Impact of the Structural Modification of Diamondoid Cd(II) MOFs on the Nonlinear Optical Properties

Simultaneous Cycloadditions in the Solid State via Supramolecular Assembly

Chemical reactions conducted in the solid phase (specifically, crystalline) are much less numerous than solution reactions, primarily due to reduced motion, flexibility, and reactivity. The main advantage of crystalline-state transformations is that reactant molecules can be designed to self-assemble into specific spatial arrangements, often leading to high control over product regiochemistry and/or stereochemistry. In crystalline-phase transformations, typically only one type of reaction occurs, and a sacrificial template molecule is frequently used to facilitate self-assembly, similar to a catalyst or enzyme. Here, we demonstrate the first system designed to undergo two chemically unique and orthogonal cycloaddition reactions simultaneously within a single crystalline solid. Well-controlled supramolecular self-assembly of two molecules containing different reactive moieties affords orthogonal reactivity without use of a sacrificial template. Using only UV light, the simultaneous [2+2] and [4+4] cycloadditions are achieved regiospecifically, stereospecifically, and products are obtained in high yield, whereas a simultaneous solution-state reaction affords a mixture of isomers in low yield. Application of dually-reactive systems toward (supra)molecular solar thermal storage materials is also discussed. This work demonstrates fundamental chemical approaches for orthogonal reactivity in the crystalline state and highlights the complexity and reversibility that can be achieved with supramolecular design.

Enhancing Two-Photon Excited Fluorescence of Metal-Organic Framework Single Crystals through Modulation of Inorganic Nodes

Regulation of the two-photon excited fluorescence (TPEF) emission intensity and wavelength of metal-organic framework (MOF) crystals with similar constitutions presents a significant challenge. In this study, two MOFs, Zn-BTPPA and Cd3-BTPPA, were constructed using tetrakis(1,1'-biphenyl-4-carboxylic acid)-1,4-benzenediamine (H4BTPPA) as the organic ligand and mononuclear Zn and trinuclear Cd3 inorganic nodes, respectively. The incorporation of H4BTPPA within the MOF structures enables effective TPEF emission in both Zn-BTPPA and Cd3-BTPPA. The TPEF results show that Zn-BTPPA and Cd3-BTPPA exhibited strong emissions at 523 and 463 nm, respectively, when excited with a 780 nm laser. Moreover, Zn-BTPPA and Cd3-BTPPA exhibited much higher two-photon absorption cross sections, approximately 4.9 and 5.2 times higher than that of the reported dinuclear MOF, Cd2-BTPPA, with a similar composition, respectively. With different inorganic nodes, the stacking of chromophores, π···π interactions, and ligand geometry were found to correlate with the enhanced TPEF in Cd3-BTPPA and the blue-shifted TPEF in Zn-BTPPA. This work serves as an inspiration for designing efficient TPEF MOF materials based on the structure-property relationship.

Ingenious Modulation of Third-Order Nonlinear Optical Response of Zr-MOFs through Defect Engineering Based on a Mixed-Linker Strategy

Defect engineering plays a pivotal role in regulating electronic structure and facilitating charge transfer, yielding captivating effects on third-order nonlinear optical (NLO) properties. In this work, we utilized a mixed-linker strategy to intentionally disrupt the initial periodic arrangement of UiO-66 and construct defects. Specifically, we incorporated tetrakis(4-carboxyphenyl)porphyrin (TCPP) with an exceptionally electron-rich delocalization system into the framework of UiO-66 using a one-pot solvothermal method, ingeniously occupying the partial distribution sites of the Zr6 clusters. Compared to UiO-66, the NLO absorption and refraction performance of TCPP/UiO-66 were significantly improved. Additionally, due to the presence of nitrogen-rich sites that can accommodate metal ions in the porphyrin ring of TCPP, Co(II), Ni(II), Cu(II), and Zn(II) are introduced into TCPP/UiO-66, extending the d-π conjugation effect to further regulate the defects. The NLO absorption behavior transforms saturation absorption (SA) to reverse saturation absorption (RSA), while the refraction behavior shifts from self-defocusing to self-focusing. This work shows that defects can effectively regulate the electronic structure, while TCPP plays a crucial role in significantly enhancing electron delocalization.

An amine decorated MOF for direct capture of CO2 from ambient air

A Zn(II)-based metal-organic framework (MOF) was synthesized by the self-assembly of the dicarboxylate ligand terephthalic acid (TPA), 2-aminoterephthalic acid (NH2-TPA) and N-donor auxiliary ligand 1,4-bis(4-pyridinylmethyl)piperazine (bpmp) using Zn(NO3)2·6H2O under hydrothermal conditions. {[Zn(TPA)0.5(NH2TPA)0.5(bpmp)]·DMF·7H2O}n (framework 1) has an sra topology with a BET surface area of 756 m2 g-1. The microporous nature of the framework is apparent from the significant CO2 adsorption capacities observed at various temperatures: 57 cc g-1 at 283 K, 46 cc g-1 at 293 K, 37 cc g-1 at 303 K, and 30 cc g-1 at 313 K. The considerable CO2 adsorption may be caused by the existence of free carboxylate and amine substituents that interact with the gas molecules and micropores. At room temperature, the activated MOF readily converts CO2 into cyclic carbonates when a suspension of the MOF is bubbled with ambient air and different epoxides under solvent-free conditions. The amine groups located within the pores of the MOF interact with CO2 molecules, enhancing their sorption and conversion to cyclic carbonates. However, due to interpenetration within framework 1, only smaller size epoxides can be accommodated and converted to cyclic carbonates in good yields. Additionally, the effectiveness of the catalyst is further confirmed by the positive outcomes obtained from the hot filtration control test. Grand canonical Monte Carlo (GCMC) molecular simulations were utilized to gain a better understanding of molecular interactions. GCMC results are in line with the experiments. The substantial adsorption of CO2 can be ascribed to the strong intermolecular interactions that occur between the amine groups within the framework and the CO2 molecules.

SCSC Transformation and Post-Synthesis Modification of MOFs with Proton Conduction and Ratiometric Fluorescence-Sensing Properties

The modification of metal-organic framework (MOF) materials to facilitate their practical applications is an extremely challenging and meaningful topic. In this work, two stepwise modification strategies for MOFs were conducted. First, we have demonstrated a single-crystal-to-single-crystal (SCSC) transformation from a microporous three-dimensional (3D) MOF to a two-dimensional (2D) coordination polymer (CP). The centrosymmetric [Cd(3-bpdb)(MeO-ip)]_n (1) transforms into a chiral [Cd₂(3-bpdb)(MeO-ip)₂(CH₃OH)₂]_n (2), which is triggered by the reaction time with methanol that acts as a structure-directing agent. The conversion relationship of 1 to 2 at different reaction times was studied in detail. Density functional theory (DFT) calculations clearly state that the irreversible formation of 2 is thermodynamically favorable. Intriguingly, 2 exhibits good proton conduction of 1.34 × 10^-3 S cm^-1 under 363 K and 98% relative humidity (RH) due to unique H-bond network characteristics. To the best of our knowledge, there are very few cases of 3D to 2D SCSC transformation stimulated by reaction time. The results have important implications for understanding the SCSC transformation mechanism and synthetic chemistry. On the other hand, the lanthanide³⁺-functionalized hybrids (Ln³⁺-MOF), Ln³⁺@1, were continuously prepared by incorporating luminescent Ln³⁺ ions into the structure of 1 through encapsulating post-synthesis modification (PSM). Tb³⁺@1 exhibits double emission in water and shows visual ratiometric fluorescence behavior for sensing glutamic acid (Glu), tryptophan (Trp), and Al³⁺, which is more reliable and accurate than single emission. Our work may not only provide new insights into the multiple modification of MOF materials but also promote the practical application of such materials.

Largely Entangled Diamondoid Framework with High-Density Urea and Divergent Metal Nodes for Selective Scavenging of CO2 and Molecular Dimension-Mediated Size-Exclusive H-Bond Donor Catalysis

Pore environment modulation with high-density polarizing groups in metal-organic frameworks (MOFs) can effectively accomplish selective and multicyclic carbon dioxide (CO₂) adsorption, whereas the incorporation of task-specific organic sites inside these porous vessels promise to evade self-quenching, solubility, and recyclability issues in hydrogen-bond donating (HBD) catalysis. However, concurrent amalgamation of both these attributes over a single platform is rare but extremely demanding in view of sustainable applications. We designed a robust diamondoid framework CSMCRI-17 (CSMCRI = Central Salt and Marine Chemicals Research Institute) from the mixed-ligand assembly of azo group-containing dicarboxylate ligand, urea-functionalized pyridyl linker, and Zn(II) nodes with specific divergent coordination. Seven-fold interpenetration to the microporous structure largely augments N-rich functionality that facilitates high CO₂ uptake in the activated form (17a) with good CO₂ selectivity over N₂ and CH₄ that outperform many reported materials. The framework displays very strong CO₂ affinity and no reduction in adsorption capacity over multiple uptake-release cycles. Benefitting from the pore-wall decoration with urea functionality from the pillaring strut, 17a further demonstrates hydrogen-bond-mediated Friedel-Crafts alkylation of indole with β-nitrostyrene under mild conditions, with multicyclic usability and excellent reactivity toward wide ranges of substituted nucleophiles and electrophiles. Interestingly, interpenetration-generated optimum-sized pores induce poor conversion to sterically encumbered substrate via molecular dimension-mediated size selectivity that is alternatively ascribed from additional control experiments and support the occurrence of HBD reaction within the MOF cavity. The catalytic path is detailed in light of the change of emission intensity of the framework by the electrophile as well as the judicious choice of the substrate, which authenticates the prime role of urea moiety-governed two-point hydrogen bonding.

The Advanced Synthesis of MOFs-Based Materials in Photocatalytic HER in Recent Three Years

Since the advent of metal–organic frameworks (MOFs), researchers have paid extensive attention to MOFs due to their determined structural composition, controllable pore size, and diverse physical and chemical properties. Photocatalysis, as a significant application of MOFs catalysts, has developed rapidly in recent years and become a research hotspot continuously. Various methods and approaches to construct and modify MOFs and their derivatives can not only affect the structure and morphology, but also largely determine their properties. Herein, we summarize the advanced synthesis of MOFs-based materials in the field of the photocatalytic decomposition of water to produce hydrogen in the recent three years. The main contents include the overview of the novel synthesis strategies in four aspects: internal modification and structure optimization of MOFs materials, MOFs/semiconductor composites, MOFs/COFs-based hybrids, and MOFs-derived materials. In addition, the problems and challenges faced in this direction and the future development goals were also discussed. We hope this review will help deepen the reader’s understanding and promote continued high-quality development in this field.

Pillar-Layer Chiral MOFs as a Crystalline Platform for Circularly Polarized Luminescence and Single-Phase White-Light Emission

The construction of circularly polarized luminescence (CPL) materials with high porosity and high rigidity is still challenging. Herein, we propose a chiral reticular chemistry strategy to prepare the homochiral porous metal-organic frameworks (MOFs) as CPL-active materials. Two pairs of enantiomeric MOFs are synthesized through the self-assembly of chiral D/L-cam (DL-camphorates) and achiral fluorescent ligand TPB (1,2,4,5-tetra(pyridin-4-yl)benzene). The g_lum values of Cd-CMOF-D and Cd-CMOF-L were up to 0.010 and 0.009; the high g_lum values could be compared to those of the partially pure multicomponent self-assembly systems obtained by the complicated process. We further trace the generation and transfer of the hierarchical chirality from chiral molecule to 3D framework, demonstrating that the CPL was dominated by the original molecular chirality rather than the global chirality of the hierarchical structure. Moreover, the single-phase white-light materials with nearly ideal CIE coordinates (0.33, 0.33) were constructed through the introduction of dye emitters into Zn-CMOF (Zn-based chiral MOF). This work provided not only an insightful view of the chirality transfer and disappearance mechanism but also an efficient method for the preparation of the highly porous CPL materials.