Biomimetic Aligned Micro-/Nanofibrous Composite Membranes with Ultrafast Water Transport and Evaporation for Efficient Indoor Humidification

Spontaneous thermal energy transfer and anti-gravitational water pumping using Al2O3 fiber-enhanced flexible nonwoven material as a high-performance and self-floating solar evaporator

Solar-driven evaporation is promising to address water scarcity. However, preserving the heat inside evaporators instead of allowing run-off, and synergistically utilizing it to wick water from the bulk, is still underexplored. Herein, a dual-functional bridge of longitudinal orientated channels of Al2O3 fibers (AOFs) embedded in a multi-layered nonwoven evaporator was proposed to create a buffer for spontaneous thermal conduction and anti-gravitational water pumping. As a self-floating system with high porosity and flexibility, benefiting from the strong water transporting ability and high thermal conductivity of the AOFs, a superhigh evaporation rate (2.79 kg m-2 h-1 under 1 sun) can be achieved with great stability and durability. This work highlights the potential of promoting thermal management using a large-scale vapour chamber and mass-producible nonwoven technology to prepare a high-performance evaporator for practical applications.

Self-Adaptive Rapid Thermal Conductive Fabrics Based on Hygroscopic Shrinkage Response for Personal Cooling and Drying

Advanced fabrics with thermal wet management capability as low energy consumption media contribute to personal cooling and drying. Nevertheless, it remains a great challenge to obtain intelligent fabrics with adjustable thermal conductivity (TC) capable of bridging the supply and demand between human body temperature and self-adaptive thermal conduction. Herein, we report hygroscopic-shrinkage nanofiber-based fabrics with excellent moisture sensitivity and significant volume shrinkage, which benefits the construction of high-density thermal conductive pathways by absorbing sweat, with a maximum sweat absorption rate reaching up to 1781%. The TC of the shrunken fabric is significantly increased from the initial 0.102 to 0.731 W·m-1 K-1 with a volume shrinkage rate of 89% due to the synergistic effect of van der Waals force, capillary force, viscous resistance, and gravity. Besides, an enhanced TC of the resulting fabrics facilitates rapid heat transfer to the environments. By capturing the surface temperature variations of the fabric after shrinkage and commercially available cotton/Coolmax, we obtained the fabric that releases the same amount of heat in a shorter period of time (3.3 s). With its exceptional personal thermal and wet management properties, this study paves the way for designing new-generation intelligent fabrics capable of creating more comfortable microclimates.

Chitosan/silk fibroin nanofibers-based hierarchical sponges accelerate infected diabetic wound healing via a HClO self-producing cascade catalytic reaction

The diabetic chronic wound healing is extremely restricted by issues such as hyperglycemia, excessive exudate and reactive oxygen species (ROS), and bacterial infection, causing significant disability and fatality rate. Herein, the chitosan/silk fibroin nanofibers-based hierarchical 3D sponge (CSSF-P/AuGCs) with effective exudate transfer and wound microenvironment modulation are produced by integrating cascade reactor (AuGC) into sponge substrates with parallel-arranged microchannels. When applied to diabetic wounds, the uniformly parallel-arranged microchannels endow CSSF-P/AuGCs with exceptional exudate absorption capacity, keeping the wound clean and moist; additionally, AuGCs efficiently depletes glucose in wounds to generate H2O2, which is then converted into HClO via cascade catalytic reaction to eliminate bacterial infection and reduce inflammation. Experiments in vitro demonstrated that the antibacterial activity of CSSF-P/AuGCs against S. aureus and E. coli was 92.7 and 94.27 %, respectively. Experiments on animals indicated that CSSF-P/AuGC could cure wounds in 11 days, displaying superior wound-healing abilities when compared to the commercial medication Tegaderm™. This versatile CSSF-P/AuGCs dressing may be an attractive choice for expediting diabetic wound healing with little cytotoxicity, providing a novel therapeutic method for establishing a favorable pathological microenvironment for tissue repair.

Moisture wicking textiles with hydrophilic oriented polyacrylonitrile layer: Enabling ultrafast directional water transport

Functional textiles with high-performance directional water transport for regulating human sweat are in high demand because of growing concerns about the role of comfort in the performance of wearer. However, the fabrication of such materials remains a critical job. Here, we report a facile strategy to develop hydrophilic oriented polyacrylonitrile (HOPAN)/hydrophilic polylactic acid @polyvinylidene fluoride (HPLA@PVDF) composite membrane with surface energy gradient for enhanced directional water transport. Three step fabrication strategy involves electrospinning of oriented polyacrylonitrile (OPAN fibers) on polylactic acid (PLA) nonwoven surface followed by dip-coating in hydrophilic agent, and single-side electrospray of PVDF dilute solution on HOPAN/HPLA. Combination of highly oriented fiber structure, differential pore size and asymmetric wettability between two layers enabled instant water transport. The resultant fabricated composite membranes offer superior properties with one-way transport capacity (R) of 1117%, overall moisture management capacity (OMMC) of 0.91, and excellent water vapor transmission rate of 11.6 kg m^-2 d^-1. The successful preparation of these fascinating directional water transport materials offers new insight into the role of fiber alignment along with differential apertures and asymmetric chemical structure for realizing membranes for quick-drying applications.

Cuttlefish-Bone-Structure-like Lamellar Porous Fiber-Based Ceramics with Enhanced Mechanical Performances

Porous fiber-based ceramics have been widely applied in various fields because of their excellent thermal insulation property and high thermal stability property. However, designing porous fibrous ceramics with enhanced comprehensive performances, such as low density, low thermal conductivity, and high mechanical properties at both room temperature and high temperature, is still a challenge and the future development trend. Hence, based on the lightweight cuttlefish bone that possesses a "wall-septa" structure with excellent mechanical performance, we design and fabricate a novel porous fibrous ceramic with the unique fiber-based dual structure of lamellas by the directional freeze-casting method and systematically investigate the effects of lamellar components on the microstructure and mechanical performances of the product. For the desired cuttlefish-bone-structure-like lamellar porous fiber-based ceramics (CLPFCs), the porous framework formed by the overlapping of transversely arranged fibers helps to reduce the density and thermal conductivity of the product, and the longitudinally arranged lamellar structure replaces traditional binders and plays an important role in improving the mechanical properties in the direction parallel to the X-Z plane. Compared with traditional porous fibrous materials reported in the literature, the CLPFCs with an Al₂O₃/SiO₂ molar ratio of 1:2 in the lamellar component exhibits prominent comprehensive performances, such as low density, excellent thermal insulation property, and outstanding mechanical performances at both room temperature and high temperature (3.46 MPa at 1300 °C), indicating that the CLPFCs are a promising candidate for applications in high-temperature thermal insulation systems.

Facile Preparation of PET/PA6 Bicomponent Microfilament Fabrics with Tunable Porosity for Comfortable Medical Protective Clothing

Medical protective materials have broadly drawn attention due to their ability to stop the spread of infectious diseases and protect the safety of medical staff. However, creating medical protective materials that combine excellent liquid shielding performance and outstanding mechanical properties with high breathability is still a challenging task. Herein, a polyester/polyamide 6 (PET/PA6) bicomponent microfilament fabric with tunable porosity for comfortable medical protective clothing was prepared via dip-coating technology and an easy and effective thermal-belt bonding process. The dip coating of the C₆-based fluorocarbon polymer endowed the samples with excellent hydrophobicity (alcohol contact angles, 130-128°); meanwhile, by adjusting the temperature and pressure of the thermal-belt bonding process, the porosity of the samples was adapted in the range of 64.19-88.64%. Furthermore, benefitting tunable porosity and surface hydrophobicity, the samples also demonstrated an excellent softness score (24.3-34.5), agreeable air permeability (46.3-27.8 mm/s), and high hydrostatic pressure (1176-4130 Pa). Significantly, the created textiles successfully filter aerosol from the air and display highly tensile strength. These excellent comprehensive performances indicate that the prepared PET/PA6 bicomponent microfilament fabrics would be an attractive choice for medical protective apparel.