Highly Efficient and Durable Electrocatalysis by a Molecular Catalyst with Long Alkoxyl Chains Immobilized on a Carbon Electrode for Water Oxidation

Fe-induced crystalline-amorphous interface engineering of a NiMo-based heterostructure for enhanced water oxidation

Engineering heterostructures with a unique surface/interface structure is one of the effective strategies to develop highly active noble-metal-free catalysts for the oxygen evolution reaction (OER), because the surface/interface of catalysts is the main site for the OER. Herein, we design a coralloid NiMo(Fe)-20 catalyst with a crystalline-amorphous interface through combining a hydrothermal method and an Fe-induced surface reconfiguration strategy. That is, after Fe3+ impregnation treatment, the Ni(OH)2-NiMoO4 pre-catalyst with a complete crystalline surface is restructured into a trimetallic heterostructure with a crystalline-amorphous interface, which facilitates mass diffusion and charge transfer during the OER. As expected, self-supported NiMo(Fe)-20 exhibits excellent electrocatalytic water oxidation performance (overpotential: η-10 = 220 mV, η-100 = 239 mV) in the alkaline electrolyte, and its electrocatalytic performance hardly changes after maintaining the current density of 50 mA cm-2 for 10 hours. Furthermore, nickel foam (NF) supported commercial Pt/C and self-supported NiMo(Fe)-20 served as the cathode and anode of the Pt/C‖NiMo(Fe)-20 electrolyzer, respectively, which exhibits a lower cell voltage (E-100 = 1.53 V) than that of the Pt/C‖RuO2 electrolyzer (E-100 = 1.58 V) assembled with noble metal-based catalysts. The enhanced electrocatalytic performance of the NiMo(Fe)-20 catalyst is mainly attributed to the synergistic effect between the crystalline-amorphous interface and the coralloid trimetallic heterostructure.

A layered CoSeO3 pre-catalyst for electrocatalytic water oxidation

In electrocatalytic water oxidation, the surface reconstruction of electrocatalysts is a common issue due to the applied anodic potential. The study of the fundamentals of catalyst structure transformation and the relationship between structure and performance is important. Herein, we designed two cobalt selenites (CoSeO3 and CoSeO3·2H2O) with different structures for comparative studies. The cross channels in layered CoSeO3 provide space for easy surface reconstruction. The reasons are defined by a series of electrochemical studies, indicating a larger ion diffusion coefficient, more surface contacting OH- anions and faster charge transfer kinetics in CoSeO3. This work provided a paradigm for studying the influence of geometric structure on pre-catalyst reconstruction.

Configurationally Nonselective Aquation of a Mononuclear Ru(II) Chloro Complex to Aquo Complex Isomers with Distinctive Aspects in Photoisomerization, Redox, and Catalytic Water Oxidation

distal-[Ru(EtOtpy)(pynp)Cl]+ (d-EtO1Cl) (EtOtpy = 4'-ethoxy-2,2':6',2″-terpyridine, pynp = 2-(2-pyridyl)-1,8-naphthyridine), and distal/proximal-[Ru(EtOtpy)(pynp)OH2]2+ (d/p-EtO1H2O) complexes were newly synthesized to investigate the synergistic influence of the geometric configuration coupled with substituent introduction of an ethoxy (EtO) group on the physicochemical properties and reactions of the Ru(II) complexes. Configurationally nonselective aquation of d-EtO1Cl was uniquely observed to form d/p-EtO1H2O isomers in water, in contrast to configurationally selective aquation of distal-[Ru(tpy)(pynp)Cl]+ (d-1Cl, tpy = 2,2':6',2″-terpyridine) without the EtO group [Yamazaki, H. . J. Am. Chem. Soc. 2011, 133, 8846-8849].The kinetic profiles of the aquation reactions of d-EtO1Cl were well analyzed using a sequential reversible reaction model assuming the reversible interconversion between d/p-EtO1H2O isomers via d-EtO1Cl. The observed equilibrium constant (Kiso) of isomerization between p/d-EtO1H2O was calculated from the kinetic analysis as Kiso = 0.45, which is consistent with the final concentration ratio (1:0.43) of p/d-EtO1H2O generated in the aquation reaction of d-EtO1Cl. The irreversible photoisomerization from d-EtO1H2O to p-EtO1H2O was observed in water with an internal quantum yield (Φ) of 0.44% at 520 nm. Electrochemical measurements showed that d-EtO1H2O undergoes a 2-step oxidation reaction of 1H+-coupled 1e- processes of RuII-OH2/RuIII-OH and RuIII-OH/RuIV═O at pH 1.3-9.7, whereas p-EtO1H2O undergoes a 1-step oxidation reaction of a 2H+-coupled 2e- process of RuII-OH2/RuIV═O in the pH range of 1.8-11.5. Any redox potential of d/p-EtO1H2O isomers was decreased by the electro-donating EtO substitution, compared with distal/proximal-[Ru(tpy)(pynp)OH2]2+ (d/p-1H2O). The turnover frequency (kO2 = 1.7 × 10-2 s-1) of d-EtO1H2O for water oxidation catalysis is higher than that (3.5 × 10-4 s-1) of p-EtO1H2O by a factor of 48.6. The kO2 value (1.7 × 10-2 s-1) for d-EtO1H2O is 4.5-fold higher than those of d-1H2O (3.8 × 10-3 s-1). The higher kO2 value of d-EtO1H2O compared with d-1H2O could be explained by the fast oxidation rate from RuIV═O to RuV═O involved in the rate-determining step due to the electron-donating EtO group.