Near-Infrared-Light-Modulated Lubricating Coating Enabled by Photothermal Microgels

Photo-Controllable Smart Hydrogels for Biomedical Application: A Review

Nowadays, smart hydrogels are being widely studied by researchers because of their advantages such as simple preparation, stable performance, response to external stimuli, and easy control of response behavior. Photo-controllable smart hydrogels (PCHs) are a class of responsive hydrogels whose physical and chemical properties can be changed when stimulated by light at specific wavelengths. Since the light source is safe, clean, simple to operate, and easy to control, PCHs have broad application prospects in the biomedical field. Therefore, this review timely summarizes the latest progress in the PCHs field, with an emphasis on the design principles of typical PCHs and their multiple biomedical applications in tissue regeneration, tumor therapy, antibacterial therapy, diseases diagnosis and monitoring, etc. Meanwhile, the challenges and perspectives of widespread practical implementation of PCHs are presented in biomedical applications. This study hopes that PCHs will flourish in the biomedical field and this review will provide useful information for interested researchers.

Preparation and Properties of PDMS Surface Coating for Ultra-Low Friction Characteristics

Polydimethylsiloxane (PDMS) has excellent physical-chemical properties and good biocompatibility. Thus, PDMS has been widely applied in biomedical applications. However, the low surface free energy and surface hydrophobicity of PDMS can easily lead to adverse symptoms, such as tissue damage and ulceration, during medical treatment. Therefore, the construction of a hydrophilic low-friction surface on the PDMS surface could be helpful for alleviating patient discomfort and would be of great significance for broadening the application of PDMS in the field of interventional medical catheters. Existing surface modification methods such as hydrogel coatings and chemical grafting suffer from several deficiencies including uncontrollable thickness, surface fragility, and low surface strength. In this study, a hydrophilic surface with ultra-low friction properties was prepared on the surface of PDMS by an ultraviolet light (UV) curing method. The monomer acrylamide (AM) was induced by a photoinitiator to form a coating on the surface of the silicone rubber by in situ polymerization. The surface roughness of the as-prepared coatings was regulated by adding different concentrations of 2-acrylamido-2-methylpropanesulfonic acid (AMPS) to the monomer solution, and the coating properties were systematically characterized. The results indicated that the roughness and thickness of the as-prepared coatings decreased with increasing AMPS concentration and the as-prepared coatings had good hydrophilicity and low-friction properties. The Coefficient of Friction (CoF) was as low as 0.0075 in the deionized water solution, which was 99.7% lower than that of the unmodified PDMS surface. Moreover, the coating with a lower surface roughness exhibited better low-friction properties. The results reported herein provide new insight into the preparation of hydrophilic, low-friction coatings on polymer surfaces.

Synthetic and biopolymeric microgels: Review of similarities and difference in behaviour in bulk phases and at interfaces

This review discusses the current knowledge of interfacial and bulk interactions of biopolymeric microgels in relation to the well-established properties of synthetic microgels for applications as viscosity modifiers and Pickering stabilisers. We present a timeline showing the key milestones in designing microgels and their bulk/ interfacial performance. Poly(N-isopropylacrylamide) (pNIPAM) microgels have remained as the protagonist in the synthetic microgel domain whilst proteins or polysaccharides have been primarily used to fabricate biopolymeric microgels. Bulk properties of microgel dispersions are dominated by the volume fraction (ϕ) of the microgel particles, but ϕ is difficult to pinpoint, as addressed by many theoretical models. By evaluating recent experimental studies over the last five years, we find an increasing focus on the analysis of microgel elasticity as a key parameter in modulating their packing at the interfaces, within the provinces of both synthetic and biopolymeric systems. Production methods and physiochemical factors shown to influence microgel swelling in the aqueous phase can have a significant impact on their bulk as well as interfacial performance. Compared to synthetic microgels, biopolymer microgels show a greater tendency for polydispersity and aggregation and do not appear to have a core-corona structure. Comprehensive studies of biopolymeric microgels are still lacking, for example, to accurately determine their inter- and intra- particle interactions, whilst a wider variety of techniques need to be applied in order to allow comparisons to real systems of practical usage.

Dual-functional MOFs-based hybrid microgel advances aqueous lubrication and anti-inflammation

This paper demonstrates the hybridization of copolymer microgel with drug-loaded metal-organic frameworks nanoparticles that can achieve excellent aqueous lubricating performance and anti-inflammatory effect for synergistic treatment of osteoarthritis (OA). Poly(ethylene glycol)-graft-poly(N-isopropylacrylamide) (PEG-g-PNIPAm) microgel layer is grown on the MIL-101(Cr) surface via one-pot soap-free emulsion polymerization method. The lower critical solution temperature of the MIL-101(Cr)@PEG-g-PNIPAm hybrid is raised significantly by incorporating PEG chains into the PNIPAm microgel matrix, which greatly enhances the high-temperature aqueous dispersion stability. The hybrid microgel demonstrated reversibly thermo-sensitive swelling-collapsing behavior to modulate the optical properties and hydrodynamic size. Using as aqueous lubricating additives, the hybrid reduces over 64% and 97% in friction coefficient and wear volume. Also, the hybrid supports desirable temperature-controlled lubrication modulation due to their reversible thermo-responsive behavior, which is benefit to joint lubrication of OA. After encapsulating anti-inflammatory diclofenac sodium (DS), the DS-MIL-101(Cr)@PEG-g-PNIPAm shows thermo-responsive drug release in aqueous media, which can improve the drug-delivery efficiency. By co-culturing the DS-loaded hybrid with human normal chondrocytes, we demonstrate good biocompatibility and anti-inflammatory effect on the chondrocytes with inflammation by regulating the expression of OA-related genes and proteins. Our work establishes multifunctional MOFs-based hybrid microgel systems for advanced colloids modulation and biomedical application.

Photothermal Hydrogels for Promoting Infected Wound Healing

Photothermal therapies (PTT), with spatiotemporally controllable antibacterial capabilities without inducing resistance, have shown encouraging prospects in the field of infected wound treatments. As an important platform for PTT, photothermal hydrogels exhibit attractive advantages in the field of infected wound treatment due to their excellent biochemical properties and have been intensively explored in recent years. This review summarizes the progress of the photothermal hydrogels for promoting infected wound healing. Three major elements of photothermal hydrogels, i.e., photothermal materials, hydrogel matrix, and construction methods, are introduced. Furthermore, different strategies of photothermal hydrogels in the treatment of infected wounds are summarized. Finally, the challenges and prospects in the clinical treatment of photothermal hydrogels are discussed.

Synergy of Hofmeister effect and ligand crosslinking enabled the facile fabrication of super-strong, pre-stretching-enhanced gelatin-based hydrogels

Hydrogels are becoming increasingly popular in biomedical and soft machine manufacturing, but their practical application is limited by poor mechanical properties. In recent years, Hofmeister effect-enhanced gelatin hydrogels have become popular. However, the synergy of the Hofmeister effect using other toughening methods is still less investigated. We have fabricated an ultra-high strength gelatin-based hydrogel by introducing ligand cross-linking and hydrogen bonds. Unlike conventional double-network hydrogels, the dense physical cross-linking involving sacrificial bonds gives the hydrogel excellent fatigue resistance and self-recovery properties. The enhancement of mechanical properties by the Hofmeister effect is attributed to the disruption of the hydration shell of the gelatin molecular chains, which leads to stronger interactions between the molecular chains. The mechanical properties of the hydrogels are adjustable over a wide range by varying the concentration of the soaked (NH₄)₂SO₄ solution. The fixation of the gelatin molecular chain orientation by the Hofmeister effect and the reorganization of the coordination bonds allow the hydrogels to be self-reinforced by pre-stretching. At the same time, the modulus contraction of hydrogels in high-concentration salt solutions, and relaxation and swelling in dilute solutions exhibit ionic stimulation responses and shape recovery capability, and hybrid hydrogels have great potential as bio-actuators.

Construction of Core-Shell NanoMOFs@microgel for Aqueous Lubrication and Thermal-Responsive Drug Release

The construction of porous nanocarriers with good lubricating performance and stimuli-responsive drug release is significant for the synergetic therapy of osteoarthritis (OA). Although metal-organic framework nanoparticles (nanoMOFs) as carriers can support drug delivery, achieving the synergy of aqueous lubrication and stimuli-responsive drug release is challenging. In this work, a core-shell nanoMOFs@poly(N-isopropylacrylamide) (PNIPAm) microgel hybrid via one-pot soap-free emulsion polymerization is developed. Programmable growth of the PNIPAm microgel layer on the surface of nanoMOFs is achieved by tuning the concentration of the monomer and the crosslinker in the reaction. Reversible swelling-collapsing behaviors of the hybrid are realized by tuning the temperature below and above the lower critical solution temperature. When used as water lubrication additives, the hybrid enables reductions in both the coefficient of friction and wear volume. In vitro thermal-responsive drug release is demonstrated on the diclofenac sodium-loaded hybrid by controlling the swelling and collapsing states of the PNIPAm nanolayer. Moreover, the good biocompatibility of the hybrid is verified by culturing toward HeLa and BEAS-2B cells. These results establish a nanoMOFs@microgel hybrid that can achieve friction and wear reduction and thermal-responsive drug release.