidation and high carrier recombination rates. To overcome this issue, precise morphological control of ZnO@ZnWO4 core-shell structured photoanodes, featuring a ZnO core and a ZnWO4 shell was used. This was accomplished by depositing WO3 onto hydrothermally grown ZnO NRs using the thermal chemical vapor deposition process. The photoelectrochemical performance of ZnO@ZnWO4 with an optimized morphology outperforms that of pristine ZnO NRs. Systematic optical and electrochemical analyses of ZnO@ZnWO4 demonstrated that the enhancement is attributed to the enhanced charge transfer efficiency facilitated by the optimized ZnWO4 shells.

Fast Interfacial Carrier Dynamics Modulated by Bidirectional Charge Transport Channels in ZnIn2 S4 -based Composite Photoanodes Probed by Scanning Photoelectrochemical Microscopy

Limited charge separation/transport efficiency remains the primary obstacle of achieving satisfying photoelectrochemical (PEC) water splitting performance. Therefore, it is essential to develop diverse interfacial engineering strategies to mitigate charge recombination. Despite obvious progress having been made, most works only considered a single-side modulation in either the electrons of conduction band or the holes of valence band in a semiconductor photoanode, leading to a limited PEC performance enhancement. Beyond this conventional thinking, we developed a novel coupling modification strategy to achieve a composite electrode with bidirectional carrier transport for a better charge separation, in which Ti2 C3 Tx MXene quantum dots (MQDs) and α-Fe2 O3 nanodots (FO) are anchored on the surface of ZnIn2 S4 (ZIS) nanoplates, resulting in markedly improved PEC water splitting of pure ZIS photoanode. Systematic studies indicated that the bidirectional charge transfer pathways were stimulated due to MQDs as "electron extractor" and S-O bonds as carriers transport channels, which synergistically favors significantly enhanced charge separation. The enhanced kinetic behavior at the FO/MQDs/ZIS interfaces was systematically and quantitatively evaluated by a series of methods, especially scanning photoelectrochemical microscopy. This work may deepen our understanding of interfacial charge separation, and provide valuable guidance for the rational design and fabrication of high-performance composite electrodes.

Fabrication of Hematite Photoanode Consisting of (110)-Oriented Single Crystals

In this work, α-Fe2 O3 photoanode consisted of (110)-oriented α-Fe2 O3 single crystals were synthesized by a facile hydrothermal method. By using particular additive (C4 MimBF4 ) and regulation of hydrothermal reaction time, the Fe-25 consisted of a single-layer of highly crystalline (110)-oriented crystals with fewer grain boundaries, which was vertically grown on the substrate. As a result, the charge separation efficiency and photoelectrochemical (PEC) performance of Fe-25A (Fe-25 after dehydration treatment) have been greatly improved. Fe-25A yields a photocurrent of 1.34 mA cm-2 (1.23 V vs RHE) and an incident photon-to-current conversion efficiency (IPCE) of 31.95 % (380 nm). With the assistance of cobalt-phosphate water oxidation catalyst (Co-Pi), the PEC performance could be further improved by enhancing the holes transfer at electrode/electrolyte interface and inhibiting surface recombination. Fe-25A/Co-Pi yields a photocurrent of 2.67 mA cm-2 (1.23 V vs RHE) and IPCE value of 50.8 % (380 nm), which is 3.67 times and 2.39 times as that of Fe-2A/Co-Pi. Our work provides a simple method to fabricate highly efficient Fe2 O3 photoanodes consist of characteristic (110)-oriented single crystals with high crystallinity and high quality interface contact to enhance charge separation efficiencies.

Imperfect makes perfect: defect engineering of photoelectrodes towards efficient photoelectrochemical water splitting

Photoelectrochemical (PEC) water splitting for hydrogen evolution has been considered as a promising technology to solve the energy and environmental issues. However, the solar-to-hydrogen (STH) conversion efficiencies of current PEC systems are far from meeting the commercial demand (10%) due to the lack of efficient photoelectrode materials. The recent rapid development of defect engineering of photoelectrodes has significantly improved the PEC performance, which is expected to break through the bottleneck of low STH efficiency. In this review, the category and the construction methods of different defects in photoelectrode materials are summarized. Based on the in-depth summary and analysis of existing reports, the PEC performance enhancement mechanism of defect engineering is critically discussed in terms of light absorption, carrier separation and transport, and surface redox reactions. Finally, the application prospects and challenges of defect engineering for PEC water splitting are presented, and the future research directions in this field are also proposed.

CoMoO4-modified hematite with oxygen vacancies for high-efficiency solar water splitting

Hematite is a potential photoelectrode for photoelectrochemical (PEC) water splitting. Nevertheless, its water oxidation efficiency is highly limited by its significant photogenerated carrier recombination, poor conductivity and slow water oxidation kinetics. Herein, under low-vacuum (LV) conditions, we fabricated a CoMoO₄ layer on oxygen-vacancy-modified hematite (CoMo-Fe₂O₃ (LV)) for the first time for efficient solar water splitting. The existence of oxygen vacancies can significantly facilitate the electrical conductivity, while the large onset potential along with oxygen vacancies can be lowered by the CoMoO₄ with accelerated water oxidation kinetics. Therefore, a high photocurrent density of 3.53 mA cm^-2 at 1.23 V_RHE was obtained for the CoMo-Fe₂O₃ (LV) photoanode. Moreover, it can be further coupled with the FeNiOOH co-catalyst to reach a benchmark photocurrent of 4.18 mA cm^-2 at 1.23 V_RHE, which is increased around 4-fold compared with bare hematite (0.90 mA cm^-2). The combination of CoMoO₄, FeNiOOH, and oxygen vacancies may be used as a reasonable strategy for developing high-efficiency hematite-based photoelectrodes for solar water oxidation.

Enhancement of charge separation and hole utilization in a Ni2P2O7-Nd-BiVO4 photoanode for efficient photoelectrochemical water oxidation

It is necessary for photoelectrochemical (PEC) water splitting to reduce the electron-hole recombination rate and enhance the water oxidation reaction kinetics. Here, we prepared Ni₂P₂O₇-Nd-BiVO₄ composite photoanodes by coupling Ni₂P₂O₇ co-catalysts to neodymium (Nd)-doped BiVO₄ surfaces through photo-assisted electrodeposition. The Ni₂P₂O₇-Nd-BiVO₄ photoanode exhibits a high photocurrent density of 3.6 mA cm^-2 at 1.23 V vs reversible hydrogen electrode (RHE), which is three times higher than that of the bare BiVO₄ (1.2 mA cm^-2). Detailed characterizations demonstrate that Nd doping reduces the band gap, significantly increases the carrier density and effectively reduces the charge transfer resistance. More importantly, the Ni₂P₂O₇ co-catalyst has multiple roles. Specifically, it can act as a hole extraction layer to accelerate hole migration and inhibit hole-electron recombination. At the same time, it significantly improves the water oxidation reaction kinetics. In addition, it also provides more water oxidation active sites. This work provides ideas for the design and study of efficient BiVO₄-based photoanodes.

Hematite decorated with nanodot-like cobalt (oxy)hydroxides for boosted photoelectrochemical water oxidation

Photoelectrochemical (PEC) water splitting has been considered as an alternative process to produce green hydrogen. However, the energy conversion efficiency of PEC systems was still limited by the inefficient photoanode. Cocatalysts decoration is regarded as an efficient strategy for improving PEC performance of photoanode. In this work, nanodot-like cobalt (oxy)hydroxides was rationally decorated on hematite to fabricate CoOOH/Fe2O3 photoanode. The resulted CoOOH/Fe2O3 exhibits a high photocurrent density of 1.92 mA cm-2 at 1.23 V vs. RHE, which is 2.6 times than that of bare Fe2O3. In addition, the onset potential displays a cathodic shift of ca. 110 mV, indicating that CoOOH can efficiently accelerate water oxidation kinetics over Fe2O3. The comprehensive PEC and electrochemical characterizations reveal that CoOOH could not only provide abundant accessible Co active sites for water oxidation, but also could passivate the surface states of Fe2O3, thus increase the carrier density and decrease the interfacial resistance. As a result, the PEC water oxidation performance over Fe2O3 was significantly boosted. This work supports that the roles of CoOOH cocatalyst is generic and such CoOOH could be used for other semiconductor-based photoanodes for outstanding PEC water splitting performance.

Cerium-Doped Iron Oxide Nanorod Arrays for Photoelectrochemical Water Splitting

In this work, a simple one-step hydrothermal method was employed to prepare the Ce-doped Fe₂O₃ ordered nanorod arrays (CFT). The Ce doping successfully narrowed the band gap of Fe₂O₃, which improved the visible light absorption performance. In addition, with the help of Ce doping, the recombination of electron/hole pairs was significantly inhibited. The external voltage will make the performance of the Ce-doped sample better. Therefore, the Ce-doped Fe₂O₃ has reached superior photoelectrochemical (PEC) performance with a high photocurrent density of 1.47 mA/cm² at 1.6 V vs. RHE (Reversible Hydrogen Electrode), which is 7.3 times higher than that of pristine Fe₂O₃ nanorod arrays (FT). The Hydrogen (H₂) production from PEC water splitting of Fe₂O₃ was highly improved by Ce doping to achieve an evolution rate of 21 μmol/cm²/h.

Co-Doped Fe3S4 Nanoflowers for Boosting Electrocatalytic Nitrogen Fixation to Ammonia under Mild Conditions

Compared with the Haber Bosch process, the electrochemical nitrogen reduction reaction (NRR) under mild conditions provides an alternative and promising route for ammonia synthesis due to its green and sustainable features. However, the great energy barrier to break the stable N≡N bond hinders the practical application of NRR. Though Fe is the only common metal element in all biological nitrogenases in nature, there is still a lack of study on developing highly efficient and low-cost Fe-based catalysts for N₂ fixation. Herein, Co-doped Fe₃S₄ nanoflowers were fabricated as the intended catalyst for NRR. The results indicate that 4% Co-doped Fe₃S₄ nanoflowers achieve a high Faradaic efficiency of 17% and a NH₃ yield rate of 37.5 μg·h^-1·mg^-1_cat. at -0.55 V versus RHE potential in 0.1 M HCl, which is superior to most Fe-based catalysts. The introduction of Co atoms can not only shift the partial density states of Fe₃S₄ toward the Fermi level but also serve as new active centers to promote N₂ absorption, lowering the energy barrier of the potential determination step to accelerate the catalytic process. This work paves a pathway of the morphology and doping engineering for Fe-based electrocatalysts to enhance ammonia synthesis.

Effective Formation of a Mn-ZIF-67 Nanofibrous Network via Electrospinning: An Active Electrocatalyst for OER in Alkaline Medium

Finding the active center in a bimetallic zeolite imidazolate framework (ZIF) is highly crucial for the electrocatalytic oxygen evolution reaction (OER). In the present study, we constructed a bimetallic ZIF system with cobalt and manganese metal ions and subjected it to an electrospinning technique for feasible fiber formation. The obtained nanofibers delivered a lower overpotential value of 302 mV at a benchmarking current density of 10 mA cm^-2 in an electrocatalytic OER study under alkaline conditions. The obtained Tafel slope and charge-transfer resistance values were 125 mV dec^-1 and 4 Ω, respectively. The kinetics of the reaction is mainly attributed from the ratio of metals (Co and Mn) present in the catalyst. Jahn-Teller distortion reveals that the electrocatalytic active center on the Mn-incorporated ZIF-67 nanofibers (Mn-ZIF-67-NFs) was found to be Mn³⁺ along with the Mn²⁺ and Co²⁺ ions on the octahedral and tetrahedral sites, respectively, where Co²⁺ ions tend to suppress the distortion, which is well supported by density functional theory analysis, molecular orbital study, and magnetic studies.

Revealing the Essential Role of Iron Phosphide and its Surface-Evolved Species in the Photoelectrochemical Water Oxidation by Gd-Doped Hematite Photoanode

Phosphates are easily derived from transition metal phosphides under natural conditions, and the real roles of these two in catalytic reactions are not yet clear. Here, a multiphase FeP/Gd-Fe₂ O₃ shell-core structure photoanode was constructed and explored regarding the real role of FeP and its surface-reconstructed iron phosphate (Fe-Pi) in photoelectrochemical water oxidation. The FeP/Gd-Fe₂ O₃ photoanode exhibited an excellent photocurrent density of 2.56 mA cm^-2 at 1.23 V versus the reversible hydrogen electrode, up to 4 times greater than those of the pristine α-Fe₂ O₃ (0.64 mA cm^-2 ). Detailed studies showed that FeP could act as a photosensitizer to enhance light absorption and as a conductive layer to accelerate charge transfer. The FeP significantly enhanced the incident photon-to-current conversion efficiency of the photoanode and improved the electron transition within the photoanode. Naturally evolved Fe-Pi on the surface provided more active sites for water oxidation. They effectively passivated the surface capture state and synergistically inhibited the electron-hole recombination. Moreover, the in-situ constructed multiphase catalyst had a smaller interfacial contact resistance than the intentionally decorative cocatalyst. This work provides new insight into the understanding of the essential role of transition metal phosphides and their surface-reconstructed species in catalytic reactions.

Controlled Band Offsets in Ultrathin Hematite for Enhancing the Photoelectrochemical Water Splitting Performance of Heterostructured Photoanodes

Formation of type II heterojunctions is a promising strategy to enhance the photoelectrochemical performance of water-splitting photoanodes, which has been tremendously studied. However, there have been few studies focusing on the formation of type II heterojunctions depending on the thickness of the overlayer. Here, enhanced photoelectrochemical activities of a Fe₂O₃ film deposited-BiVO₄/WO₃ heterostructure with different thicknesses of the Fe₂O₃ layer have been investigated. The Fe₂O₃ (10 nm)/BiVO₄/WO₃ heterojunction photoanode shows a much higher photocurrent density compared to the Fe₂O₃ (100 nm)/BiVO₄/WO₃ photoanode. The Fe₂O₃ (10 nm)/BiVO₄/WO₃ trilayer heterojunction anodes have sequential type II junctions, while a thick Fe₂O₃ overlayer forms an inverse type II junction between Fe₂O₃ and BiVO₄. Furthermore, the incident-photon-to-current efficiency measured under back-illumination is higher than those measured under front-illumination, demonstrating the importance of the illumination sequence for light absorption and charge transfer and transport. This study shows that the thickness of the oxide overlayer influences the energy band alignment and can be a strategy to improve solar water splitting performance. Based on our findings, we propose a photoanode design strategy for efficient photoelectrochemical water splitting.

Surface-oxidized titanium diboride as cocatalyst on hematite photoanode for solar water splitting

The PEC performance of α-Fe2O3/SO-TiB2 is attributed to the enhancement of photogenerated charge separation and injection efficiency under the driving force of the interfacial electric field.