Amphiphilic Nanointerface: Inducing the Interfacial Activation for Lipase

Phase-Specific Immobilization of Phospholipase D as an Efficient Pickering Emulsion Interfacial Catalyst for Converting Antarctic Krill Oil Phospholipid

Phosphatidylserine (PS), a rare phospholipid in Antarctic krill oil (AKO) critical for brain development, can be produced from the abundant phosphatidylcholine (PC) using phospholipase D (PLD) in Pickering emulsion interfacial catalysis (PIC) systems. However, the exposure of PLD to organic solvent around the emulsion interface diminished PLD activity, limiting the conversion efficiency of PS. In this study, we proposed a strategy to fabricate a PIC system with high efficiency and stability by immobilizing PLD in a specific phase on the emulsion interface, based on investigating the effect of the interfacial microenvironment on PLD activity. Janus-poly(acrylic acid)/polystyrene (JPP) and Janus-polyethylenimine/octadecane (JPO) particles were fabricated as carriers to realize the specific-phase immobilization of PLD. The highest activity was observed when PLD was immobilized on the hydrophilic side of JPP (PLD@JPP(W)), 1.9-fold that of free PLD. The catalytic efficiency of PLD@JPP(W) was 1.7-fold that of free PLD, confirmed by the kcat/Km value enhancement. Immobilization on the hydrophilic side also enhanced the thermal stability of PLD. The half-lives of PLD were extended from 4 to 36 h at 40 °C and from 6 to 28 days at 4 °C. Importantly, PLD@JPP(W) showed excellent catalytic efficiency as a PIC system, achieving a PS productivity of 93% within a short time of 2 h at an enzyme dosage of 0.05 mg. PLD@JPP(W) exhibited a 3.6 times higher yield than free PLD in the production of PS from PC rich in Antarctic krill oil. The strategy in this work could also be applied to other lipases, providing a promising method for the efficient conversion of functional lipids.

Hydrophobic Residues Promote Interfacial Activation of Candida rugosa Lipase: A Study of Rotational Dynamics

Microbial lipases constitute a class of biocatalysts with the ability to cleave ester linkages of long-chain triglycerides. This property makes them particularly attractive for industrial applications ranging from food processing to pharmaceutical preparation. Among such enzymes, Candida rugosa lipase (CRL) is one of the most frequently used in biotransformation. A notable feature of CRL, among many lipases, is its propensity for interfacial activation: these enzymes exhibit elevated catalytic rates when acting at the interface between aqueous and hydrophobic phases. Notably, this phenomenon can be attributed to the presence of a mobile lid domain, which in its closed state occludes the enzyme active site. To advance our understanding of interfacial activation, we explore the dynamics of CRL rotation at the octane-water interface in this work. To do so, we employ molecular dynamics and umbrella sampling to evaluate the free energy of rotation of the enzyme at the interface. We identify a global minimum in the rotational landscape that coincides with lid opening at the interface. Additionally, we investigate the role of surface residues outside the lid domain as they serve to instigate rotation of the lid toward the aqueous phase. In doing so, we identify a patch of leucine residues which when mutated to glycine impose a barrier to rotation that maintains the enzyme in the inactive (closed lid) state on the order of 1 μs. Importantly, this study presents a novel quantification of the rotational free energy corresponding to CRL lid opening at the octane-water interface. The accompanying mutagenesis study likewise clarifies the role of hydrophobic surface residues in the transition. As such, this work provides valuable insight into the phenomenon of interfacial activation that might open up new avenues for manipulating the microenvironment of industrially relevant lipases, affording enhanced control over the enzyme state.

Molecular simulations guide immobilization of lipase on nest-like ZIFs with regulatable hydrophilic/hydrophobic surface

The catalytic performance of immobilized lipase is greatly influenced by functional support, which attracts growing interest for designing supports to achieve their promotive catalytic activity. Many lipases bind strongly to hydrophobic surfaces where they undergo interfacial activation. Herein, the behavioral differences of lipases with distinct lid structures on interfaces of varying hydrophobicity levels were firstly investigated by molecular simulations. It was found that a reasonable hydrophilic/hydrophobic surface could facilitate the lipase to undergo interfacial activation. Building on these findings, a novel "nest"-like superhydrophobic ZIFs (ZIFN) composed of hydrophobic ligands was prepared for the first time and used to immobilize lipase from Aspergillus oryzae (AOL@ZIFN). The AOL@ZIFN exhibited 2.0-folds higher activity than free lipase in the hydrolysis of p-Nitrophenyl palmitate (p-NPP). Especially, the modification of superhydrophobic ZIFN with an appropriate amount of hydrophilic tannic acid can significantly improve the activity of the immobilized lipase (AOL@ZIFN-TA). The AOL@ZIFN-TA exhibited 30-folds higher activity than free lipase, and still maintained 82% of its initial activity after 5 consecutive cycles, indicating good reusability. These results demonstrated that nanomaterials with rational arrangement of the hydrophilic/hydrophobic surface could facilitate the lipase to undergo interfacial activation and improve its activity, displaying the potential of the extensive application.

Tailoring the interfacial microenvironment of magnetic metal-organic frameworks using amino-acid-based ionic liquids for lipase immobilization

Modifying the carrier interface is a promising method to improve the microenvironment of immobilized enzymes and enhance their activity and stability. In this work, using proline as amino acid, magnetic metal-organic frameworks (MOFs) were modified with an amino-acid-based ionic liquid (AAIL) with two hydroxyl groups followed by adsorption of porcine pancreatic lipase (PPL). The activity recovery of the prepared immobilized lipase (MMOF-AAIL/PPL) was up to 162 % higher than that of MMOF-PPL (70.8 %). The Michaelis constant of MMOF-AAIL/PPL was 0.0742 mM lower than that of MMOF-PPL, but the catalytic efficiency was 0.0223 min-1 which was higher than MMOF-PPL. Furthermore, MMOF-AAIL/PPL maintained 85.6 % residual activity after stored for 40 days and its residual activity was 71.9 % while that for MMOF-PPL was 58.8 % after incubated in 6 M urea for 2 h. Particularly, after ten consecutive cycles, the residual activity of MMOF-AAIL/PPL still reached 84.4 %. In addition, the magnetic properties of the support facilitate the separation process which improves the utilization efficiency of immobilized enzymes.

Deciphering the immobilization of lipases on hydrophobic wrinkled silica nanoparticles

In this work, the adsorption of Candida antarctica B (CALB) and Rhizomucor miehei (RML) lipases into hydrophobic wrinkled silica nanoparticles (WSNs) is investigated. WSNs are hydrophobized by chemical vapor deposition. Both proteins are homogeneously distributed inside the pores of the nanoparticles, as confirmed by Transmission Electron Microscopy and Energy Dispersive X-ray measurements. The maximum enzyme load of CALB is twice that obtained for RML. Fourier Transform Infrared Spectroscopy confirms the preservation of the enzyme secondary structure after immobilization for both enzymes. Adsorption isotherms fit to a Langmuir model, resulting in a binding constant (KL) for RML 4.5-fold higher than that for CALB, indicating stronger binding for the former. Kinetic analysis reveals a positive correlation between enzyme load and RML activity unlike CALB where activity decreases along the enzyme load increases. Immobilization allows for enhancing the thermal stability of both lipases. Finally, CALB outperforms RML in the hydrolysis of ethyl-3-hydroxybutyrate. However, immobilized CALB yielded 20 % less 3-HBA than free lipase, while immobilized RML increases 3-fold the 3-HBA yield when compared with the free enzyme. The improved performance of immobilized RML can be explained due to the interfacial hyperactivation undergone by this lipase when immobilized on the superhydrophobic surface of WSNs.

Hydrogen-Bonded Supramolecular Nanotrap Enabling the Interfacial Activation of Hosted Enzymes

Engineering nanotraps to immobilize fragile enzymes provides new insights into designing stable and sustainable biocatalysts. However, the trade-off between activity and stability remains a long-standing challenge due to the inevitable diffusion barrier set up by nanocarriers. Herein, we report a synergetic interfacial activation strategy by virtue of hydrogen-bonded supramolecular encapsulation. The pore wall of the nanotrap, in which the enzyme is encapsulated, is modified with methyl struts in an atomically precise position. This well-designed supramolecular pore results in a synergism of hydrogen-bonded and hydrophobic interactions with the hosted enzyme, and it can modulate the catalytic center of the enzyme into a favorable configuration with high substrate accessibility and binding capability, which shows up to a 4.4-fold reaction rate and 4.9-fold conversion enhancements compared to free enzymes. This work sheds new light on the interfacial activation of enzymes using supramolecular engineering and also showcases the feasibility of interfacial assembly to access hierarchical biocatalysts featuring high activity and stability simultaneously.

Energetic and Kinetic Origins of CALB Interfacial Activation Revealed by PaCS-MD/MSM

The conformational dynamics of Candida antarctica lipase B (CALB) was investigated by molecular dynamics (MD) simulation, parallel cascade selection MD (PaCS-MD), and the Markov state model (MSM) and mainly focused on the lid-opening motion closely related to substrate binding. All-atom MD simulation of CALB was conducted in water and on the interface of water and tricaprylin. CALB initially situated in water and separated by layers of water from the interface is spontaneously adsorbed onto the tricaprylin surface during MD simulation. The opening and closing motions of the lid are simulated by PaCS-MD, and subsequent MSM analysis provided the free-energy landscape and time scale of the conformational transitions among the closed, semiopen, and open states. The closed state is the most stable in the water system, but the stable conformation in the interface system shifts to the semiopen state. These effects could explain the energetics and kinetics origin of the previously reported interfacial activation of CALB. These findings could help expand the application of CALB toward a wide variety of substrates.

Climatic Chamber Stability Tests of Lipase-Catalytic Octyl-Sepharose Systems

The application of the climatic chamber presented in this paper to assess the storage stability of immobilized lipases is a new approach characterized by the potential of unifying the study conditions of biocatalysts created in various laboratories. The data achieved from storing lipases in the climatic chambers may be crucial for the chemical and pharmaceutical industry. Our paper describes the developed protocols for immobilization via interfacial activation of lipase B from Candida antarctica (CALB) and lipase OF from Candida rugosa (CRL-OF) on the Octyl-Sepharose CL-4B support. Optimization included buffers with different pH values of 4–9 and a wide range of ionic strength from 5 mM to 700 mM. It has been shown that the optimal medium for the CALB immobilization process on the tested support is a citrate buffer at pH 4 and high ionic strength of 500 mM. Implementing new optimal procedures enabled the hyperactivation of immobilized CALB (recovery activity 116.10 ± 1.70%) under the applicable reaction conditions using olive oil as a substrate. Importantly, CALB storage stability tests performed in a climatic chamber under drastic temperature and humidity conditions proved good stability of the developed biocatalyst (residual activity 218 ± 7.3% of dry form, after 7 days). At the same time, the low storage stability of CRL OF in a climatic chamber was demonstrated. It should be emphasized that the use of a climatic chamber to test the storage stability of a dry form of the studied lipases immobilized on Octyl-Sepharose CL-4B is, to our knowledge, described for the first time in the literature.

Covalent immobilization of lipase on an ionic liquid-functionalized magnetic Cu-based metal-organic framework with boosted catalytic performance in flavor ester synthesis

Enzymatic esterification plays an important role in the fields of chemistry and biotechnology. In this study, lipase was immobilized on an ionic liquid (IL)-modified magnetic metal-organic framework (MOF) and used to synthesize isoamyl acetate. The immobilized lipase (PPL-ILs/Fe₃O₄@MOF) showed 2.1-fold and 1.8-fold higher activity compared to the free and immobilized lipase without ILs (PPL-Fe₃O₄@MOF), respectively. In addition, the anti-denaturant ability and reusability of the PPL-ILs/Fe₃O₄@MOF were also higher than those of other samples. The ester yield reached 75.1% when the biocatalyst was used to synthesize isoamyl acetate in hexane. The synthesized supports supplied a good microenvironment for the immobilized lipase through multiple interactions. Results of the structural analysis showed that the conformation state of lipase molecules changed after immobilization. The magnetism of the prepared biocatalyst makes it easy to recycle so that PPL-ILs/Fe₃O₄@MOF maintained 70.2% of the initial activity after eight cycles. The prepared composite materials exhibited good potential in lipase immobilization with enhanced catalytic ability and stability.