Laser-Reduced BiVO4 for Enhanced Photoelectrochemical Water Splitting

An anthraquinone-based bismuth-iron metal-organic framework as an efficient photoanode in photoelectrochemical cells

Metal-organic frameworks (MOFs) are appealing candidate materials to design new photoelectrodes for use in solar energy conversion because of their modular nature and chemical versatility. However, to date there are few examples of MOFs that can be directly used as photoelectrodes, for which they must be able to afford charge separation upon light absorption, and promote the catalytic dissociation of water molecules, while maintaining structural integrity. Here, we have explored the use of the organic linker anthraquinone-2, 6-disulfonate (2, 6-AQDS) for the preparation of MOFs to be used as photoanodes. Thus, the reaction of 2, 6-AQDS with Bi(iii) or a combination of Bi(iii) and Fe(iii) resulted in two new MOFs, BiPF-10 and BiFePF-15, respectively. They display similar structural features, where the metal elements are disposed in inorganic-layer building units, which are pillared by the organic linkers by coordination bonds through the sulfonic acid groups. We show that the introduction of iron in the structure plays a crucial role for the practical use of the MOFs as a robust photoelectrode in a photoelectrochemical cell, producing as much as 1.23 mmol H2 cm-2 with the use of BiFePF-15 as photoanode. By means of time-resolved and electrochemical impedance spectroscopic studies we have been able to unravel the charge transfer mechanism, which involves the formation of a radical intermediate species, exhibiting a longer-lived lifetime by the presence of the iron-oxo clusters in BiFePF-15 to reduce the charge transfer resistance.

Dual Shield: Bifurcated Coating Analysis of Multilayered WO3/BiVO4/TiO2/NiOOH Photoanodes for Sustainable Solar-to-Hydrogen Generation from Challenging Waters

The heterostructure WO3/BiVO4-based photoanodes have garnered significant interest for photoelectrochemical (PEC) solar-driven water splitting to produce hydrogen. However, challenges such as inadequate charge separation and photocorrosion significantly hinder their performance, limiting overall solar-to-hydrogen conversion efficiency. The incorporation of cocatalysts has shown promise in improving charge separation at the photoanode, yet mitigating photocorrosion remains a formidable challenge. Amorphous metal oxide-based passivation layers offer a potential solution to safeguard semiconductor catalysts. We examine the structural, surface morphological, and optical properties of two-step-integrated sputter and spray-coated TiO2 thin films and their integration onto WO3/BiVO4, both with and without NiOOH cocatalyst deposition. The J-V experiments reveal that the NiOOH cocatalyst enhances the photocurrent density of the WO3/BiVO4 photoanode in water splitting reactions from 2.81 to 3.87 mA/cm2. However, during prolonged operation, the photocurrent density degrades by 52%. In contrast, integrated sputter and spray-coated TiO2 passivation layer-coated WO3/BiVO4/NiOOH samples demonstrate a ∼88% enhancement in photocurrent density (5.3 mA/cm2) with minimal degradation, emphasizing the importance of a strategic coating protocol to sustain photocurrent generation. We further explore the feasibility of using natural mine wastewater as an electrolyte feedstock in PEC generation. Two-compartment PEC cells, utilizing both fresh water and metal mine wastewater feedstocks exhibit 66.6 and 74.2 μmol/h cm2 hydrogen generation, respectively. Intriguingly, the recovery of zinc (Zn2+) heavy metals on the cathode surface in the mine wastewater electrolyte is confirmed through surface morphology and elemental analysis. This work underscores the significance of passivation layer and cocatalyst coating methodologies in a sequential order to enhance charge separation and protect the photoanode from photocorrosion, contributing to sustainable hydrogen generation. Additionally, it suggests the potential of utilizing wastewater in electrolyzers as an alternative to freshwater resources.

Thioredoxin Reductase-Mediated Reaction Evokes In Situ Surface Polarization Effect on BiOIO3: Toward a New Sensing Strategy for Cathodic Photoelectrochemistry

We have witnessed the fast progress of cathodic photoelectrochemistry over the past decades, though its signal transduction tactic still lacks diversity. Exploring new sensing strategies for cathodic photoelectrochemistry is extremely demanding yet hugely challenging. This article puts forward a unique idea to incorporate an enzymatic reaction-invoked surface polarization effect (SPE) on the surface of BiOIO3 to implement an innovative cathodic photoelectrochemical (PEC) bioanalysis. Specifically, the thioredoxin reductase (TrxR)-mediated reaction produced the polar glutathione (GSH), which spontaneously coordinated to the surface of BiOIO3 and induced SPE by forming a polarized electric field, resulting in improved electron (e-) and hole (h+) pair separation efficiency and an enhanced photocurrent output. Correlating this phenomenon with the detection of TrxR exhibited a high performance in terms of sensitivity and selectivity, achieving a linear range of 0.007-0.5 μM and a low detection limit of 2.0 nM (S/N = 3). This study brings refreshing inspiration for the cathodic PEC signal transduction tactic through enzyme-mediated in situ reaction to introduce SPE, which enriches the diversity of available signaling molecules. Moreover, this study unveils the potential of in situ generated SPE for extended and futuristic applications.

Light-Driven Nitrogen Fixation to Ammonia over Aqueous-Dispersed Mo-Doped TiO2 Colloidal Nanocrystals

Photocatalytic nitrogen fixation to ammonia and nitrates holds great promise as a sustainable route powered by solar energy and fed with renewable energy resources (N2 and H2O). This technology is currently under deep investigation to overcome the limited efficiency of the process. The rational design of efficient and robust photocatalysts is crucial to boost the photocatalytic performance. Widely used bulk materials generally suffer from charge recombination due to poor interfacial charge transfer and difficult surface diffusion. To overcome this limitation, this work explores the use of aqueous-dispersed colloidal semiconductor nanocrystals (NCs) with precise morphological control, better carrier mobility, and stronger redox ability. Here, the TiO2 framework has been modified via aliovalent molybdenum doping, and resulting Mo-TiO2 NCs have been functionalized with charged terminating hydroxyl groups (OH-) for the simultaneous production of ammonia, nitrites, and nitrates via photocatalytic nitrogen reduction in water, which has not been previously found in the literature. Our results demonstrate the positive effect of Mo-doping and nanostructuration on the overall N2 fixation performance. Ammonia production rates are found to be dependent on the Mo-doping loading. 5Mo-TiO2 delivers the highest NH4+ yield rate (ca. 105.3 μmol g-1 L-1 h-1) with an outstanding 90% selectivity, which is almost four times higher than that obtained over bare TiO2. The wide range of advance characterization techniques used in this work reveals that Mo-doping enhances charge-transfer processes and carriers lifetime as a consequence of the creation of new intra band gap states in Mo-doped TiO2 NCs.

Rapid Synthesis of Ultrathin Ni:FeOOH with In Situ-Induced Oxygen Vacancies for Enhanced Water Oxidation Activity and Stability of BiVO4 Photoanodes

The coupling of oxygen evolution reaction (OER) catalysts with photoanodes is a promising strategy for enhancing the photoelectrochemical (PEC) performance by passivating photoanode's surface defect states and facilitating charge transfer at the photoanode/electrolyte interface. However, a serious interface recombination issue caused by poor interface and OER catalysts coating quality often limits further performance improvement of photoanodes. Herein, a rapid Fenton-like reaction method is demonstrated to produce ultrathin amorphous Ni:FeOOH catalysts with in situ-induced oxygen vacancies (Vo) to improve the water oxidation activity and stability of BiVO₄ photoanodes. The combined physical characterizations, PEC studies, and density functional theory calculations revealed that the reductive environment in a Fenton-like reaction in situ produces abundant Vo in Ni:FeOOH catalysts, which significantly improves charge separation and charge transfer efficiency of BiVO₄ while also offering abundant active sites and a reduced energy barrier for OER. As a result, Ni:FeOOH-Vo catalysts yielded a more than 2-fold increased photocurrent density in the BiVO₄ photoanode (from 1.54 to 4.15 mA cm^-2 at 1.23 V_RHE), accompanied by high stability for 5 h. This work not only highlights the significance of abundant Vo in catalysts but also provides new insights into the rational design and fabrication of efficient and stable solar water-splitting systems.

Scanning with Laser Beam over the TiO2 Nanotubes Covered with Thin Chromium Layers towards the Activation of the Material under the Visible Light

This work presents pulsed UV laser treatment (355 nm, 2 Hz) of TiO₂ nanotubes decorated with chromium oxides. The modification was performed in a system equipped with a beam homogenizer, and during the irradiation, the samples were mounted onto the moving motorized table. In such a system, both precisely selected areas and any large area of the sample can be modified. Photoelectrochemical tests revealed photoresponse of laser-treated samples up to 1.37- and 18-fold under the illumination with ultraviolet-visible and visible light, respectively, in comparison to bare titania. Optimal beam energy fluence regarding sample photoresponse has been established. Scanning electron microscopy images, X-ray diffraction patterns, along with Raman and X-ray photoelectron spectra, suggest that the enhanced photoresponse results from changes solely induced in the layer of chromium oxides. It is believed that the results of the present work will contribute to a wider interest in laser modification of semiconductors exhibiting improved photoelectrochemical activity.