Tuning the Electrolyte Solvation Structure via a Nonaqueous Co-Solvent to Enable High-Voltage Aqueous Lithium-Ion Batteries

Synthesis of Trisiloxane with the Dioxaborolane Group as a Cathode Film-Forming Electrolyte Additive for High-Temperature LiMn2O4/Li4Ti5O12 Batteries

LiMn2O4 batteries have been widely applied as various portable electronic devices and electric vehicles owing to the merits of low cost, high operating voltage, excellent rate capability, and environmental friendliness. However, the poor performance at elevated temperatures remains a serious technical challenge in terms of commercial application purposes. A borate-containing trisiloxane compound of TSMBO is designed and synthesized as a cathode film-forming electrolyte additive to improve the electrochemical performances of LiMn2O4/Li4Ti5O12 batteries, especially at high temperatures of 55 °C. Atomic force microscopy measurement confirms that the trisiloxane moiety in TSMBO can construct a cathode electrolyte interface (CEI) with higher mechanical strength and better flatness compared to the disiloxane moiety in the TSMBO analogue with a similar chemical structure. The robust CEI film on the surface of the LiMn2O4 cathode and the inhibited hydrolysis of LiPF6 in the electrolyte significantly suppress the dissolution of Mn from the LiMn2O4 cathode and maintain the structural integrity of the LiMn2O4 lattice over cycling. Thus, the LiMn2O4/Li4Ti5O12 coin cell using the TSMBO-containing electrolyte with an optimized addition level of 0.5 wt % exhibits a higher capacity retention of 49.3% compared with 34.3% for the baseline electrolyte after 300 cycles under 1C rate at 55 °C. The LiMn2O4/Li4Ti5O12 pouch cell tests show excellent high-temperature and cycling performance at 55 °C and a higher capacity retention of 90.4% after 500 cycles at 2C compared to 79.7% for that with the baseline electrolyte after 430 cycles at 2C. This work demonstrates that TSMBO is a promising electrolyte additive for practical use to improve the cycling stability of LiMn2O4/Li4Ti5O12 batteries at elevated temperatures.

Lithium ion Speciation in Cyclic Solvents: Impact of Anion Charge Delocalization and Solvent Polarizability

The increasing demand for lithium batteries has triggered the search for safer and more efficient electrolytes. Insights into the atomistic description of electrolytes are critical for relating microscopic and macroscopic (physicochemical) properties. Previous studies have shown that the type of lithium salt and solvent used in the electrolyte influences its performance by dictating the speciation of the ionic components in the system. Here, we investigate the molecular origins of ion association in lithium-based electrolytes as a function of anion charge delocalization and solvent chemical identity. To this end, a family of cyano-based lithium salts in organic solvents, having a cyclic structure and containing carbonyl groups, was investigated using a combination of linear infrared spectroscopy and ab initio computations. Our results show that the formation of contact-ion pairs (CIPs) is more favorable in organic solvents containing either ester or carbonate groups and in lithium salts with an anion having low charge delocalization than in an amide/urea solvent and an anion with large charge delocalization. Ab initio computations attribute the degree of CIP formation to the energetics of the process, which is largely influenced by the chemical nature of the lithium ion solvation shell. At the molecular level, atomic charge analysis reveals that CIP formation is directly related to the ability of the solvent molecule to rearrange its electronic density upon coordination to the lithium ion. Overall, these findings emphasize the importance of local interactions in determining the nature of ion-molecule interactions and provide a molecular framework for explaining lithium ion speciation in the design of new electrolytes.

A Green Asymmetric Bicyclic Co-Solvent Molecule for High-Voltage Aqueous Lithium-Ion Batteries

Hybridizing aqueous electrolytes with organic co-solvents can effectively expand the voltage window of aqueous electrolytes while reducing salt usage, but most reported co-solvents are usually flammable and toxic, hardly achieving compatibility between safety and electrochemical performance. Here, a new non-flammable and non-toxic low-salt-concentration (1.85 m) aqueous electrolyte is reported using the green co-solvent isosorbide dimethyl ether (IDE). Owing to its unique 3D molecular structure, IDE can form a five-membered ring structure by binding the Li ion. The steric hindrance effect from IDE weakens its solvation ability, generating anion-participated solvation structures that produce a robust and uniform LiF-rich solid electrolyte interphase layer while containing elastic IDE-derived organics. Moreover, the multiple O atoms in IDE can effectively regulate the intermolecular hydrogen bonding networks, reducing H2O molecule activity and expanding the electrochemical window. Such unique solvation structures and optimized hydrogen bonding networks enabled by IDE effectively suppress electrode/electrolyte interfacial side reactions, achieving a 4.3 V voltage window. The as-developed Li4Ti5O12(LTO)||LiMn2O4(LMO) full cell delivers outstanding cycling performance over 450 cycles at 2 C. The proposed green hybrid aqueous electrolyte provides a new pathway for developing high-voltage aqueous lithium batteries.

Solvation Structure and Derived Interphase Tuning for High-Voltage Ni-Rich Lithium Metal Batteries with High Safety Using Gem-Difluorinated Ionic Liquid Based Dual-Salt Electrolytes

Stabilizing electrolytes for high-voltage lithium metal batteries (LMBs) is crucial yet challenging, as they need to ensure stability against both Li anodes and high-voltage cathodes (above 4.5 V versus Li/Li+ ), addressing issues like poor cycling and thermal runaway. Herein, a novel gem-difluorinated skeleton of ionic liquid (IL) is designed and synthesized, and its non-flammable electrolytes successfully overcome aforementioned challenges. By creatively using dual salts, fluorinated ionic liquid and dimethyl carbonate as a co-solvent, the solvation structure of Li+ ions is efficiently controlled through electrostatic and weak interactions that are well unveiled and illuminated via nuclear magnetic resonance spectra. The as-prepared electrolytes exhibit high security avoiding thermal runaway and show excellent compatibility with high-voltage cathodes. Besides, the solvation structure derives a robust and stable F-rich interphase, resulting in high reversibility and Li-dendrite prevention. LiNi0.6 Co0.2 Mn0.2 O2 /Li LMBs (4.5 V) demonstrate excellent long-term stability with a high average Coulombic efficiency (CE) of at least 99.99 % and a good capacity retention of 90.4 % over 300 cycles, even can work at a higher voltage of 4.7 V. Furthermore, the ultrahigh Ni-rich LiNi0.88 Co0.09 Mn0.03 O2 /Li system also delivers excellent electrochemical performance, highlighting the significance of fluorinated IL-based electrolyte design and enhanced interphasial chemistry in improving battery performance.

Insights into the solvation chemistry in liquid electrolytes for lithium-based rechargeable batteries

Lithium-based rechargeable batteries have dominated the energy storage field and attracted considerable research interest due to their excellent electrochemical performance. As indispensable and ubiquitous components, electrolytes play a pivotal role in not only transporting lithium ions, but also expanding the electrochemical stable potential window, suppressing the side reactions, and manipulating the redox mechanism, all of which are closely associated with the behavior of solvation chemistry in electrolytes. Thus, comprehensively understanding the solvation chemistry in electrolytes is of significant importance. Here we critically reviewed the development of electrolytes in various lithium-based rechargeable batteries including lithium-metal batteries (LMBs), nonaqueous lithium-ion batteries (LIBs), lithium-sulfur batteries (LSBs), lithium-oxygen batteries (LOBs), and aqueous lithium-ion batteries (ALIBs), and emphasized the effects of interactions between cations, anions, and solvents on solvation chemistry, and functions of solvation chemistry in different types of electrolytes (strong solvating electrolytes, moderate solvating electrolytes, and weak solvating electrolytes) on the electrochemical performance and redox mechanism in the abovementioned rechargeable batteries. Specifically, the significant effects of solvation chemistry on the stability of electrode-electrolyte interphases, suppression of lithium dendrites in LMBs, inhibition of the co-intercalation of solvents in LIBs, improvement of anodic stability at high cut-off voltages in LMBs, LIBs and ALIBs, regulation of redox pathways in LSBs and LOBs, and inhibition of hydrogen/oxygen evolution reactions in LOBs are thoroughly summarized. Finally, the review concludes with a prospective outlook, where practical issues of electrolytes, advanced in situ/operando techniques to illustrate the mechanism of solvation chemistry, and advanced theoretical calculation and simulation techniques such as "material knowledge informed machine learning" and "artificial intelligence (AI) + big data" driven strategies for high-performance electrolytes have been proposed.

Sulfolane-containing aqueous electrolyte solutions for producing efficient ampere-hour-level zinc metal battery pouch cells

Aqueous zinc metal batteries are appealing candidates for grid energy storage. However, the inadequate electrochemical reversibility of the zinc metal negative electrode inhibits the battery performance at the large-scale cell level. Here, we develop practical ampere-hour-scale aqueous Zn metal battery pouch cells by engineering the electrolyte solution. After identifying the proton reduction as the primary source of H₂ evolution during Zn metal electrodeposition, we design an electrolyte solution containing reverse micelle structures where sulfolane molecules constrain water in nanodomains to hinder proton reduction. Furthermore, we develop and validate an electrochemical testing protocol to comprehensively evaluate the cell's coulombic efficiency and zinc metal electrode cycle life. Finally, using the reverse micelle electrolyte, we assemble and test a practical ampere-hour Zn||Zn_0.25V₂O₅•nH₂O multi-layer pouch cell capable of delivering an initial energy density of 70 Wh L^-1 (based on the volume of the cell components), capacity retention of about 80% after 390 cycles at 56 mA g^-1_cathode and ~25 °C and prolonged cycling for 5 months at 56 mA g^-1_cathode and ~25 °C.

Elucidating the cation hydration ratio in water-in-salt electrolytes for carbon-based supercapacitors

The solvation of cations is one of the important factors that determine the properties of electrolytes. Rational solvation structures can effectively improve the performance of various electrochemical energy storage devices. Water-in-Salt (WIS) electrolytes with a wide electrochemically stable potential window (ESW) have been proposed to realize high cell potential aqueous electrochemical energy storage devices relying on the special solvation structures of cations. The ratio of H₂O molecules participating in the primary solvation structure of a cation (a cation hydration ratio) is the key factor for the kinetics and thermodynamics of the WIS electrolytes under an electric field. Here, acetates with different cations were used to prepare WIS electrolytes. And, the effect of different cation hydration ratios on the properties of WIS electrolytes was investigated. Various WIS electrolytes exhibited different physicochemical properties, including the saturated concentration, conductivity, viscosity, pH values and ESW. The WIS electrolytes with a low cation hydration ratio (<100%, an NH₄-based WIS electrolyte) or a high cation hydration ratio (>100%, a K-based WIS electrolyte and a Cs-based WIS electrolyte) exhibit more outstanding conductivity or a wide ESW, respectively. SCs constructed from active carbon (AC) and these WIS electrolytes exhibited distinctive electrochemical properties. A SC with an NH₄-based WIS electrolyte was characterized by higher capacity and better rate capability. SCs with a K-based WIS electrolyte and a Cs-based WIS electrolyte were characterized by a wider operating cell potential, higher energy density and better ability to suppress self-discharge and gas production. These results show that a WIS electrolyte with a low cation hydration ratio or a high cation hydration ratio is suitable for the construction of power-type or energy-type aqueous SCs, respectively. This understanding provides the foundation for the development of novel WIS electrolytes for the application of SCs.