A Superhydrophilic, Light/Microwave-Absorbing Coating with Remarkable Antibacterial Efficacy

Multifunctional electromagnetic wave absorbing carbon fiber/Ti3C2TX MXene fabric with superior near-infrared laser dependent photothermal antibacterial behaviors

Developing multifunctional materials which could simultaneously possess anti-bacterial ability and electromagnetic (EM) absorption ability during medical care is quite essential since the EM waves radiation and antibiotic-resistant bacteria are threatening people's health. In this work, the multifunctional carbon fiber/Ti3C2Tx MXene (CM) were synthesized through repeated dip-coating and following in-situ growth method. The as-fabricated CF/MXene displayed outstanding EM wave absorption and highly efficient photothermal converting ability. The minimum reflection loss (RL) of -57.07 dB and ultra-broad absorption of 7.74 GHz could be achieved for CM composites. By growth of CoNi-layered double hydroxides (LDHs) sheets onto MXene, the absorption bandwidth for carbon fiber/Ti3C2Tx MXene layered double hydroxides (CML) could be reach 5.44 GHz, which could cover the whole Ku band. The excellent photothermal effect endow the CM composites with excellent antibacterial performance. The antibacterials tests indicated that nearly 100 % bactericidal efficiency against E. acoil and S. aureus was obtained for the CM composite after exposure to near-infrared region (NIR) irradiation. This work provides a promising candidate to combat medical device-related infections and EM pollution.

Nanomaterials for Photothermal Antimicrobial Surfaces

Microbial infection diseases are a major threat to human health and have become one of the main causes of mortality. The search for novel antimicrobial strategies is an important challenge for the scientific community, considering also the constant increase of antimicrobial resistance and the rise of new diseases. Among the new strategies to combat microbial infections, the photothermal effect seems to be one of the most promising. Hyperthermia is an effective and broad spectrum strategy for the removal of microbial infections. Among all of the strategies to reduce the diffusion of microbial infections, the preparation of antimicrobial surfaces seems of primary importance. In many cases, in fact, an infection can be diffused through surfaces just by touching them, or by inoculating microbes through an internalizable device, such as an implant, a prosthesis, or a catheter. In this review, we will summarize the recent advances in the preparation of photothermal antibacterial surfaces.

Phytic Acid-Promoted Deposition of Gold Nanoparticles with Grafted Cationic Polymer Brushes for the Construction of Synergistic Contact-Killing and Photothermal Bactericidal Coatings

Medical implants are constantly facing the risk of bacterial infections, especially infections caused by multidrug resistant bacteria. To mitigate this problem, gold nanoparticles with alkyl bromide moieties (Au NPs-Br) on the surfaces were prepared. Xenon light irradiation triggered the plasmon effect of Au NPs-Br to induce free radical graft polymerization of 2-(dimethylamino)ethyl methacrylate (DMAEMA), leading to the formation of poly(DMAEMA) brush-grafted Au NPs (Au NPs-g-PDM). The Au NPs-g-PDM nanocomposites were conjugated with phytic acid (PA) via electrostatic interaction and van der Waals interaction. The as-formed aggregates were deposited on the titanium (Ti) substrates to form the PA/Au NPs-g-PDM (PAP) hybrid coatings through surface adherence of PA and the gravitational effect. Synergistic bactericidal effects of contact-killing caused by the cationic PDM brushes, and local heating generated by the Au NPs under near-infrared irradiation, conferred strong antibacterial effects on the PAP-deposited Ti (Ti-PAP) substrates. The synergistic bactericidal effects reduced the threshold temperature required for the photothermal sterilization, which in turn minimized the secondary damage to the implant site. The Ti-PAP substrates exhibited 97.34% and 99.97% antibacterial and antiadhesive efficacy, respectively, against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), compared to the control under in vitro antimicrobial assays. Furthermore, the as-constructed Ti-PAP surface exhibited a 99.42% reduction in the inoculated S. aureus under in vivo assays. In addition, the PAP coatings exhibited good biocompatibility in the hemolysis and cytotoxicity assays as well as in the subcutaneous implantation of rats.

Dual-Mechanism Tuned Engineered Polyphenols with Cascade Photocatalytic Self-Fenton Reaction for Sustainable Biocidal Coatings

Traditional disposable personal protective equipment (PPE) only blocks pathogenic bacteria by mechanical filtration, with the risk of recontamination and transmission remaining. Herein, inspired by phenolic-enabled nanotechnology (PEN), we proposed engineered polyphenol coatings by plant-derived aromatic aldehydes and metal involvement, denoted as FQM, to obtain the desired photocatalysis-self-Fenton antibacterial performance. Experiments and theoretical analysis proved the dual mechanism of Fe-induced enhancement: (1) tuning of molecular structure realized improved optical properties; (2) Fe(III)/Fe(II) triggered photocatalytic cascade self-Fenton reaction. Mechanism study reveals FQM killing bacteria by direct-contact ROS attack and gene regulation. Further, the FQM was developed as the ideal antibacterial coating on different fabrics (cloth cotton, polyester, and N95 mask), killing more than 93% of bacteria after 5 cycles of use. Such photocatalysis-self-Fenton coatings based on engineered polyphenols endowed with desirable safety, sustainability, and efficient antibacterial features are promising solutions to meet the challenges of the currently available PPE.

Photothermal Superhydrophobic Cotton Fabric Based on Silver Nanoparticles Cross-Linked by Polydopamine and Polyethylenimide

Photothermal materials that can convert solar energy into heat energy through photothermal conversion have attracted extensive attention, but these materials are easily polluted by the environment. Here, we propose a simple and effective strategy for constructing photothermal superhydrophobic cotton fabrics with self-cleaning ability. The PDA@PEI@GA@Ag@PDMS-coated cotton fabric can achieve good superhydrophobicity (water contact angle: 159.6°) by a simple dipping method and mussel-inspired dopamine surface modification, which is regulated by the mass of dopamine, the mass of silver nitrate, and the concentration of polydimethylsiloxane (PDMS). The coated cotton fabric has good physical and chemical stability. Meanwhile, the coated cotton fabric has excellent self-cleaning and antifouling properties. The superhydrophobic PDA@PEI@GA@Ag@PDMS fabric exhibits excellent and stable photothermal properties, with the surface temperature reaching 70.4 °C under simulated sunlight with a current of 20 A. This photothermal superhydrophobic fabric with self-cleaning properties is expected to be applied in the field of photothermal conversion.

Exploring multielement nanogranular coatings to forestall implant-related infections

Introduction

As we approach the post-antibiotic era, the development of innovative antimicrobial strategies that carry out their activities through non-specific mechanisms could limit the onset and spread of drug resistance. In this context, the use of nanogranular coatings of multielement nanoparticles (NPs) conjugated to the surface of implantable biomaterials might represent a strategy to reduce the systemic drawbacks by locally confining the NPs effects against either prokaryotic or eukaryotic cells.

Methods

In the present study, two new multielement nanogranular coatings combining Ag and Cu with either Ti or Mg were synthesized by a gas phase physical method and tested against pathogens isolated from periprosthetic joint infections to address their potential antimicrobial value and toxicity in an in vitro experimental setting.

Results

Overall, Staphylococcus aureus, Staphylococcus epidermidis and Escherichia coli displayed a significantly decreased adhesion when cultured on Ti-Ag-Cu and Mg-Ag-Cu coatings compared to uncoated controls, regardless of their antibiotic resistance traits. A dissimilar behavior was observed when Pseudomonas aeruginosa was cultured for 30 and 120 minutes upon the surface of Ti-Ag-Cu and Mg-Ag-Cu-coated discs. Biofilm formation was mainly reduced by the active effect of Mg-Ag-Cu compared to Ti-Ag-Cu and, again, coatings had a milder effect on P. aeruginosa, probably due to its exceptional capability of attachment and matrix production. These data were further confirmed by the evaluation of bacterial colonization on nanoparticle-coated discs through confocal microscopy. Finally, to exclude any cytotoxic effects on eukaryotic cells, the biocompatibility of NPs-coated discs was studied. Results demonstrated a viability of 95.8% and 89.4% of cells cultured in the presence of Ti-Ag-Cu and Mg-Ag-Cu discs, respectively, when compared to negative controls.

Conclusion

In conclusion, the present study demonstrated the promising anti-adhesive features of both Ti-Ag-Cu and Mg-Ag-Cu coatings, as well as their action in hampering the biofilm formation, highlighting the safe use of the tested multi-element families of nanoparticles as new strategies against bacterial attachment to the surface of biomedical implants.