Hydrolysis of Ammonia Borane on a Single Pt Atom Supported by N-Doped Graphene

Self-Propelled Tubular Micromotors Powered by Hydrogen Bubbles under Mild Conditions: A Major Step toward Biological Applications with Live Cells

Polymer-based tubular micromotors, featuring an inner layer of Pt nanoparticles (PtNPs), exhibit vigorous propulsion by emitting H2 bubbles in an aqueous ammonia borane (NH3BH3) solution. The hydrolysis of NH3BH3 on the PtNPs facilitates the continuous release of H2 gas from the open-end terminus, driving its forward movement. Unlike conventional O2 bubbles' systems that rely on hydrogen peroxide (H2O2) as fuel, these micromotors can operate in the presence of live cells within the NH3BH3 medium. Consequently, micromotors functionalized with the lectin concanavalin A demonstrate the capability to capture and release Escherichia coli (E. coli) without inducing cell death. Remaining bacteria can be detected by using standard culture techniques. Conversely, micromotors coated with TiO2 nanoparticles enable photosterilization of E. coli without fuel-induced damage. The self-stirring motion of the tubes enhances both bacterial capture and sterilization efficiency. These advancements obviate the necessity for H2O2 as a fuel source, and pave the way for the applications of micromotors in biological contexts.

Metal and Coordinating Atoms Synergistically Achieve High Activity and Stability in Single-Atom Catalysts within the Framework of TM-N3X for the Oxygen Evolution Reaction of Lithium Peroxide

A critical challenge in the advancement of lithium-oxygen batteries (LOBs) is the difficulty in decomposing lithium peroxide, leading to high charge overpotentials and poor cycling stability. Single-atom catalysts (SACs), known for their ultrahigh catalytic activity in various electrochemical reactions, are expected to enhance the kinetics of the oxygen evolution reaction (OER) for LOBs. Herein, 24 SACs within the framework of TM-N3X have been designed and optimized for the OER of lithium peroxide. First-principles calculations reveal that the doped non-metal atom (X = B, C, O, or P) significantly contributes to the structural stability of the SACs while the metal atom (TM = Ru, Os, Rh, Ir, Pd, or Pt) significantly influences the catalytic activity of the SACs. Upon evaluation of their stability and catalytic activity, the Pt-N3B and Pd-N3B catalysts have been identified as promising candidates for the OER of lithium peroxide, with theoretical charge overpotentials of 0.19 and 0.18 V, respectively. This work provides new guidance for the design of efficient SACs for LOBs and inspires a fundamental understanding of the underlying structure-activity relationship.

Boron/nitrogen-trapping and regulative electronic states around Ru nanoparticles towards bifunctional hydrogen production

Developing a straightforward and general strategy to regulate the surface microenvironment of a carbon matrix enriched with N/B motifs for efficient atomic utilization and electronic state of metal sites in bifunctional hydrogen production via ammonia-borane hydrolysis (ABH) and water electrolysis is a persistent challenge. Herein, we present a simple, green, and universal approach to fabricate B/N co-doped porous carbons using ammonia-borane (AB) as a triple functional agent, eliminating the need for hazardous and explosive functional agents and complicated procedures. The pyrolysis of AB induces the regulation of the surface microenvironment of the carbon matrix, leading to the formation of abundant surface functional groups, defects, and pore structures. This regulation enhances the efficiency of atom utilization and the electronic state of the active component, resulting in improved bifunctional hydrogen evolution. Among the catalysts, B/N co-doped vulcan carbon (Ru/BNC) with 2.1 wt% Ru loading demonstrates the highest performance in catalytic hydrogen production from ABH, achieving an ultrahigh turnover frequency of 1854 min-1 (depending on the dispersion of Ru). Furthermore, this catalyst shows remarkable electrochemical activity for hydrogen evolution in alkaline water electrolysis with a low overpotential of 31 mV at 10 mA cm-2. The present study provides a simple, green, and universal method to regulate the surface microenvironment of various carbons with B/N modulators, thereby adjusting the atomic utilization and electronic state of active metals for enhanced bifunctional hydrogen evolution.

V-doped activated Ru/Ti2.5V0.5C2 dual-active center accelerate hydrogen production from ammonia borane

Designing and constructing the active center of Ru-based catalysts is the key to efficient hydrolysis of ammonia borane (NH3BH3, AB) for hydrogen production. Herein, V-doped Ru/Ti2.5V0.5C2 dual-active center catalysts were synthesized, showing excellent catalytic ability for AB hydrolysis. The corresponding turnover frequency value was 1072 min-1 at 298 K, and the hydrolysis rate rB of AB was 235 × 103 mL·min-1·gRu-1. X-ray photoelectron spectroscopy results indicated that the interaction between V-doped Ti3C2 and catalytic metal Ru transfers electrons from Ti to Ru, resulting in electron-rich Ru species. According to density functional theory calculations, the activation energy and reaction dissociation energy of the reactants AB and H2O on V-doped catalysts were lower than those of Ru/Ti3C2, thus optimizing the catalytic kinetics of AB hydrolysis. The modification strategy of V-doped Ti3C2 provides a new pathway for the development of high-performance catalysts for AB hydrolysis.

Bottom-Up Synthesis of Platinum Dual-Atom Catalysts on Cerium Oxide

We present here the synthesis and performance of dual-atom catalysts (DACs), analogous to well-known single-atom catalysts (SACs). DACs feature sites containing pairs of metal atoms and can outperform SACs due to their additional binding possibilities. Yet quantifying the improved catalytic activity in terms of proximity effects remains difficult, as it requires both high-resolution kinetic data and an understanding of the reaction pathways. Here, we use an automated bubble counter setup for comparing the catalytic performance of ceria-supported platinum SACs and DACs in ammonia borane hydrolysis. The catalysts were synthesized by wet impregnation and characterized using SEM, HAADF-STEM, XRD, XPS, and CO-DRIFTS. High-precision kinetic studies of ammonia borane hydrolysis in the presence of SACs show two temperature-dependent regions, with a transition point at 43 °C. Conversely, the DACs show only one regime. We show that this is because DACs preorganize both ammonia borane and water at the dual-atom active site. The additional proximal Pt atom improves the reaction rate 3-fold and enables faster reactions at lower temperatures. We suggest that the DACs enable the activation of the water-O-H bond as well as increase the hydrogen spillover effect due to the adjacent Pt site. Interestingly, using ammonia borane hydrolysis as a benchmark reaction gives further insight into hydrogen spillover mechanisms, above what is known from the CO oxidation studies.

Electronegativity-dependent Pt anchoring and molecule adsorption for graphene-based supported Pt single atom

CONTEXT

To unravel the effects of the C vacancy, doping N type and number, the adsorption of HCHO and O2 was investigated on the graphene (Gr)-based supported Pt single atom by density functional theory calculations. The electronegativity of the vacancy and N-doped Gr was a crucial factor both for the anchoring for a Pt and the further adsorption of HCHO and O2 on the supported Pt. The electronegativity can be tuned by the C vacancy number (1V and 2V), the doping N type (graphitic-N, pyridinic-N and pyrrolic-N) and the doping pyridinic-N number (1N ~ 4N). The high electronegativity of the vacancy and N-doped Gr favored the anchoring for a Pt compared to the Gr, while too high electronegativity was detrimental for further adsorption of adsorbates on the supported Pt. The Bader charge analysis proved that the electronegativity followed the trend as pyrrolic-N > pyridinic-N > graphitic-N, and 4N-Gr > 2V-Gr > 3N-Gr > 2N-Gr > 1N-Gr > 1V-Gr > Gr. As a result, the pyridinic-N, the 1V-Gr, 1N-Gr and 2N-Gr with the suitable electronegativity achieved both stronger anchoring for a Pt and more favorable adsorption of HCHO and O2 on the supported Pt than the pristine Gr support.

METHODS

Periodic DFT calculation was performed using the VASP code. The PAW method and the GGA-PBE functionals were used. Part of work was also carried out by the DSPAW procedure of Device Studio.

Exploring Enhanced Hydrolytic Dehydrogenation of Ammonia Borane with Porous Graphene-Supported Platinum Catalysts

Graphene is a good support for immobilizing catalysts, due to its large theoretical specific surface area and high electric conductivity. Solid chemical converted graphene, in a form with multiple layers, decreases the practical specific surface area. Building pores in graphene can increase specific surface area and provide anchor sites for catalysts. In this study, we have prepared porous graphene (PG) via the process of equilibrium precipitation followed by carbothermal reduction of ZnO. During the equilibrium precipitation process, hydrolyzed N,N-dimethylformamide sluggishly generates hydroxyl groups which transform Zn2+ into amorphous ZnO nanodots anchored on reduced graphene oxide. After carbothermal reduction of zinc oxide, micropores are formed in PG. When the Zn2+ feeding amount is 0.12 mmol, the average size of the Pt nanoparticles on PG in the catalyst is 7.25 nm. The resulting Pt/PG exhibited the highest turnover frequency of 511.6 min-1 for ammonia borane hydrolysis, which is 2.43 times that for Pt on graphene without the addition of Zn2+. Therefore, PG treated via equilibrium precipitation and subsequent carbothermal reduction can serve as an effective support for the catalytic hydrolysis of ammonia borane.

Exploring the Enhanced Catalytic Activity of Pt Nanoparticles Generated on the Red Phosphorus/Graphitic Carbon Nitride Binary Heterojunctions in the Photo-assisted Hydrolysis of Ammonia Borane

Ammonia borane (AB) holds great promise for chemical hydrogen storage, but its slow dehydrogenation kinetics under ambient conditions requires a suitable catalyst to facilitate hydrogen production from AB. Here, we fabricated binary red phosphorus/graphitic carbon nitride (RP/g-CN) heterojunctions decorated with Pt nanoparticles (NPs, denoted Pt/RP/g-CN) with a facile ultrasound-assisted two-step protocol as a photo-assisted catalyst for the hydrolysis of AB (HAB). The heterojunction established through intimate P-O-N bonds was proven to have improved photophysical properties such as a lower electron-hole recombination and enhanced visible light utilization compared to the pristine components. With the incorporation of Pt NPs, the optical properties of RP/g-CN heterojunctions were further improved through Schottky junction formation between semiconductors and Pt NPs, enabling a superb hydrogen gas (H2) generation rate of 142 mol H2·mol Pt-1·min-1 under visible light irradiation. Even though g-CN is a well-known host material for many metal NPs, here we discovered that the interaction of Pt NPs with RP in the ternary heterojunction structure is more favorable than that of g-CN, stressing the key role of RP as a support material in the designed ternary heterostructure. The band alignment of the ternary heterojunction catalyst along with the flow of charge carriers was also studied and shown to be a type-II heterojunction structure without hole migration, namely, a complex type-II heterojunction. Several scavenger experiments were also conducted to explain the mechanism of the photo-assisted HAB. To the best of our knowledge, this is the first example of a dual mechanism proposed for the visible light-assisted HAB. While the majority of the H2 was believed to be produced on the Pt NPs surface with the traditional B-N bond dissociation mechanism, the strong oxidizing action of OH• radicals formed by the heterojunction photocatalyst was also speculated to account for the 33% increase in the activity upon visible light irradiation through another mechanism.

Examining O[Formula: see text] adsorption on pristine and defective popgraphene sheets: A DFT study

CONTEXT

Popgraphene (PopG) is a two-dimensional carbon-based material with fused pentagonal and octagonal rings. Like graphene, it exhibits a metallic band gap and exceptional thermal, dynamic, and mechanical stability. Here, we theoretically study the electronic and structural properties of PopG monolayers, including their doped and vacancy-endowed versions, as O[Formula: see text] adsorbers. Our findings show that pristine and vacancy-endowed PopG sheets have a comparable ability to adsorb O[Formula: see text] molecules, with adsorption energies ranging from [Formula: see text]0.57 to [Formula: see text]0.59 eV (physisorption). In these cases, octagonal rings play a dominant role in the adsorption mechanism. Platinum and Silicon doping enhance the O[Formula: see text] adsorption in areas close to the octagonal rings, resulting in adsorption energies ranging from [Formula: see text]1.13 to [Formula: see text]2.56 eV (chemisorption). Furthermore, we computed the recovery time for the adsorbed O[Formula: see text] molecules. The results suggest that PopG/O[Formula: see text] interaction in pristine and vacancy-endowed cases can change the PopG electronic properties before O[Formula: see text] diffusion.

METHODS

Density Functional Theory (DFT) simulations, with Van der Waals corrections (DFT-D, within the Grimme scheme), were performed to study the structural and electronic properties of PopG/O[Formula: see text] systems using the DMol3 code within the Biovia Materials Studio software. The exchange and correlation functions are treated within the generalized gradient approximation (GGA) as parameterized by Perdew-Burke-Ernzerhof (PBE) functional. We used the double-zeta plus polarization (DZP) for the basis set in these cases. We also considered the BSSE correction through the counterpoise method and the nuclei-valence electron interactions by including semi-core DFT pseudopotentials.

Synergetic effect of Au nanoparticles and transition metal phosphides for enhanced hydrogen evolution from ammonia-borane

The hydrogen evolution from ammonia borane is intriguing but challenging due to its sluggish kinetics. In this regard, the gold nanoparticles amalgamation with metal phosphides is speculated to be more efficient catalysts. Here, the catalysts Au/Ni₂P and Au/CoP with the high synergetic effect of Au nanoparticles and metal phosphides were synthesized for ammonia borane hydrolysis. The activity of Au/Ni₂P increases 4.8-fold (i.e., 0.08 to 0.40 L∙h^-1) compared to pristine Ni₂P, and the activity of Au/CoP increases 1.7-fold (i.e., 0.74 to 1.27 L∙h^-1) compared to pristine CoP. This reveals that the synergetic effect of Au^δ+ and (Ni₂P) ^δ- is stronger than Au^δ+ and (CoP) ^δ- which is manifested by XPS analysis. The kinetics exposes that the activation energy of Au/Ni₂P (45.28 kJ∙mole^-1) is greater than Au/CoP (31.45 kJ∙mole^-1) and the TOF of Au/Ni₂P is less than Au/CoP. This research work presents an effective approach for producing active sites of Au^δ+ and (Ni₂P & CoP) ^δ- for ammonia borane hydrolysis to enhance the H₂ evolution rate.

Recent Advances and Perspectives on Supported Catalysts for Heterogeneous Hydrogen Production from Ammonia Borane

Ammonia borane (AB), a liquid hydrogen storage material, has attracted increasing attention for hydrogen utilization because of its high hydrogen content. However, the slow kinetics of AB hydrolysis and the indefinite catalytic mechanism remain significant problems for its large-scale practical application. Thus, the development of efficient AB hydrolysis catalysts and the determination of their catalytic mechanisms are significant and urgent. A summary of the preparation process and structural characteristics of various supported catalysts is presented in this paper, including graphite, metal-organic frameworks (MOFs), metal oxides, carbon nitride (CN), molybdenum carbide (MoC), carbon nanotubes (CNTs), boron nitride (h-BN), zeolites, carbon dots (CDs), and metal carbide and nitride (MXene). In addition, the relationship between the electronic structure and catalytic performance is discussed to ascertain the actual active sites in the catalytic process. The mechanism of AB hydrolysis catalysis is systematically discussed, and possible catalytic paths are summarized to provide theoretical considerations for the designing of efficient AB hydrolysis catalysts. Furthermore, three methods for stimulating AB from dehydrogenation by-products and the design of possible hydrogen product-regeneration systems are summarized. Finally, the remaining challenges and future research directions for the effective development of AB catalysts are discussed.