Modulating Carrier Transfer over Carbazolic Conjugated Microporous Polymers via Donor Structural Design for Functionalization of Thiophenols

Confined synthesis of conjugated microporous polymers for selective photocatalytic oxidation of amines

Photocatalytic oxidative coupling of amines is considered a mild, efficient, and sustainable strategy for the synthesis of imines. As a versatile organic semiconductor, conjugated microporous polymers (CMPs) are attractive in photocatalysis areas due to the diversity of their polymeric monomers. Herein, we report that in addition to the design of monomers, size-confined polymerization is also a feasible strategy to modulate the structure and photocatalysis properties of CMPs. We adopted dibromopyrazine as polymeric units to prepare pyrazine-involved hollow spherical CMPs (H-PyB) using a template method and successfully performed size-confined polymerization of hollow samples by resizing the templates. Interestingly, the small confinement space induced the formation of CMPs with better conjugate extensibility, resulting in enhanced conductivity, narrowed bandgaps, improved photoelectric performance, etc. As a result, small-sized H-PyB CMPs had superior activity for the photocatalytic oxidation of amines. Particularly, the smallest H-PyB CMPs that we designed in the present work exhibited excellent performance for the photocatalytic coupling oxidation of amines. When using benzylamine as a model substrate, the yield of the corresponding imine reached ∼ 113 mmol·g-1·h-1, accompanied by almost 100 % selectivity. Furthermore, the as-designed confined samples exhibited stable photocatalytic activity as well as good applicability for oxidative coupling of different amines. This work not merely reports a kind of CMP photocatalysts with excellent performance for the imine coupling oxidation but also proposes an alternative strategy for constructing high-performance organic photocatalysts by size-confined synthesis.

Visible light to the second near-infrared light-harvesting donor-acceptor1-donor-acceptor2-type terpolymers for boosted photocatalytic hydrogen evolution via dual-sulfone-acceptor engineering

Developing visible to near-infrared light-absorbing conjugated polymer photocatalysts is crucial for enhancing solar energy utilization efficiency, as most conjugated organic polymers only absorb light in the visible range. In this work, we firstly developed a novel thiophene S,S-dioxide (TDO) monomer with the stronger electron-withdrawing character, and then prepared a series of donor-acceptor1-donor-acceptor2-type (D-A1-D-A2-type) conjugated terpolymers (THTDB-1-THTDB-5) by statistically adjusting the molar ratio of two sulfone-based acceptor monomers, dibenzothiophene-S,S-dioxide (BTDO, A1) and TDO (A2). These terpolymers demonstrate a gradually expanding absorption range from visible light to the second near-infrared (Vis-to-NIR-II) region with the gradual increase of the TDO contents in the polymer skeleton, showcasing excellent absorption properties and efficient light-capturing capabilities. The optimized D-A1-D-A2 polymer photocatalyst THTDB-4 exhibits a high hydrogen evolution rate of 21.27 mmol g-1 h-1 under visible light without any co-catalyst. The dual-sulfone-acceptor engineering offers a viable approach for developing efficient the longer Vis-to-NIR-II light-harvesting polymer photocatalysts.

Sulfur vacancy and p-n junction synergistically boosting interfacial charge transfer and separation in ZnIn2S4/NiWO4 heterostructure for enhanced photocatalytic hydrogen evolution

Constructing a p-n heterojunction with vacancy is advantageous for speeding up carrier separation and migration due to the synergy of the built-in electric field and electron capture of the vacancy. Herein, a sulfur vacancy riched-ZnIn₂S₄/NiWO₄ p-n heterojunction (VZIS/NWO) photocatalyst was rationally designed and fabricated for photocatalytic hydrogen evolution. The composition and structure of VZIS/NWO were characterized. The existence of sulfur vacancy was confirmed through X-ray photoelectron spectroscopy, high-resolution transmission electron microscope, and electron paramagnetic resonance technology. The p-n heterojunction formed by ZnIn₂S₄ and NiWO₄ was proved to provide a convenient channel to boost interfacial charge migration and separation. By reducing the band gap, the vacancy engineer can improve light absorption as well as serve as an electron trap to improve photo-induced electron-hole separation. Benefiting from the synergy of p-n heterojunction and vacancy, the optimal VZIS/NWO-5 catalyst exhibits dramatically enhanced H₂ generation performance, which is about 10-fold that of the pristine ZnIn₂S₄. This work emphasizes the synergy between p-n heterojunction and sulfur vacancy for enhancing photocatalytic hydrogen evolution performance.

Novel Carbazole-Based Porous Organic Polymer for Efficient Iodine Capture and Rhodamine B Adsorption

A new porous organic polymer (CTF-CAR), which takes carbazole as the electron-rich center unit and thiophenes as the auxiliary group, has been synthesized through catalyst-free Schiff-base polymerization. At the same time, the structure, thermal stability, morphology, and other basic properties of the polymer were analyzed by IR, NMR, TGA, and SEM. Then, CTF-CAR was applied to iodine capture and rhodamine B adsorption. Due to its strong electron donor ability and abundant heteroatom binding sites, which have a positive effect on the interaction between the polymer network and adsorbates, CTF-CAR exhibits high uptake capacities for iodine vapor and rhodamine B as 2.86 g g-1 and 199.7 mg g-1, respectively. The recyclability test also confirmed that it has good reusability. We found that this low-cost and catalyst-free synthetic porous organic polymer has great potential for the treatment of polluted water and iodine capture.

Dual Molecular Oxygen Activation Sites on Conjugated Microporous Polymers for Enhanced Photocatalytic Formation of Benzothiazoles

Oxidative formation of high value compounds involving active oxygen species using heterogeneous polymeric photocatalysts has become a useful tool in catalysis. Controlling the interaction between the active sites on polymer photocatalysts and oxygen molecules is still challenging due to the rather large polymer backbone structure. Here, we design a triazine-containing donor acceptor-type conjugated microporous polymer (CMP) containing dual major active sites at F and N atoms for molecular oxygen activation. Introducing fluorine atoms on the CMP backbone led to a combined effect of enhanced adsorption and electron transfer of oxygen. Time-resolved photoluminescence, electronic paramagnetic resonance spectra, and DFT calculation revealed favorable absorption energy and electron transfer kinetics between the CMP and oxygen molecules, thus efficiently generating superoxide radicals (O₂^•-) and singlet oxygen (¹O₂) as main active oxygen species. The photocatalytic activity, selectivity, and reusability of the CMP was demonstrated by the photocatalytic formation of a variety of benzothiazoles.

Nitrogen-rich based conjugated microporous polymers for highly efficient adsorption and removal of COVID-19 antiviral drug chloroquine phosphate from environmental waters

Chloroquine phosphate (CQP) has been suggested as an important and effective clinical reliever medication for the 2019 coronavirus (COVID-19). Nevertheless, its excessive use will inevitably cause irreparable damage to the entire ecosystem, thereby posing a considerable environmental safety concern. Hence, the development of highly-efficient methods of removing CQP from water pollution sources, e.g., effluents from hospitals and pharmaceutical factories is significant. This study reported the fabrication of novel C—N bond linked conjugated microporous polymers (CMPs) (BPT–DMB–CMP) with multiple nitrogen-rich anchoring sites for the quick and efficient removal of CQP from aqueous solutions. The irreversible covalent C—N bond linked in the internal framework of BPT–DMB–CMP endowed it with good chemical stability and excellent adsorbent regeneration. With its predesigned functional groups (i.e., rich N—H bonds, triazine rings, and benzene rings) and large area surface (1,019.89 m²·g⁻¹), BPT–DMB–CMP demonstrated rapid adsorption kinetics (25 min) and an extraordinary adsorption capacity (334.70 mg·g⁻¹) for CQP, which is relatively higher than that of other adsorbents. The adsorption behavior of CQP on BPT–DMB–CMP corresponded with Liu model and mixed-order model. Based on the density functional theory (DFT) calculations, X-ray photoelectron spectroscopy (XPS), and adsorption comparisons test, the halogen bonding, and hydrogen bonding cooperates with π − π, C — H···π interactions and size-matching effect in the CQP adsorption system on BPT–DMB–CMP. The excellent practicability for the removal of CQP from real wastewater samples verified the prospect of practical application of BPT–DMB–CMP. BPT–DMB–CMP exhibited the application potentials for the adsorption of other antiviral drugs. This work opens up an efficient, simple, and high adsorption capacity way for removal CQP.

Frustrations of supported catalytic clusters under operando conditions predicted by a simple lattice model

The energy landscape with a number of close minima separated by low barriers is a well-known issue in computational heterogeneous catalysis. In the framework of the emerging out-of-equilibrium material science, the navigation through such involved landscapes is associated with the functionality of materials. Current advancements in the cluster catalysis has brought and continues to bring essential nuances to the topic. One of them is the possibility of frustration of the catalytic centre under operando conditions. However, this conjecture is difficult to check either experimentally or theoretically. As a step in this direction, as-simple-as-possible lattice model is used to estimate how the supposed frustrations may couple with the elementary reaction and manifest themselves at the macroscopic scale.

Construction of Ultrastable Conjugated Microporous Polymers Containing Thiophene and Fluorene for Metal Ion Sensing and Energy Storage

In this study, we have used the one-pot polycondensation method to prepare novel 2D conjugated microporous polymers (Th-F-CMP) containing thiophene (Th) and fluorene (Fl) moieties through the Suzuki cross-coupling reaction. The thermogravimetric analysis (TGA) data revealed that Th-F-CMP (T_d10 = 418 °C, char yield: 53 wt%). Based on BET analyses, the Th-F-CMP sample displayed a BET specific surface area of 30 m² g^-1, and the pore size was 2.61 nm. Next, to show the effectiveness of our study, we utilized Th-F-CMP as a fluorescence probe for the selective detection of Fe³⁺ ions at neutral pH with a linear range from 2.0 to 25.0 nM (R² = 0.9349). Furthermore, the electrochemical experimental studies showed that the Th-F-CMP framework had a superior specific capacity of 84.7 F g^-1 at a current density of 0.5 A g^-1 and outstanding capacitance retention (88%) over 2000 cycles.

Enhancing Built-in Electric Field via Molecular Dipole Control in Conjugated Microporous Polymers for Boosting Charge Separation

The built-in electric field (BEF) has been considered as the key kinetic factor for facilitating efficient photoinduced carrier separation and migration of polymeric photocatalysts. Enhancing the BEF of the polymers could enable a directional migration of the photogenerated carriers to accelerate photogenerated charge separation and thus boost photocatalytic performances. However, achieving this approach remains a formidable challenge, which has never been realized in conjugated microporous polymers (CMPs). Herein, we developed a molecular dipole control strategy to modulate the BEF in CMPs by varying the nature of the core. As a result, a series of CMPs with a tunable BEF were designed and prepared via FeCl₃-mediated coupling of bicarbazole with different acceptor cores. The optimized CbzCMP-9 featured the strongest BEF induced by its high molecular dipole, which grants it with a powerful driving force to accelerate exciton dissociation into electron-hole pairs and facilitates charge transfer along the backbone of CMPs to the surface, resulting in a remarkable photocatalytic performance toward thiocyano chromones and C-3 thiocyanation of indoles (up to 95 and 98% yields, respectively) and prominently surpassing many other reported photocatalysts. In brief, the proposed strategy highlights that enhancing the BEF by modulating molecular dipole can lead to a dramatic improvement in photocatalytic performance, which is expected to be employed for constructing other photocatalytic systems with high performance.

Unveiling the Synthetic Potential of 1,3,5-Tri(10H-phenothiazin-10-yl)benzene-Based Optoelectronic Material: A Metal-Free and Recyclable Photocatalyst for Sequential Functionalization of C(sp2)-H Bonds

1,3,5-Tri(10H-phenothiazin-10-yl)benzene (3PTZ) is endowed with unique redox and photoresponsive characteristics and has been utilized as a p-type redox center for organic battery cathode material and a room-temperature phosphorescence (RTP) material, respectively. Conversely, its exploration in other research fields, particularly organic synthesis, remains unknown. Here, we demonstrate that 3PTZ-POP synthesized via cross-linking of 3PTZ is capable of harvesting visible-light photons and selectively converting solar energy to chemical energy. Specifically, 3PTZ-POP functions as a metal-free and recyclable photocatalyst to promote the sequential C(sp²)-H functionalizations of N-arylacrylamides with readily available trifluoromethylsulfonyl chloride as the radical precursor. An array of 3,3-disubstituted 2-oxindoles bearing a pharmaceutically important CF₃ moiety are delivered in moderate to excellent yields under mild and sustainable conditions.

Triazine-based two dimensional porous materials for visible light-mediated oxidation of sulfides to sulfoxides with O2

Recently, triazine-based two dimensional (2D) porous materials have received increasing attention in photocatalysis. Herein, CTF-1, a covalent triazine framework, was adopted as the blueprint for designing a 2D bespoke photocatalyst. The thiazolo[5,4-d]thiazole (TzTz) linkage was inserted into the framework of CTF-1, affording TzTz-TA, which belongs to conjugated microporous polymers (CMPs). Rather than the direct insertion via the challenging CH activation, TzTz-TA was assembled from 2,4,6-tris(4-formylphenyl)-1,3,5-triazine and dithiooxamide, in which TzTz was formed in situ by a process of catalyst-free solvothermal condensation. Both CTF-1 and TzTz-TA had similar energy gaps (E_g), photocurrents, and charge carrier lifetimes, in line with the similar molecular underpinnings. However, the reduction potential of TzTz-TA is less negative than that of CTF-1 due to the insertion of TzTz linkage, in a more appropriate position for activating O₂ to superoxide (O₂^•-). In return, blue light-mediated oxidation of sulfides to sulfoxides with O₂ over TzTz-TA was accomplished with significantly superior conversions to those over CTF-1. Intriguingly, extensive sulfides could be oxidized to corresponding sulfoxides with outstanding recycling stability of TzTz-TA. Notably, attendance of an induction period was observed during TzTz-TA photocatalysis. This work highlights the vast potential of designing triazine-based porous materials to meet the tailor-made demands, such as the oxidative transformation of organic molecules with O₂.

Facile Synthesis of Microporous Ferrocenyl Polymers Photocatalyst for Degradation of Cationic Dye

Microporous organic polymers (MOPs) were prepared by condensation reactions from substituent-group-free carbazole and pyrrole with 1,1′-ferrocenedicarboxaldehyde without adding any catalysts. The resultant MOPs were insoluble in common solvent and characterized by FTIR, XPS, TGA and SEM. An N₂ adsorption test showed that the obtained polymers PFcMOP and CFcMOP exhibited Brunauer–Emmett–Teller (BET) surface areas of 48 and 105 m² g⁻¹, respectively, and both polymers possessed abundant micropores. The MOPs with a nitrogen and ferrocene unit could be potentially applied in degrading dye with high efficiency.

Boosting charge separation in conjugated microporous polymers via fluorination for enhancing photocatalysis

Conjugated microporous polymers (CMPs) have emerged as prospective heterogeneous photocatalysts for photocatalytic aerobic oxidation due to their ease of functionalization, high surface area and porosity, and tunable band gap.

Facile metal-free synthesis of pyrrolo[3,2-b]pyrrolyl-based conjugated microporous polymers for high-performance photocatalytic degradation of organic pollutants

An efficient and metal-free approach to the synthesis of new kinds of CMPs (pyrrolo[3,2-b]pyrrolyl-based CMPs) on a gram scale within a short time has been developed for remarkable adsorbent and photocatalytic degradation of organic pollutants.