Flexible Stannum-Doped SrTiO3 Nanofiber Membranes for Highly Sensitive and Reliable Piezoresistive Pressure Sensors

TiO2/SiO2 spiral crimped Janus fibers engineered for stretchable ceramic membranes with high-temperature resistance

The tensile brittleness of ceramic nanofibrous materials makes them unable to withstand the relatively large fracture strain, greatly limiting their applications in extreme environments such as high or ultra-low temperatures. Herein, highly stretchable and elastic ceramic nanofibrous membranes composed of titanium dioxide/silicon dioxide (TiO2/SiO2) bicomponent spiral crimped Janus fibers were designed and synthesized via conjugate electrospinning combined with calcination treatment. Owing to the opposite charges attached, the two fibers assembled side by side to form a Janus structure. Interestingly, radial shrinkage differences existed on the two sides of the TiO2/SiO2 composite nanofibers, constructing a helical crimp structure along the fiber axis. The special configuration effectively improves the stretchability of TiO2/SiO2 ceramic nanofibrous membranes, with up to 70.59% elongation at break, excellent resilience at 20% tensile strain and plastic deformation of only 3.48% after 100 cycles. Additionally, the relatively fluffy ceramic membranes constructed from spiral crimped Janus fibers delivered a lower thermal conductivity of 0.0317 W m-1 K-1, attributed to the increased internal still air content. This work not only reveals the attractive tensile mechanism of ceramic membranes arising from the highly curly nanofibers, but also proposes an effective strategy to make the ceramic materials withstand the complex dynamic strain in extreme temperature environments (from -196 °C to 1300 °C).

Strong and Robust Core-Shell Ceramic Fibers Composed of Highly Compacted Nanoparticles for Multifunctional Electronic Skin

Functional fibers composed of textiles are considered a promising platform for constructing electronic skin (e-skin). However, developing robust electronic fibers with integrated multiple functions remains a formidable task especially when a complex service environment is concerned. In this work, a continuous and controllable strategy is demonstrated to prepare e-skin-oriented ceramic fibers via coaxial wet spinning followed by cold isostatic pressing. The resulting core-shell structured fiber with tightly compacted Al-doped ZnO nanoparticles in the core and highly ordered aramid nanofibers in the shell exhibit excellent tensile strength (316 MPa) with ultra-high elongation (33%). Benefiting from the susceptible contacts between conducting ceramic nanoparticles, the ceramic fiber shows both ultrahigh sensitivity (gauge factor = 2141) as a strain sensor and a broad working range up to 70 °C as a temperature sensor. Furthermore, the tunable core-shell structure of the fiber enables the optimization of impedance matching and attenuation of electromagnetic waves for the corresponding textile, resulting in a minimum reflection loss of -39.1 dB and an effective absorption bandwidth covering the whole X-band. Therefore, the versatile core-shell ceramic fiber-derived textile can serve as a stealth e-skin for monitoring the motion and temperature of robots under harsh conditions.

Anti-Oxidized Self-Assembly of Multilayered F-Mene/MXene/TPU Composite with Improved Environmental Stability and Pressure Sensing Performances

MXenes, as emerging 2D sensing materials for next-generation electronics, have attracted tremendous attention owing to their extraordinary electrical conductivity, mechanical strength, and flexibility. However, challenges remain due to the weak stability in the oxygen environment and nonnegligible aggregation of layered MXenes, which severely affect the durability and sensing performances of the corresponding MXene-based pressure sensors, respectively. Here, in this work, we propose an easy-to-fabricate self-assembly strategy to prepare multilayered MXene composite films, where the first layer MXene is hydrogen-bond self-assembled on the electrospun thermoplastic urethane (TPU) fibers surface and the anti-oxidized functionalized-MXene (f-MXene) is subsequently adhered on the MXene layer by spontaneous electrostatic attraction. Remarkably, the f-MXene surface is functionalized with silanization reagents to form a hydrophobic protective layer, thus preventing the oxidation of the MXene-based pressure sensor during service. Simultaneously, the electrostatic self-assembled MXene and f-MXene successfully avoid the invalid stacking of MXene, leading to an improved pressure sensitivity. Moreover, the adopted electrospinning method can facilitate cyclic self-assembly and the formation of a hierarchical micro-nano porous structure of the multilayered f-MXene/MXene/TPU (M-fM2T) composite. The gradient pores can generate changes in the conductive pathways within a wide loading range, broadening the pressure detection range of the as-proposed multilayered f-MXene/MXene/TPU piezoresistive sensor (M-fM2TPS). Experimentally, these novel features endow our M-fM2TPS with an outstanding maximum sensitivity of 40.31 kPa-1 and an extensive sensing range of up to 120 kPa. Additionally, our M-fM2TPS exhibits excellent anti-oxidized properties for environmental stability and mechanical reliability for long-term use, which shows only ~0.8% fractional resistance changes after being placed in a natural environment for over 30 days and provides a reproducible loading-unloading pressure measurement for more than 1000 cycles. As a proof of concept, the M-fM2TPS is deployed to monitor human movements and radial artery pulse. Our anti-oxidized self-assembly strategy of multilayered MXene is expected to guide the future investigation of MXene-based advanced sensors with commercial values.

Highly sensitive piezoresistive and thermally responsive fibrous networks from the in situ growth of PEDOT on MWCNT-decorated electrospun PU fibers for pressure and temperature sensing

Flexible electronics have demonstrated various strategies to enhance the sensory ability for tactile perception and wearable physiological monitoring. Fibrous microstructures have attracted much interest because of their excellent mechanical properties and fabricability. Herein, a structurally robust fibrous mat was first fabricated by electrospinning, followed by a sequential process of functionalization utilizing ultrasonication treatment and in situ polymerization growth. Electrospun polyurethane (PU) microfibers were anchored with multi-walled carbon nanotubes (MWCNTs) to form conductive paths along each fiber by a scalable ultrasonic cavitation treatment in an MWCNT suspension. After, a layer of poly(3,4-ethylene dioxythiophene) (PEDOT) was grown on the surface of PU fibers decorated with MWCNTs to enhance the conductive conjunctions of MWCNTs. Due to the superior electromechanical behaviors and mechanical reinforcement of PEDOT, the PEDOT/MWCNT@PU mat-based device exhibits a wide working range (0-70 kPa), high sensitivity (1.6 kPa-1), and good mechanical robustness (over 18,000 cycles). The PEDOT/MWCNT@PU mat-based sensor also demonstrates a good linear response to different temperature variations because of the thermoelectricity of the PEDOT/MWCNT composite. This novel strategy for the fabrication of multifunctional fibrous mats provides a promising opportunity for future applications for high-performance wearable devices.

Computer-aided screening of aspiration risks in dysphagia with wearable technology: a Systematic Review and meta-analysis on test accuracy

Aspiration caused by dysphagia is a prevalent problem that causes serious health consequences and even death. Traditional diagnostic instruments could induce pain, discomfort, nausea, and radiation exposure. The emergence of wearable technology with computer-aided screening might facilitate continuous or frequent assessments to prompt early and effective management. The objectives of this review are to summarize these systems to identify aspiration risks in dysphagic individuals and inquire about their accuracy. Two authors independently searched electronic databases, including CINAHL, Embase, IEEE Xplore^® Digital Library, PubMed, Scopus, and Web of Science (PROSPERO reference number: CRD42023408960). The risk of bias and applicability were assessed using QUADAS-2. Nine (n = 9) articles applied accelerometers and/or acoustic devices to identify aspiration risks in patients with neurodegenerative problems (e.g., dementia, Alzheimer's disease), neurogenic problems (e.g., stroke, brain injury), in addition to some children with congenital abnormalities, using videofluoroscopic swallowing study (VFSS) or fiberoptic endoscopic evaluation of swallowing (FEES) as the reference standard. All studies employed a traditional machine learning approach with a feature extraction process. Support vector machine (SVM) was the most famous machine learning model used. A meta-analysis was conducted to evaluate the classification accuracy and identify risky swallows. Nevertheless, we decided not to conclude the meta-analysis findings (pooled diagnostic odds ratio: 21.5, 95% CI, 2.7-173.6) because studies had unique methodological characteristics and major differences in the set of parameters/thresholds, in addition to the substantial heterogeneity and variations, with sensitivity levels ranging from 21.7% to 90.0% between studies. Small sample sizes could be a critical problem in existing studies (median = 34.5, range 18-449), especially for machine learning models. Only two out of the nine studies had an optimized model with sensitivity over 90%. There is a need to enlarge the sample size for better generalizability and optimize signal processing, segmentation, feature extraction, classifiers, and their combinations to improve the assessment performance. Systematic Review Registration: (https://www.crd.york.ac.uk/prospero/), identifier (CRD42023408960).

Plasmonic Bridge Sensor Enabled by Carbon Nanotubes and Au-Ag Nano-Rambutan for Multifunctional Detection of Biomechanics and Bio/Chemical Molecules

Wearable, noninvasive, and simultaneous sensing of subtle strains and eccrine molecules on human body is essential for future health monitoring and personalized medicine. However, there is a huge chasm between biomechanics and bio/chemical molecule detections. Here, a wearable plasmonic bridge sensor with multiple abilities to monitor subtle strains and molecules is developed. Hollow Au-Ag nano-rambutans and carbon nanotubes (CNTs) are adsorbed in the nonwoven fabrics (NWFs) conjointly, where the gap between the conducting network of CNTs is bridged by the Au-Ag nano-rambutans during the subtle strain sensing, and the detection sensitivity for stress is improved at least 1 order of magnitude compared to that with the only CNTs. In order to acquire the accurate human action recognition, a machine learning algorithm (support vector machines) based on output biomechanics data is designed. The average accuracy of our plasmonic bridge sensor reaches 89.0% for human action recognition. Moreover, due to the hollow structure and high nanoroughness, the single Au-Ag nano-rambutan particle has strong localized surface plasmon resonance effect and high surface-enhanced Raman scattering (SERS) activity. Based on their unique SERS spectra introduced by the hollow Au-Ag nano-rambutan adsorbed in the NWFs, noninvasive extraction and "fingerprint" recognition of bio/chemical molecules could be realized during the wearable sensing. In sum, the NWFs/CNTs/Au-Ag sensor bridges the barrier between the bodily strain detection and molecule recognition during the wearable sensing. Such integrated and multifunctional sensing strategy for universal biomechanics and bio/chemical molecules means to assess human health to be of importance.

Black phosphorous-based human-machine communication interface

Assistive technology involving auditory feedback is generally utilized by those who are visually impaired or have speech and language difficulties. Therefore, here we concentrate on an auditory human-machine interface that uses audio as a platform for conveying information between visually or speech-disabled users and society. We develop a piezoresistive tactile sensor based on a black phosphorous and polyaniline (BP@PANI) composite by the facile chemical oxidative polymerization of aniline on cotton fabric. Taking advantage of BP's puckered honeycomb lattice structure and superior electrical properties as well as the vast wavy fabric surface, this BP@PANI-based tactile sensor exhibits excellent sensitivity, low-pressure sensitivity, reasonable response time, and good cycle stability. For a real-world application, a prototype device employs six BP@PANI tactile sensors that correspond to braille characters and can convert pressed text into audio on reading or typing to assist visually or speech-disabled persons. Overall, this research offers promising insight into the material candidates and strategies for the development of auditory feedback devices based on layered and 2D materials for human-machine interfaces.

Swallow Detection with Acoustics and Accelerometric-Based Wearable Technology: A Scoping Review

Swallowing disorders, especially dysphagia, might lead to malnutrition and dehydration and could potentially lead to fatal aspiration. Benchmark swallowing assessments, such as videofluoroscopy or endoscopy, are expensive and invasive. Wearable technologies using acoustics and accelerometric sensors could offer opportunities for accessible and home-based long-term assessment. Identifying valid swallow events is the first step before enabling the technology for clinical applications. The objective of this review is to summarize the evidence of using acoustics-based and accelerometric-based wearable technology for swallow detection, in addition to their configurations, modeling, and assessment protocols. Two authors independently searched electronic databases, including PubMed, Web of Science, and CINAHL. Eleven (n = 11) articles were eligible for review. In addition to swallowing events, non-swallowing events were also recognized by dry (saliva) swallowing, reading, yawning, etc., while some attempted to classify the types of swallowed foods. Only about half of the studies reported that the device attained an accuracy level of >90%, while a few studies reported poor performance with an accuracy of <60%. The reviewed articles were at high risk of bias because of the small sample size and imbalanced class size problem. There was high heterogeneity in assessment protocol that calls for standardization for swallowing, dry-swallowing and non-swallowing tasks. There is a need to improve the current wearable technology and the credibility of relevant research for accurate swallowing detection before translating into clinical screening for dysphagia and other swallowing disorders.

Efficacy of Electrospun Nanofiber Membranes on Fouling Mitigation: A Review

Despite the advantages of high contaminant removal, operational flexibility, and technical advancements offered, the undesirable fouling property of membranes limits their durability, thus posing restrictions on their usage. An enormous struggle is underway to conquer this major challenge. Most of the earlier reviews include the basic concepts of fouling and antifouling, with respect to particular separation processes such as ultrafiltration, nanofiltration, reverse osmosis and membrane bioreactors, graphene-based membranes, zwitterionic membranes, and so on. As per our knowledge, the importance of nanofiber membranes in challenging the fouling process has not been included in any record to date. Nanofibers with the ability to be embedded in any medium with a high surface to volume ratio play a key role in mitigating the fouling of membranes, and it is important for these studies to be critically analyzed and reported. Our Review hence intends to focus on nanofiber membranes developed with enhanced antifouling and biofouling properties with a brief introduction on fabrication processes and surface and chemical modifications. A summary on surface modifications of preformed nanofibers is given along with different nanofiller combinations used and blend fabrication with efficacy in wastewater treatment and antifouling abilities. In addition, future prospects and advancements are discussed.

All-Nanofiber Network Structure for Ultrasensitive Piezoresistive Pressure Sensors

Sensing materials with fiber structures are excellent candidates for the fabrication of flexible pressure sensors due to their large specific surface area and abundant contact points. Here, an ultrathin, flexible piezoresistive pressure sensor that consists of a multilayer nanofiber network structure prepared via a simple electrospinning technique is reported. The ultrathin sensitive layer is composite nanofiber films composed of poly (3,4-ethylenedioxythiophene):poly (styrenesulfonate) and polyamide 6 (PEDOT:PSS/PA6) prepared by simultaneous electrospinning. PEDOT:PSS conductive fibers and PA6 elastic fibers are interwoven to form a multilayer network structure that can achieve ultrahigh sensitivity by forming a wealth of contact points during loading. In particular, gold-deposited PA6 fibers as upper and lower flexible electrodes can effectively increase the initial resistance. Due to this special fiber electrode structure, the sensor is able to generate a large electrical signal variability when subjected to a weak external force. The devices with different sensing properties can be obtained by controlling the electrospinning time. The sensor based on the PEDOT:PSS/PA6 nanofiber network has high sensitivity (6554.6 kPa^-1 at 0-1.4 kPa), fast response time (53 ms), and wide detection range (0-60 kPa). Significantly, the device maintains ultrahigh sensitivity when cyclically loaded over 10,000 cycles at 5 kPa, which makes it have great prospects for applications in human health monitoring and motion monitoring.