Alcohol-Stable Perovskite Nanocrystals and Their In Situ Capsulation with Polystyrene

Perovskite Nanocrystals In Situ Encapsulated in TiO2 Microspheres for Stable CO2 Photoreduction in Water

Photoreduction of carbon dioxide (CO2) into fuels presents a promising approach to mitigate global warming and energy crises. Halide perovskite nanocrystals (NCs) with prominent optoelectronic properties have triggered substantial attention as photocatalysts but are limited by the charge recombination and instability. Here, we develop stable CsPbBr3/titania microspheres (TMs) by in situ growth of CsPbBr3 NCs inside mesoporous TMs through solid-state sintering, which significantly improves the stability of perovskite NCs, making them applicable in water with efficient CO2 photoreduction performance. Notably, the CsPbBr3/TMs demonstrates a 6.73- and 9.23-fold increase in the rate of CH4 production compared to TMs and CsPbBr3, respectively. The internal electric field facilitates S-scheme charge transfer, enhancing the separation of electron-hole pairs, as evidenced by X-ray photoelectron spectroscopy and electron paramagnetic resonance analysis, which is pivotal for the selective photoreduction of CO2. These insights pave the way for the design of CsPbBr3-based photocatalysts with superior efficiency and stability.

Exceptional Stability against Water, UV Light, and Heat for CsPbBr3@Pb-MOF Composites

All-inorganic lead halide perovskite nanocrystals (NCs) have been widely applied in optoelectronic devices owing to their excellent photoluminescence (PL) properties. However, poor stability upon exposure to water, UV light or heat strongly limits their practical application. Herein, CsPbBr3@Pb-MOF composites with exceptional stability against water, UV light, and heat are synthesized by ultrasonic processing the precursors of lead-based MOF (Pb-MOF), oleylammonium bromide (OAmBr) and cesium oleate (Cs-OA) solutions at room temperature. Pb-MOF can not only provide the lead source for the in situ growth of CsPbBr3 NCs, but also the protective layer of perovskites NCs. The formed CsPbBr3@Pb-MOF composites show a considerable PL quantum yield (PLQY) of 67.8%, and can maintain 90% of the initial PL intensity when immersed in water for 2 months. In addition, the outstanding PL stability against UV light and heat is demonstrated with CsPbBr3 NCs synthesized by the conventional method as a comparison. Finally, a green (light-emitting diode) LED is fabricated using green-emitting CsPbBr3@Pb-MOF composites and exhibits excellent stability without packaging when immersed in water for 30 days. This study provides a practical approach to improve the stability in aqueous phase, which may pave the way for future applications for various optoelectronic devices.

Encapsulation of Pure Water-Stable Perovskite Nanocrystals (PNCs) into Biological Environment-Stable PNCs for Cell Imaging

Recently emerging perovskite nanocrystals (PNCs) are very attractive fluorescence nanomaterials due to their very narrow emission peak, tunable wavelength, and extremely high quantum yield, but their chemosensing, biosensing and bioimaging applications suffer from the poor stability of ordinary PNCs in aqueous media, especially in biological matrices. Recently developed water-stable 2D CsPb2Br5-encapsulated 3D CsPbBr3 PNCs (i.e., CsPbBr3/CsPb2Br5 PNCs) show extremely stable light emission in pure water, but their fluorescence is seriously quenched in aqueous media containing biological molecules due to their chemical reactions. In this work, we used a facile method to encapsulate pure water-stable CsPbBr3/CsPb2Br5 PNCs in water with SiO2 and polyethylene glycol hexadecyl ether (Brij58) into a new kind of biological environment-stable PNCs (CsPbBr3/CsPb2Br5@SiO2-Brij58). The synthesis of the target PNCs can be accomplished in a fast, easy, and green way. The obtained CsPbBr3/CsPb2Br5@SiO2-Brij58 PNCs maintain strong fluorescence emission for a long time, all in pH 7.4 PBS, BSA, and minimum essential medium, exhibiting excellent biological environment stability. Moreover, the developed biological environment-stable PNCs show good biocompatibility and have been successfully used in cell imaging. Overall, the work provides an easy, low-cost, and efficient application of PNCs in bioimaging.

Stable and luminescent cesium copper halide nanocrystals embedded in flexible polymer fibers for fabrication of down-converting WLEDs

Recently, CsPbX3 (X = I, Br, Cl) perovskite nanocrystals (NCs) have drawn wide attention owing to their outstanding photophysical and optoelectronic properties. However, the toxicity of such NCs remained a big challenge for further commercialization. Herein, we adopt facile methods for synthesizing green-emissive Cs3Cu2Cl5 and blue-emissive Cs3Cu2Br2.5I2.5 perovskite NCs that exhibit broad emission spectra with large Stokes shifts. These NCs showed photoluminescence quantum yields (PLQY) up to 65% (Cs3Cu2Cl5 NCs) and 32% (Cs3Cu2Br2.5I2.5 NCs) with limited stabilities. To further improve the stability, the NCs were blended with a hydrophobic polymer poly-methylmethacrylate (PMMA) and embedded inside the polymer fiber by an electrospinning process to form composite fibers. The as-prepared Cs3Cu2Cl5@PMMA and Cs3Cu2Br2.5I2.5@PMMA fiber films demonstrated good surface coverage and better thermal stability, and even retained their emission properties when dispersed in water. The emissive fibers were also deposited on flexible polyethylene terephthalate (PET) substrates that displayed high resistance towards bending and twisting with no signs of breakage, damage, or loss of optical properties. Finally, UV-pumped phosphor-converted WLEDs fabricated by using these blue and green-emitting fibers revealed CIE chromaticity coordinates at (0.27, 0.33) with a maximum luminous efficiency of 69 Lm W-1 and correlated color temperature (CCT) value of 8703 K. These outcomes can be beneficial for the development of futuristic flexible display technologies.

One-Step Ultrasonic Preparation of Stable Bovine Serum Albumin-Perovskite for Fluorescence Analysis of L-Ascorbic Acid and Alkaline Phosphatase

Halide lead perovskite has attracted increased attention due to its excellent optical properties. However, the poor stability of the halide lead perovskite nanocrystals has been a major obstacle to their application in biosensing. Here, we proposed a method to synthesize CsPbBr3/BSA NCs perovskite using bovine serum albumin (BSA) as a zwitterion ligand. Then, a fluorescent sensor for alkaline phosphatase determination based on CsPbBr3/BSA NCs was successfully built via the interaction of L-ascorbic acid (AA) with BSA on the perovskite surface. Under optimal conditions, the sensor showed a linear concentration range from 50 to 500 μM with a detection limit of 28 μM (signal-to-noise ratio of 3) for AA, and demonstrated a linear concentration range from 40 to 500 U/L with a detection limit of 15.5 U/L (signal-to-noise ratio of 3) for alkaline phosphatase (ALP). In addition, the proposed fluorescent biosensor exhibited good selectivity and recovery in the determination of ALP in human serum. This strategy offers an innovative way for enhancing the water stability of lead halide perovskite and promoting their application in biosensing areas.

Advancements in Perovskite Nanocrystal Stability Enhancement: A Comprehensive Review

Over the past decade, perovskite technology has been increasingly applied in solar cells, nanocrystals, and light-emitting diodes (LEDs). Perovskite nanocrystals (PNCs) have attracted significant interest in the field of optoelectronics owing to their exceptional optoelectronic properties. Compared with other common nanocrystal materials, perovskite nanomaterials have many advantages, such as high absorption coefficients and tunable bandgaps. Owing to their rapid development in efficiency and huge potential, perovskite materials are considered the future of photovoltaics. Among different types of PNCs, CsPbBr₃ perovskites exhibit several advantages. CsPbBr₃ nanocrystals offer a combination of enhanced stability, high photoluminescence quantum yield, narrow emission bandwidth, tunable bandgap, and ease of synthesis, which distinguish them from other PNCs, and make them suitable for various applications in optoelectronics and photonics. However, PNCs also have some shortcomings: they are highly susceptible to degradation caused by environmental factors, such as moisture, oxygen, and light, which limits their long-term performance and hinders their practical applications. Recently, researchers have focused on improving the stability of PNCs, starting with the synthesis of nanocrystals and optimizing (i) the external encapsulation of crystals, (ii) ligands used for the separation and purification of nanocrystals, and (iii) initial synthesis methods or material doping. In this review, we discuss in detail the factors leading to instability in PNCs, introduce stability enhancement methods for mainly inorganic PNCs mentioned above, and provide a summary of these approaches.