Iodine Uptake by Zr-/Hf-Based UiO-66 Materials: The Influence of Metal Substitution on Iodine Evolution

Synthesis of highly soluble zirconium organic cages by iodine substitution toward a CO2/N2 separation membrane

Metal organic cages (MOCs) show promise as fillers in mixed-matrix membranes (MMMs) for gas separation; highly soluble MOCs are desirable for fabrication of high-compatibility membranes. Herein, we report an iodine substitution strategy to substantially increase the MOC solubility. The synthesized MOC of ZrT-NH2-I possesses over 10-fold higher solubility than the parent ZrT-NH2 in organic solvents whilst retaining the original molecular structure and permanent porosity. Such enhanced solubility allows for the effective integration of ZrT-NH2-I with an amidoxime polymer of intrinsic microporosity (PIM-PAO), resulting in a compatible MMM with a uniform distribution of MOC. The ZrT-NH2-I@PIM-PAO MMM demonstrates a CO2 permeability of 1377 barrer and a CO2/N2 gas selectivity of 45 which is 45 times that of the membrane made from ZrT-NH2. The permeability-selectivity performance not only surpasses the 2008 upper bound, but also exceeds those of currently available MMMs.

One-Pot Preparation of Nitro-Functionalized Bimetallic UiO-66(Zr-Hf) with Hierarchical Porosity for Oxidative Desulfurization Performance

Preparation of multifunctional metal-organic frameworks (MOFs) offers new opportunities to obtain ultrahigh synergistic catalytic performance for heterogeneous reactions; however, the application of a one-pot method for preparing multifunctional MOFs remains challenging. Herein, we develop a one-pot green route for synthesizing bimetallic nitro-functionalized UiO-66(Zr-Hf)-NO2 with hierarchical porosity under solvent-free conditions. The optimal UiO-66(Zr-Hf0.6)-NO2 shows an ultrahigh enhancement of oxidative desulfurization (ODS) efficiency to oxidize sulfur compounds (1000 ppm sulfur) in a model fuel at 40 °C within 12 min due to the introduction of more active Hf sites in the nodes, the increased Lewis acidity of Zr/Hf-O nodes by the electron-withdrawing NO2 group, and the enhanced diffusion rates by the mesopores. The turnover frequency (TOF) over UiO-66(Zr-Hf0.6)-NO2 at 40 or 50 °C reaches 145.3 or 217.0 h-1 that surpasses the TOF of most reported MOF-based catalysts in the ODS reaction. Quenching and electron paramagnetic resonance experiments confirm that the formed Hf-OH on the Zr/Hf-O nodes can easily decompose the oxidant (H2O2) for generating a Hf-OOH-active intermediate and dominate the ODS efficiency. This contribution provides a one-pot solvent-free avenue to synthesize multifunctional MOFs for enhancing their catalytic activities for targeted applications.

Stability of Iodine Species Trapped in Titanium-Based MOFs: MIL-125 and MIL-125_NH2

Two titanium-based MOFs MIL-125 and MIL-125_NH2 are synthesized and characterized using high-temperature powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), N2 sorption, Fourier transformed infrared spectroscopy (FTIR), Raman spectroscopy, ultraviolet-visible spectroscopy (UV-Vis), and electron paramagnetic resonance (EPR). Stable up to 300 °C, both compounds exhibited similar specific surface areas (SSA) values (1207 and 1099 m2 g-1 for MIL-125 and MIL-125_NH2, respectively). EPR signals of Ti3+ are observed in both, whith MIL-125_NH2 also showing ─NH2 ●+ signatures. Both MOFs efficiently adsorbed iodine in continuous gas flow over five days, with MIL-125 trapping 1.9 g.g-1 and MIL-125_NH2 trapping 1.6 g.g-1. MIL-125_NH2 exhibited faster adsorption kinetics due to its smaller band gap (2.5 against 3.6 eV). In situ Raman spectroscopy conducted during iodine adsorption revealed signal evolution from "free" I2 to "perturbed" I2, and I3 -. TGA and in situ Raman desorption experiments showed that ─NH2 groups improved the stabilization of I3 - due to an electrostatic interaction with NH2 ●+BDC radicals. The Albery model indicated longer lifetimes for iodine desorption in I2@MIL-125_NH2, attributed to a rate-limiting step due to stronger interaction between the anionic iodine species and the ─NH2 ●+ radicals. This study underscores how MOFs with efficient charge separation and hole-stabilizer functional groups enhance iodine stability at higher temperatures.

Highly Dispersive Gold Nanoclusters Confined within Micropores of Defective UiO-66 for Highly Efficient Aldehyde Oxidation at Mild Conditions

The oxidative esterification of aldehydes under mild conditions remains a significant challenge. This study introduces a unique defective UiO-66 to achieve gold nanoclusters (AuNCs) for efficient aldehyde oxidation under mild conditions. The construction and characterization of these materials are thoroughly investigated by techniques of XRD, SEM and TEM images, FT-IR, Raman, and XPS spectrum, emphasizing the unique microporous in defective UiO-66 are conducive to the fabrication of AuNCs. The catalytic performance of the prepared materials in aldehyde oxidation reactions is systematically evaluated, demonstrating the remarkable efficiency of dispersed Au@UiO-66-25 with high-content (9.09 wt%) Au-loading and ultra-small size (~2.7 nm). Moreover, mechanistic insights into the catalytic process under mild conditions (70 °C for 1 h) are provided, elucidating the determination of defective UiO-66 in the confined fabrication of AuNCs and subsequent furfural adsorption, which underlie the principles governing the observed enhancements. This study establishes the groundwork for the synthesis of highly dispersed and catalytically active metal nanoparticles using defective MOFs as a platform, advancing the catalytic esterification reaction of furfural to the next level.

Co-adsorption performance of iodine and NOX in iodine exhaust gas by NH2-MIL-125

Ti-based MOFs exhibit ultra-high stability in radioactive waste gases containing nitrogen oxides (NOX) and are effective in capturing radioactive iodine. In this study, NH2-MIL-125 was synthesized via a one-pot solvothermal method and its adsorption performance for iodine was investigated using batch adsorption experiments, the stability of materials was tested by simulating post-processing conditions. The results indicated that NH2-MIL-125 had a maximum iodine adsorption capacity of 1.61 g/g at 75 ℃ and reached adsorption equilibrium within 60 min, and the adsorption capacity of methyl iodine reached 776.9 mg/g. The material also exhibited excellent stability and iodine adsorption performance in the presence of NOX. After soaking in NO2 for 24 h, its structure remained stable and the adsorption capacity for iodine remained at 231.5 mg/g. The excellent co-adsorption performance of NH2-MIL-125 on iodine and NOX was attributed to the synergistic effects of Ti-OH groups and amino functional groups. These findings provide a reference for the capture of radioactive iodine and also demonstrate the potential of NH2-MIL-125 for iodine capture during spent fuel reprocessing.

Modulator-assisted solvent-free synthesis of amorphous zirconium terephthalate catalyst for efficient oxidative desulfurization

Oxidative desulfurization (ODS) emerges as a critical player in enhancing efficient fuel desulfurization and promoting sustainable clean energy. Metal-organic frameworks (MOFs) show great potential as ODS catalysts because of their exceptional porosity and versatility. This study explores the use of amorphous metal-organic frameworks (aMOFs), which combine MOFs' structural advantages with unique properties of amorphous materials, to enhance catalytic efficiency in ODS. Traditional methods for synthesizing MOFs rely on solvent-thermal or solvent-free methods, each with limitations in environmental impact or scalability. To address this, we introduce a novel strategy utilizing a small quantity of benzoic acid (BA) modifier to facilitate the solvent-free, one-pot, mechanical synthesis of amorphous zirconium terephthalate (GU-2BA-3h). The resulting GU-2BA-3h demonstrates exceptional ODS performance, efficiently removing 1000 ppm of dibenzothiophene (DBT) in just 6 min at 60 °C. Amorphous GU-2BA-3h features an expanded external surface area, increased acidic sites, and exceptional stability, resulting in a high turnover frequency (19.6 h-1) and outstanding catalytic activity (53.2 mmol g-1 h-1), establishing it as a highly efficient ODS catalyst. This remarkable performance arises from the formation of dangling carboxyl groups and active metal sites due to the competitive coordination of benzoic acid with the linker. Experimental evidence confirms that these carboxyl groups and exposed Zr-OH sites interact with oxidants, generating hydroxyl radicals that effectively eliminate sulfur-containing compounds. Furthermore, the methodology exhibits universality in constructing amorphous Zr-based MOFs, and provides an eco-friendly, cost-effective route for efficient ODS catalyst production.

Improving the removal efficiency of oxygenated volatile organic compounds by defective UiO-66 regulated with water

The purification of oxygenated volatile organic compounds VOCs (OVOCs), important precursors of ozone and particulate matters, has triggered intensive research interests. UiO-66 with high photocatalytic activity have shown great potential. However, the lack of active sites severely limited the trapping and degradation of OVOCs. Herein, reo-UiO-66 with increased specific surface area, hierarchical porous structure and tunable acidic/basic sites was synthesized by simply adding water as the modulator. XRD, TGA and FTIR results confirmed the formation of reo-defects, which significantly affected the surface hydrophilicity and active sites of UiO-66. The adsorption of Lewis acidic acetaldehyde was enhanced by 265 times with coordinative unsaturated Zr acting as the dominant adsorption sites. The degradation efficiency of typical OVOCs (acetaldehyde and acetone) increased from 0% and 25% to 50% and 73%, respectively. This work provided a facile method to modulate the micro-environment in MOFs for the efficient capture and catalytic purification of OVOCs.

σ-Hole Effect-Induced Electroluminescence of Halogen Cocrystals for Determination of Iodide in Seawater

Developing new electrochemiluminescence (ECL) luminators with high stability, wide applicability, and strong designability is of great strategic significance to promote the ECL field to the frontier. Here, driven by the I···N bond, 1,3,5-trifluoro-2,4,6-triiodobenzene (TFTI) and 2,4,6-trimethyl-1,3,5-triazine (TMT) self-assembled into a novel halogen cocrystal (TFTI-TMT) through slow solution volatilization. Significant difference of charge density existed between the N atoms on TMT and the σ-hole of the I atoms on TFTI. Upon the induction of σ-hole effect, high-speed and spontaneous charge transferring from TMT to the σ-hole of TFTI occurred, stimulating exciting ECL signals. Besides, the σ-hole of the I atoms could capture iodine ions specifically, which blocked the original charge transfer from the N atoms to the σ-hole, causing the ECL signal of TFTI-TMT to undergo a quenching rate as high as 92.9%. Excitingly, the ECL sensing of TFTI-TMT toward I- possessed a wide linear range (10-5000 nM) and ultralow detection limit (3 nM) in a real water sample. The halogen cocrystal strategy makes σ-hole a remarkable new viewpoint of ECL luminator design and enables ECL analysis technology to contribute to addressing the environmental and health threats posed by iodide pollution.

Enhanced Iodine Capture Using a Postsynthetically Modified Thione-Silver Zeolitic Imidazole Framework

Efficient management of radionuclides that are released from various processes in the nuclear fuel cycle is of significant importance. Among these nuclides, radioactive iodine (mainly 129I and 131I) is a major concern due to the risk it poses to the environment and to human health; thus, the development of materials that can capture and safely store radioactive iodine is crucial. Herein, a novel silver-thione-functionalized zeolitic imidazole framework (ZIF) was synthesized via postsynthetic modification and assessed for its iodine uptake capabilities alongside the parent ZIF-8 and intermediate materials. A solvent-assisted ligand exchange procedure was used to replace the 2-methylimidazole linkers in ZIF-8 with 2-mercaptoimidazole, forming intermediate compound ZIF-8 = S, which was reacted with AgNO3 to yield the ZIF-8 = S-Ag+ composite for iodine uptake. Despite possessing the lowest BET surface area of the derivatives, the Ag-functionalized material demonstrated superior I2 adsorption in terms of both maximum capacity (550 g I2/mol) and rapid kinetics (50% loading achieved in 5 h, saturation in 50 h) compared to that of our pristine ZIF-8, which reached 450 g I2/mol after 150 h and 50% loading in 25 h. This improvement is attributed to the presence of the Ag+ ions, which provide a strong chemical driving force to form a stable Ag-I species. The results of this study contribute to a broader understanding of the strategies that can be employed to engineer adsorbents with robust iodine uptake behavior.

A Halogen-Bonded Organic Framework (XOF) Emissive Cocrystal for Acid Vapor and Explosive Sensing, and Iodine Capture

There is a strong and urgent need for efficient materials that can capture radioactive iodine atoms from nuclear waste. This work presents a novel strategy to develop porous materials for iodine capture by employing halogen bonding, mechanochemistry and crystal engineering. 3D halogen-bonded organic frameworks (XOFs) with guest-accessible permanent pores are exciting targets in crystal engineering for developing functional materials, and this work reports the first example of such a structure. The new-found XOF, namely TIEPE-DABCO, exhibits enhanced emission in the solid state and turn-off emission sensing of acid vapors and explosives like picric acid in nanomolar quantity. TIEPE-DABCO captures iodine from the gas phase (3.23 g g-1 at 75 °C and 1.40 g g-1 at rt), organic solvents (2.1 g g-1 ), and aqueous solutions (1.8 g g-1 in the pH range of 3-8); the latter with fast kinetics. The captured iodine can be retained for more than 7 days without any leaching, but readily released using methanol, when required. TIEPE-DABCO can be recycled for iodine capture several times without any loss of storage capacity. The results presented in this work demonstrate the potential of mechanochemical cocrystal engineering with halogen bonding as an approach to develop porous materials for iodine capture and sensing.

Novel Biocompatible Trianglamine Networks for Efficient Iodine Capture

Herein, we report for the first time a biocompatible cross-linked trianglamine (Δ) network for the efficient iodine removal from the vapor phase, water, and seawater. In the vapor phase, the cross-linked network could capture 6 g g-1 of iodine, ranking among the most performant materials for iodine vapor capture. In the liquid phase, this cross-linked network is also capable of capturing iodine at high rates from aqueous media (water and seawater). This network displayed fast adsorption kinetics, and they are fully recyclable. This study reveals the high affinity of iodine for the intrinsic cavity of the trianglamine. The synthesized materials are extremely interesting since they are environmentally friendly and inexpensive and the synthesis could easily be scaled up to be used as the material of choice in response to accidents in the nuclear industry.

Electron-Donor Functional Groups, Band Gap Tailoring, and Efficient Charge Separation: Three Keys To Improve the Gaseous Iodine Uptake in MOF Materials

Metal-organic frameworks (MOFs) have been largely investigated worldwide for their use in the capture of radioactive iodine due to its potential release during nuclear accident events and reprocessing of nuclear fuel. The present work deals with the capture of gaseous I₂ under a continuous flow and its subsequent transformation into I₃^- within the porous structures of three distinct, yet structurally related, terephthalate-based MOFs: MIL-125(Ti), MIL-125(Ti)_NH₂, and CAU-1(Al)_NH₂. The synthesized materials exhibited specific surface areas (SSAs) with similar order of magnitude: 1207, 1099, and 1110 m² g^-1 for MIL-125(Ti), MIL-125(Ti)_NH₂, and CAU-1(Al)_NH₂, respectively. Because of that, it was possible to evaluate the influence of other variables over the iodine uptake capacity─such as band gap energies, functional groups, and charge transfer complexes (CTC). After 72 h of contact with the I₂ gas flow, MIL-125(Ti)_NH₂ was able to trap 11.0 mol mol^-1 of I₂, followed by MIL-125(Ti) (8.7 mol mol^-1), and by CAU-1(Al)_NH₂ (4.2 mol mol^-1). The enhanced ability to retain I₂ in the MIL-125(Ti)_NH₂ was associated with a combined effect between its amino group (which has a great affinity toward iodine), its smaller band gap (2.5 eV against 2.6 and 3.8 eV for CAU-1(Al)_NH₂ and MIL-125(Ti), respectively), and its efficient charge separation. In fact, the presence of a linker-to-metal charge transfer (LMCT) mechanism in MIL-125(Ti) compounds separates the photogenerated electrons and holes into the two distinct moieties of the MOF: the organic linker (which stabilizes the holes) and the oxy/hydroxy inorganic cluster (which stabilizes the electrons). This effect was observed using EPR spectroscopy, whereas the reduction of the Ti⁴⁺ cations into the paramagnetic Ti³⁺ species was evidenced after irradiation of the pristine Ti-based MOFs with UV light (<420 nm). In contrast, because CAU-1(Al)_NH₂ exhibits a purely linker-based transition (LBT)─with no EPR signals related to Al paramagnetic species─it tends to exhibit faster recombination of the photogenerated charge carriers as, in this case, both electrons and holes are located over the organic linker. Furthermore, the transformation of the gaseous I₂ into I_n^- [n = 5, 7, 9, ...] intermediates and then into I₃^- species was evaluated using Raman spectroscopy by following the evolution of their respective bands at about 198, 180, and 113 cm^-1. This conversion─which is favored by an effective charge separation and smaller band gaps─increases the I₂ uptake capacity of the compounds by creating specific adsorption sites for these anionic species. In fact, because the -NH₂ groups act as an antenna to stabilize the photogenerated holes, both I_n^- and I₃^- are adsorbed into the organic linker via an electrostatic interaction with these positively charged entities. Finally, changes regarding the EPR spectra before and after the iodine loading were considered to propose a mechanism for the electron transfer from the MOFs structure to the I₂ molecules considering their different characteristics.

Adsorption and Detection of Iodine Species by a Thorium-Based Metal-Organic Framework

Actinide-bearing metal-organic frameworks (MOFs) encompass intriguing structures and properties, but the radioactivity of actinide cripples their applications. Herein, we have constructed a new thorium-based MOF (Th-BDAT) as a bifunctional platform for the adsorption and detection of radioiodine, a more radioactive fission product that can readily spread through the atmosphere in its molecular form or via solution as anionic species. The iodine capture within the framework of Th-BDAT from both the vapor phase and the cyclohexane solution has been verified, showing that Th-BDAT features maximum I₂ adsorption capacities (Q_max) of 959 and 1046 mg/g, respectively. Notably, the Q_max of Th-BDAT toward I₂ from cyclohexane solution ranks among the highest value for Th-MOFs reported to date. Furthermore, incorporating highly extended and π-electron-rich BDAT^4- ligands renders Th-BDAT as a luminescent chemosensor whose emission can be selectively quenched by iodate with a detection limit of 1.367 μM. Our findings thus foreshadow promising directions that might unlock the full potential of actinide-based MOFs from the point of view of practical application.