Biocatalytic 3D Actuation in Liquid Crystal Elastomers via Enzyme Patterning

Combinatorial High-Throughput Screening of Complex Polymeric Enzyme Immobilization Supports

Recent advances have demonstrated the promise of complex multicomponent polymeric supports to enable supra-biological enzyme performance. However, the discovery of such supports has been limited by time-consuming, low-throughput synthesis and screening. Here, we describe a novel combinatorial and high-throughput platform that enables rapid screening of complex and heterogeneous copolymer brushes as enzyme immobilization supports, named combinatorial high-throughput enzyme support screening (CHESS). Using a 384-well plate format, we synthesized arrays of three-component polymer brushes in the microwells using photoactivated surface-initiated polymerization and immobilized enzymes in situ. The utility of CHESS to identify optimal immobilization supports under thermally and chemically denaturing conditions was demonstrated usingBacillus subtilisLipase A (LipA). The identification of supports with optimal compositions was validated by immobilizing LipA on polymer-brush-modified biocatalyst particles. We further demonstrated that CHESS could be used to predict the optimal composition of polymer brushes a priori for the previously unexplored enzyme, alkaline phosphatase (AlkP). Our findings demonstrate that CHESS represents a predictable and reliable platform for dramatically accelerating the search of chemical compositions for immobilization supports and further facilitates the discovery of biocompatible and stabilizing materials.

Aquatic Functional Liquid Crystals: Design, Functionalization, and Molecular Simulation

Aquatic functional liquid crystals, which are ordered molecular assemblies that work in water environment, are described in this review. Aquatic functional liquid crystals are liquid-crystalline (LC) materials interacting water molecules or aquatic environment. They include aquatic lyotropic liquid crystals and LC based materials that have aquatic interfaces, for example, nanoporous water treatment membranes that are solids preserving LC order. They can remove ions and viruses with nano- and subnano-porous structures. Columnar, smectic, bicontinuous LC structures are used for fabrication of these 1D, 2D, 3D materials. Design and functionalization of aquatic LC sensors based on aqueous/LC interfaces are also described. The ordering transitions of liquid crystals induced by molecular recognition at the aqueous interfaces provide distinct optical responses. Molecular orientation and dynamic behavior of these aquatic functional LC materials are studied by molecular dynamics simulations. The molecular interactions of LC materials and water are key of these investigations. New insights into aquatic functional LC materials contribute to the fields of environment, healthcare, and biotechnology.

Bi-enzymatic chemo-mechanical feedback loop for continuous self-sustained actuation of conducting polymers

Artificial actuators have been extensively studied due to their wide range of applications from soft robotics to biomedicine. Herein we introduce an autonomous bi-enzymatic system where reversible motion is triggered by the spontaneous oxidation and reduction of glucose and oxygen, respectively. This chemo-mechanical actuation is completely autonomous and does not require any external trigger to induce self-sustained motion. The device takes advantage of the asymmetric uptake and release of ions on the anisotropic surface of a conducting polymer strip, occurring during the operation of the enzymes glucose oxidase and bilirubin oxidase immobilized on its surface. Both enzymes are connected via a redox polymer at each extremity of the strip, but at the opposite faces of the polymer film. The time-asymmetric consumption of both fuels by the enzymatic reactions produces a double break of symmetry of the film, leading to autonomous actuation. An additional break of symmetry, introduced by the irreversible overoxidation of one extremity of the polymer film, leads to a crawling-type motion of the free-standing polymer film. These reactions occur in a virtually unlimited continuous loop, causing long-term autonomous actuation of the device.

Lyotropic liquid crystal elastomers for drug delivery

Silicone elastomers like polydimethylsiloxane (PDMS) possess a combination of attractive material and biological properties motivating their widespread use in biomedical applications. Development of elastomers with capacity to deliver active therapeutic substances in the form of drugs is of particular interest to produce medical devices with added functionality. In this work, silicone-based lyotropic liquid crystal elastomers with drug-eluting functionality were developed using PDMS and triblock copolymer (diacrylated Pluronic F127, DA-F127). Various ternary PDMS-DA-F127-H₂O compositions were explored and evaluated. Three compositions were found to have specific properties of interest and were further investigated for their nanostructure, mechanical properties, water retention capacity, and morphology. The ability of the elastomers to encapsulate and release polar and nonpolar substances was demonstrated using vancomycin and ibuprofen as model drugs. It was shown that the materials could deliver both types of drugs with a sustained release profile for up to 6 and 5 days for vancomycin and ibuprofen, respectively. This works demonstrates a lyotropic liquid crystal, silicone-based elastomer with tailorable mechanical properties, water retention capacity and ability to host and release polar and nonpolar active substances.

Programming Orientation in Liquid Crystalline Elastomers Prepared with Intra-Mesogenic Supramolecular Bonds

The large, directional stimuli-response of aligned liquid crystalline elastomers (LCEs) could enable functional utility in robotics, medicine, consumer goods, and photonics. The alignment of LCEs has historically been realized via mechanical alignment of a two-stage reaction. Recent reports widely utilize chain extension reactions of liquid crystal monomers (LCM) to form LCEs that are subject to either surface-enforced or mechanical alignment. Here, we prepare LCEs that contain intra-mesogenic supramolecular bonds synthesized via direct free-radical chain transfer photopolymerization processible by a distinctive mechanical alignment mechanism. The LCEs were prepared by the polymerization of a benzoic acid monomer (11OBA), which dimerized to form a liquid crystal monomer, with a diacrylate LCM (C6M). The incorporation of the intra-mesogenic hydrogen bonds increases the achievable nematic order from mechanical programming. Accordingly, LCEs prepared with larger 11OBA concentration exhibit higher magnitude thermomechanical strain values when compared to a LCE containing only covalent bonds. These LCEs can be reprogrammed with heat to return the aligned film to the polydomain state. The LCE can then be subsequently programmed to orient in a different direction. The facile preparation of (re)programmable LCEs with supramolecular bonds opens new avenues for the implementation of these materials as shape deployable elements.